Engineering Commons^™

Cal Poly Construction Management 2022 Summer Bootcamp Team Service Project, Chris Montero

Construction Management

This paper describes the project logistics and pre-construction planning of the 2022 Cal Poly Construction Management Summer Bootcamp service-learning project, including a plan, schedule, and estimate of materials. The service-learning project will be a wooden park bench for the San Luis Obispo Botanical Gardens. Four teams of six students each will be provided drawings and, throughout the week-long summer camp, each team will have nine hours and thirty minutes to interpret the plans, cut the materials, and build one bench. The first day will consist of a one-hour project introduction that focuses on the fundamentals of plan reading and preparation …

Effectiveness Of Suspended Lead Dampers In Steel Buildings Under Localized Lateral Impact And Vertical Pulsating Load, Herish Abdullah Hussein

Civil & Environmental Engineering Theses & Dissertations

Presented herein is a study of the effectiveness of suspended lead dampers for use in steel buildings under a localized impact load and a vertical pulsating load. A series of lead spheres mounted on a string are suspended inside the building columns or damping panels to absorb the energy of vibration through a collision between the lead dampers and internal surfaces of the members. Experiments are conducted on a three-story steel building model and a cantilever member with suspended lead dampers and subjected to localized impact loading. The cantilever under impact load is analyzed with a partial differential equation of …

Fate And Transport Of The Microbiome In Built Environments, Dahae Seong

Theses and Dissertations

Buildings are complex ecosystems evolving continuously. Indoor components such as occupants, ventilation system, and building structures influence the microbiome. To shed light on how the microbial population in a building will respond to such a fluid system, the fundamental interactions between microbes and the indoor ecosystem must be understood. Buildings are being designed as air-tight structures to save energy; however, this could lead to degradation of indoor air quality through indoor sources of contaminants and/or containment of pollutants in the room or introduce outdoor pollutants indoors depending on the ventilation conditions. In addition, transmission of infectious microbes in indoors threaten …

Highlighting The Unique Challenges And Differences Of Building With Mass Timber, Ryan L. Richmond

Construction Management

As the construction industry shifts towards sustainability and owners seek to construct buildings that are sustainable - built from natural and renewable materials, and pleasing for their occupants to work in - mass timber is becoming the popular alternative to traditional steel and concrete buildings. An abundance of information is available on mass timber products and their properties and applications, but little information on the process of actually building a mass timber project. This report seeks to extend practical knowledge on building with mass timber. In order to accomplish this, this research will highlight specific differences and challenges related to …

Design And Probabilistic Analysis Of Mid- And High-Rise Wood Buildings Subjected To Earthquake Excitations, Shucheng Yang

Electronic Thesis and Dissertation Repository

Mass timber products, such as the glulam or cross laminated timber (CLT), are less frequently used construction materials at present for mid-rise and high-rise buildings. The feasibility and possible advantages of applying timber materials for constructing mid- and high-rise buildings are under investigation. One of the issues that needs to be addressed for the use of heavy timber materials is the safety of such constructions under seismic excitations. To address this issue, the nonlinear inelastic seismic responses and capacity curves of a wood buildings must be assessed. For this, the 10-, 15- and 20-storey buildings are designed using heavy timber …

Building Entry Flood Barrier, Richard Esker, Shannon Mccall, Andrew Udovich, Brian Foust

Williams Honors College, Honors Research Projects

The purpose of this project is to develop a flood barrier that would resist flood water from entering through the doorways of a building. The goal is to mitigate extensive flooding within a structure. After the disastrous weather events that impacted American citizens late in the year of 2017, the team was inspired to develop a project to help disaster victims. Through extensive preliminary and market research, it was discovered that flooding is a serious issue that affects people all over the world. A product to stop flooding could benefit people in developed countries, but it could also help citizens …

Numerical Modeling Of Tornado-Like Vortex And Its Interaction With Bluff- Bodies, Zoheb Nasir

Electronic Thesis and Dissertation Repository

The study the flow structure of tornado-like vortices and their impact over engineering structures is important due to the extent of tornado induced fatalities and damages observed each year in North America and around the world. In the present study, a numerical modeling approach inspired by the WindEEE Dome and the modified version of Ward’s Tornado Simulator has been developed. Using a full-scale numerical simulator, tornadoes of different intensities have been simulated for different swirl ratio values to study flow structures in comparison with previous studies. The effect of topographic features on the tornado-like vortex has been investigated for the …

Numerical Modelling Of Downburst Interaction With Bluff Body, Aditi Jog

Electronic Thesis and Dissertation Repository

The objective of this study is to investigate the interaction of a bluff body with a downburst flow. Numerical investigation of the flow field using CFD analysis was carried out for three different downburst sizes (h/d=1, 2, 4) under suitable boundary conditions subjected to constant jet velocity. The downburst-structure interaction study was conducted for two jet diameters (h/d=1 and 4) and two radial locations from the downburst center.

The results showed that the downburst size greatly dominates the intensity of the flow. The largest downburst resulted in the highest velocity magnitude near the ground and also covered a larger area …

Optimisation Of Cold-Formed Steel Purlin Cross-Sections, Matt Clifford

Theses

The subject of buckling of steel members is introduced and the critical nature of local buckling in slender members is highlighted.

The main thrust of work this semester is an investigation into the following buckling modes:

Flexural buckling;

Lateral torsional buckling;

Torsional buckling;

Shear buckling;

Web buckling;

Distortional buckling;

Local buckling.

This investigation has three main components:

1. Review of theory, books and appropriate published work;

2. Investigation into the relevant parts of Eurocode 3;

3. Finite element analysis using the LUSAS FE program to illustrate the various buckling modes.

Finally, the areas to be covered in the Realisation Stage …

A Quantitative Study Of Robustness Characteristics In Steel Framed Structures, Christopher Herman Raebel

Dissertations (1934 -)

Robustness is a desirable property in any structural design. Robustness may be thought of as the building's inherent structural ability to resist loads other than those anticipated during design. Examples of unanticipated loads are damage to a column or beam due to impact; damage due to the concussion of a blast; strength reduction due to extreme heat during a fire; and localized accidental overload of a beam or column. Each of these events, although very different in their nature, has one major point in common; in each case the path of load resistance changes in a way that was not …

Design And Engineering Of A Tensile Fabric Structure, Jairo Rios

Theses

Fabric structures are designed in an iterative process between architect and engineer, analysis input and output, and detail and patterning. There are three main steps in designing a fabric structure: shape finding, loading, and patterning/ detailing.

Shapefinding consists of finding the shape of the fabric where the fabric forces are in equilibrium. This type of structure is geometrically nonlinear which require iterative analysis to converge on a unique solution.

The loading of the structure is similar to that of any conventional structures. The departure is in the major effects that suction and ponding have on fabric surfaces.

Usually the details …