Open Access. Powered by Scholars. Published by Universities.®

Engineering Commons

Open Access. Powered by Scholars. Published by Universities.®

Bio-oil

Theses/Dissertations

Discipline
Institution
Publication Year
Publication

Articles 1 - 22 of 22

Full-Text Articles in Engineering

Effects Of The Inclusion Of Rice Hull Derived Bio-Oil On Wood Pellet Production, Tyler E. Lowe Dec 2021

Effects Of The Inclusion Of Rice Hull Derived Bio-Oil On Wood Pellet Production, Tyler E. Lowe

Theses and Dissertations

Wood pellet production has become an advancing industry for the sake of reducing greenhouse emissions into the atmosphere especially, in European Union countries. Researchers and industry executives seek new methods and materials to improve the pelletization process. Rice hulls or husks has the potential to aid in wood pelletization as they possess high calorific values. This study focuses on using rice hull derived bio-oil from pyrolysis, which will also decrease ash content, as an additive to aid in the wood pelletization process. Using two groups of rice hull derived bio-oil as an additive in wood pelletization: Group 1 uses heavy …


The Effect Of Moox Reducibility On Its Activity For Anisole Hydrodeoxygenation, Chantal Walker Dec 2020

The Effect Of Moox Reducibility On Its Activity For Anisole Hydrodeoxygenation, Chantal Walker

Electronic Thesis and Dissertation Repository

Catalytic hydrodeoxygenation (HDO) is a process for upgrading crude bio-oil as it has a high oxygen content which causes several undesirable properties. Current methods for HDO use sulfided NiMo and CoMo or supported noble metal catalysts which hydrogenate aromatic rings, leading to less valuable products and increasing the hydrogen consumption. Using 10 wt. % MoO3 supported on ZrO2, TiO2, γ-Al2O3, SiO2 and CeO2, we investigated the atmospheric HDO of anisole, a model compound, at 350 °C. All catalysts achieved C – O bond cleavage, preserving the aromatic ring. In situ UV-Vis spectroscopy showed a peak corresponding to intervalence charge transfer …


Development Of Technologies For High Value Products From Biomass Pyrolysis, Chiara Barbiero Aug 2020

Development Of Technologies For High Value Products From Biomass Pyrolysis, Chiara Barbiero

Electronic Thesis and Dissertation Repository

Phragmites australis (Cav.) Trin. ex. Steud. is an invasive perennial grass found in North America, which is rapidly spreading throughout Ontario, damaging the native ecosystem and endangering the wildlife. This infestation has caused a decrease in biodiversity and nutrient availability to the agricultural crops through competition. One of the most effective management practices is spading them, leaving a huge number of dead stalks that need to be disposed of. Pyrolysis was selected as an alternative thermochemical method to convert this feedstock to value-added bioproducts, such as bio-oil and biochar, and to produce valuable renewable chemicals from the pyrolysis oil, such …


Laboratory Evaluation Of The Impact Of Additives On Asphalt Binders Used In Cold Regions, Neirouz Bouhrira Aug 2020

Laboratory Evaluation Of The Impact Of Additives On Asphalt Binders Used In Cold Regions, Neirouz Bouhrira

Theses and Dissertations

The objective of this research study is to evaluate the effect of additives (polymers, nanomaterials, and softening agents) on rutting, cracking, and fatigue performance of asphalt binders commonly used in cold regions (PG 52-34 and PG 64E-40). In this study, the first phase consisted of using polymers (Styrene-Butadiene-Styrene, Ground-Tire-Rubber) and nanomaterials (TiO2 and SiO2) to modify two asphalt binders used in cold regions (PG52-34 and PG64E-40). The second phase of the study consisted of adding a combination of softening agents (Corn oil or Sylvaroad) with polymers (SBR, Epoxy, and SBS) to PG52-34 asphalt binder. The performance evaluation was conducted using …


Investigations Of Thermal Treatment Of Softwood Kraft Lignin Under Fractional And Ablative Pyrolytic Conditions, Dideolu J. Daniel Oct 2019

Investigations Of Thermal Treatment Of Softwood Kraft Lignin Under Fractional And Ablative Pyrolytic Conditions, Dideolu J. Daniel

LSU Master's Theses

Lignin is second to cellulose in abundance among polymers in nature. Research studies on the development of new products and material combinations in which lignin degradation/conversion products are involved are still in their infancy, because fundamental knowledge about its structure, reactivity, and material and polymer behavior, is still lacking.

The objective of this research study was to investigate the complex thermal deconstruction and mechanistic behavior of a type of technical lignin, known as Kraft lignin, under depolymerization and to develop operating conditions for parameters influencing resulting product yields and operation of pyrolysis reactors.

Softwood Kraft lignin (s-KL) and methanol-fractionated (ex-KL) …


Pyrolysis Of Miscanthus And Products Characterization, Arshdeep Singh Aug 2019

Pyrolysis Of Miscanthus And Products Characterization, Arshdeep Singh

Electronic Thesis and Dissertation Repository

Miscanthus, an invasive crop, has recently gained attention as an emerging energy crop because of certain features such as adaptability to lower temperature, efficient use of water and nutrients, low or no need of nitrogen fertilizers, high biomass yield, fast growing cycle and less intensive agricultural cultivation practices than other energy crops, such as corn.

The literature review is focused on the value-added applications and conversion of Miscanthus for bioenergy and biomaterial applications. The thermochemical conversion technologies reviewed in this chapter include pyrolysis, liquefaction, torrefaction and gasification, whereas biochemical conversion technologies include enzymatic saccharification and fermentation.

In this work, …


Production Of Monomeric Aromatics/Phenolics From Hydrolysis Lignin (Hl) By Catalytic Fast Pyrolysis And Hydrothermal Liquefaction, Hooman Paysepar May 2018

Production Of Monomeric Aromatics/Phenolics From Hydrolysis Lignin (Hl) By Catalytic Fast Pyrolysis And Hydrothermal Liquefaction, Hooman Paysepar

Electronic Thesis and Dissertation Repository

Bio-oil, produced from bio-feedstocks by thermochemical conversion technologies (e.g., pyrolysis or direct liquefaction), can be renewable replacement for petroleum for energy and chemical production. However, bio oil has high oxygen content, low stability, and low heating value. Thus, upgrading of bio-oil is necessary to remove the oxygen and make it a suitable substitute for conventional liquid transportation fuels or for value-added bio-based chemicals. Oxygen in a bio-oil can be removed by catalytic cracking or hydro-de-oxygenation to the form of H2O, CO and CO2 in the presence of a catalyst.

The overall objective of this PhD project was …


Anaerobic Co-Digestion Of Aqueous Liquid From Biosolids Pyrolysis, Seyedfatemeh Seyedi Apr 2018

Anaerobic Co-Digestion Of Aqueous Liquid From Biosolids Pyrolysis, Seyedfatemeh Seyedi

Master's Theses (2009 -)

Pyrolysis is a process to treat biosolids and recover energy. During pyrolysis, conversion of organic matter to energy-rich products yields biochar, py-gas, and pyrolysis liquids (aqueous phase and non-aqueous bio-oil). The aqueous pyrolysis liquid (APL), is a high-COD liquid with no apparent use that contains polycyclic aromatic hydrocarbons and nitrogen-containing compounds. One potential beneficial use of APL is as a co-digestate to produce more biogas for renewable energy from anaerobic digesters at municipal water resource recovery facilities. Some of the organics in APL may be converted to biomethane via anaerobic digestion under proper conditions. However, some APL organics are known …


Pyrolysis Of Fiber-Plastic Waste Blends, Shreyas Kolapkar Jan 2018

Pyrolysis Of Fiber-Plastic Waste Blends, Shreyas Kolapkar

Dissertations, Master's Theses and Master's Reports

The main objective of this work is to investigate fast pyrolysis of fiber and plastic feedstocks in order to understand the synergistic effect from their co-pyrolysis. In this on-going work, fiber, plastic and their blend are characterized and pyrolysis oil is produced from them in the fast batch pyrolysis reactor. Based on a heat transfer model it is shown that results of oil produced from batch reactor will be applicable to the continuous paddle reactor. From feedstock characterization, chlorine was observed particularly in the plastic feedstock. Thus, chlorine removal method using torrefaction and high shear mixing was implemented and was …


Value Added Products From Lignin And Biomass Derivatives, Chen Li Jan 2018

Value Added Products From Lignin And Biomass Derivatives, Chen Li

Civil & Environmental Engineering Theses & Dissertations

Pyrolysis is one of the traditional lignin and biomass utilization methods. The liquid products bio-oil and solid products bio-char are the main value-added products from lignin pyrolysis. Due to the narrow application and low quality, using the pyrolysis method to produce bio-oil and bio-char cannot bring sufficient economic benefits. In this dissertation, two methods were investigated to improve the quality of lignin bio-products.

Instead of direct pyrolysis, chemical activation (pyrolysis) was introduced in this dissertation. Compared to bio-char, the lignin chemical activation product lignin-activated-carbon has better economic value. With the best activation conditions, the lignin-activated-carbon produced a surface area of …


Production Of Bio-Oil With Different Oxygen Content And Characterization Of Catalytic Upgrading To Transportation Fuel, Mubarak Mohammed Khlewee Dec 2017

Production Of Bio-Oil With Different Oxygen Content And Characterization Of Catalytic Upgrading To Transportation Fuel, Mubarak Mohammed Khlewee

Electronic Theses and Dissertations

The world’s increasing population requires an increase in transportation fuel production. The lack of production of transportation fuels due to the shortage of fossil fuel resources combined with concerns about global emissions of carbon dioxide from fossil fuel combustion are the two major issues that have driven researchers to actively pursue alternative sources for oil production. Biomass is being considered as an alternative feedstock to produce fuel and chemicals due to its abundance and renewability. It has many features that make it suitable as a source of transportation fuel production. However, the bio-oil produced by the fast pyrolysis process has …


Catalytic Pyrolysis Of Poly Vinyl Chloride As A Viable Way Of Waste Management, Randy Santos, Foster A. Agblevor Aug 2016

Catalytic Pyrolysis Of Poly Vinyl Chloride As A Viable Way Of Waste Management, Randy Santos, Foster A. Agblevor

All Graduate Plan B and other Reports, Spring 1920 to Spring 2023

The main purpose of this investigation is to achieve the dechlorination and cracking of PVC producing a low chlorinated oil using a single step process; finding and using a suitable adsorbent that captures the chlorine released in the decomposition of the Poly Vinyl Chloride in the solid phase; then use the adsorbent to enhance red mud chlorine absorption activity. Find an alternative viable use for the waste PVC and red mud that will reduce landfilling. Calcium Hydroxide was selected as the main chlorine adsorbent since it captured 75% chlorine in the solid phase. The calcium hydroxide was mixed with red …


Experimental Investigation Of Fast Pyrolysis Of Arundo Donax In A Novel Paddle Reactor, Chintan Desai Jan 2016

Experimental Investigation Of Fast Pyrolysis Of Arundo Donax In A Novel Paddle Reactor, Chintan Desai

Dissertations, Master's Theses and Master's Reports

The main objective of this research was to show the effectiveness of a novel paddle reactor for fast pyrolysis and study the effect of biomass particle size and reaction temperature of Arundo Donax a type of energy crop on the bio-oil yields. The novel paddle reactor showed effective mixing and heat transfer which were proved with the help of studying the residence time and the heating characteristics of the system respectively. The effect of different biomass particle sizes on the bio-oil yield was not significant, the bio-oil yield was approximately 50% for all the sizes. For Arundo Donax particle sizes …


Application Of Mechanically Fluidized Reactors To Lignin Pyrolysis, Valentina Lago Apr 2015

Application Of Mechanically Fluidized Reactors To Lignin Pyrolysis, Valentina Lago

Electronic Thesis and Dissertation Repository

Lignin has great potential for the production of aromatics currently derived from petroleum, since it is the most abundant source of aromatics in nature. At present, Kraft lignin is used as fuel within the pulping process but, alternatively, it could be converted to high-value chemicals using thermochemical processes such as pyrolysis. Kraft lignin, however, is a very cohesive and thermally sensitive powder with foaming and agglomerating tendency under reaction conditions. Therefore, new reactor designs are necessary to efficiently process this raw material.

Consequently, a novel reactor design, designated as Mechanically Fluidized Reactor (MFR) has been developed to successfully process Kraft …


Thermo-Catalytic Upgrading Of Pyrolysis Vapors Using Electromagnetic Heating, Pranjali Devidas Muley Jan 2015

Thermo-Catalytic Upgrading Of Pyrolysis Vapors Using Electromagnetic Heating, Pranjali Devidas Muley

LSU Doctoral Dissertations

Electromagnetic heating offers several advantages such as rapid heating rates, accurate temperature control and energy efficiency over conventional reactors. The goal of this study was to design an effective and energy efficient catalytic reactor for pyrolysis vapor upgrading. An induction based catalytic reactor was designed for upgrading of pyrolysis vapors. The effect of catalyst bed temperatures (290°, 330° and 370°C) and biomass to catalyst ratios of 1, 1.5 and 2 was studied. The results were compared to conventional heating reactor. Induction heating reactor performance exceeded that of conventional heater. The biomass to catalyst ratio of 2 in combination with the …


Upgrading Of Fast Pyrolysis Oil Via Hdo Using Nano-Structured Catalysts, Shima Ahmadi Aug 2014

Upgrading Of Fast Pyrolysis Oil Via Hdo Using Nano-Structured Catalysts, Shima Ahmadi

Electronic Thesis and Dissertation Repository

The effects of type of solvents (hydro-treated or upgraded pyrolysis oil and ethanol) on hydro-de-oxygenation (HDO) of fast pyrolysis oil were studied. The presence and the type of solvent were found to be effective for prevention or reduction of self-polymerization during the bio-oil HDO process. Using ethanol as the solvent had superior performance in terms of the heating value, molecular weight and elemental composition of the upgraded oil products, compared to using hydro-treated oils as the solvent. Furthermore, novel CoMo catalysts supported on nano-structured materials including MCM-41 and SBA-15 were synthesized and tested on HDO of fast pyrolysis oil in …


A Study Of Induction Pyrolysis Of Lignicellulosic Biomass For The Production Of Bio-Oil, Charles Edward Henkel Jan 2014

A Study Of Induction Pyrolysis Of Lignicellulosic Biomass For The Production Of Bio-Oil, Charles Edward Henkel

LSU Master's Theses

The increasing demand for energy coupled with a growing concern that the combustion of fossil fuels has on the environment, through the production of greenhouse gases, has created a demand for renewable energy sources. The demand for renewable energy, particularly liquid transportation fuels, can be met in part by the use of biomass based liquid fuels. There are several methods that can be used to produce biomass based fuels, but only thermochemical conversion (pyrolysis) can readily convert lignocellulosic biomass into a fuel-like liquid, bio-oil. The pyrolytic conditions for obtaining maximum liquid yields vary, but many of the criteria can be …


Development And Applications Of A Novel Intermittent Solids Feeder For Pyrolysis Reactors, Federico M. Berruti Sep 2013

Development And Applications Of A Novel Intermittent Solids Feeder For Pyrolysis Reactors, Federico M. Berruti

Electronic Thesis and Dissertation Repository

This PhD research addresses the challenge of feeding biomass residues into fluidized bed reactors for pyrolysis, through the development of a novel intermittent solid slug feeder, both for laboratory-scale and large-scale reactors. The new feeder can successfully handle biomass residues that are either too cohesive or thermally sensitive for traditional feeders.

To optimize the novel feeder performance, a model for the pulsating solids flow was developed from experimental data collected with ideal slugs, as well as real biomass flow. The model was validated using both a laboratory-scale (< 10 kg/hr) and large-scale feeder (> 250 kg/hr). Several important variables were identified. They include the material flow …


The Laboratory Evaluation Of Bio Oil Derived From Waste Resources As Extender For Asphalt Binder, Xu Yang Jan 2013

The Laboratory Evaluation Of Bio Oil Derived From Waste Resources As Extender For Asphalt Binder, Xu Yang

Dissertations, Master's Theses and Master's Reports - Open

A shortage of petroleum asphalt is creating opportunities for engineers to utilize alternative pavement materials. Three types of bio oils, original bio oil (OB), dewatered bio oil (DWB) and polymer-modified bio oil (PMB) were used to modify and partially replace petroleum asphalt in this research. The research investigated the procedure of producing bio oil, the rheological properties of asphalt binders modified and partially replaced by bio oil, and the mechanical performances of asphalt mixtures modified by bio oil. The analysis of variance (ANOVA) is conducted on the test results for the significance analysis. The main finding of the study includes: …


Fractional Condensation Of Bio-Oil Vapors, Akhil Tumbalam Gooty Dec 2012

Fractional Condensation Of Bio-Oil Vapors, Akhil Tumbalam Gooty

Electronic Thesis and Dissertation Repository

The research project described in this thesis deals with an investigation on the fractional condensation of bio-oil vapors to improve the separation of some of the key components of the bio-oil and, consequently, improve the properties and the value of each of the separated product streams.

In the first part, the separation of a mixture of three model compounds of bio-oil from a vapor and carrier gas stream was investigated with the help of a series of three condensers maintained at different temperatures. The practical performance of the fractional condensation train was improved by comparing the experimental results with the …


Gasification Of Bio-Oils To Syngas In Fluidized Bed Reactors, Mohammad Latifi Apr 2012

Gasification Of Bio-Oils To Syngas In Fluidized Bed Reactors, Mohammad Latifi

Electronic Thesis and Dissertation Repository

Bio-fuels are renewable and clean which can be used as alternatives to fossil fuels or can be used in combination with them. Biomass is a main source of bio-fuels production: it is a renewable resource and its conversion to energy releases no net CO2 to the environment.

Bio-oil, the valuable liquid product obtained from biomass through pyrolysis, may be either combusted to generate carbon-neutral electricity or converted to a synthesis gas from which chemicals or clean fuels can be produced. Producing bio-oil from biomass and then converting the bio-oil to syngas has several advantages: The bio-oil may be generated …


Pyrolysis Oils: Characterization, Stability Analysis, And Catalytic Upgrading To Fuels And Chemicals, Tushar Vispute Feb 2011

Pyrolysis Oils: Characterization, Stability Analysis, And Catalytic Upgrading To Fuels And Chemicals, Tushar Vispute

Open Access Dissertations

There is a growing need to develop the processes to produce renewable fuels and chemicals due to the economical, political, and environmental concerns associated with the fossil fuels. One of the most promising methods for a small scale conversion of biomass into liquid fuels is fast pyrolysis. The liquid product obtained from the fast pyrolysis of biomass is called pyrolysis oil or bio-oil. It is a complex mixture of more than 300 compounds resulting from the depolymerization of biomass building blocks, cellulose; hemi-cellulose; and lignin. Bio-oils have low heating value, high moisture content, are acidic, contain solid char particles, are …