Engineering Commons^™

Development Of A Mobile 100 Kg/H Plant For Pyrolysis Using A Mechanically Fluidized Reactor, Dhiraj Kankariya, Stefano Tacchino, Dominic Pjontek, Franco Berruti, Cedric Briens

5th International Congress on Green Process Engineering (GPE 2016)

Current pyrolysis processes perform the thermal decomposition of biomass into a liquid bio-oil, bio-char and non-condensable gases, at around 500 °C, without the addition of oxygen gas. The bio-oil is a complex mixture of many components that is used either as a substitute for fuel oil or for applications such as liquid smoke and bio-phenol resins that do not require pure chemicals.

The large-scale mechanical fluidized reactor (MFR) is a new technology for the pyrolysis of biomass developed by ICFAR, which does not require a sand bed and, thus, provides an undiluted solid char residue, which is essential to realize …

Catalytic Property Of Olivine For Bio-Oil Gasification, Mohammad Latifi, Franco Berruti, Cedric Briens

5th International Congress on Green Process Engineering (GPE 2016)

Introduction

Biomass is an attractive renewable source of fuel and energy. Thermochemical processes can convert biomass to a liquid bio-oil or to a syngas. The advantage of using bio-oil as an intermediate is that, in contrast with both raw biomass and gas, it can easily be produced in small distributed units, stored and transported. Not only can platform chemicals and clean fuels be produced from syngas, but hydrogen is itself an alternative fuel. A high hydrogen production is usually desired: for example, methanol production requires a syngas with a molar H₂/CO ratio of 2. Therefore, maximum hydrogen production …

Fundamental Study And Applications To Biomass Pyrolysis Of The Mechanically Fluidized Reactor, Valentina Lago, Franco Berruti, Cedric Briens

5th International Congress on Green Process Engineering (GPE 2016)

Lignin has great potential for the production of aromatics currently derived from petroleum, since it is the most abundant source of aromatics in nature. At present, Kraft lignin is used as fuel within the pulping process but, alternatively, it could be converted to high-value chemicals using thermochemical processes such as pyrolysis. Kraft lignin, however, is a very cohesive and thermally sensitive powder with foaming and agglomerating tendency under reaction conditions. Consequently, a novel reactor design, designated as Mechanically Fluidized Reactor (MFR) has been developed to successfully process Kraft lignin.

Please click Additional Files below to see the full abstract.

Hydrothermal Treatment Of Bio-Oil For The Production Of Biodiesel Antioxidants, Noemí Gil-Lalaguna, Ana Bautista, Lucía Botella, Alberto Gonzalo, José Luis Sánchez, Jesús Arauzo

5th International Congress on Green Process Engineering (GPE 2016)

1. INTRODUCTION

Fuel consumption is inevitable for industrial development and growth of any country. In the last years, diesel fuels have gained an increasingly important role in the transportation sector. However, the rapid depletion of crude oil resources, as well as the worldwide concern about the environmental damage related to the increase in the emissions of carbon dioxide and other pollutants, has led to an increasing awareness about the development and use of renewable fuels. In this context, biodiesel appears as a good alternative to fossil diesel because of its renewable and biodegradable character, also being a non-toxic and clean fuel …