Engineering Commons^™

Integration Of Infrared Thermography And Deep Learning For Real-Time In-Situ Defect Detection And Rapid Elimination Of Defect Propagation In Material Extrusion, Asef Ishraq Sadaf

Electronic Theses and Dissertations

This study presents a novel approach to overcoming process reliability challenges in Material Extrusion (ME), a prominent additive manufacturing (AM) technique. Despite ME's advantages in cost, versatility, and rapid prototyping, it faces significant barriers to commercial-scale production, primarily due to quality issues such as overextrusion and underextrusion, which compromise final part performance. Traditional manual monitoring methods severely lack the capability to efficiently detect these defects and highlight the necessity for an efficient and real-time monitoring solution. Considering these challenges, an innovative and field-deployable infrared thermography-based in-situ real-time defect detection and feedback control system is proposed in this thesis. A novel …

An Investigation Into Applications Of Canonical Polyadic Decomposition & Ensemble Learning In Forecasting Thermal Data Streams In Direct Laser Deposition Processes, Jonathan Storey

Theses and Dissertations

Additive manufacturing (AM) is a process of creating objects from 3D model data by adding layers of material. AM technologies present several advantages compared to traditional manufacturing technologies, such as producing less material waste and being capable of producing parts with greater geometric complexity. However, deficiencies in the printing process due to high process uncertainty can affect the microstructural properties of a fabricated part leading to defects. In metal AM, previous studies have linked defects in parts with melt pool temperature fluctuations, with the size of the melt pool and the scan pattern being key factors associated with part defects. …

Upcyclying Of Polyethylene Terephtalate By Addition Of Thermoplastic Elastomer, Diego Francisco Bermudez

Open Access Theses & Dissertations

Continual overconsumption of single-use plastics has generated challenges of solid waste management across the United States. Common plastic waste management solutions, such as landfill, have caused the migration of contaminants into the environment consequently affecting not only the health of wildlife, but also that of human beings. Alternative strategies for the handling of single-use plastic such as polyethylene terephthalate (PET), used in the food packaging industry, can ultimately help mitigate the noxious consequences of single-use plastics affecting entire ecosystems. This study demonstrates a potential avenue of materials upcycling by studying the effects of coupling PET with the thermoplastic elastomer styrene-ethylene-butylene-styrene …

Ultrasonic Non-Destructive Evaluation Of Additively Manufactured Polymer-Ceramic Composites, Christian Alexander Ruiz

Open Access Theses & Dissertations

Digital light processing (DLP) is an attractive additive manufacturing technique due to its ability to create ceramic parts with complex geometries. DLP uses ultraviolet light to polymerize a slurry comprised of ceramic powder and photosensitive resin in layers to create solid parts. Printing parameters such as light intensity and exposure time are critical when producing these parts. Improper parameters can lead to over or under-curing, adversely impacting print quality and strength. Samples were printed at varying layer exposure times and then tested using ultrasonics to determine the degree of conversion. Additionally, ultrasonics were used as a non-destructive technique to obtain …

Additive Manufacturing Of Composites For Sensing And Harsh Environments Application, Md Sahid Hassan

Open Access Theses & Dissertations

Composite materials are made by combining two or more materials, such as fibers and resins to create a material system that has improved mechanical and physical properties compared to its individual components. The use of 3D printing technology in composite manufacturing allows for the creation of complex and custom shapes with precise control over the placement of the materials. This makes it possible to create composite parts with enhanced performance characteristics and reduced weight. The work presented in this dissertation lies in the design and development of highly flexible impact propagation sensor through material extrusion 3D printing technique. By using …

Development Of A Potassium Permanganate Catalyst-Infused Fuel Grain For Hydrogen Peroxide Hybrid Thruster Ignition Enhancement, Ryan J. Thibaudeau

All Graduate Theses and Dissertations, Fall 2023 to Present

This thesis describes and addresses the need for reliable ignition in small satellite hybrid propulsion systems using hydrogen peroxide. It describes process of creating custom 3D printed ABS plastic fuel grains with small amounts of catalysts. These catalysts lead to a more reliable and energy-efficient ignition of a hybrid rocked propulsion system using catalyst-infused ABS and high-test hydrogen peroxide (HTP). Hydrogen peroxide is a high-density oxidizer and therefore more volumetrically efficient for a small satellite using hybrid rocket technology when compared to gaseous oxygen (GOX). The traditional ignition methods of hybrid rocket propulsion systems using HTP are compared to and …

Design, Fabrication, And Integration Of Robotic Skin Sensors For Human Robot Interaction., Olalekan Olakitan Olowo

Electronic Theses and Dissertations

Enhancing physical human-robot interaction in modern robotics relies on refining the tactile perception of robot skin sensors. This research focuses on crucial aspects of the development process, including fabrication techniques, miniaturization, and integration for a more efficient collaborative human-robot interface. The fabrication process of robot skin sensors, designed to mimic human skin, is explored both within and outside cleanroom environments. An enhanced technique is presented to increase fabrication yield and create more miniaturized sensor designs with feature sizes in the tens of microns. These sensors function as piezoresistive arrays using organic polymers like PEDOT: PSS as the pressure-sensing medium. Various …

Advancing Additive Manufacturing For Biomedical Applications: Antimicrobial And X-Ray Absorptive Composite Filaments For Fused Filament Fabrication, John M. Arnold Jr

University of New Orleans Theses and Dissertations

The objective of this research was to investigate the use of nano- and microparticle amendments for the creation of Poly-lactic Acid composite materials for use in biomedical applications using the Fused Filament Fabrication process of Additive Manufacturing. Composites were created with the goal of imparting the useful properties of antimicrobial activity and x-ray absorption to the material. In addition to testing the efficacy of the particle amendments in achieving the desired properties, the thermal and mechanical properties of the composite materials were tested to ensure that the composites would be compatible with the Fused Filament Fabrication process and would produce …

Damage Detection With An Integrated Smart Composite Using A Magnetostriction-Based Nondestructive Evaluation Method: Integrating Machine Learning For Prediction, Christopher Nelon

All Dissertations

The development of composite materials for structural components necessitates methods for evaluating and characterizing their damage states after encountering loading conditions. Laminates fabricated from carbon fiber reinforced polymers (CFRPs) are lightweight alternatives to metallic plates; thus, their usage has increased in performance industries such as aerospace and automotive. Additive manufacturing (AM) has experienced a similar growth as composite material inclusion because of its advantages over traditional manufacturing methods. Fabrication with composite laminates and additive manufacturing, specifically fused filament fabrication (fused deposition modeling), requires material to be placed layer-by-layer. If adjacent plies/layers lose adhesion during fabrication or operational usage, the strength …

Investigating The Effect Of Bead Geometry On Fiber Orientation And Thermomechanical Properties For Large-Format Extrusion-Based Additive Manufacturing, Joanna F. Keaton

Electronic Theses and Dissertations

In large-format extrusion-based additive manufacturing of polymer composites, the relationship between material properties and processing parameters requires further investigation. This thesis focuses on the relationship between fiber orientation and thermomechanical properties for short fiber-filled thermoplastic polymer systems manufactured by extrusion-based additive manufacturing. Fiber orientation is particularly important in determining the thermomechanical properties of the composite material as properties in the direction of deposition are expected to be higher for highly aligned fibers than randomly aligned fibers. Fiber orientation distribution, which is related to processing parameters and deposition conditions, can be efficiently represented by the orientation tensor. The orientation tensor can …

Mechanical Characterization Of Automated Fiber Placement And Additive Manufacturing Hybrid Composites, Lucan Haviland

Electronic Theses and Dissertations

This thesis presents the optimization of processing parameters based on the mechanical properties of Continuous Fiber-Reinforced Thermoplastic (CFRTP) Unidirectional (UD) consolidated tapes. The UD tapes were consolidated using an AFP head and a thermoforming press for comparison. The adhesive strength of hybrid parts consisting of CFRTP UD tape bonded to a 3D-printed substrate with the same matrix system were investigated. Large Area Additive Manufacturing (LAAM) was utilized for the 3D-printed parts. Different types of thermoplastic composite materials were explored, including Glass Fiber reinforced Polyethylene Terephthalate Glycol (GF/PETG), Carbon Fiber reinforced Polyethylene Terephthalate Glycol (CF/PETG), Carbon Fiber reinforced Polycarbonate (CF/PC), and …

Additive Manufacturing Of High-Performance Nanolamellar Eutectic High-Entropy Alloys, Jie Ren

Doctoral Dissertations

Additive manufacturing, also called three-dimensional (3D) printing, is an emerging technology for printing net-shaped components layer by layer for applications in automotive, aerospace, biomedical and other industries. In addition to the vast design freedom offered by this approach, metal 3D printing via laser powder-bed fusion (L-PBF) involves large temperature gradients and rapid cooling and provides exciting opportunities for producing microstructures and mechanical properties beyond those achievable by conventional processing routes. Although these extreme printing conditions enable microstructural refinement to the nanoscale for achieving high strength. However, high-strength nanostructured alloys by laser additive manufacturing often suffer from limited ductility. Eutectic high-entropy …

Fatigue And Fracture Of Electron Beam Melting Ti-6al-4v, William A. Grell

Electronic Theses and Dissertations

For applications in the aerospace field, selection of materials for a given design requires an understanding of critical properties, like fatigue and fracture, in addition to static mechanical and physical properties. With the ongoing advancements in metallic additive manufacturing techniques and the interest in applying the process to aerospace applications, there is a clear need to fully characterize properties. Arguably, the most attractive alloy for applications in aerospace is the Ti-6Al-4V alloy. The current dissertation examines the mechanical properties of the alloy, made by the Electron Beam Melting (EBM) Powder Bed Fusion (PBF) method. As illustrated in this work, the …

Design Of Machine Tool Cross Beam Using Metal Big Area Additive Manufacturing, Tyler Poon

Masters Theses

The modern world would not be what it is now without machine tools. Advances in materials and processes, such as carbon fiber and additive manufacturing (AM), enable the design space for machine tool components to expand. However, machine tool components require accurate geometry, which is not available from parts produced by metal Big Area Additive Manufacturing (mBAAM). This project outlines the process in which a traditionally manufactured machine tool component, a welded box structure on an existing machine tool, was redesigned to be made using mBAAM. The goal was to design a structure that was printable using the MedUSA system …

Creep Resistance And Microstructure In Binary Aluminum Cerium Alloy Produced By Laser Powder Bed Fusion, Jillian Ann Stinehart

Master's Theses (2009 -)

Currently, the only commercially available aluminum alloy for additive manufacturing (AM) is AlSi10Mg, which is not suitable for high temperature applications. Al-Ce based alloys have been shown to be highly printable, cost-efficient alloys. Compared to cast Al-Ce alloys, the eutectic features are refined (<1μm), which give AM Al-10Ce favorable strength and ductility at room temperature. The low diffusivity and solubility of cerium in aluminum improve the retention of mechanical properties at high temperatures. In order to quantify the effect of cerium on the thermal stability of AM aluminum and show its suitability for high-temperature applications, Al-10Ce was creep tested between 60-77% of its absolute melting temperature. The creep performance of AM Al-10Ce was favorable compared to that of cast binary Al-Ce and AM AlSi10Mg and was comparable to that of cast ternary Al-Ce alloys. The stress exponent, n, was approximately 1 in the low stress regime and 5-7 in the high stress regime. The activation energy was 231kJ/mol. In comparison, both cast binary Al-Ce and AM AlSi10Mg have higher stress exponents and lower activation energies, showing AM Al-10Ce to be more creep resistant. After creep testing, slight grain coarsening was observed, while grain orientation remained unchanged. The melt pool boundaries (MPBs) faded in appearance after creep testing, and the number of columnar grains decreased.

Image Segmentation With Human-In-The-Loop In Automated De-Caking Process For Powder Bed Additive Manufacturing, Vincent Opare Addo Asare-Manu

Theses and Dissertations

Additive manufacturing (AM) becomes a critical technology that increases the speed and flexibility of production and reduces the lead time for high-mix, low-volume manufacturing. One of the major bottlenecks in further increasing its productivity lies around its post-processing procedures. This work focuses on tackling a critical and inevitable step in powder-bed additive manufacturing processes, i.e., powder cleaning or de-caking. Pressing concerns can be raised with human involvement when performing this task manually. Therefore, a robot-driven automatic powder cleaning system could be an alternative to reducing time consumption and increasing safety for AM operators. However, since the color and surface texture …

Monitoring Additive Manufacturing Machine Health, Jeremy Hale

Doctoral Dissertations

Additive manufacturing (AM) allows the production of parts and goods with many benefits over more conventional manufacturing methods. AM permits more geometrically complex designs, custom and low-volume production runs, and the flexibility to produce a wide variety of parts on a single machine with reduced pre-production cost and time requirements. However, it can be difficult to determine the condition, or health, of an AM machine since complex designs can increase the variability of part quality. With fewer parts produced, destructive testing is less desirable and statistical methods of tracking part quality may be less informative. Combined with the relatively more …

Correlating Large-Format Additive Manufacturing Processing Parameters To Fiber Length And The Mechanical Performance Of Reinforced Polymer Composites, Andrew Phillip Rhodes

Masters Theses

The Big Area Additive Manufacturing (BAAM) system at Oak Ridge National Laboratory has been used to produce carbon fiber reinforced structures for several years, including vehicles, building constituents, composite tooling, etc. While the development of a large-format polymer additive manufacturing (AM) system has moved quickly, the impact of the BAAM’s extruder on the length of carbon fiber feedstock has not been systematically studied. Numerous studies in processing fiber reinforced thermoplastics in plasticizing and injection molding systems have shown that fibers are subjected to significant shear as they are processed, which can cause a drastic reduction in fiber length which negatively …

Fusion Bonding Behavior Of 3d Printed Pa6/Cf Composites Via Post Fabrication Compaction, Gonzalo Fernandez Mediavilla

Mechanical & Aerospace Engineering Theses & Dissertations

Additive manufacturing (AM) is becoming a robust production technology for aerospace, healthcare, and construction industries among others. Fused Deposition Modelling (FDM) is one of the methods most used to 3D print products. FDM has limitation due to interlayer adhesion and restriction imposed by the printing direction. Specially with AM composites, as reinforced nylon PA6 with short fibers, parts show more strength along the direction of the filament due to the alignment of the carbon fibers, but weaker in other directions. The proposed method to solve this issue is to print parts separately and join them together by fusion bonding. PA6/CF …

Development Of A Regeneratively Cooled Liquid Rocket Engine, Dillon Petty, Nicole Zimmerli

Williams Honors College, Honors Research Projects

An additively manufactured (AM) liquid rocket engine, consisting of an injector, combustion chamber, and nozzle, was designed and printed using state-of-the-art methods and materials. The parts were manufactured using laser powder bed fusion. Additive manufacturing allowed for complex geometries and features, such as printing manifolds onto the components with a reduced number of parts. Additive, regenerative cooling channels were designed into the chamber and nozzle to allow for long-duration steady-state operation.

The feed system for the engine was designed and built to allow for pressure-regulated and steady-state testing. Tanks for the fuel and oxidizer were designed and built for a …

Multimaterial, Core-Shell Direct Ink Writing Of Flexible Strain Sensors For Pneumatically-Actuated Soft Robotic Hinge Joints, John Michael Burke

Graduate Theses, Dissertations, and Problem Reports

Direct ink writing (DIW) provides for an expansive material library and the ability to print multiple materials with tailored functionalities in a controllable and single-step process. Particularly beneficial is the net shape printing under ambient conditions of a wide range of materials normally incompatible with one another. Coaxial DIW is a 3D printing technique that allows for two dissimilar inks to be extruded simultaneously in a co-flow manner. In this work, custom-designed coaxial nozzles were 3D-printed using a stereolithography printer. Composite inks comprised of thermoplastic polyurethane and silver were developed and studied. The coaxial nozzles were then used to co-extrude …

Part Design Geometry-Driven Toolpath Optimization For Additive Manufacturing Energy Sustainability Improvement, David Kolawole Somade

Graduate Research Theses & Dissertations

One of the most promising new manufacturing technologies in the past three decades isadditive manufacturing (AM), also commonly known as three-dimensional (3D) printing or rapid prototyping. The energy consumption problem in AM can be significant when it is adopted at the industrial scale or used under resource-restricted conditions. The energy consumption of an AM process is influenced by several factors including bed heating, filament extrusion, material infill, component cooling, etc. All these factors are further determined by the equipment and the toolpath for a specific printing task. Build orientation and tool-path direction are frequently used to optimize part and process …

Additively Manufactured Polymeric Surface-Based Lattice Structures For Vibration Attenuation, Imabin Kelvin Ekpelu

Browse all Theses and Dissertations

The focus of this study was to select triply periodic minimal surface (TPMS) structures made of 3D-printed polymers. The primary variables in this study were: TPMS shape, lattice volume ratio, and lattice material. Vibration absorption was characterized by damping ratio via transmissibility at the system’s natural frequency. The vibration testing was performed using an electro-dynamic shaker, a known mass, an input/control accelerometer, and an output/response accelerometer. The 3D-printed absorber/lattice was mounted to the shaker baseplate and a mass will be mounted on top of the absorber. One accelerometer will be mounted to the shaker baseplate and the other will be …

Material Extrusion-Based Additive Manufacturing: G-Code And Firmware Attacks And Defense Frameworks, Haris Rais

Theses and Dissertations

Additive Manufacturing (AM) refers to a group of manufacturing processes that create physical objects by sequentially depositing thin layers. AM enables highly customized production with minimal material wastage, rapid and inexpensive prototyping, and the production of complex assemblies as single parts in smaller production facilities. These features make AM an essential component of Industry 4.0 or Smart Manufacturing. It is now used to print functional components for aircraft, rocket engines, automobiles, medical implants, and more. However, the increased popularity of AM also raises concerns about cybersecurity. Researchers have demonstrated strength degradation attacks on printed objects by injecting cavities in the …

Enhanced Performance Of 3d Electroactive Polymer Transducers Via Hierarchical Structures, Frederick B. Holness

Electronic Thesis and Dissertation Repository

Conjugated polymers (CPs) are a class of polymers that exhibit a change in size or shape in response to electrical stimuli. The unique combination of electrical and mechanical properties facilitates the fabrication of novel devices in a broad range of applications including: sensors, actuators, and lab-on-a-chip systems. The alternating single and double bonds along the polymer chain of CPs enables their electroactive properties but is also responsible for processability associated with CPs that has limited fabrication methods. Recently a photosensitive CP composite enabling additive manufacturing (AM) of 3D CP structures was developed. However, the introduction of a copolymer for mechanical …

A Study On Early Age Properties Of Concrete For Precast And 3d Printing, Debalina Ghosh

Doctoral Dissertations

Concrete is the second-most consumed material, leading the global Portland cement production of 4.1 billion tons in 2020 and 5-8% of global Carbon dioxide (CO₂) emission annually. As with any other material and practice, the construction industry is also ever-changing to meet market demand, evolving technology, and resource limitation. In the case of concrete construction, one of the main concerns is the lack of automation. In the last few decades, some new construction methods have risen to address this concern. Some of these economic and successful practices are precast construction, self-compacting concrete (SCC), and 3D printing of concrete(3DPC). …

A Numerical Simulation Of The Powder Bed Additive Manufacturing Process With Molecular Dynamics Simulation, Yeasir Mohammad Akib

Theses and Dissertations

Many manufacturing industries utilize powder bed fusion (PBF) since it can produce microscale precision 3D parts. During PBF, powder particles are selectively fused layer by layer using thermal energy. The build quality in the PBF process relies heavily on powder bed properties and thermal energy deposition. Powder flowability, spreadability, and packing fraction are some of the insightful factors that determine the quality of the powder bed. In this study, a two-dimensional powder bed is developed using the LAMMPS package. A cloud-based pouring of powders with varying volumes and initialization is adopted for the work. A blade-type and circular recoater is …

Optimized 3d-Printing Of Carbon Fiber-Reinforced Polyether-Ether-Ketone (Cfr-Peek) For Use In Overmolded Lattice Composite, Ryan C. Ogle

Masters Theses

Current orthopedic implants are overwhelmingly composed from metallic materials. These implants show superior mechanical properties, but this can additionally result in stress shielding due to a modulus mismatch between the bone tissue and implanted device. Polymeric implants reduce this stress shielding effect but have much lower mechanical properties, limiting their use. Polylactic acid (PLA) is a widely used biodegradable thermoplastic polymer, however, its use has been limited by the polymer’s mechanical properties and rapid loss of strength during degradation in vivo. Polyether-ether-ketone (PEEK) is another common biocompatible polymer , with chemical and mechanical properties which make it a popular alternative …

Direct Ink Writing Of Flexible Piezoelectric Sensors, Amanda M. White

Boise State University Theses and Dissertations

Piezoelectric poly(vinylidene fluoride-co-trifluoroethylene), or PVDF-trFE, builds up significant electrical charges on its surface when stressed. By correlating the mechanical force with the resulting electrical charges or voltages, researchers have developed flexible, broadband, and biocompatible force sensors. PVDF-trFE force sensors are traditionally fabricated via spin coating or solvent casting, which result in large waste production and experience difficulties in forming complex geometries. To tackle these challenges, I leveraged a commercial direct ink writing system (nScrypt microdispenser) to additively manufacture PVDF-trFE force sensors. I first synthesized an unprecedented piezoelectric ink that is compatible with a commercial ink writing system at Boise State …

Design, Evaluation, And Control Of Nexus: A Multiscale Additive Manufacturing Platform With Integrated 3d Printing And Robotic Assembly., Danming Wei

Electronic Theses and Dissertations

Additive manufacturing (AM) technology is an emerging approach to creating three-dimensional (3D) objects and has seen numerous applications in medical implants, transportation, aerospace, energy, consumer products, etc. Compared with manufacturing by forming and machining, additive manufacturing techniques provide more rapid, economical, efficient, reliable, and complex manufacturing processes. However, additive manufacturing also has limitations on print strength and dimensional tolerance, while traditional additive manufacturing hardware platforms for 3D printing have limited flexibility. In particular, part geometry and materials are limited to most 3D printing hardware. In addition, for multiscale and complex products, samples must be printed, fabricated, and transferred among different …