Engineering Commons^™

A Review On Biomass As A Substitute Energy Source: Polygeneration Influence And Hydrogen Rich Gas Formation Via Pyrolysis, Tawanda Matamba, Arash Tahmasebi, Jianglong Yu, Alireza Keshavarz, Hussein R. Abid, Stefan Iglauer

Research outputs 2022 to 2026

Hydrogen rich gas production and advantages of polygeneration during biomass conversation through pyrolysis were extensively reviewed in this paper. Different innovative pyrolysis setups and the effect of reaction conditions such as pressure, temperature, catalyst type, biomass type, and reactor type on the formation of hydrogen and other value-added chemicals has been exploited. High temperatures and pressures together with application of catalysts was reported to favour the enhancement of hydrogen by promoting secondary pyrolysis reactions and hence the production of H2 gas. Compared to one-stage pyrolysis systems, pyrolysis data from two-stage pyrolysis reaction systems reported improved production of hydrogen and value-added …

Experiments And Modelling Of Biomass Pulverisation In Swirling And Non-Swirling Bluff Body-Stabilised Turbulent Annular Flows, Syed Ehtisham Gillani, Yasir M. Al-Abdeli, Zhao F. Tian

Research outputs 2022 to 2026

Deeper insights into particle loading have practical significance in applications particularly when this affects fuel-oxidiser mixing and flame stabilisation, as occurs in pulverised fuel (biomass) combustion systems. The underlying particle flow and dispersion characteristics not only play a crucial role in controlling overall combustion performance but can also impact emissions. A fundamental understanding of particle flow dynamics and dispersion behaviour for raw pulverised biomass, under non-swirling and swirling conditions need further systematic investigation to better understand the interplay between swirling and non-swirling bluff-body stabilised recirculation zones and particles emitted from a centralised jet. This work uses Particle Image Velocimetry (PIV) …

Carbohydrates Generated Via Hot Water As Catalyst For Co2 Reduction Reaction, Yang Yang, Heng Zhong, Jiong Cheng, Yun Hang Hu, Richard Lee Smith Jr, Fangming Jin

Michigan Tech Publications, Part 2

Combining terrestrial biomass with submarine-type hydrothermal environments for CO2 reduction is a possible approach for realizing new energies while achieving sustainable circulation of carbon. Herein, carbohydrateenabled CO2 reduction based on NaHCO3 conversion to formate revealed that hydrothermal environments facilitated direct hydrogen transfer from carbohydrates (glucose, cellulose) to CO2/NaHCO3 with hot water (250–300 °C, 5–20 MPa) acting as homogeneous catalyst in absence of any conventional catalysts giving CO2/ NaHCO3 reduction efficiencies as high as 76% for cellulose. Time-resolved operando hydrothermal DRIFTS spectra of glycolaldehyde in hot water (250 °C, autogenous pressure) verified that water catalyzed NaHCO3 reduction by converting the -CHO …

Evaluation Of Biomass As Bio-Additive In 3d Printing, Shuyang Zhang

Doctoral Dissertations

The petrol-based polymer has been widely applied in current daily life. The end-of-life of polymeric products has drawn environmental concerns. One of the solutions to such issues is to use bio-renewable materials to replace or reduce the use of petrol-based materials. Lignocellulosic materials are one of the potential candidates. Along with the features of 3D printing and the unique properties of biomass, 3D-printed biomass-based materials could be promising in preparing sustainable alternatives.

In this dissertation, lignin and other biomass were applied to various 3D printing techniques for sustainable composites. Stereolithography (SLA) was first used, and the kraft softwood lignin was …

Improving Lignin Recovery From Paper Mill And Biorefinery Waste Streams Via Liquid-Phase Splitting, Carter Fitzgerald

All Dissertations

Lignin is an abundant biopolymer with significant promise due to its aromaticity. It has been targeted as a replacement for a number of petroleum-based products including adhesives, coatings, polyurethane foams, activated carbon, and carbon fibers. However, commercially available bulk lignins are too polydisperse, and contain too many residual metals from the pulping process that are detrimental to the properties of the final product.

The Sequential Liquid-lignin Recovery and Purification (SLRP) process was developed by Michael Lake and John Blackburn, in collaboration with Clemson, with the intention of creating a continuous method for recovering lignin from paper-mill black liquors. Thies and …

Hydrothermal Liquefaction (Htl) Of Lignocellulosic Biomass For Biocrude Production: Reaction Kinetics And Corrosion-Resistance Performance Of Candidate Alloys For Reactors, Haoyu Wang

Electronic Thesis and Dissertation Repository

In recent years, the rapid increase in the demand for clean energy and green chemicals as well as concerns over the supply and environmental impacts associated with fossil. resources have stimulated intensive research on conversion of bioresources, such as lignocellulosic biomass and biowaste, into energy, fuels, chemicals, and materials.

Hydrothermal liquefaction (HTL) is a unique thermochemical conversion process, particularly applicable for the conversion of wet biomass and biowaste feedstocks. Most of the biomass HTL studies are conducted in batch reactor and focus on the effects of catalysts, reaction temperature and time on production efficiency and chemical properties of the products. …

Synthesis Of A Pharmaceutical Precursor From Bioderived Glucose, Justin O. P. Waters

Electronic Theses and Dissertations

Medication costs in the U.S. are high, and manufacturing and production comprise the largest share of those costs. As the world continues to shift to more sustainable methods of production, there are opportunities to reduce these costs through green synthesis. A large number of pharmaceuticals are derived from a precursor (S-3-hydroxy-gamma-butyrolactone ‘HBL’). Drugs that treat cancer, antivirals, antibacterial drugs, and some cholesterol medications all can be derived from HBL. Currently, HBL is almost exclusively derived from petroleum through an expensive and resource intensive process. Until recently, ‘green’ efforts to derive HBL from biomass have been plagued with many of the …

Modeling The Production Of Microalgal Biomass In Large Water Resource Recovery Facilities And Its Processing Into Various Commodity Bioproducts, James Pierson, Gopi Raju Makkena, Sandeep Kumar, Vinod Kumar, Vivekanand Vivekanand, Hasan Husain, Muhammad Ayser, Venkatesh Balan

Civil & Environmental Engineering Faculty Publications

Algae are capable of sequestering nutrients such as nitrates and phosphates from wastewater in the presence of sunlight and carbon dioxide (CO₂) to build up their body mass and help combat climate change. In the current study, we carried out different case studies to estimate the volume of algal biomass that could be produced annually using the rotating algal biofilm (RAB) method in three large-scale water resource recovery facilities (WRRFs) in Texas: Fort Worth, Dallas, and Houston. We calculated the total amount of lipids, carbohydrates, and proteins that could be fractionated from the algal biomass while using the …

Partially Oxidative Torrefaction Of Woody Biomass Pellets: Burning Behaviour And Emission Analysis, Sajid Riaz, Yasir M. Al-Abdeli, Ibukun Oluwoye

Research outputs 2022 to 2026

Non-conventional torrefaction under partially oxidative conditions is an emerging cost-effective thermochemical pre-treatment method to improve the quality of biomass for energy applications. The literature lacks data on the combustion of biomass torrefied under oxygen-deficient atmosphere with actual reactor conditions (inevitable non-uniformities in the thermal environment). In this work, a dual mode fixed-bed biomass (torrefaction) reactor and combustor was operated on Australian biomass pellets, to torrefy the fuels at 275 °C for 30 min using partially oxidative atmosphere (O₂: 5 vol %, balance N₂) and then to combust them. Combustion behaviour with a particular focus on gaseous …

Reduced Metal Nanocatalysts For Selective Electrochemical Hydrogenation Of Biomass-Derived 5-(Hydroxymethyl)Furfural To 2, 5-Bis(Hydroxymethyl)Furan In Ambient Conditions, Baleeswaraiah Muchharla, Moumita Dikshit, Ujjwal Pokharel, Ravindranath Garimella, Adetayo Adedeji, Kapil Kumar, Wei Cao, Hani Elsayed-Ali, Kishor Kumar Sadasivuni, Naif Abdullah Al-Dhabi, Sandeep Kumar, Bijandra Kumar

Chemistry & Biochemistry Faculty Publications

Selective electrochemical hydrogenation (ECH) of biomass-derived unsaturated organic molecules has enormous potential for sustainable chemical production. However, an efficient catalyst is essential to perform an ECH reaction consisting of superior product selectivity and a higher conversion rate. Here, we examined the ECH performance of reduced metal nanostructures i.e., reduced Ag (rAg) and reduced copper (rCu) prepared via electrochemical or thermal oxidation and electrochemical reduction process, respectively. Surface morphological analysis suggests formation of nanocoral and entangled nanowire structure formation for rAg and rCu catalysts. rCu exhibits slight enhancement in ECH reaction performance in comparison to the pristine Cu. However, the rAg …