Engineering Commons^™

Multilayered Transmission Lines, Antennas And Phased Arrays With Structurally Integrated Control Electronics Using Additive Manufacturing, Merve Kacar

USF Tampa Graduate Theses and Dissertations

This dissertation presents high-performance transmission lines, antennas, and phased arrays with novel packaging techniques by harnessing design flexibilities of additive manufacturing (AM). AM enables realizing multilayered RF electronics with complex geometrical structures that are not practical using conventional fabrication methods. Design flexibilities offered by AM as customized dielectric shapes/thicknesses, dielectric properties, metallization on conformal surfaces, and structural packaging are harnessed for multilayered RF applications. Although several works demonstrated the viability of AM for antenna realizations, its capability for addressing the needs of wideband, high radiation efficiency antenna systems packaged with active RF circuit components remains relatively unexplored. The first major …

Fabrication And Flow Dynamics Analysis Of Micromixer For Lab-On-A-Chip Devices, Md Fazlay Rubby

Theses and Dissertations

The miniaturized systems designed for lab-on-a-chip (LOC) technologies are generally implemented with a micro-scale mixer to provide intimate contact between the reagent molecules for interactions and chemical reactions. The exponential increase of research in microfabrication and microfluidic applications highlights the importance of understanding the theory and mechanism that governs mixing at the microscale level. In this study, the fabrication of an active and passive micromixer was discussed. The optimized state of art soft lithography and 3D printing was used as a microfabrication technique. The challenges at different fabrication steps were presented along with the modifications. Microelectrodes were integrated with the …

Towards Distributed Recycling With Additive Manufacturing Of Pet Flake Feedstocks, Helen A. Little, Nagendra Gautam Tanikella, Matthew J. Reich, Matthew J. Fiedler, Samantha L. Snabes, Joshua M. Pearce

Michigan Tech Publications

This study explores the potential to reach a circular economy for post-consumer Recycled Polyethylene Terephthalate (rPET) packaging and bottles by using it as a Distributed Recycling for Additive Manufacturing (DRAM) feedstock. Specifically, for the first time, rPET water bottle flake is processed using only an open source toolchain with Fused Particle Fabrication (FPF) or Fused Granular Fabrication (FGF) processing rather than first converting it to filament. In this study, first the impact of granulation, sifting, and heating (and their sequential combination) is quantified on the shape and size distribution of the rPET flakes. Then 3D printing tests were performed on …

Additively Manufactured Parametric Universal Clip-System: An Open Source Approach For Aiding Personal Exposure Easurement In The Breathing Zone, Kirsi Kukko, Jan Sher Akmal, Anneli Kangas, Mika Salmi, Roy Björkstrand, Anna-Kaisa Viitanen, Jouni Partanen, Joshua M. Pearce

Michigan Tech Publications

Design for additive manufacturing is adopted to help solve problems inherent to attaching active personal sampler systems to workers for monitoring their breathing zone. A novel and parametric 3D printable clip system was designed with an open source Computer-aided design (CAD) system and was additively manufactured. The concept was first tested with a simple clip design, and when it was found to be functional, the ability of the innovative and open source design to be extended to other applications was demonstrated by designing another tooling system. The clip system was tested for mechanical stress test to establish a minimum lifetime …

Engineering And Technology For The Better Good Of Society, Pit-Oer, Huixin Wu, Raymond Lam, Dimitrios Stroumbakis

Open Educational Resources

Understanding the importance of New America's commitment to strengthening the outcomes of non-profits and the public sector. We at QCC's Engineering Technology (ET) Department are dedicated to contributing to the nationwide efforts underway by Universities to establish Public-Interest-in-Technology curriculums. Technology impacts our every day lives like never before and it is time to augment the technologists' and engineers' education with curriculum components to enhance their ability to serve the good of society by:

• Teaching students to leverage 3D printing, Open Source Coding, Project Management and Engineering Ethics for the good of society.
• Exposing ET students to put into practice the …

Plastic Recycling In Additive Manufacturing: A Systematic Literature Review And Opportunities For The Circular Economy, Fabio A. Cruz Sanchez, Hakim Boudaoud, Mauricio Camargo, Joshua M. Pearce

Michigan Tech Publications

The rapid technical evolution of additive manufacturing (AM) enables a new path to a circular economy using distributed recycling and production. This concept of Distributed Recycling via Additive Manufacturing (DRAM) is related to the use of recycled materials by means of mechanical recycling process in the 3D printing process chain. This paper aims to examine the current advances on thermoplastic recycling processes via additive manufacturing technologies. After proposing a closed recycling global chain for DRAM, a systematic literature review including 92 papers from 2009 to 2019 was performed using the scopus, web of science and springer databases. This work examines …

Spectral 3d Reconstruction Based On Macroscopic Oct Imaging, Xingyu Zhou

Theses

Various optical technologies have been utilized to improve art conservation by art conservators, such as laser triangulation, stereophotogrammetry, structured light, laser scanner and time of flight sensors. These methods have been deployed to capture the 3D or surface topography information of sculptures and architectures. Optical coherence tomography (OCT) has introduced new imaging methods to study the surface features and subsurface structures of delicate cultural heritage objects. However, despite its higher spatial resolution, the field of view (FOV) of OCT severely limits the size of the scanning area and does not allow macroscopic examination. To solve this issue, we develop and …

Enabling 3d Printing Technologies For Artificial Compound Eye System And Penetrating Neural Probes, Boshen Zhang

Wayne State University Dissertations

3D printing has become a useful and transformative method and has applications in many different fields, including organ printing, aerospace applications, and medical devices. With higher resolution, faster production speed, and more design flexibility, 3D printing technologies can lead to more novel devices and systems. In this research, two new techniques have been developed to enable 3D printing technologies for artificial compound eye system and penetrating glassy carbon neural electrode array.

This work focuses on developing new applications based on the SLA 3D printing process, which uses the liquid resin to create a solid 3D structure. The limitation of SLA …

Titanium Nitride Nanotube Electrodes Used In Neural Signal Recording Application And Neurotransmitter Detection, Gui Chen

Wayne State University Dissertations

Electrode probes are devices widely used for stimulating and recording neural cell signals in the neuroscience field, which can convert the ion potential generated by electrochemical activities into an electronic potential that can be measured by the external instrument systems. A stable neural interface that effectively communicates with the nervous system via electrode is much important for the robust recording and the long-term monitoring of the activity of the neural signals. These probes are designed to minimize tissue damage for superior signal quality. Each probe’s mechanical, geometric, and electrical characteristics are precise and highly reproducible for consistent, high-quality results. There …

A Fabrication-Oriented Remeshing Method For Auxetic Pattern Extraction, Levend Mehmet Mert, Ulaş Yaman, Yusuf Sahi̇lli̇oğlu

Turkish Journal of Electrical Engineering and Computer Sciences

We propose a method for extracting auxetic patterns from meshes for fabrication by modifying the existing mesh primitives directly and fully automatically. This direct approach is novel in the sense that most of the fabricationoriented surface tiling methods introduce additional primitives, such as curve networks in an interactive semiautomatic framework. Our method is based on a remeshing procedure that converts a given quad mesh with arbitrary topology into our desired structure that is ready to be fabricated. The main advantages of establishing auxetic patterns on meshes are the achieved flexibility using cheap inflexible materials as well as less material usage …