Engineering Commons^™

High-Pressure Studies On The Transition From Red Phosphorus To Black Phosphorus, Heng Xiang

Electronic Thesis and Dissertation Repository

Black phosphorus (BP) is a promising material in many research fields. However, the transition process from amorphous red phosphorus (ARP) is elusive and hence hinders large scale synthesis and applications. This work describes the application of the high-pressure method to study the transition process from ARP to BP.

In this thesis, the following three objectives were achieved: (1) to understand the mechanism of the transition, (2) to facilitate the synthesis of BP by taking the advantage of less pure ARP, (3) to propose new methods of synthesizing BP-based materials, such as the moderately oxidized BP and the black phosphorus/ amorphous …

Design Of Efficient Carbon-Based Adsorbents For The Removal Of Organic And Inorganic Water Contaminants, Sayedeh Soroosh Mortazavian Dehkordi

UNLV Theses, Dissertations, Professional Papers, and Capstones

Granular activated carbon (AC) and biochar (BC) are two carbon-based adsorbents commonly used for water and wastewater treatment. However, these adsorbents have drawbacks that suppress their aqueous contaminants removal efficiency. Their major disadvantages are that AC has low selectivity and reusability potential, and BC has a hydrophobic nature.

The scope of this dissertation is to enhance the performance of commonly-used carbon-based adsorbents for the removal of organic and inorganic water contaminants and to understand the interactive mechanism of contaminants’ ions/molecules with adsorbents. Hexavalent chromium (Cr(VI)) and trichloroethylene (TCE) are two types of inorganic and organic water contaminants, respectively, which are …

Pressure Driven Electronic Band Gap Engineering In Tin(Iv)-O,N Compounds, Daniel Thomas Sneed

UNLV Theses, Dissertations, Professional Papers, and Capstones

The intrinsic link between long-range order, coordination geometry, and the electronic properties of a system must be understood in order to tailor function-specific materials. Although material properties are typically tailored using chemical dopants, such methods can cause irreversible changes to the structure, limiting the range of functionality. The application of high pressure may provide an alternative “clean” method to tune the electronic properties of semiconducting materials by tailoring their defect density and structure.

We have explored a number of optoelectronic relevant materials with promising characteristics, specifically Sn-(O,N) compounds which have been predicted to undergo pressure-mediated opening of their optical band …

Molecular Dynamics Studies Of Thin-Film Evaporation: The Effect Of Graphene-Coated Silicon On Water Evaporation Behavior, Rui Zhou

McKelvey School of Engineering Theses & Dissertations

Conventional single-phase air or liquid cooling methods are insufficient to dissipate the high heat flux of next-generation electronic systems. Thin-film evaporation is one of the most promising solutions, because it takes advantage of the large amount of latent heat in the phase change process. It is important to understand the relationship between interfacial thermal resistance, surface wettability, and thin-film evaporation behavior. In this study, non-equilibrium molecular dynamics simulations are used to study mass and heat transfer in thin-film evaporation of water on a silicon substrate, and equilibrium molecular dynamics simulations are used to study the surface wettability by measuring contact …

Retrofit Of Corroded Corrugated Metal Culverts Using Gfrp Slip-Liner, Rahulreddy Chennareddy

Civil Engineering ETDs

Culverts are water conveyance structures, typically used to allow water flow and maintain a balance between the flow streams without interrupting structures such as highways and bridges. Corrugated metal pipes (CMPs) have been used as culverts in North America since the 1950s because of their low cost and simple construction method. Today, the corrosion of CMPs is a major problem faced by all U.S. Departments of Transportation. There is an urgent need to provide an efficient solution, one that is corrosion-resistant, to retrofit thousands of corroded CMPs across the country. High specific strength, high strength to weight ratio, corrosion resistance, …

Ph-Sensitive Oxygen Release Microspheres To Enhance Cell Survival In Ischemic Condition, Zhongting Liu

McKelvey School of Engineering Theses & Dissertations

Ischemic diseases such as myocardial infarction, stroke and limb ischemia are severe cardiovascular diseases with high rate of death and millions of people suffered from these diseases. Under ischemic environment, cells die due to deficient supply of nutrient and oxygen. To regenerate ischemic tissues, stem cell therapy is a promising approach because stem cells can differentiate into cells necessary for the regeneration. However, stem cell therapy has limitations. For example, few cells can survive under harsh ischemic environment. To enhance stem cells survival, implantation of oxygen release microspheres to sustained supply cells with oxygen represents an effective strategy. Previously, our …

Expanding The Palette: Synthesizing Microencapsulated Organic Phase Change Materials In Metallic Matrices For Transient Thermal Applications, Melissa Kate Mccann

McKelvey School of Engineering Theses & Dissertations

As the demand for smaller and faster electronics increases, it becomes increasingly challenging to effectively manage the generated heat without hindering device performance in applications whose thermal profiles are dominated by pulsed thermal loads. Heat propagation in a system can be characterized by steady or transient state heat transfer. In steady state, the temperature at any particular point remains constant after thermal equilibrium is reached. In a transient state, the temperature within a system varies over time. The changing parameters and time dependency associated with a transient regime make heat transfer calculations far more complex than in a steady state. …

The Optimized Synthesis Of Copper Nanowire For High-Quality And Fabrication Of Core-Shell Nanowire, Suhyun Lee

Dissertations and Theses

Flexible electronics are the promising technology for prospective application in foldable phones. Currently, indium tin oxide (ITO) has been widely used for electronic devices including flat-panel display. However, it is brittle and expensive. Metal nanowires are considered as alternative materials. Among various metal nanowires, copper nanowires are attractive because of its high electrical conductivity, better flexibility, and low cost compared with ITO. However, copper nanowires are very prone to oxidize, which causes subsequent degradation of electrical conductivity. Due to this oxidation issue, core-shell structure nanowires, which are formed silver shell having high conductivity and low resistivity on the surfaces of …

Characterization And Computational Modelling For The Garnet Oxide Solid State Electrolyte Ta-Llzo, Colin A. Versnick

Electronic Thesis and Dissertation Repository

The all-solid-state-battery (ASSB) serves as a promising candidate for next generation lithium ion batteries for significant improvements in battery safety, capacity, and longevity. Of the material candidates researched to replace the conventionally used liquid electrolyte, the garnet oxide Ta-LLZO (Li_6.4La₃Zr_1.4Ta_0.6O₁₂) has received much attention thanks to its high chemical and electrochemical stability, and ionic conductivity which rivals that of liquid electrolytes. While much investigation has taken place regarding the electrochemical performance of Ta-LLZO, much less is known about the micromechanics, including microstructural characterization, stress and strain development, and material failure …

Elucidation Of The Factors Affecting The Production And Properties Of Novel Wood Composites Made Using Renewable Nanomaterials As A Binder, Ezatollah Amini

Electronic Theses and Dissertations

A novel application of cellulose nanofibrils (CNF) as a binding agent is proposed. In this work the utilization of CNF as a complete replacement for the conventional resin-adhesives in the formulation of particleboard (PB) was evaluated. PB panels with varying CNF contents and target densities were produced using a two-step (i.e. cold and hot) pressing process. For initial evaluation, the mechanical and physical properties of the manufactured panels were determined. The need to remove a considerable amount of water from the wood particle (WP)-CNF mixture during cold pressing, motivated the study of the furnish dewatering behavior. Dewatering was assessed through …

Application Of Survival Analysis Techniques To Probabilistic Assessment Of Fatigue In Steel Bridges, Azam Nabizadehdarabi

Theses and Dissertations

The fatigue of engineering materials under repetitive loading is a significant issue affecting the design and durability of components and systems in a variety of engineering-related applications including civil, mechanical, aerospace, automotive, and electronics. Many factors can affect the service life of a component or system under repetitive loading, such as the type of structure, loading, connection details, stress state, peak stress or stress range, surface condition, temperature, and environmental exposure. Currently, there is no comprehensive probabilistic approach that can systematically address all the factors that contribute to fatigue on a single mathematical platform. However, advanced analysis techniques developed for …

Nanoscale Optical And Correlative Microscopies For Quantitative Characterization Of Dna Nanostructures, Christopher Michael Green

Boise State University Theses and Dissertations

Methods to engineer nanomaterials and devices with uniquely tailored properties are highly sought after in fields such as manufacturing, medicine, energy, and the environment. The macromolecule deoxyribonucleic acid (DNA) enables programmable self-assembly of nanostructures with near arbitrary shape and size and with unprecedented precision and accuracy. Additionally, DNA can be chemically modified to attach molecules and nanoparticles, providing a means to organize active materials into devices with unique or enhanced properties. One particularly powerful form of DNA-based self-assembly, DNA origami, provides robust structures with the potential for nanometer-scale resolution of addressable sites. DNA origami are assembled from one large DNA …

Mandela Splash Pad Pre-Construction Plan, Levi Sandbulte

Theses/Capstones/Creative Projects

In the construction industry, it is the responsibility of the general contractor to take the architect’s ideas and turn it into a real building. Many times this requires ample communication and several drafts. This efficient execution of this process is vital to the completion of a successful project. In this project, I practice this communication process. The challenge presented by the owner is to build an affordable splash pad, and without impacting the construction schedule of the Early Childhood Development Center (ECDC) that is being built on the same property at the same time. This proposal gives the owner a …

Surface Alloying Of Mild Steel During Casting Process: Microstructural Evolution, Phase Development And Heat Treatment, Kaustubh Kishore Rane

Theses and Dissertations

Casting is one of the oldest manufacturing processes in practice and the growth of casting industry through the ages has led to scientific leaps in the field of metallurgy. As we look into the history of metal castings, it is prominent that a steady growth in the knowledge leading to rise of newer casting techniques has caused an exponential increase in the way we can use metal castings to improve our lives. The surface alloying of mild steel to compositions targeted towards stainless steel compositions was performed in this study by sand casting process. Sand casting is one of the …

Damage Resistance And Tolerance Of 3d Woven Composites, Justin T. Mcdermott

Electronic Theses and Dissertations

Composite materials have been adopted into primary aircraft structures by virtue of their great strength-to-weight and stiffness-to-weight ratios, fatigue insensitivity, and corrosion resistance. These characteristics are leveraged by aircraft designers to deliver improved fuel effciency and reduced scheduled maintenance burdens for their customers. These benefits have been impressively realized in the Boeing 787 and Airbus A350 XWB, with airframes utilizing about 50% composites by weight. Tempering these successes, however, are the inherent vulnerabilities of carbon-fiber reinforced composites. When compared to conventional metallic structure, composite laminates are more sensitive to stress concentrations at mechanical fastenings and damage due to low-velocity impact. …

Ultrasonic Wave Propagation In Copper/Graphene Metal Matrix Composites, Casey Lindbloom

Mechanical Engineering Undergraduate Honors Theses

Emerging metallic composite materials implanted with graphene sheets are showing immense promise, with benefits being observed with regards to mechanical, thermal, and electrical material properties. This research aims to investigate the effects on ultrasonic wave propagation in Copper/Graphene Metal Matrix Composites (Cu/Gr MMCs) with varying graphene arrangements inspired from nacre and bone nanoscale material distributions. To accomplish this, the molecular dynamics (MD) method is utilized to simulate nanoscale wave propagation on a set of Cu/Gr MMCs with differing graphene arrangements and volume percentages ranging up to 4.56%. The computational model results are then analyzed to determine the variation in energy …

Studies Of Initial Growth Of Gan On Inn, Alaa Alnami

Graduate Theses and Dissertations

III-nitride materials have recently attracted much attention for applications in both the microelectronics and optoelectronics. For optoelectronic devices, III-nitride materials with tunable energy band gaps can be used as the active region of devices to enhance the absorption or emission. A such material is indium nitride (InN), which along with gallium nitride (GaN) and aluminum nitride (AlN) embody the very real promise of forming the basis of a broad spectrum, a high efficiency solar cell. One of the remaining complications in incorporating InN into a solar cell design is the effects of the high temperature growth of the GaN crystal …

Graphene/Polypropylene Nanocomposites, Carmen Karam Abuoudah

Theses

Graphene has been regarded as a multifunctional nanofiller for manufacturing polymer nanocomposites. A small amount of graphene nanosheets is expected to significantly improve the properties of base polymers. The property enhancement, however, is a function of the degree of exfoliation and dispersion of graphene as well as its compatibility with the polymer. The non-polar nature of polyolefins such as polyethylene (PE) and polypropylene (PP) restricts the homogeneous dispersion of graphene, leading to significant agglomeration of the nanosheets and thus, limiting the expected property improvements in polyolefins. Currently, more efforts are focused on finding strategies to improve graphene dispersion in polyolefins. …

Effects Of Magnetic Domain And Twin Boundary Interactions On Magneto-Mechanical Properties Of Magnetic Shape Memory Alloys, Medha Veligatla

Boise State University Theses and Dissertations

Magnetic shape memory (MSM) alloys deform substantially when exposed to a magnetic field. This recoverable plastic deformation occurs through crystallographic twinning. Thereby the internal magnetic domain structure modulates the deformation mechanisms through the interaction of magnetic domains with twin boundaries. We study the meso scale magneto-structural interactions that affect the macroscopic material properties of MSM alloys. The study at the meso length scale is most effective as it allows for resolving interactions at magnetic domain wall width resolution with reasonable computing cost. We apply micromagnetics simulations to evaluate the evolution of magnetic domains, their interaction with twin boundaries, the distribution …

Study Of Amorphous Boron Carbide And Hydrogenated Boron Carbide Materials Using Molecular Dynamics And Hybrid Reverse Monte Carlo, Rajan Khadka

MSU Graduate Theses

We present a computational study of amorphous boron carbide (a-B_xC) models using Molecular Dynamics (MD) studied with Stillinger-Weber (SW) and ReaxFF potential. The atomic structure factor (S(Q)), radial distribution function (RDF) and bond lengths comparison with other experimental and ab initio models shows that a random arrangement of icosahedra (B₁₂, B₁₁C) interconnected by chains (CCC, CBC) are present in a-B_xC. Afterward, Hybrid Reverse Monte Carlo (HRMC) technique is used to recreate a-B_xC structures. The existing SW potential parameters of Boron are optimized for the α-rhombohedral (Icosahedral B_{12 …}

Towards Completely Automated Glycan Synthesis, Matteo Panza

Dissertations

Carbohydrates are ubiquitous both in nature as biologically active compounds and in medicine as pharmaceuticals. Although there has been continued interest in the synthesis of carbohydrates, chemical methods require specialized knowledge and hence remain cumbersome. The need for development of rapid, efficient and operationally simple procedures has come to the fore. This dissertation focuses on the development of a fully automated platform that will enable both experts and non-specialists to perform the synthesis of glycans. Existing automated methods for the synthesis of oligosaccharides are highly sophisticated, operationally complex, and require significant user know-how. By contrast, high performance liquid chromatography (HPLC) …

Additively Manufactured Continuous Carbon Fiber Thermoplastic Composites For High-Performance Applications, Nekoda Van De Werken

Mechanical Engineering ETDs

The goal of this dissertation is to provide a foundation for the advancement of additive manufacturing (AM) toward production of high-performance carbon fiber reinforced polymer matrix composites (CFRPs). AM can provide valuable advantages over conventional composite manufacturing techniques, including the control over fiber orientation, capability of manufacturing complex geometries, out-of-autoclave processing, elimination of the need for composite tooling, and the ability to perform lights-out manufacturing. Currently, however, a suite of challenges related to modelling, design, manufacturing defects, and general limitations in the current understanding of the processing-structure-property relationships exist in AM of composites. To this end, this dissertation investigates novel …

Molecular Dynamics Simulations Of Interaction Of Dna Nucleotides And Lignin Oligomers With Small Molecules And Interfaces, Xinjie Tong

LSU Doctoral Dissertations

Molecular dynamics (MD) simulations of interaction of DNA nucleotides with self-assembled monolayers (SAMs) provide valuable information that is critical to the development of a new DNA sequencing technique. We investigated the interactions and transport characteristics of mononucleotides moving through nanoslits with SAMs-covered surfaces. Our simulations focused on nanoslits in which the walls were composed of three different types of SAMs: methylformyl terminated, methyl terminated, and phenoxy terminated. The results demonstrated that the phenoxy terminated surfaces have the shortest required nanoslits length for nucleotides separation.

Using MD simulations, we also investigated the interaction of mono-lignin and oligo-lignols with lipid bilayers and …

First-Principles Simulations Of Materials Under Extreme Conditions, Kien Nguyen Cong

USF Tampa Graduate Theses and Dissertations

The investigation of materials at extreme conditions of high pressure and temperature (high-PT), has been one of the greatest scientific endeavors in condensed mater physics, chemistry, astronomy, planetary, and material sciences. Being subjected to high-PT conditions, materials exhibit dramatic changes in both atomic and electronic structure resulting in an emergence of exceptionally interesting phenomena including structural and electronic phase transitions, chemical reactions, and formation of novel compounds with never-previously observed physical and chemical properties. Although new exciting experimental developments in static and dynamic compression combined with new diagnostics/characterization methods allow to uncover new processes and phenomena at high P-T conditions, …

Micromechanics Of Plasticity Of Zr-2.5%Nb Alloy, Md Imran Khan

Electronic Thesis and Dissertation Repository

Zirconium alloys are used in many thermal neutron fission reactors because of their very low neutron interaction cross-sections along with their excellent mechanical strength and corrosion resistance. Numerous experiments have been conducted on these alloys at the bulk scale to determine their mechanical properties. Recent advancements in micro-mechanical testing make it easier to study site-specific mechanical properties for micron or submicron-sized samples. Understanding the mechanical response of such small volumes of material is extremely important for developing accurate models to predict the ductile fracture toughness of these in-reactor materials. Pressure tubes made of Zr-2.5%Nb alloys are an integral part of …

Combined Molecular Dynamics And Phase Field Simulation Of Crystal Melt Interfacial Properties And Microstructure Evolution During Rapid Solidification Of Ti-Ni Alloys, Sepideh Kavousi

LSU Doctoral Dissertations

Phase field method has become a popular tool to investigate the microstructure evolution during the solidification. Quantitative predictions using this method is still limited, and in this dissertation, we try to study this problem from different perspectives.

Most of the phase field models consider the solid-liquid interface to be in local equilibrium. Solidification during some manufacturing processes like selective laser melting, and electron beam additive manufacturing is rapid and far from equilibrium which can result in supersaturated solid solutions, segregation-free crystals, or metastable phases. Before obtaining any conclusions from the phase field simulations, we must know the answer for “which …

An Investigation Of High-Speed Consolidation And Repair Of Carbon Fiber - Epoxy Composites Through Ultrasonic Welding, David A. Hoskins

LSU Master's Theses

Adhesive repair of carbon fiber composite structures is commonly done on damaged structures to extend the service life. This method requires careful preparation of the damaged surface with intricate steps to ensure good bonding between the repair patch and the parent structure by means of an adhesive film. As with many forms of composite manufacturing, it is required to perform vacuum bagging, debulking, and a heated cure depending on the resin. All these steps make the repair process costly and time consuming.

In this present work, an alternative method of repair is investigated which explores the experimental feasibility of using …

Synthesis Of Vo2/Poly(Mma-Co-Dmemuabr) Antimicrobial/Thermochromic Dual-Functional Coating And Reactivity Ratios Study, Yixian Liu

Electronic Thesis and Dissertation Repository

Antimicrobial/thermochromic dual-functional coatings were successfully synthesized via UV-curing. The quaternary ammonium compound (QAC) N,N-dimethyl-N-{2-[(2-methylprop-2-enoyl)oxy]ethyl}undecane-1-aminium bromide (dMEMUABr) was synthesized and copolymerized with methyl methacrylate (MMA) for antimicrobial properties. Vanadium oxide (VO₂) nanoparticles were evenly dispersed within the coating, providing thermochromic properties. The dual-functional coating showed high luminous transmittance (T_lum(25°C) =36.1 %) and solar energy modulation ( T_sol=5.8 %). 90.3 % of bacteria reduction was observed against Escherichia coli within 24 h contact. To further understand the sequence distribution of the copolymer poly(MMA-co-dMEMUABr), the reactivity ratios of MMA and dMEMUABr monomer were studied and compared under thermal …

Sorption Of Benzene, Toluene, Ethylbenzene And Different Ratios Of Mixture Solvent By Plasticized Pema Films Using A Qcm Sensor, Xinpeng Li

USF Tampa Graduate Theses and Dissertations

VOCs (volatile organic compounds) can cause great harm to human health especially benzene, toluene and ethylbenzene. In this work a Quartz Crystal Microbalance (QCM) sensor with a polymer/plasticizer film was developed to quantify the VOCs both in air and water. QCM is an acoustic wave sensor that can be used well in detecting the aromatic compounds in the film. Because more than one VOC is present in the air, this thesis focuses on finding the sorption of different ratios of VOCs (benzene, toluene, ethylbenzene) using a polymer/plasticizer film in QCM. Poly (ethyl methacrylate) (PEMA) was used as the polymer because …

Extrusion Of Perovskite Oxide/ Silica Composites For Thermochemical Carbon Dioxide Conversion, Qian Li

USF Tampa Graduate Theses and Dissertations

In order to solve the increasing greenhouse effect problem, perovskite-type oxides have been used to convert CO2 to CO in a reverse water-gas shift chemical looping (RWGS-CL) process. Currently, the process is at the micro-reactor scale and used catalyst in powder form. However, formed materials are needed if the scale is to be increased.

Our research focus is on increasing the conversion yield of perovskite oxides with SiO2 support and scaling up the powder form perovskite-type oxides to pellet by extrusion. The binder added during the extrusion process must be removed to avoid affecting the performance of the catalyst and …