Engineering Commons^™

Biomass-Derived Activated Carbons For Electrical Double Layer Supercapacitors: Performance And Stress Effect, Wenxin Cao

Theses and Dissertations--Chemical and Materials Engineering

The vigorous development of human civilization has significantly increased the energy consumption in recent years. There is a great need to use renewable energy sources to substitute the depleting traditional fossil fuels, such as crude oil, natural gas and coal. The development of low-cost and high-performance energy storage devices (ESDs) and systems have drawn great attention due to their feasibility as backup power supply and their applications in portable electronics and electric vehicles. Supercapacitors are among the most important ESDs because of their long charging-discharging cycle life, high power capability and a large operating temperature range. In this thesis, high-performance …

Mechanical Properties And Degradation Of High Capacity Battery Electrodes: Fundamental Understanding And Coping Strategies, Yikai Wang

Theses and Dissertations--Chemical and Materials Engineering

Rechargeable lithium ion and lithium (Li) metal batteries with high energy density and stability are in high demand for the development of electric vehicles and smart grids. Intensive efforts have been devoted to developing high capacity battery electrodes. However, the known high capacity electrode materials experience fast capacity fading and have limited cycle life due to electromechanical degradations, such as fracture of Si-based electrodes and dendrite growth in Li metal electrodes. A fundamental understanding of electromechanical degradation mechanisms of high capacity electrodes will provide insights into strategies for improving their electrochemical performance. Thus, this dissertation focuses on mechanical properties, microstructure …

The Study Of Scandate Cathode And Its Characterization Under Various Stages Of Processing, Xiaomeng Zhang

Theses and Dissertations--Chemical and Materials Engineering

Scandate cathode under various processing stages: scandia nano-powder, tungsten scandia mix powder, sintered and impregnated pellets, were characterized with techniques that included electron microscopy, EDS, XPS, and work function measurements. The size and shape uniformity of nano-scale scandia particles changed from round to square and polyhedron during heat treatment. Reduction in size and improvement in size uniformity as heat treating temperature increased were observed. When determining the highest Sc coverage, three assessment methods were used and with their combined results, it was concluded that set VII had the highest Sc at%. In the sintered pellets, it was observed with SEM …

Investigation Of Transition-Metal Ions In The Nickel-Rich Layered Positive Electrode Materials For Lithium-Ion Batteries, Shuang Gao

Theses and Dissertations--Chemical and Materials Engineering

Layered lithium transition-metal oxides (LMOs) are used as the positive electrode material in rechargeable lithium-ion batteries. Because transition metals undergo redox reactions when lithium ions intercalate in and disintercalate from the lattice, the selection and composition of transition metals largely influence the electrochemical performance of LMOs. Recently, a Ni-rich compound, LiNi_0.8Co_0.1Mn_0.1O₂ (NCM811), has drawn much attention. It is expected to replace its state-of-the-art cousins, LiCoO₂ (LCO) and LiNi_1/3Co_1/3Mn_1/3O₂ (NCM111), because of its higher capacity, lower cost, and reduced toxicity. However, the excess Ni, as a …

Understanding The Structure-Property-Performance Relationship Of Silicon Negative Electrodes, Jiazhi Hu

Theses and Dissertations--Chemical and Materials Engineering

Rechargeable lithium ion batteries (LIBs) have long been used to power not only portable devices, e.g., mobile phones and laptops, but also large scale systems, e.g., electrical grid and electric vehicles. To meet the ever increasing demand for renewable energy storage, tremendous efforts have been devoted to improving the energy/power density of LIBs. Known for its high theoretical capacity (4200 mAh/g), silicon has been considered as one of the most promising negative electrode materials for high-energy-density LIBs. However, diffusion-induced stresses can cause fracture and, consequently, rapid degradation in the electrochemical performance of Si-based negative electrodes. To mitigate the detrimental effects …

Synthesis, Design, And Evaluation Of The Fluorescent Detection Of Polychlorinated Biphenyls(Pcbs) In Aqueous System, Irfan Ahmad

Theses and Dissertations--Chemical and Materials Engineering

The exposure to halogenated persistent organic pollutants (POPs), such as polychlorinated biphenyls (PCBs), has been linked to numerous inflammatory diseases, including diabetes, cancer and lowered immune response. PCBs have low solubility in water, and they interact with other contaminants, making their detection quite challenging. While, there have been several attempts at improving the ease of detection and sensing of PCBs, gas chromatography-mass spectrometry (GC-MS) remains the gold standard. However, despite its ubiquitous use, GC-MS is a challenging technique that requires high skill and careful sample preparation, which are time-consuming and costly. As such, there is still a need to develop …

Nanoharvesting And Delivery Of Bioactive Materials Using Engineered Silica Nanoparticles, Md Arif Khan

Theses and Dissertations--Chemical and Materials Engineering

Mesoporous silica nanoparticles (MSNPs) possess large surface areas and ample pore space that can be readily modified with specific functional groups for targeted binding of bioactive materials to be transported through cellular barriers. Engineered silica nanoparticles (ESNP) have been used extensively to deliver bio-active materials to target intracellular sites, including as non-viral vectors for nucleic acid (DNA/RNA) delivery such as for siRNA induced interference. The reverse process guided by the same principles is called “nanoharvesting”, where valuable biomolecules are carried out and separated from living and functioning organisms using nano-carriers. This dissertation focuses on ESNP design principles for both applications. …

Characterization Of Nanostructure, Materials, And Electron Emission Performance Of Next-Generation Thermionic Scandate Cathodes, Xiaotao Liu

Theses and Dissertations--Chemical and Materials Engineering

Scandate cathodes, where scandia is added to the tungsten cathode pellets, have recently received substantial and renewed research interest owing to significantly improved electron emission capabilities at lower temperatures, as compared with conventional dispenser cathodes. However, there are several persistent issues including non-uniform electron emission, lack of understanding regarding scandium’s role in the emission mechanism, and unreliable reproducibility in terms of scandate cathode fabrication. As a result, scandate cathodes have not yet been widely implemented in actual vacuum electron devices (VEDs).

The surface structure and chemical composition of multiple scandate cathodes – prepared with the powder using the liquid-solid (L-S) …

The Fabrication And Characterization Of Metal Oxide Nanoparticles Employed In Environmental Toxicity And Polymeric Nanocomposite Applications, Matthew Logan Hancock

Theses and Dissertations--Chemical and Materials Engineering

Ceria (cerium oxide) nanomaterials, or nanoceria, have commercial catalysis and energy storage applications. The cerium atoms on the surface of nanoceria can store or release oxygen, cycling between Ce³⁺ and Ce⁴⁺, and can therefore act as a therapeutic to relieve oxidative stress within living systems. Nanoceria dissolution is present in acidic environments in vivo. In order to accurately define the fate of nanoceria in vivo, nanoceria dissolution or stabilization is observed in vitro using acidic aqueous environments.

Nanoceria stabilization is a known problem even during its synthesis; in fact, a carboxylic acid, citric acid, is …