Engineering Commons^™

"Whole-Brained" Engineering Education In Undergraduate Studies At The University Of Dayton, Kylie Moellering

Undergraduate Voices

This inquiry is a case study which explores, explicates, and summarizes the recent shift to “whole-brained” engineering education for undergraduate-level students at the University of Dayton. This case study is primarily structured around the experiences and insights of an interviewee, Dr. Ken Bloemer, who is the Director of the Visioneering Center at the University of Dayton. The Visioneering Center is principally focused on promoting the progress of engineering education at the university. Voices from scholarly literature pertaining to this vision and other undergraduate engineering curricula are then used to reinforce the interviewee’s views and give deeper insight into the various …

Reevaluating The Professionalization Of Engineering Faculty | College Of Engineering, Usu College Of Engineering

College of Engineering News

An engineering education expert is encouraging institutions of higher education to reevaluate the professional experience of engineering faculty, specifically women professors.

Effect Of Cement Content On Concrete Performance, Caleb Joshua Lebow

Graduate Theses and Dissertations

Of all the traditional concrete materials, portland cement has the greatest impact on mixture cost and the environment. Cement is in many ways the glue holding concrete together (Weiss, 1999), and as such, it plays a major role in fresh and hardened concrete properties. Without the proper range of cement in the mixture, low strength development or excessive shrinkage may occur leading to premature deterioration. The Arkansas Department of Transportation (ARDOT) recognizes two types of concrete for use in bridge construction, Class S and Class S(AE). This paper focuses on the findings from testing of Class S(AE) concrete, short for …

Developing Computer Codes For Analyzing Bridge Response Due To Wim Data Truck Loading, Kenneth Patrick Pasley

Graduate Theses and Dissertations

Despite actual truck demographics evolving over the past 30 years, the Arkansas legal loads for bridge posting have not been updated. Custom computer codes were developed.to facilitate comparison between the current Arkansas legal loads for bridge posting and the actual Arkansas truck traffic to ensure that actual reactions are enveloped by the state'. The program, WIMFluence, calculates shear and moment influence lines for a bridge and the resulting shear and moment reactions based on weigh-in-motion data. With supporting scripts, the reactions due to actual Arkansas truck traffic were compared to those due to the current Arkansas legal loads for bridge …

Ncer Assistance Agreement Annual Progress Report For Grant #83582401 - Assessment Of Stormwater Harvesting Via Manage Aquifer Recharge (Mar) To Develop New Water Supplies In The Arid West: The Salt Lake Valley Example, Ryan Dupont, Joan E. Mclean, Richard C. Peralta, Sarah E. Null, Douglas B. Jackson-Smith

Civil and Environmental Engineering Faculty Publications

The goals of the original proposed project remain the same, that is, to test the hypothesis that Managed Aquifer Recharge (MAR) for stormwater harvesting is a technically feasible, socially and environmentally acceptable, economically viable, and legally feasible option for developing new water supplies for arid Western urban ecosystems experiencing increasing population, and climate change pressures on existing water resources. The project is being carried out via three distinct but integrated components that include: 1) Monitoring of existing distributed MAR harvesting schemes involving a growing number of demonstration Green Infrastructure (GI) test sites; 2) Integrated stormwater/vadose zone/groundwater/ ecosystem services modeling; and …

Engineering Success On The Field: A Reflection On The Epics Ironman Pediatric Prosthetic Project, Glynn Gallaway

Purdue Journal of Service-Learning and International Engagement

Glynn Gallaway is a student in the Purdue Mechanical Engineering Class of 2020 with interests in the health care, assistive technology, and medical device industries. Glynn is from Dallas, Texas, and was inspired to pursue this career path through her interactions with youth with special needs. She joined the EPICS Ironman team in the fall of 2016 during her first year at Purdue as a part of the learning community. In this article, she discusses her experiences on the Ironman team creating a pediatric prosthetic for a young local athlete. The goal of the Ironman team is to create a …

Collecting Standards For Scholarship, Organization, Industry, And Innovation, Julia Gelfand, Ibironke Lawal, Jill Powell, Anne Rauh

Libraries' and Librarians' Publications

Building on the successful 2017 presentation, A Primer in Science and Engineering Collection Development, this presentation will explore a content type that stumps the engineering librarian and acquisitions librarian alike - standards. Technical standards are documents that establish a uniform practice or process for materials, procedures, and products. Each of us uses standards daily - from USB ports to elevators to lights, automobiles, bridges, standardized train tracks, and much more. Standards are prepared and issued by a professional groups, committees, societies, or governmental agencies, and can influence safety and performance and the role of business and manufacturing.

Four librarians from …

The Development Of A Psychometric Test Aimed At Aligning Students To A Range Of Professional Roles, Darren Brian Carthy, Brian Bowe, Kevin Gaughan

Conference papers

Dublin Institute of Technology (DIT), working as part of the PREFER project, a European commission funded project, have developed a psychometric test in order to better align engineering students to three distinct professional roles within industry. This paper reports on the development process of the test, which took place between February and August of 2018.

Bs News November/December

Building Services Engineering

No abstract provided.

Open Source Low-Cost Power Monitoring System, Shane W. Oberloier, Joshua M. Pearce

Department of Materials Science and Engineering Publications

This study presents an entirely open-source, low-cost power monitoring system capable of many types of measurements including both loads and supplies such as solar photovoltaic systems. In addition, the system can be fabricated using only open source software and hardware. The design revolves around the Digital Universal Energy Logger (DUEL) Node, which is responsible for reading and properly scaling the voltage and current of a particular load, and then serializing it via an on-board ATTiny85 chip. The configuration of the DUEL node allows for custom sensitivity ranges, and can handle up to 50 A and 300 V. Up to 127 …

The Future Is Now Science Club, Shane Stan

Honors Expanded Learning Clubs

The Future is Now! What will our planet look like in 10, 20, 50, or even 100 years? Where will we live, what will we eat, how will we travel? Believe it or not, in the coming decades, many ideas that were once science fiction will come through to realization. With this, many of the discoveries and technologies making all of this happen are being developed right now as we go about our daily lives.

In this club, appropriately titled, The Future Is Now Science Club, students will be inspired to think larger about the present world they live in. …

Writing For Engineers, Susan Delamare

Open Educational Resources

No abstract provided.

Intensive Mentoring And Micro-Electronics Research For Students In Engineering (Immerse) 2016 Mentoring Environment Grant, Aaron Hawkins

Journal of Undergraduate Research

The MEG funds used for this projects supported undergraduate students working in the IMMERSE program starting in the Summer of 2016. IMMERSE employed a total of 49 students. Portions of the hourly wages charged by these students for their research work came from this MEG grant.

“There Is Never A Break”: The Hidden Curriculum Of Professionalization For Engineering Faculty, Idalis Villanueva, Taya Carothers, Marialuisa Di Stefano, Md. Tarique Hasan Kahan

Engineering Education Faculty Publications

The purpose of this exploratory special issue study was to understand the hidden curriculum (HC), or the unwritten, unofficial, or unintended lessons, around the professionalization of engineering faculty across institutions of higher education. Additionally, how engineering faculty connected the role of HC awareness, emotions, self-efficacy, and self-advocacy concepts was studied. A mixed-method survey was disseminated to 55 engineering faculties across 54 institutions of higher education in the United States. Quantitative questions, which centered around the influences that gender, race, faculty rank, and institutional type played in participants’ responses was analyzed using a combination of decision tree analysis with chi-square and …

Measuring Up: Engineering Stronger And Faster Cardiomyocytes, Kaitlyn Mcentire, Dr. Alonzo Cook

Journal of Undergraduate Research

If a heartbeat connotes life, then cardiomyocytes are the life givers. When heart disease results in cardiomyocyte death, however, these life-giving, beating cells are unable to reproduce, and portions of the heart irreversibly die. Despite modern technology and developments in heart disease treatment and prevention, heart disease remains the number one cause of death in America. With an inability to meet an ever-increasing demand for heart transplants, any potential alternative must be pursued.

Bs News September/October

Building Services Engineering

No abstract provided.

A Perceptual Comparison Of “Black Box” Modeling Algorithms For Nonlinear Audio Systems, Paul G. Mayo

Audio Engineering Theses

Nonlinear systems identification is a widespread topic of interest, particularly within the audio industry, as these techniques are employed to synthesize black box models of nonlinear audio effects. Given the myriad approaches to black box modeling, questions arise as to whether an “optimal” approach exists, or one that achieves valid subjective results as a model with minimal computational expense. This thesis uses ABX listening tests to compare black box models of three hardware audio effects using two popular nonlinear implementations, along with two proposed modified implementations. Models were constructed in the Hammerstein form using sine sweeps and a novel measurement …

A Case Study Of Engineering Students’ Experiences With The Co-Op Application Process, Laura F. Long, Xinrui Xu, Joyce B. Main

The Summer Undergraduate Research Fellowship (SURF) Symposium

Engineering faculty and advisors emphasize the importance of obtaining industry experience in addition to academic learning. One way universities encourage their students to obtain hands-on work experiences is through cooperative education (co-op) programs. Previous studies have examined the advantages and disadvantages of co-op participation, but the application process for students has not been closely examined. Studying this process will show how academic institutions and companies can potentially enhance the student experience of applying for a co-op position. This study examines student experiences with the co-op application process based on interviews with engineering students at a research-intensive university in the Midwestern …

Development And Characterization Of Aqueous-Based Recombinant Spider Silk Protein Biomaterials With Investigations Into Potential Applications, Thomas I. Harris

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

Spider silks are incredible natural materials that possess desirable combinations of strength, elasticity, weight, and robustness. Other properties such as biocompatibility and biodegradability further increase the worth of these materials. The possibility of farming spiders is impractical due to spiders’ natural behaviors. Modern biotechnologies have allowed for recombinant spider silk proteins (rSSps) to be produced without the use of spiders. However, the features responsible for spider silks impressive properties can cause difficulties with producing silk materials. A recently developed water-based and biomimetic solvation method has provided a solution to such difficulties and has also led to novel silk biomaterials. Most …

Opto-Thermal Characterization Of Plasmon And Coupled Lattice Resonances In 2-D Metamaterial Arrays, Vinith Bejugam

Graduate Theses and Dissertations

Growing population and climate change inevitably requires longstanding dependency on sustainable sources of energy that are conducive to ecological balance, economies of scale and reduction of waste heat. Plasmonic-photonic systems are at the forefront of offering a promising path towards efficient light harvesting for enhanced optoelectronics, sensing, and chemical separations. Two-dimensional (2-D) metamaterial arrays of plasmonic nanoparticles arranged in polymer lattices developed herein support thermoplasmonic heating at off-resonances (near infrared, NIR) in addition to regular plasmonic resonances (visible), which extends their applicability compared to random dispersions. Especially, thermal responses of 2-D arrays at coupled lattice resonance (CLR) wavelengths were comparable …

The Extraordinary Design Of The Bombardier Beetle: A Classic Example Of Biomimetics, Andy C. Mcintosh, Joseph Lawrence

Proceedings of the International Conference on Creationism

The innocuous looking bombardier beetle is one of the most remarkable creatures in the insect world. This tiny insect (1-1.5 cms long) is able to fight off any spider, frog, ant or bird that comes too close, by blasting the attacker with a powerful jet of hot, toxic fluid. Furthermore, the beetle can aim its weapon in any direction (even over its head) with pinpoint accuracy, and can reach distances of up to 20 cm with its spray. The bombardier beetle is rare in Europe but common in Africa, Asia and the warmer parts of the Americas, and in order …

Teaching And Learning Competencies Valued By Engineering Educators: A Pilot Study, Cormac H. Macmahon, Brian Bowe, Orla Mcconnell, Fiona Cranley

Articles

At the onset of this paper, it is important to provide context by highlighting two backdrop narratives, which have prompted and guided this research project:-(i) Since 2015, The National Forum for the Enhancement of Teaching & Learning in Ireland has undergone an extensive consultation process on professional development, resulting in a guiding document entitled the National Professional Development Framework (NPDF) for Staff Who Teach in Higher Education [1].(ii) The Technological University Alliance for Dublin has placed Dublin Institute of Technology (DIT), Institute of Technology Blanchardstown (ITB) and Institute of Technology Tallaght (ITT) on a merger trajectory towards technological university designation …

Bs News July/August

Building Services Engineering

No abstract provided.

Solar-Powered Bushfire Detection Mechanism, Aryaman Sud

The International Student Science Fair 2018

This project designed a prototype preventative measure for heat-induced disasters like bushfires and general home fires. The motivation for this project was the loss of life and property due to wildfire in rural Australia. The micro-controller will send an alert message and sound an alarm when the temperature value exceeds or equals the set temperature of . It is programmed using the programming language embedded ‘C’. Comprising of a solar panel, siren, temperature sensor and a Bluetooth module, this eco-friendly device can provide digitalised warnings to homes and farms where protection matters most.

Simplistic programming using the KEIL IDE software …

Innovation Governed By Godly Wisdom, Robert Chasnov

Engineering and Computer Science Faculty Publications

No abstract provided.

Intelligent Transportation, Michelle (Cummings) Solomon

Staff Publications

No abstract provided.

Data Defenders, Madison Claire Cannon

Alumni Publications

No abstract provided.

Mission Driven, Sandra W. Harner

Alumni Publications

No abstract provided.

High-Tech Jackets, Jeffrey Gilbert

Communication Faculty Publications

No abstract provided.

A Swing Generator Using Water Power Produced By The Wind, Ruka Ozaki

The International Student Science Fair 2018

I focus on various kinds of natural energy sources, especially wind. Wind power generation is the most-used method of electricity generation using wind power. Wind power generation has many merits; it achieves high efficiency of electric power generation, it can generate electricity even during the night, it doesn’t make any hazardous materials. However, there are not only merits but also demerits. It can cause bird strike, environment disruption from noise and low-frequency wave. And besides, we must comply building laws when we build wind power generators. Thus I built ‘a swing generator using water power produced by the wind power’, …