Engineering Commons^™

The Effects Of Silica On The Properties Of Vitreous Enamels, Signo Tadeu Dos Reis, Mike Koenigstein, Liang Fan, Genda Chen, Luka Pavic, Andrea Mogus-Milankovic

Materials Science and Engineering Faculty Research & Creative Works

Ground coat enamels for low carbon steel that contain silica as a mill addition have been developed to study the changes of their properties. Acid-resistant commercial enamel where silica addition was varied from 0 to 10.0 wt % was used for this investigation. The effects of the addition on the corrosion resistance, thermal properties, electrical properties, and mechanical adherence of the enamel to low carbon steel were studied. The corrosion resistance of the steel enameled coupons was tested using a salt spray (fog) apparatus for time periods reaching 168 h at room temperature. It was found that, although the density …

Numerical Simulations Of Premixed Flames Of Multi Component Fuels/Air Mixtures And Their Applications, Essa Kh I J Salem

Theses and Dissertations--Mechanical Engineering

Combustion has been used for a long time as a means of energy extraction. However, in the recent years there has been further increase in air pollution, through pollutants such as nitrogen oxides, acid rain etc. To solve this problem, there is a need to reduce carbon and nitrogen oxides through lean burning, fuel dilution and usage of bi-product fuel gases. A numerical analysis has been carried out to investigate the effectiveness of several reduced mechanisms, in terms of computational time and accuracy. The cases were tested for the combustion of hydrocarbons diluted with hydrogen, syngas, and bi-product fuel in …

Survey On Synchrophasor Data Quality And Cybersecurity Challenges, And Evaluation Of Their Interdependencies, Aditya Sundararajan, Tanwir Khan, Amir Moghadasi, Arif I. Sarwat

Electrical and Computer Engineering Faculty Publications

Synchrophasor devices guarantee situation awareness for real-time monitoring and operational visibility of smart grid. With their widespread implementation, significant challenges have emerged, especially in communication, data quality and cybersecurity. The existing literature treats these challenges as separate problems, when in reality, they have a complex interplay. This paper conducts a comprehensive review of quality and cybersecurity challenges for synchrophasors, and identifies the interdependencies between them. It also summarizes different methods used to evaluate the dependency and surveys how quality checking methods can be used to detect potential cyberattacks. This paper serves as a starting point for researchers entering the fields …

Experimental Study Of Low Cycle Fatigue Properties For Epoxy Resins With Dibutyl Phthalate (Dbp), Zhi Wang, Jiajia Zhou, Lianjian Song, Long Li

Department of Civil, Environmental, and Geospatial Engineering Publications

In order to improve the toughness of traditional epoxy resin, dibutyl phthalate (DBP) was introduced into the epoxy resin. The static mechanical performance of plasticized and unplasticized epoxy resin was evaluated. The test results showed that the DBP modified epoxy resin can obtain a higher toughness than conventional epoxy resin, but the elastic modulus and the tensile strength were slightly reduced. The low cycle fatigue test results indicated that the stress ratio and the stress level were two critical factors of fatigue life, which was increased with the growth of stress ratio. It was also found that the fatigue life …

Utah Code 73-3-30, Utah State Legislature

All In-stream Flows Material

73-3-30 Change application for an instream flow.

Cfd Modelling To Evaluate The Effect Of Digester Temperature On Biogas Production, Shuichi Torii

Manipal Journal of Science and Technology

Biogas production from chicken manure and food solid waste has grabbed the attention of engineers and managers globally because of the substantial advantages in achieving environmental protection, generation of energy and Green House Gas emission reductions. However, there are a number of problems involved in scaling up experimental Anaerobic Digestion (AD) plants to field level plants. One of the major problems associated with AD is mixing, which is a key component in segregating synthesized gas and biomass from digester liquid, enhancing homogeneity and in ensuring adequate contact between bacteria and substrate in the Anaerobic Digestion. Besides this, temperature plays a …

Wireless Coverage Using Unmanned Aerial Vehicles, Hazim Shakhatreh

Dissertations

The use of unmanned aerial vehicles (UAVs) is growing rapidly across many civilian application domains including real-time monitoring, search and rescue, and wireless coverage. UAVs can be used to provide wireless coverage during emergency cases where each UAV serves as an aerial wireless base station when the cellular network goes down. They can also be used to supplement the ground base station in order to provide better coverage and higher data rates for the users. During such situations, the UAVs need to return periodically to a charging station for recharging, due to their limited battery capacity. Given the recharging requirements, …

Impairments In Ground Moving Target Indicator (Gmti) Radar, Phuoc Doan Huu Vu

Dissertations

Radars on multiple distributed airborne or ground based moving platforms are of increasing interest, since they can be deployed in close proximity to the event under investigation and thus offer remarkable sensing opportunities. Ground moving target indicator (GMTI) detects and localizes moving targets in the presence of ground clutter and other interference sources. Space-time adaptive processing (STAP) implemented with antenna arrays has been a classical approach to clutter cancellation in airborne radar. One of the challenges with STAP is that the minimum detectable velocity (MDV) of targets is a function of the baseline of the antenna array: the larger the …

Optimizing Resource Allocation In Eh-Enabled Internet Of Things, Ali Shahini

Dissertations

Internet of Things (IoT) aims to bridge everyday physical objects via the Internet. Traditional energy-constrained wireless devices are powered by fixed energy sources like batteries, but they may require frequent battery replacements or recharging. Wireless Energy Harvesting (EH), as a promising solution, can potentially eliminate the need of recharging or replacing the batteries. Unlike other types of green energy sources, wireless EH does not depend on nature and is thus a reliable source of energy for charging devices. Meanwhile, the rapid growth of IoT devices and wireless applications is likely to demand for more operating frequency bands. Although the frequency …

Characterization Of Self-Heating Effects And Assessment Of Its Impact On Reliability In Finfet Technology, Peter Christopher Paliwoda

Dissertations

The systematically growing power (heat) dissipation in CMOS transistors with each successive technology node is reaching levels which could impact its reliable operation. The emergence of technologies such as bulk/SOI FinFETs has dramatically confined the heat in the device channel due to its vertical geometry and it is expected to further exacerbate with gate-all-around transistors.

This work studies heat generation in the channel of semiconductor devices and measures its dissipation by means of wafer level characterization and predictive thermal simulation. The experimental work is based on several existing device thermometry techniques to which additional layout improvements are made in state …

Load Balancing And Scalable Clos-Network Packet Switches, Oladele Theophilus Sule

Dissertations

In this dissertation three load-balancing Clos-network packet switches that attain 100% throughput and forward cells in sequence are introduced. The configuration schemes and the in-sequence forwarding mechanisms devised for these switches are also introduced. Also proposed is the use of matrix analysis as a tool for throughput analysis.

In Chapter 2, a configuration scheme for a load-balancing Clos-network packet switch that has split central modules and buffers in between the split modules is introduced. This switch is called split-central-buffered Load-Balancing Clos-network (LBC) switch and it is cell based. The switch has four stages, namely input, central-input, central-output, and output stages. …

The Cooperative Effects Of Channel Length-Bias, Width Asymmetry, Gradient Steepness, And Contact-Guidance On Fibroblasts’ Directional Decision Making, Quang Long Pham

Dissertations

Cell migration in complex micro-environments, that are similar to tissue pores, is important for predicting locations of tissue nucleation and optimizing scaffold architectures. Firstly, how fibroblast cells - relevant to tissue engineering, affect each other’s directional decisions when encountered with a bifurcation of different channel lengths was investigated. It was found that cell sequence and cell mitosis influence the directional choices that the cells made while chemotaxing. Specifically, the fibroblasts chose to alternate between two possible paths - one longer and the other shorter - at a bifurcation. This finding was counter-intuitive given that the shorter path had a steeper …

Magnetic Field Assisted Milli-Scale Robotic Assembly Machine: An Approach To Massively Parallel Swarm Robotic Automation Systems, Yan Liu

Dissertations

The vision of highly parallel, automated manufacturing systems that can build macroscopic products by heterogeneous assembly of many small devices will have a major impact in manufacturing. In this study, a novel milli-scale robotic assembly machine with parallel capabilities, assisted with programmable magnetic field, is developed. The machine prototype consists of a 16x16 array of electromagnets. The dimensions of the electromagnets are 5mm high with an inner diameter of 1.1mm and outer diameter of 2.5mm. All the electromagnets are driven by a 16x16 array of H-Bridges, and an Arduino microcontroller is used to control and program the arrays.

Using the …

Storage Systems For Mobile-Cloud Applications, Nafize R. Paiker

Dissertations

Mobile devices have become the major computing platform in todays world. However, some apps on mobile devices still suffer from insufficient computing and energy resources. A key solution is to offload resource-demanding computing tasks from mobile devices to the cloud. This leads to a scenario where computing tasks in the same application run concurrently on both the mobile device and the cloud.

This dissertation aims to ensure that the tasks in a mobile app that employs offloading can access and share files concurrently on the mobile and the cloud in a manner that is efficient, consistent, and transparent to locations. …

Methods To Improve The Remediation Of Polycyclic Aromatic Hydrocarbons (Pahs) In Aerobic And Anaerobic Environments, Brian Wartell

Dissertations

Oil spills occur regularly in terrestrial environments and crude oil can contain many compounds that are highly resistant to degradation. Among these compounds are high levels of polycyclic aromatic hydrocarbons (PAHs) which are not only toxic but can also be carcinogenic and/or mutagenic. The first chapter of this dissertation includes an extensive review chapter on the variables affecting the anaerobic degradation of hydrocarbons, with a particular focus on PAHs. Electron acceptors, electron donors, temperature, salinity, pH all play key roles in determining the possibility effective of effective degradation occurring. Thus, by addressing solutions, such as biostimulation, improving environmental variables for …

High-Speed Data Communications For Vehicular Networks Using Free-Space Optical Communications, Yagiz Kaymak

Dissertations

The demand for high-speed Internet access for vehicles, such as high-speed trains (HSTs) and cars, is on the rise. Several Internet access technologies that use radio frequency are being considered for vehicular networking. Radio-frequency communications technologies cannot provide high data rates due to interference, bandwidth limitations, and the inherent limited data rates of radio technology. Free-space optical communications (FSOC) is an alternative approach and a line-of-sight (LOS) technology that uses modulated light to transfer data between two free-space optical (FSO) transceivers. FSOC systems for vehicular networks are expected to provide data rates in the range of Gbps for stationary and …

Experimental And Numerical Characterization Of Multiphase Subsurface Oil Release, Feng Gao

Dissertations

Subsurface oil release is commonly encountered in the natural environment and engineering applications and has received the substantial attention of researchers after the disastrous Deepwater Horizon Blowout oil spill in 2009. The main focus on the present research is to systematically study the hydrodynamics of underwater oil jet under a variety of conditions, including the effect of dispersant and different gas to oil ratios (GOR) by using experimental measurement as well as a Computational Fluid Dynamics (CFD) approach, from which the measured turbulent characteristics (e.g., velocity, turbulent kinetic energy, turbulence dissipation rate, etc.) of underwater oil jet are thoroughly examined …

Overcoming Conventional Modeling Limitations Using Image- Driven Lattice-Boltzmann Method Simulations For Biophysical Applications, Olufemi E. Kadri

Dissertations

The challenges involved in modeling biological systems are significant and push the boundaries of conventional modeling. This is because biological systems are distinctly complex, and their emergent properties are results of the interplay of numerous components/processes. Unfortunately, conventional modeling approaches are often limited by their inability to capture all these complexities. By using in vivo data derived from biomedical imaging, image-based modeling is able to overcome this limitation.

In this work, a combination of imaging data with the Lattice-Boltzmann Method for computational fluid dynamics (CFD) is applied to tissue engineering and thrombogenesis. Using this approach, some of the unanswered questions …

Cardiac Regenerative Medicine: Insights From Healthy And Diseased Engineered Tissues, Pamela Grace Hitscherich

Dissertations

Cardiovascular disease remains the leading cause of mortality in the United States. Current tissue engineering approaches have fallen short of promoting fully functional cardiovascular cells and the post-myocardial infarction microenvironment is still not well understood. These gaps in knowledge are addressed in this dissertation through the development of in vitro engineered cardiac tissues using electroactive materials to enhance the differentiation of pluripotent stem cell derived cardiomyocytes and through the development of in vitro myocardial inflammation models dedicated to understanding cardiomyocytes and macrophages interactions.

Specifically, piezoelectric poly (vinylidene fluoride-trifluoroethylene) (PVDF-TrFE) supports the attachment and survival of mouse embryonic stem cell derived …

17-06 Public Vs Private Transportation Network Accessibility And Maternal-Infant Health Outcomes Across The Urban-Rural Boundary In Kalamazoo County, Michigan, Kathleen Baker

Transportation Research Center Reports

This project is twofold. The first part of the project deals specifically with the benefits of multimodal transportation modeling to understand community structure of public health access in a community. Maternal risk and infant outcomes are examined in Kalamazoo County, MI with respect to transportation network accessibility by public transit and private vehicle across the urban-rural continuum. Infants born to mothers just outside the urban core had a higher rate of poor outcomes. Maternal risk factors, by contrast, were associated with the accessible rural areas – areas outside the city proper, but within 30 minutes by car to services. When …

17-05 Effects Of Safe Bicycle Passing Laws On Drivers' Behavior And Bicyclists' Safety, Ron Van Houten, Jun-Seok Oh, Valerian Kwigizile, Ahmad Feizi, Majid Mastali

Transportation Research Center Reports

This report identifies the effect of passing distance laws on drivers’ behaviors and bicyclist’s safety during an overtaking maneuver. Using an instrumented bicycle and driver survey, the study measured bicycle passing in a naturalistic field experiment using video recording, an ultrasonic distance measuring device, and a LiDAR. In order to evaluate the effect of passing distance laws, the study examined jurisdictions with a three-foot passing law, with a five-foot passing law, and without a passing law. The experiment required a bicyclist to ride the instrumented bicycle in two-lane and three-lane roads to capture the distance between the bicycle and the …

Analysis Of 3d Printed Ndfeb Polymer Bonded And Organic Based Magnets, Chimaobi Ibeh

Theses

Additive manufacturing (AM), or commonly known as 3D printing, has introduced to the manufacturing and commercial sectors novel ways of reducing production times, decreasing material waste, and enabling end products with multi-material configuration and complex geometric designs. From industrial scale to customer-based printers, AM has revolutionized the approach to manufacturing, prototyping, and designing in the field of medical, automotive, aerospace, biomedical, electronics and customizable products. Recently, additive manufacturing has crossed over to the area of applications in magnetism due to the economic push for the miniaturization of electronic and mechanical devices, reduction in production costs and material & design flexibility. …

Rancang Bangun Alarm Deteksi Asap Rokok Dan Kebisingan Pada Ruang Kelas Secara Otomatis Berbasis Mikrokontroler, Imas Dian Ratnasari

Elinvo (Electronics, Informatics, and Vocational Education)

Abstrak- Asap rokok dan kebisingan merupakan masalah yang sering terjadi di sekolah, sedangkan dalam penanganan masalah asap rokok dan kebisingan di sekolah belum maksimal karena belum terdapat alat yang mampu mendeteksi asap rokok sekaligus kebisingan yang diterapkan di sekolah. Pemantauan kondisi ruang kelas agar tetap kondusif perlu diadakan, maka dari itu dilakukan pengembangan alarm deteksi asap rokok dan kebisingan pada ruang kelas secara otomatis. Penelitian ini bertujuan untuk membantu guru dalam memonitoring kondisi di ruang kelas ketika ruang kelas sedang tidak ada guru. Metode penelitian yang digunakan adalah Research and Development (R&D), yang terdiri dari beberapa tahapan mulai yaitu dari …

Icing Thickness Prediction Model For Overhead Transmission Lines, Yue Ming

Theses

Failures in a large electric power system are often inevitable. Severe weather conditions are one of the main causes of transmission line failures. Using the fault data of transmission lines of Shaanxi Power Grid from 2006 to 2016, in conjunction with meteorological information, this paper analyses the relationship between the temporal-spatial distribution characteristics of meteorological disasters and the fault of transmission lines in Shaanxi Province, China.

In order to analyze the influence of micro-meteorology on ice coating, a grey correlation analysis method is proposed. This thesis calculates the grey relational between ice thickness and micro-meteorological parameters such as ambient temperature, …

Otomasi Sistem Hidroponik Dft (Deep Flow Technique) Berbasis Arduino Android Dengan Memanfaatkan Panel Surya Sebagai Energi Alternatif, Eko Agus Suprayitno Mt, Rohman Dijaya M. Kom, M. Atho㢂¬„¢Illah St

Elinvo (Electronics, Informatics, and Vocational Education)

The application of hydroponic farming methods has been widely applied by the community, the system used is still manual so that it lacks quality, both in terms of humidity and growth. For that we need a system that is able to regulate the time of watering and the provision of nutritional solutions automatically without disturbing the activity. In the design of an automatic DFT hydroponic system using an Android Arduino based solar panel. Where the solar panel system functions as a renewable energy substitute for PLN which will fill the accumulator. The accumulator filling process is equipped with a solar …

Interactions Between Polymer Nanoparticles And Blood Plasma Applied To Drug Delivery Systems, Mark Bannon

Theses

Targeted nanoparticle drug delivery has the potential to replace current forms of cancer therapy with previously unparalleled efficiency. Upon introduction into the human body, nanoparticles exhibit a substantial increase in diameter due to a biomolecular corona formation caused by interactions between blood plasma proteins and the nanoparticles. These interactions must be analyzed and understood for targeted delivery to reach its potential in both feasibility and efficiency.

To study the formation of the protein corona, polystyrene nanoparticles were incubated in vitro in goat blood plasma for 10-minute intervals, diluted to different degrees and then measured to obtain the hydrodynamic diameter of …

Computational Intelligence In Steganography: Adaptive Image Watermarking, Xin Zhong

Dissertations

Digital image watermarking, as an extension of traditional steganography, refers to the process of hiding certain messages into cover images. The transport image, called marked-image or stego-image, conveys the hidden messages while appears visibly similar to the cover-image. Therefore, image watermarking enables various applications such as copyright protection and covert communication. In a watermarking scheme, fidelity, capacity and robustness are considered as crucial factors, where fidelity measures the similarity between the cover- and marked-images, capacity measures the maximum amount of watermark that can be embedded, and robustness concerns the watermark extraction under attacks on the marked-image. Watermarking techniques are often …

Development Of Flexible Nickel-Zinc And Nickel-Iron Batteries, Xianyang Meng

Dissertations

The fabrication of flexible nickel-zinc batteries using a facile mixing of electroactive components for electrode preparation is presented. Polytetrafluoroethylene (PTFE) is found to be an effective binder by reducing concentration polarization, providing chemical/physical stability and enhancing flexibility. The zinc electrode containing PTFE maintains its original porous morphology even after hundreds of cycles while polymers such as PEO show morphology change. Each component, as well as the assembled flexible cells show desired flexibility and stability even under bending conditions.

The fabrication of flexible nickel-iron batteries using printable composite electrodes embedded with multiwalled carbon nanotubes (CNT) is also presented. All the metal …

Orbital Angular Momentum Generation Using Composite Quasi-Continuous Metasurfaces With Perfect Efficiency, Menglin L.N. Chen, Li (Lijun) Jun Jiang

Electrical and Computer Engineering Faculty Research & Creative Works

A composite perfect electric conductor (PEC)-perfect magnetic conductor (PMC) metasurface is proposed for orbital angular momentum (OAM) generation. Each scatterer on the metasurface consists of an anisotropic PEC layer and an isotropic PMC layer. Unlike conventional metasurfaces that composed of discrete scatterers, the scatterers on the proposed metasurface form a quasi-continuous pattern. Therefore, negative consequences of periodicity breaking from the patterned scatterers with varying sizes or orientations and their mutual coupling are avoided. We model the scatterer using Jones matrix. Its design is based on the features of PEC and PMC, which abandons complicated optimization process. The patterning of scatterers …

Theory Of Potential-Based Integral-Form A-Φ Formulation In Electromagnetic Applications, Qin S. Liu, Li (Lijun) Jun Jiang, Sheng Sun, Qi Dai, Weng Cho Chew

Electrical and Computer Engineering Faculty Research & Creative Works

Recent progress on the theory of potential-based A-φ formulationin the integral form and its electromagnetic applications are summarized and presented here. By using Lorenz gauge and solving the vector and scalar potential formulations in tandem, the A-φ formulationac-curately captures the correct physics of both electrostatics and magnetostatics. The wide-band stable, dense-discretization breakdown free and structure-independent solver provides an alternative solution to various electromagnetic scattering and circuital problems. Also, the A-φformulationis applied to solve the characteristic modes at low frequencies.