Engineering Commons^™

Use Of Lidar In The Design Of Grassed Waterways: Case Study In Agricultural Management In Oklahoma, Annette Sparks

Dissertations, Master's Theses and Master's Reports

Before the advent of Light Detection and Ranging (LiDAR) technology, farm-level infrastructure for sustainable agriculture was designed using topographic maps. LiDAR is a remote sensing method whereby reflected laser pulses are measured to generate high-resolution 3D images of the terrain. This report compares these two methods in the design of grassed waterways for flood drainage and evaluates how the quantitative difference between the two methods can affect the overall hydrologic design. The benefits of LiDAR are expected to be higher accuracy and precision in design, as well as greater reproducibility or consistency, regardless of the designer. To carry out this …

A Cultural And Technical Study Of Wastewater Treatment Plant Maintenance In A Small Community In Peru, Rebecca C. Midkiff

Dissertations, Master's Theses and Master's Reports

Management of wastewater treatment plants (WWTPs) has been found to be especially challenging in small, rural communities of the developing world. This study examined maintenance of two small WWTPs in Leymebamba and Palmira, Peru through interviews with local authorities, observation of maintenance practices, wastewater measurements, and prediction of effects from maintenance with modeling using a wastewater process simulation software, BioWin. Challenges and motivations related to maintenance were investigated with semi-structured interviews, and maintenance practices were recorded during observations. It was found that outside supervision was a key motivating factor, and the existence of an operator who is supported by the …

Design Features And Optimization Of Profile Extrusion Dies, Abhishek Sai Erri Pradeep

Dissertations, Master's Theses and Master's Reports

This report deals with design of dies used in the plastic extrusion industry. The design methodology for extrusion dies has evolved over the years with advancement of computing technology. However, the design process is still heavily dependent on the experience of the die designer, and hence is still considered to be more of an art than science. Even for an experienced designer, the time required to design the die and perform consecutive fine tuning iterations is high. In this report, a proprietary optimization code for extrusion dies, .developed by Plastic Flow LLC, was tested and shown to be advantageous over …

Integration And Testing Of An Advanced Conformable Cng Tank In A Full-Sized Light-Duty Pickup, Abayomi Famuyiwa

Dissertations, Master's Theses and Master's Reports

Michigan Technological University is collaborating with Southwestern Energy and REL Inc. to develop and integrate a compressed natural gas (CNG) matrix tank that enables efficient packaging, increases range, and reduced cost for CNG vehicle applications. The vehicle being used in this project is a light-duty pickup truck to take advantage of the open space underneath the body and bed of the vehicle. With today’s cylindrical CNG tanks consuming cargo space, a solution is to develop a tank capable of being shaping to the underbody of the truck to free cargo space. University faculty and graduate students utilizes Finite Element Analysis …

An Experimental Investigation Of Low Temperature Combustion Regimes In A Light Duty Engine, Kaushik Kannan

Dissertations, Master's Theses and Master's Reports

A continuous investigation on the improvement of internal combustion engines is necessary due to the stringent emission and fuel economy regulations. Low Temperature Combustion (LTC) is a promising field of research since it can simultaneously reduce NOx and soot while attaining high thermal efficiencies in automotive engines. A thorough study of several LTC regimes is necessary to understand the quantitative comparison and the extent of feasibility of these regimes functioning on an automotive engine. This thesis concentrates on an experimental investigation of three different LTC modes namely Homogeneously Charged Compression Ignition (HCCI), Partially Premixed Compression Ignition (PPCI) and Reactivity Controlled …

An Assessment Of The Validity Of The Kinetic Model For Liquid-Vapor Phase Change By Examining Cryogenic Propellants, Kishan Bellur

Dissertations, Master's Theses and Master's Reports

Evaporation is ubiquitous in nature and occurs even in a microgravity space envi- ronment. Long term space missions require storage of cryogenic propellents and an accurate prediction of phase change rates. Kinetic theory has been used to model and predict evaporation rates for over a century but the reported values of accommodation coefficients are highly inconsistent and no accurate data is available for cryogens. The proposed study involves a combined experimental and computational approach to ex- tract the accommodation coefficients. Neutron imaging is used as the visualization technique due to the difference in attenuation between the cryogen and the metallic …

A Fault Tolerant, Data Fusion System For Navigation Applications To A Ducted Fan Vtol Uav, Jian Lu

Dissertations, Master's Theses and Master's Reports

A Fault Tolerant, Data Fusion (FTDF) algorithm for a Ducted Fan Unmanned Aerial Vehicle (DFUAV) Navigation System is presented. The algorithm have two parts: Gradient Descent (GD) for the Attitude and Heading Reference System (AHRS) and an Interacting Multiple Model (IMM) for position estimation. The GD methodology was designed to fuse the gyroscope, accelerometer, and geomagnetic sensors. The IMM algorithm is able to identify and compensate for multiple sensors data failures. There are three parts in the presentation.

Firstly, system identification and the Allan Variance method is used to build dynamic models and noise models for multiple Sensors and Actuators. …

Modeling, Simulation And Control Of Hybrid Electric Vehicle Drive While Minimizing Energy Input Requirements Using Optimized Gear Ratios, Sanjai Massey

Dissertations, Master's Theses and Master's Reports

This project was conducted to analyze (model and simulate) and optimize an electric motor based drive system to propel a typical passenger vehicle in an urban driving environment. Although there are many HEV and EV type systems on the market today, this paper chose the Toyota Prius HEV system as a baseline using a brushless AC motor.

Although a vehicle can be driven many ways, a more standardized Urban Dynamometer Driving Schedule, UDDS, was chosen to simulate real driving conditions. This schedule is determined by the US Environmental Protection Agency, EPA, and is intended to represent the city driving conditions …

Inhibition Of Bacterial Growth And Prevention Of Bacterial Adhesion With Localized Nitric Oxide Delivery, Julia Osborne

Dissertations, Master's Theses and Master's Reports

Bacterial infections continue to be a problem at the site of an indwelling medical device, and over the years, various bacterial strains have become more resistant to current antibiotic treatments. Bacterial infection at an indwelling medical device can be dangerous and affect the performance of the medical device which can ultimately lead to the failure of the device due to bacterial resistance to treatment.

Nitric Oxide (NO) has been shown to possess antibacterial properties to prevent and inhibit bacterial growth. NO releasing coatings on indwelling medical devices could provide a reduction in bacterial infections that occur at the device site …

A Petrophysical Evaluation For Permeability Of A Gas Reservoir In The Taranaki Basin, New Zealand, Musa Cetin

Dissertations, Master's Theses and Master's Reports

The goal of this study was to evaluate permeability and study the controls on permeability in a gas saturated formation. Conventional well logs, mineral identification crossplots and empirical models were applied to analyze different lithologic and diagenetic features and to examine the effect that these features may have on the reservoir. An unusual feature was observed, and required detailed examination: there existed (in two wells) five zones of lower resistivity (higher water saturation) above the gas-water contact. This is unexpected, as above that contact, the water is usually at irreducible water saturation. I conclude that the lower resistivity (the higher …

Towards A Generic Ontology For Solar Irradiance Forecasting, Abhilash Kantamneni

Dissertations, Master's Theses and Master's Reports

The growth of solar energy resources in recent years has led to increased calls for accurate forecasts of solar irradiance for the reliable and sustainable integration of solar into the national grid. A growing body of academic research has developed models for forecasting solar irradiance, identified metrics for comparing solar forecasts, and described applications and end users of solar forecasts.

In recent years, many disciplines are developing ontologies to facilitate better communication, improve inter-operabiity and refine knowledge reuse by experts and users of the domain. Ontologies are explicit and formal vocabulary of terms and their relationships. This report describes a …

On The Applications Of Interactive Theorem Proving In Computational Sciences And Engineering, Amer Tahat

Dissertations, Master's Theses and Master's Reports

Interactive Theorem Proving (ITP) is one of the most rigorous methods used in

formal verification of computing systems. While ITP provides a high level of confidence in the correctness of the system under verification, it suffers from a steep learning curve and the laborious nature of interaction with a theorem prover. As such, it is desirable to investigate whether ITP can be used in unexplored (but high-impact) domains where other verification methods fail to deliver. To this end, the focus of this dissertation is on two important domains, namely design of parameterized self-stabilizing systems, and mechanical verification of numerical approximations …

Wireless Implantable Magnetoelastic Sensors And Actuators For Biomedical Applications, Andrew Derouin

Dissertations, Master's Theses and Master's Reports

Magnetoelastic sensors represent a low-cost wireless and battery-less method for monitoring parameters in embedded or implanted applications; however, some limitations still exist preventing their commercial implementation. Presented in this work are a variety of studies that are aimed at improving the feasibility of magnetoelastic materials for sensing and actuating applications. Magnetoelastic resonant sensors of non-standard geometries were investigated to determine if geometry could play a role on the sensitivity of the sensor response to mass loading. It was shown that a significant increase in sensitivity could be achieved by using triangular sensors rather than standard rectangular strips. A method for …

Design Of A Mobile Underwater Charging System, Brian R. Page

Dissertations, Master's Theses and Master's Reports

Autonomous Underwater Vehicles (AUVs) are extremely capable vehicles for numerous ocean related missions. AUVs are energy limited, resulting in short mission endurance on the scale of hours to days. Underwater Gliders (UGs) are able to operate on the order of months to years by using nontraditional propulsion methods. UGs, however, are unable to perform missions requiring high speed or direct forward motion due to the nature of their buoyancy driven motion. This work reviews the current state of the art in recharging AUVs and offers an underwater recharging network concept at a significantly reduced cost to traditional methods. The solution …

Representation And Analysis Of Multi-Modal, Nonuniform Time Series Data: An Application To Survival Prognosis Of Oncology Patients In An Outpatient Setting, Jennifer Winikus

Dissertations, Master's Theses and Master's Reports

The representation of nonuniform, multi-modal, time-limited time series data is complex and explored through the use of discrete representation, dimensionality reduction with segmentation based techniques, and with behavioral representation approaches. These explorations are done with a focus on an outpatient oncology setting with the classification and regression analysis being used for length of survival prognosis. Each decision of representation and analysis is not independent, with implications of each decision in method for how the data is represented and then which analysis technique is used. One unique aspect of the work is the use of outpatient clinical data for patients, which …

Integrated Computational And Experimental Evaluation Of Electromagnetic Energy-Induced Self-Healing Performance Of Asphalt Composites, Zigeng Wang

Dissertations, Master's Theses and Master's Reports

The objective of this doctoral research is to investigate the electromagnetic energy induced self-healing effect of modified asphalt mixture material by developing computational and experimental characterization tools. More than 90% of the pavements in United States are constructed by asphalt mixture. The durability of pavement decreased by distresses has significant impact on maintenance costs. The asphalt mixture has self-healing capability because the asphalt could flow and fill the microcracks if enough external energy can be transmitted to the asphalt mixture system. However, the self-healing capability of asphalt is limited based on the climatic condition and traffic volume. Therefore, it is …

Experimental Investigations Of Fused Filament Fabrication For Applications To Affordable Scientific Hardware, Bas Wijnen

Dissertations, Master's Theses and Master's Reports

This research aims to make science more accessible through the use of open source 3-D printers.

A new control system for CNC machines in general and 3-D printers specifically, is developed and presented that enables web-based control of 3-D tools from any Internet connected device. The system can be set up and controlled entirely from a web interface.

A tool was designed to help apply science to the developing world. The developing world remains plagued by lack of access to safe drinking water. A methodology is provided for the design, development, and technical validation of a low-cost open-source water testing …

Air Charge Estimation For An Si Engine Using In-Cylinder Pressure Sensor, Arya Yazdani

Dissertations, Master's Theses and Master's Reports

An accurate estimation of cycle by cycle in-cylinder mass and the composition of the combustion chamber charge is required for engine control strategies to meet stringent pollution emission and fuel consumption regulations. Estimation of fresh charge and residual gas masses is beneficial in terms of fuel efficiency, tailpipe emissions, engine performance, for engine control strategies. Air-flow meter, which is mounted in the intake air circuit, can be utilized in a closed-loop strategy to control air charge. However, air flow meter has a response delay; moreover dynamics of intake manifold and pipes must be taken into consideration to improve the estimation …

Nanosphere Lithography And Its Application In Rapid And Economic Fabrication Of Plasmonic Hydrogenated Amorphous Silicon Photovoltaic Devices, Chenlong Zhang

Dissertations, Master's Theses and Master's Reports

Solar photovoltaic (PV) devices harvest energy from solar radiation and convert it to electricity. PV technologies, as an alternative to traditional fossil fuels, use clean and renewable energy while minimizing pollution. For decades researchers have been developing thin film solar cells as an important alternatives to the relatively expensive bulk crystal solar cell technology. Among those, hydrogenated amorphous silicon (a-Si:H) solar cells prevails for good efficiency, non-toxic and materially abundant nature. However, a-Si:H thickness must be minimized to prevent light induced degradation, so optical enhancement is necessary. Light manipulation has to be applied and carefully engineered to trap light within …

Dynamic Atomistic Study Of Tunnel Functions In Nanostructured Transitional Metal Oxides, Yifei Yuan

Dissertations, Master's Theses and Master's Reports

Alpha (α-) MnO₂ is a well know transitional metal oxide possessing one dimensional 2×2 (4.6 × 4.6 Ų) tunnels for accommodation of various ions. Such a characteristic tunneled structure has enabled the wide applications of α-MnO₂ in the fields of ion exchange, molecular sieves, biosensor, catalysis and energy storage. This PhD dissertation focuses on the dynamic study of ion transport functionality of α-MnO₂ at atomic level using an aberration corrected scanning transmission electron microscopy equipped with a special holder with a scanning tunneling microscopy probe.

The wide application of in situ TEM studying the dynamic …

Experimental Investigation Of Fast Pyrolysis Of Arundo Donax In A Novel Paddle Reactor, Chintan Desai

Dissertations, Master's Theses and Master's Reports

The main objective of this research was to show the effectiveness of a novel paddle reactor for fast pyrolysis and study the effect of biomass particle size and reaction temperature of Arundo Donax a type of energy crop on the bio-oil yields. The novel paddle reactor showed effective mixing and heat transfer which were proved with the help of studying the residence time and the heating characteristics of the system respectively. The effect of different biomass particle sizes on the bio-oil yield was not significant, the bio-oil yield was approximately 50% for all the sizes. For Arundo Donax particle sizes …

Probability-Based Hurricane Resilience Evaluation And Retrofitting For Residential Community, Yadong Dong

Dissertations, Master's Theses and Master's Reports

Wood residential construction is vulnerable to hurricanes, as evident in recent hurricane events. Many studies indicated that the changing climate may very likely alter hurricane patterns, which could lead to more severe hurricane damage to the wood residential construction that accounts for 90% of the residence in the USA. On the other hand, deterioration of material increases the chance of structural failure by reducing the structural capacity (e.g., corrosion of fasteners in roof panel could significantly reduce the withdrawal capacity of the roofing structure during hurricane events).

Currently, most hurricane damage estimations only focus on direct loss (e.g., structural loss). …

Thermomechanical Processing Of Aluminum Micro-Alloyed With Sc, Zr, Ti, B, And C, Cameron Mcnamara

Dissertations, Master's Theses and Master's Reports

Critical exploration of the minimalistic high strength low alloy aluminum (HSLA-Al) paradigm is necessary for the continued development of advanced aluminum alloys. In this study, scandium (Sc) and zirconium (Zr) are examined as the main precipitation strengthening additions, while magnesium (Mg) is added to probe the synergistic effects of solution and precipitation hardening, as well as the grain refinement during solidification afforded by a moderate growth restriction factor. Further, pathways of recrystallization are explored in several potential HSLA-Al systems sans Sc. Aluminum-titanium-boron (Al-Ti-B) and aluminum-titanium-carbon (Al-Ti-C) grain refining master alloys are added to a series of Al-Zr alloys to examine …

The Effect Of Community Connectivity On Water And Sanitation Systems In Rural Panama, M.C. Moritz

Dissertations, Master's Theses and Master's Reports

The world has yet to realize universal access to water and sanitation. Various academic and professional fields provide frameworks for understanding water and sanitation access, but none directly consider the impact of community connectivity. Community connectivity refers to the infrastructures linking rural communities with urban centers. These infrastructures fall under the broad categories of transportation, energy, and telecommunication. This paper examines 23 rural Panamanian communities and compares connectivity measures with the functionality of the communities’ rural water and sanitation systems (RWSS). Community connectivity was evaluated with the Community Connectivity Analysis Tool (CCAT), while the water and sanitation systems were evaluated …

Property Analysis Of The Asphalt Materials Using Molecular Dynamics (Md) Method, Hui Yao

Dissertations, Master's Theses and Master's Reports

The main objectives of this dissertation are to build the Molecular Dynamics (MD) model for the asphalt binders with three components, asphaltenes, aromatics and saturates, and analyze the properties of the asphalt models to discover the interactions and mechanisms of asphalt-aggregate and asphalt-modifier. The contributions of this dissertation are summarized as follows: (1) the Amber Cornell Extension Force Field (ACEFF) was assigned to each component, and most of the parameters of the force field were obtained from the General Amber Force Field (GAFF). Electrostatic Potential (ESP) charges were assigned to each atom with the NWChem calculation; (2) the modified asphalt …

Designing A Permeable Reactive Barrier For The Remediation Of Copper Contaminated Groundwater., Christopher Walkons

Dissertations, Master's Theses and Master's Reports

This project details the design of a sorption based pilot-scale permeable reactive barrier (PRB) for the removal of copper from groundwater. The reactive material for the barrier is the residual of coagulants used in drinking water treatment operations. Physical and chemical properties of these water treatment residuals (WTR) have been studied to optimize PRB design. Batch reactor tests have shown that equilibrium sorption of copper can be fit to a Langmuir type isotherm. Kinetic and column experiments have been conducted to understand the significance of chemical and physical mass transfer limitations. A leaching test indicated the concentrations of hazardous elements …

Enhancing Osseointegration Of Orthopaedic Implants With Titania Nanotube Surfaces, Erin A. Baker

Dissertations, Master's Theses and Master's Reports

Introduction: As joint arthroplasty surgical procedures increase annually, the development of new strategies, including novel materials and surface modifications, to attain solid bone-implant fixation are needed to increase implant terms of service. In this study, we evaluate two morphologies of titania nanotubes in both in vitro and in vivo experiments to quantify osseointegrative potential and material-level biocompatibility.

Materials and Methods: Samples were prepared via an electrochemical etching process. Two different titania nanotube (TiNT) morphologies were produced, Aligned and Trabecular. For the in vitro experiment, Sprague Dawley (SD) rat marrow-derived bone marrow cells (BMC) were seeded on samples. Alkaline phosphatase (ALP) …

A Sustainability-Based Project Selection Algorithm: Socio-Technical-Economic Project Selection (Steps) Algorithm, Bharathi Bhattu

Dissertations, Master's Theses and Master's Reports

Multi-dimensional aspects play a vital role in the task of project-decision making. Environmental effects are to be considered in addition to other technical and non-technical aspects in order to avoid undue environmental damage. This current work introduces a new decision-making algorithm (Socio-Technical-Economic Project Selection or STEPS) that is demonstrated with the use of RCA (recycled concrete aggregate) as riprap for slope stabilization and erosion control which leaches chemical arsenic when in contact with water. Arsenic has long been recognized for its lethal properties. The main intention of introducing this new algorithm is to use sustainability concepts of social, technical, and …

Low Temperature Split Injection Spray Combustion: Ignition, Flame Stabilization And Soot Formation Characteristics In Diesel Engine Conditions, Ahmed Abdul Moiz

Dissertations, Master's Theses and Master's Reports

The aim of the PhD work is to investigate the fundamental differences in combustion behavior when split injections are used in low temperature combustion regime. In this thesis, the first injection is also called as pilot injection and second injection is also called as main injection. The broad aspects which are studied encompassing the investigation is to study the ignition delay, lift-off and soot formation of such a double split spray combustion. The mechanisms of ignition, lift-off and soot production are to be studied since the main ignition and lift-off were found to differ from the pilot which effect net …

Investigation And Modeling Of Al3(Sc, Zr) Precipitation Strengthening In The Presence Of Enhanced Supersaturation And Within Al-Cu Binary Alloys, Kyle Deane

Dissertations, Master's Theses and Master's Reports

Diffuse Al-Sc and Al-Zr alloys have been demonstrated in literature to be relatively coarsening resistant at higher temperatures when compared with commonly used precipitation strengthening alloys (e.g. 2000 series, 6000 series). However, because of a limited strengthening due to the low solubility of scandium and zirconium in aluminum, and owing to the scarcity and therefore sizeable price tag attached to scandium, little research has been done in the way of optimizing these alloys for commercial applications.

With this in mind, this dissertation describes research which aims to tackle several important areas of Al-Sc-Zr research that have been yet unresolved. In …