Engineering Commons^™

Webinar: State-Wide Pedestrian And Bicycle Miles Traveled: Can We Estimate It?, Krista Nordback

TREC Webinar Series

Heard of Vehicle Miles Traveled (VMT)? Wouldn’t it be great to know the corresponding value for walking and cycling?

This webinar discusses options for estimating the miles people walk and bicycle on the state-wide level, by investigating the practical considerations of trying to compute these values for one study state.

What strategies can be used, and what data sources do these require?

How do these strategies compare?

How do PMT/BMT estimates vary based on data?

Find out what researchers found and what obstacles they encountered when they tried to estimate bicycle and pedestrian miles traveled in the State of Washington.

Pricing And Reliability Enhancements In The San Diego Activity-Based Travel Model, Joel Freedman

PSU Transportation Seminars

The estimation of demand for priced highway lanes is becoming increasingly important to agencies seeking to improve mobility and find alternative revenue sources for the provision of transportation infrastructure.

However, many modeling tools fall short of what is required for robust estimates of demand with respect to toll and managed lanes in two key areas:

• The value-of-time is often aggregate and not consistently defined throughout the model system, and
• The reliability of transport infrastructure is rarely taken into account.

This presentation describes an effort which implemented recommendations of the Strategic Highway Research Program C04 and L03\L04 tracks on pricing and …

Evaluation Of A Supervisor Training Program For Odot’S Ecodrive Program, Donald M. Truxillo, John Macarthur, Leslie B. Hammer, Talya N. Bauer

TREC Final Reports

Eco-driving consists of using energy-efficient approaches to driving aimed at reducing fuel consumption and, ultimately, CO2 emissions. A previous study found that an EcoDrive informational campaign was effective at increasing the use of eco-driving behaviors, but only when employees perceived that their supervisor supported the program and when they were personally motivated to perform the eco-driving behaviors. In order to build upon the findings of our previous study, the present study focused on increasing the use of eco-driving behaviors through an informational eco-driving campaign combined with supervisor training to support the use of eco-driving practices.

In this study we collected …

Safety Effectiveness Of Pedestrian Crossing Enhancements, Christopher M. Monsere, Miguel Figliozzi, Sirisha Kothuri, Ali Razmpa, Daniel R. Hazel

Civil and Environmental Engineering Faculty Publications and Presentations

Over the last decade, the Oregon DOT and other agencies have systematically implemented many pedestrian crossing enhancements (PCEs) across the state. This study explored the safety performance of these enhanced crossing in Oregon. Detailed data were collected on 191 crossings. Supplemental data items included crossing location information, route characteristics, surrounding land use and crossing enhancement descriptions. Pedestrian volume at the crossing locations was a highly desirable but unavailable data element. To characterize pedestrian activity, a method was developed to estimate ranges for pedestrian crosswalk activity levels based on the land use classification at the census block level and the presence …

Webinar: Transit Signal Priority Evaluation And Performance Measures, Miguel Figliozzi

TREC Webinar Series

Transit signal priority (TSP) can reduce transit delay at signalized intersections by making phasing adjustments. TSP is a relatively inexpensive tool to provide faster and more reliable transit service. This webinar addresses TSP real-word performance measures as well as data integration and evaluation challenges. Results of the TSP evaluation in an arterial corridor in Portland, Oregon indicate that a timely and effective TSP system requires a high degree of sophistication, monitoring, and maintenance. TSP timing is crucial to reduce transit delay.

Key takeaways include: performance measures, methodology, analysis of early green and red extension pros and cons, novel real-world results.

Exploring Length-Based Vehicle Count Data, Byad Ahmed

Civil and Environmental Engineering Master's Project Reports

The development of Intelligent Transportation Systems (ITS) requires high-quality traffic information within most urban areas worldwide, and under growing pressure for improving traffic management, there has been an increasing urge to collecting and monitoring of traffic data. One of the most reliable and recommended technology for drive thru or traffic control is the loop vehicle detection system. On the Portland freeway system, new software has been installed that allows the reporting of vehicle length in bins. This research investigates the use of this data (length based) by exploring time series analyses of the vehicle counts as freight and non-freight movement.

Utilizing Egocentric Video And Sensors To Conduct Naturalistic Bicycling Studies, Feng Liu, Miguel A. Figliozzi

TREC Final Reports

Existing data collection methods are mostly designed for videos captured by stationary cameras and are not designed to follow cyclists along a route or to integrate other sensor data. The goals of this research are: a) to develop a platform to collect naturalistic video bicycling data, b) to develop a methodology to integrate video data with other sensors that measure cyclists’ position and comfort levels, and c) to apply the platform and data collection methodology to a real-world route. This research effort has successfully integrated video and sensor data to describe cyclists’ comfort levels along a route. It was found …

Graduate-Level Civil Engineering Transportation Course Development – Oregon Tech, Roger Lindgren, David Thaemert, Charles Riley

TREC Final Reports

Three civil engineering professors at the Oregon Institute of Technology (Oregon Tech) undertook a project during the 2014-15 academic year to develop a series of transportation-related graduate courses and to modernize Oregon Tech’s Traffic Engineering Laboratory. Courses were developed in the areas of transportation water resources, transportation structures and traffic engineering. At the completion of this project, Oregon Tech is now capable of increasing the number of students educated in three key civil engineering sub-disciplines that are directly related to transportation. This project, therefore, contributes to all three U.S. Department of Transportation University Transportation Center (UTC) purpose statements: Advance transportation …

Measuring What We Value: Using Performance Measures To Achieve Goals, Chris Rall

PSU Transportation Seminars

Performance measures are commonly used in transportation planning, but how effectively are public agencies using them, and to what ends?

Metro, ODOT and many cities use performance measures to evaluate investment choices and monitor progress. Drawing from Transportation for America’s report Measuring What We Value, and some of the most cutting edge examples of performance-based planning around the nation, Chris' presentation will step back to consider what makes a performance-based planning approach effective at achieving an agency’s goals.

Comparing Mode Shares For Non-Residential Destinations In Urban And Suburban Environments, Tasnia Subrin

Student Research Symposium

To ensure facility for multimodal transportation is one of the most important concerns in today’s transportation sector, with initiatives being taken to make multimodal transportation popular. The built environment variables have a strong relationship with transportation mode choice, but whether that relationship holds true in urban and suburban neighborhoods in the same manner has not been considered. Using data for three non-residential land uses, this research explores whether the built environment variables in suburban areas influences mode share like it does in urban areas. We used survey data conducted at the establishments regarding respondents’ travel characteristics from a previous study, …

Multimodal Transportation Planning Curriculum For Urban Planning Programs, Kristine M. Williams, Tia Claridge, Alexandria Carroll

TREC Final Reports

Integrated multimodal transportation and land use planning is critical to advancing mode choice, public health and safety, and livability objectives. Communities across the U.S. are seeking to redefine their planning process accordingly. In response, university graduate urban planning and engineering programs are beginning to address multimodal planning and sustainable transportation, but most do not yet offer a robust curriculum on these topics. To help address this need, the University of South Florida (USF), Center for Urban Transportation Research (CUTR) developed a curriculum for a course on multimodal transportation planning and its role in advancing livability and related objectives. The course …

Advanced Gis: Smart Transportation, Christopher Bone, Ken Kato, Jacob Bartruff, Marc Schlossberg

TREC Final Reports

As sensors have become cheaper and more common, they have found an increasingly important role in transportation. However, curriculum to prepare students who will be working with these technologies as developers and planners has not developed at the same rate. The goal of this project was to develop a college course focused around sensors and smart transportation to be offered to undergrad and graduate students at the University of Oregon. The class focused on the practical application and the theoretical consequences of these developments. The class was offered in the spring term of 2015 to a group of undergraduate and …

Disseminating The Sustainable City Year Program (Scyp) Education Model, Nico Larco, Marc Schlossberg

TREC Final Reports

The University of Oregon has developed a catalytic learning model that simultaneously meets the needs of both the next generation’s transportation workforce and cities looking for innovative and catalytic ways to advance a new era of transportation goals. Named the Sustainable City Year Program (SCYP), the model links local community priorities (as expressed through local plans and city council goals) with courses from a range of disciplines at a nearby university. The UO program engages 500+ multidisciplinary students annually in providing 60,000+ hours of work to city-identified projects using the existing administrative systems of both universities and local communities.

This …

Webinar: Development Of A Pedestrian Demand Estimation Tool, Kelly Clifton

TREC Webinar Series

Why model pedestrians?

A new predictive tool for estimating pedestrian demand has potential applications for improving walkability. By forecasting the number, location and characteristics of walking trips, this tool allows for policy-sensitive mode shifts away from automobile travel.

There is growing support to improve the quality of the walking environment and make investments to promote pedestrian travel. Despite this interest and need, current forecasting tools, particularly regional travel demand models, often fall short. To address this gap, Oregon Metro and NITC researcher Kelly Clifton worked together to develop this pedestrian demand estimation tool which can allow planners to allocate infrastructure …

Utilizing High Resolution Bus Gps Data To Visualize And Identify Congestion Hot-Spots In Urban, Nicholas B. Stoll, Travis B. Glick, Miguel Figliozzi

Civil and Environmental Engineering Faculty Publications and Presentations

Congestion and travel delay on urban roadways can influence the roadways’ operating costs and service attractiveness. This research used high-resolution bus data to examine sources of delay on urban arterials. A set of tools was created to help visualize trends in bus behavior and movement; these tools allowed larger traffic trends to be visualized along urban corridors and streets. With buses as probes and examining aggregated bus behavior, contoured speed plots were used to understand the behavior of roadways outside the zone of influence of bus stops. Speed plots were used to discover trends and travel patterns with only a …

Do Characteristics Of Walkable Environments Support Bicycling? Toward A Definition Of Bicycle-Supported Development, Christopher D. Muhs, Kelly Clifton

Civil and Environmental Engineering Faculty Publications and Presentations

Does walkability equate with bikeability? Through a comprehensive review of studies of the built environment and bicycling, including mode choice, route choice, safety, and urban design literature, this paper addresses this question. Previous work has raised the issue that the two modes are functionally different, despite them often being combined into a nonmotorized category, and has highlighted research challenges. Existing studies of bikeability have largely focused on infrastructure. This paper contributes to the literature on bicycling and the built environment by providing a thorough review of past research with a focus on the relationships between land use, urban form, and …

The Effects Of Commuter Rail On Population Deconcentration And Commuting: A Salt Lake City Case Study, Joanna Ganning, Mercedes Beaudoin, Simon Brewer, Keuntae Kim, Keunhyun Park

TREC Final Reports

All transportation systems have the ability to transform human settlement patterns, which can affect a range of social, economic and environmental issues. Considering investments in rail infrastructure have increased in recent decades (Bureau of Transportation Statistics, 2007; Israel & Cohen-Blankshtain, 2010), it is important for planners and researchers to understand how these rail systems influence land use, metropolitan development patterns, and population migration. The following paragraphs summarize the studies and their findings.

The Effects of Commuter Rail Establishment on the Relationships between the Built Environment, Travel Behavior, and Residential Self- Selection (RSS): To help regional and transportation planners better understand …