Engineering Commons^™

A Flexible Approach To On-Site Power Filtering And Supply Backup Using High Capacity High Temperature Smes For Maximum Equipment Utility, Dominic Cuiuri, Jeffrey Moscrop, Christopher Cook

Dominic Cuiuri

With power systems subject to an ever-increasing variety of load types, power quality remains of concern to both utilities and consumers alike. Some of the most concerning issues to users of sensitive equipment include voltage sags, supply interruption and current harmonics. This paper describes a comprehensive power quality device that can be designed to compensate for harmonic load currents and mains voltage variations in a system, as well as providing mains failure backup for smaller critical system loads. The design process described integrates high capacity high temperature Superconducting Magnetic Energy Storage (SMES) technology with Active Power Filter (APF) switching technology …

A Flexible Computer-Controlled Experimental Power Source For Welding Research, Dominic Cuiuri, John Norrish, Christopher Cook

Dominic Cuiuri

Control of the Gas Metal Arc welding process is becoming increasingly sophisticated, due to improvements in technology and a better understanding of the process itself. To effectively conduct research in this area, it is necessary to have equipment that is extremely flexible in both architecture and operation. Experimental power sources and a welding test facility have been developed at the University of Wollongong which meet these criteria. The core time-critical control functions are performed by an independent digital signal processor (DSP). Non time-critical functions such as data storage and operator interface are performed by a desktop personal computer. Both computing …

Investigations Of Tandem Gma Welding Using A Flexible Computer Controlled Power Source System, Ruham Reis, John Norrish, Dominic Cuiuri, Alexander Nicholson

Dominic Cuiuri

No abstract provided.

A Flexible Control Program For Research And Development In Tandem Gma Welding, Ruham Reis, John Norrish, Dominic Cuiuri, Alexander Nicholson

Dominic Cuiuri

No abstract provided.

Mechanical Properties Of Laser-Sintered-Nylon Diamond Lattices, Clayton Neff

USF Tampa Graduate Theses and Dissertations

Additive manufacturing offers a manufacturing technique to produce complex geometry prototypes at a rapid pace and low cost. These advantages advocate additive manufacturing for the design and production of cellular structures. Cellular structures are interesting because they contain a large amount of porosity (void space of air) to manifest a lightweight structure. Designs of cellular structures generate a periodic pattern; often of complex geometry, called a lattice.

There has been a significant amount of research to maximize specific stiffness of lattice structures but little to evaluate low-stiffness lattices. Low-stiffness structures benefit energy absorbance through bending of the lattice. This research …

Flexible Free-Standing Graphene Paper With Interconnected Porous Structure For Energy Storage, Kewei Shu, Caiyun Wang, Sha Li, Chen Zhao, Yang Yang, Hua-Kun Liu, Gordon G. Wallace

Australian Institute for Innovative Materials - Papers

A novel porous graphene paper is prepared via freeze drying a wet graphene oxide gel, followed by thermal and chemical reduction. The macroscopic structure of the formed graphene paper can be tuned by the water content in the gel precursor. With 92% water content, an interconnected macroporous network can be formed. This porous graphene (PG) paper exhibits excellent electrochemical properties. It can deliver a high discharge capacity of 420 mA h g⁻¹ at a current density of 2000 mA g⁻¹ when used as binder-free lithium ion battery anode. PG paper exhibits a specific capacitance of 137 F g …

A Bi-Layer Tio2 Photoanode For Highly Durable, Flexible Dye-Sensitized Solar Cells, Jianjian Lin, Yong Peng, Alexander Pascoe, Fuzhi Huang, Yi-Bing Cheng, Yoon-Uk Heo, Andrew Nattestad, Wanchul Seung, Sung Kyun Kim, Hoon Joon Yoon, Sang Woo Kim, Yusuke Yamauchi, S X. Dou, Jung Ho Kim

Australian Institute for Innovative Materials - Papers

Low-temperature processing of dye-sensitized solar cells (DSCs) [B. Oregan, M. Grätzel, Nature, 1991, 353, 737] is crucial to enable their commercialization with low-cost plastic substrates. Much of the previous work in this area has focused on mechanical compression of premade particles on plastic substrates; however, many reported that this technique did not yield sufficient interconnections for high charge carrier transport. Herein, we present bi-layer photoanodes that incorporate microstructured TiO₂ sea-urchin-like assemblies, composed of high-aspect-ratio single crystalline nanoribbons, i.e., two-dimensional subunits, which were deposited onto a nanoparticle layer (commercial P25), with a 5.6% conversion efficiency realized. We demonstrate that …

A Stochastic And Flexible Activity Based Model For Large Population Application To Belgium, Johan Barthelemy, Philippe L. Toint

SMART Infrastructure Facility - Papers

The VirtualBelgium project aims at developing an understanding of the evolution of the Belgian population using agent-based simulations and considering various aspects of this evolution such as demographics, residential choices, activity patterns, mobility, etc. This simulation is based on a validated synthetic population consisting of approximately 10,000,000 individuals and 4,350,000 households located in the 589 municipalities of Belgium. The work presented in this paper focuses only on the mobility behaviour of such large populations and this is simulated using an activity-based approach in which the travel demand is derived from the activities performed by the individuals. The proposed model is …

Effect Of Mesh On Springback In 3d Finite Element Analysis Of Flexible Microrolling, Feijun Qu, Zhengyi Jiang, Haina Lu

Faculty of Engineering and Information Sciences - Papers: Part A

In flexible microrolling, springback in thickness direction is a critical indicator to determine the forming quality. Accurate prediction of springback is one of the significant aspects in the finite element analysis of flexible microrolling. Meshing is a step of great importance in finite element analysis of manufacturing process as it directly determines the accuracy of the FEA results as well as the requested computational time. This paper presents a numerical study on revealing the mesh effects on the accuracy of springback estimation utilising ABAQUS/Standard for modelling and analyses. Two types of meshes with six mesh sizes for each mesh type …

Soft, Flexible Micromanipulators Comprising Polypyrrole Trilayer Microactuators, Alexandre Khaldi, Ali Maziz, Gursel Alici, Geoffrey M. Spinks, Edwin W. Jager

Faculty of Engineering and Information Sciences - Papers: Part A

Within the areas of cell biology, biomedicine and minimal invasive surgery, there is a need for soft, flexible and dextrous biocompatible manipulators for handling biological objects, such as single cells and tissues. Present day technologies are based on simple suction using micropipettes for grasping objects. The micropipettes lack the possibility of accurate force control, nor are they soft and compliant and may thus cause damage to the cells or tissue. Other micromanipulators use conventional electric motors however the further miniaturization of electrical motors and their associated gear boxes and/or push/pull wires has reached its limits. Therefore there is an urgent …

Flexible Electrodes And Electrolytes For Energy Storage, Caiyun Wang, Gordon G. Wallace

Australian Institute for Innovative Materials - Papers

The advent of flexible, wearable electronics has placed new demands on energy storage systems. The demands for high energy density achieved through the use of highly conducting materials with high surface area that enable facile electrochemical processes must now be coupled with the need for robustness and flexibility in each of the components: electrodes and electrolytes. This perspective provides an overview of materials and fabrication protocols used to produce flexible electrodes and electrolytes. We also discuss the key challenges in the development of high performance flexible energy storage devices. Only selected references are used to illustrate the myriad of developments …

Soft, Flexible Freestanding Neural Stimulation And Recording Electrodes Fabricated From Reduced Graphene Oxide, Nicholas V. Apollo, Matias I. Maturana, Wei Tong, David A. X Nayagam, Mohit N. Shivdasani, Javad Foroughi, Gordon G. Wallace, Steven Prawer, Michael R. Ibbotson, David J. Garrett

Australian Institute for Innovative Materials - Papers

There is an urgent need for conductive neural interfacing materials that exhibit mechanically compliant properties, while also retaining high strength and durability under physiological conditions. Currently, implantable electrode systems designed to stimulate and record neural activity are composed of rigid materials such as crystalline silicon and noble metals. While these materials are strong and chemically stable, their intrinsic stiffness and density induce glial scarring and eventual loss of electrode function in vivo. Conductive composites, such as polymers and hydrogels, have excellent electrochemical and mechanical properties, but are electrodeposited onto rigid and dense metallic substrates. In the work described here, strong …

High-Performance Flexible All-Solid-State Supercapacitor From Large Free-Standing Graphene-Pedot/Pss Films, Yuqing Liu, Bo Weng, Joselito M. Razal, Qun Xu, Chen Zhao, Yuyang Hou, Shayan Seyedin, Rouhollah Jalili, Gordon G. Wallace, Jun Chen

Australian Institute for Innovative Materials - Papers

Although great attention has been paid to wearable electronic devices in recent years, flexible lightweight batteries or supercapacitors with high performance are still not readily available due to the limitations of the flexible electrode inventory. In this work, highly flexible, bendable and conductive rGO-PEDOT/PSS films were prepared using a simple bar-coating method. The assembled device using rGO-PEDOT/PSS electrode could be bent and rolled up without any decrease in electrochemical performance. A relatively high areal capacitance of 448 mF cm-2 was achieved at a scan rate of 10 mV s-1 using the composite electrode with a high mass loading (8.49 mg …