Engineering Commons^™

Targeted Products From Fast-Hydropyrolysis And Hydrodeoxygenation Of Biomass, Ian Tad Smith

Open Access Theses

Previously, the H2Bioil process was proposed as a possible way to convert sustainably available intact biomass into liquid fuels. The optimization of this process and possible synergies with other biomass conversion processes are presented in this thesis.

The selectivity of the PtMo hydrodeoxygenation catalyst was tuned using two different hydrogen partial pressures: 25 bar, and 2.5 bar. This effect was studied on cellulose and intact biomass samples to determine the effect that hydrogen has upon the retention of aromatic compounds found in intact biomass. These experiments show that it is possible for the hydrogenation activity of the PtMo catalyst to …

Dynamic Triaxial Compression Experiments On Borosilicate And Soda-Lime Glass, John T. Chojnacki

Open Access Theses

A series of compression experiments were performed on borosilicate and soda-lime glass using a triaxial compression Kolsky bar. The triaxial compression Kolsky bar differs from a traditional Kolsky bar by having two pressure chambers, one enclosing the specimen and the other enclosing the end of the transmission bar, so that a specimen may be pre-stressed axially and radially before a dynamic axial load is applied. The result is a modified Kolsky bar capable of measuring axial deformation and axial stresses of a specimen at various strain rates under a range of confinement pressures. Borosilicate glass was subjected to triaxial confinement …

Loss Of Accuracy Using Smeared Properties In Composite Beam Modeling, Ning Liu

Open Access Theses

Advanced composite materials have broad, proven applications in many engineering systems ranging from sports equipment sectors to components on the space shuttle because of their lightweight characteristics and significantly high stiffness. Together with this merit of composite materials is the challenge of improving computational simulation process for composites analysis. Composite structures, particularly composite laminates, usually consist of many layers with different lay-up angles. The anisotropic and heterogeneous features render 3D finite element analysis (FEA) computationally expensive in terms of the computational time and the computing power. ^ At the constituent level, composite materials are heterogeneous. But quite often one homogenizes …

Synthesis And Characterization Of A Lubricin Mimic (Mlub) To Reduce Friction On The Articular Cartilage Surface, Alexandra May Lawrence

Open Access Theses

The lubricating proteoglycan, lubricin, facilitates the remarkable low friction and wear properties of articular cartilage in the synovial joints of the body. Lubricin lines the joint surfaces and plays a protective role as a boundary lubricant in sliding contact; down-regulation of lubricin is associated with cartilage degradation and the pathogenesis of osteoarthritis. An unmet need for early osteoarthritis treatment is the development of therapeutic molecules that mimic lubricin function and yet are also resistant to enzymatic degradation common in the damaged joint. Here, we engineered a lubricin mimic (mLub) that resists enzymatic degradation and binds to the articular surface to …

A Nearly Autonomous, Platform-Independent Mobile App For Manure Application Records, Matthew R. Koester

Open Access Theses

A major part of modern manure management is accurate application records; a key to their creation and maintenance is ease. This project involved the integration of existing technologies (smartphones, Bluetooth tags) in mobile web and native Android applications (apps) which enable the autogenic creation and upkeep of manure hauling records. This approach greatly improves the efficiency of the recording process which should help to improve the management of applied nutrients. Features of the app include: computation of a suggested travel speed to ensure target nutrient application (based on desired application rate and spreading width); minimized keystrokes/screen taps to accurately capture …

An Empirical Approach To The Re-Creation Of Vehicle Drive Cycles, Andrew J. Larson

Open Access Theses

Vehicles such as buses, delivery trucks, mining equipment, and motorsport vehicles often repeat a highly defined pattern, route, or track during normal use. For these vehicles, standard dynamometer drive cycles are of little use. It was proposed that deriving a vehicle drive cycle from empirical data collected from on-board vehicle sensors would produce more accurate vehicle characteristic predictions for special purpose vehicles. This study answers the question "Is it possible to use recorded vehicle data to replicate a real world driving scenario for the purpose of vehicle diagnostics?" To reduce the complexity of the project, an electric go-kart was used …

Hybrid Power System For Micro Air Vehicles, Bakytgul Khaday

Open Access Theses

Today Micro Air Vehicles are in need of a good power source that would enable them longer flight time and various functionalities. This work is focused on to this problem. A possible solution that is offered in this study is implementing a hybrid power system consisting of battery and supercapacitor (SCAP). The proposed hybrid power system was tested on an existing MAV platform (Cheerson CX-10). A separate hybrid power printed circuit board (PCB) was designed and manufactured. For experimental and system verification purposes, the PCB was not sized for on-board flight. The hybrid power PCB was connected to MAV through …

Four Runway Configuration Types And Their Relation To Arrival Delays, Rachel Jayne Kennedy

Open Access Theses

Aside from a safe flight, airline passengers expect to arrive to their destination on time. With an abundance of flights in the United States arriving late each day, it has yet to be determined if the airport's layout plays a role. This research looks at four common runway configuration types at hub and non-hub airports to determine if runway configurations affect arrival delays. A two-way ANOVA is conducted comparing the means of the on-time arrival percentage between airports exhibiting each of the four runway configurations as well as hub and non-hub airport status. The results determine if any or none …

Cerebrovascular Reactivity Alterations Due To Subconcussive Repetitive Head Trauma In Asymptomatic High School Football Players, Chetas Joshi

Open Access Theses

Chronic neurological damage as a result of chronic repetitive head trauma is a major concern for football athletes today. Repetitive concussions have been linked to many neurological disorders. Recently, it has been reported that repetitive subconcussive events can contribute to long-term neurodegeneration. For these reasons, it is important to understand the effect repetitive subconcussive head trauma has on brain health in young athletes. Past research has demonstrated that cerebrovascular reactivity (CVR), an important mediator of cerebrovascular regulation, is impaired following mild traumatic brain injury (mTBI). This impairment increases susceptibility to secondary injury following mTBI. In this study, Breath-Hold (BH) task …

Computational Valve Plate Design, Paul K. Kalbfleisch

Open Access Theses

Axial piston machines are widely used in many industries for their designs compactness, flexibility in power transfer, variable flow rate, and high efficiencies as compared to their manufacturing costs. One important component of all axial piston machines that is a very influential on the performance of the unit is the valve plate. The aim of this research is to develop a design methodology that is general enough to design all types of valve plates and the simple enough not to require advanced technical knowledge from the user. A new style of valve plate designs has been developed that comprehensively considers …

Hubcheck: Check The Hub, Derrick S. Kearney

Open Access Theses

The HUBzero Platform is a framework for building websites, referred to as "hubs," that promote research communities through online simulation, data management, and collaboration. With each software release, the HUBzero Team dedicates weeks of team members' time toward manually testing, fixing, and retesting hub components. The unique mixture of environments that make up a hub makes using existing automated testing solutions hard and shifts the burden of testing to humans, promoting variation, spot checking of fixes, and other shortcuts to avoid the high cost of completely retesting the system. With over twenty hubs being actively managed by the HUBzero Team, …

Using Mixtures Of Fatty Acid Methyl Esters As Phase Change Materials For Concrete, Leah Christine Liston

Open Access Theses

Phase change materials (PCMs) are an effective way of storing/releasing thermal energy via phase transformations. Incorporating PCMs into concrete pavements at airports has been suggested as a means to reduce the accumulation of snow and ice on runways. This thesis reports on the development of two phase change materials composed of binary mixtures of fatty acid methyl esters (FAME) which provide a solid-liquid transition slightly above 0°C with a high enthalpy of fusion. Current findings of this study indicate that these mixtures have the necessary properties to be a high performance PCM with the potential to reduce the levels of …

Optimal Start-Up Control Of An Evaporation System Modeled As An Interconnected Hybrid Dynamical System, Rithesh Iyer

Open Access Theses

The purpose of this research is to investigate the feasibility and advantageous outcomes of modeling a complicated non-linear hybrid dynamical process as an interconnected dynamical system for the purpose of solving a hybrid optimal control problem under the framework of nonlinear model predictive control. This work considers a hybrid model of the startup process of an evaporation system. In this evaporation system a liquid containing mixture of a non-volatile component A and volatile solvents B (water) and C (alcohol) is heated to evaporate the solvents and obtain component A at a higher concentration using a column that is temperature controlled …

Diagnosis Of Systematic Defects Based On Design-For-Manufacturability Guidelines, Dhawal Krishana Gupta

Open Access Theses

All products in the Very-Large-Scale-Integrated-Circuit (VLSIC) industry go through three major stages of production - Design, Verification and Manufacturing. Unfortunately, neither of these stages are truly perfect, hence we need two more sub-stages of manufacturing, namely Testing and Defect Diagnosis to prevent imperfections in ICs. Testing is used to generate test vectors to validate the functionality of the Device-under-Test (DUT), and Defect Diagnosis is the process of identifying the root-cause of a failing chip, i.e., the location and nature of defect. Systematic defects are unintended structural and material changes at specific locations with a higher probability of failure due to …

Mass Transfer Of Large Molecules Through Collagen And Collagen-Silica Hybrid Membranes, Pedro Jofre Lora

Open Access Theses

Diabetes is a growing concern in the United States and around the world that must be addressed through new treatment options. Current standard treatment options of diabetes are limiting and have tremendous impacts on patient's lives. Emerging therapies, such as the implantation of encapsulated islets, are promising treatment options, but have not yet materialized due to unsolved problems with material properties. Hybrid silica-collagen membranes address some of these unsolved problems and are a promising material for cell encapsulation. However, the mass transfer properties of large molecules, such as insulin, TNF-α, IL1β, and other important proteins in the etiology of diabetes, …

Downward Model Development Of The Soil Moisture Accounting Loss Method In Hec-Hms: Revelations Concerning The Soil Profile, Jessica Holberg

Open Access Theses

Despite the fact that the soil profile is known to impact streamflow, most Curve Number (CN)-based models ignore subsurface processes. This study explores the influence of soil storage on peak flows. Two watersheds in flat, humid west-central Indiana were modeled using both the Natural Resources Conservation Service (NRCS) Curve Number and four versions of the Soil Moisture Accounting (SMA) loss methods in the United States Army Core of Engineers-developed (USACE) Hydrologic Engineering Center Hydrologic Modeling System (HEC-HMS). One watershed encompasses the Wabash and Tippecanoe Rivers' confluence; the other contains an ephemeral stream, Plum Creek. The CN-based model was developed using …

Kernel And Bulk Density Changes Due To Moisture Content, Mechanical Damage, And Insect Damage, Danping Guo

Open Access Theses

Corn (Zea Mays), is one of the major grain crops in the world and moisture content, mechanical damage and insect damage are three factors that affect its quality. The primary goal of this thesis was to investigate the effects of moisture content, mechanical damage and insect damage on kernel and bulk density of corn. The study was conducted using two corn hybrids, Pioneer 1352 and Pioneer 1221, that were grown on Purdue Agronomy Farm for Research and Education (ACRE), manually picked and shelled. In Objective 1, the effect of three different moisture conditioning processes (drying from harvest moisture, …

Trajectory Generation For Lane-Change Maneuver Of Autonomous Vehicles, Ashesh Goswami

Open Access Theses

Lane-change maneuver is one of the most thoroughly investigated automatic driving operations that can be used by an autonomous self-driving vehicle as a primitive for performing more complex operations like merging, entering/exiting highways or overtaking another vehicle. This thesis focuses on two coherent problems that are associated with the trajectory generation for lane-change maneuvers of autonomous vehicles in a highway scenario: (i) an effective velocity estimation of neighboring vehicles under different road scenarios involving linear and curvilinear motion of the vehicles, and (ii) trajectory generation based on the estimated velocities of neighboring vehicles for safe operation of self-driving cars during …

Comprehensively Simulating The Mixed-Mode Progressive Delamination In Composite Laminates, Zhenyuan Gao

Open Access Theses

Delamination, or interlaminar debonding, is a commonly observed failure mechanism in composite laminates. It is of great significance to comprehensively simulate the mixed-mode progressive delamination in composite structures because by doing this, people can save a lot of effort in evaluating the safe load which a composite structure can endure.^ The objective of this thesis is to develop a numerical approach to simulating double-cantilever beam (DCB) and mixed-mode bending (MMB) tests and also of specifying/validating various cohesive models. A finite element framework, which consists of properly selecting time integration scheme (explicit dynamic), viscosity, load rate and mass scaling, is developed …

Characterization Of Wake Effects And Loading Status Of Wind Turbine Arrays Under Different Inflow Conditions, Xiangyu Gao

Open Access Theses

The objective of the present work is to improve the accuracy of Actuator Line Modeling (ALM) in predicting the unsteady aerodynamic loadings on turbine blades and turbine wake by assessing different methods used to determine the relative velocity between the rotating blades and wind. ALM is incorporated into a Large Eddy Simulation (LES) solver in OpenFOAM (Open Field Operations and Manipulations). The aerodynamic loadings are validated by experiment results from National Renewable Energy Laboratory (NREL). Turbine wakes are validated by predictions of large eddy simulation using exact 3D blade geometries from a two-blade NREL Phase VI turbine. Three different relative …

Drop Volume Modulation Via Modulated Contact Angle In Inkject Systems, Aaron Fulton

Open Access Theses

To date, there are limited options in the ability to adjust feature sizes when inkjet printing. The reduction of nozzle size has been the primary method by which smaller features are created. Prior attempts to reduce feature sizes have all come with some restriction or another, as they are only accessible on certain systems, are difficult to manufacture, tune, cause clogging, etc. Few attempts to create droplets of smaller radii than that of the nozzle from which they are produced have been successful. Additionally, many fluids cannot be jetted whatsoever. Existing methods pertain largely to piezoelectric inkjet printing and time …

Bayesian Global Optimization Approach To The Oil Well Placement Problem With Quantified Uncertainties, Zengyi Dou

Open Access Theses

The oil well placement problem is vital part of secondary oil production. Since the calculation of the net present value (NPV) of an investment depends on the solution of expensive partial differential equations that require tremendous computational resources, traditional methods are doomed to fail. The problem becomes exceedingly more difficult when we take into account the uncertainties in the oil price as well as in the ground permeability. In this study, we formulate the oil well placement problem as a global optimization problem that depends on the output of a finite volume solver for the two-phase immiscible flow (water-oil). Then, …

Characterization And Evaluation Of Head Impact Sensors And Varsity Football Helmets, Brian R. Cummiskey

Open Access Theses

An increased understanding of the effects of brain injury in recent years has led to greater attention being given to the topic. A desire to investigate the causal agents of these injuries in athletes has led to the development and use of several devices that track head impacts as well as improving helmet technology to protect players from said impacts. In order to determine which devices are able to best measure head impacts, a Hybrid III headform was used to quantify the accuracy for translational and angular accelerations. Testing was performed by means of administering impacts to a helmet on …

Conflict And Error Management: A Case In The Furniture Industry, Glenn Candranegara

Open Access Theses

The purpose of this study is to investigate and provide tools for the furniture industry, for detecting and preventing damage from propagating errors. Many of the errors cascading in a furniture manufacturing facility are typically detected only after the original process that causes the error had already caused errors. Previous research has developed and validated theoretical methods, such as CEPD, to prevent and detect errors and conflicts. This thesis is the first effort to implement the logic of CEPD in the furniture industry. There are four relevant measures that are analyzed and improved in this thesis; they are preventability, reliability, …

Modeling And Analysis Of A Resonant Nanosystem, Scott L. Calvert

Open Access Theses

The majority of investigations into nanoelectromechanical resonators focus on a single area of the resonator's function. This focus varies from the development of a model for a beam's vibration, to the modeling of electrostatic forces, to a qualitative explanation of experimentally-obtained currents. Despite these efforts, there remains a gap between these works, and the level of sophistication needed to truly design nanoresonant systems for efficient commercial use. Towards this end, a comprehensive system model for both a nanobeam resonator and its related experimental setup is proposed. Furthermore, a simulation arrangement is suggested as a method for facilitating the study of …

Performance Analysis Of Vortex Based Mixers For Confined Flows, Timo Buschhagen

Open Access Theses

The hybrid rocket is still sparsely employed within major space or defense projects due to their relatively poor combustion efficiency and low fuel grain regression rate. Although hybrid rockets can claim advantages in safety, environmental and performance aspects against established solid and liquid propellant systems, the boundary layer combustion process and the diffusion based mixing within a hybrid rocket grain port leaves the core flow unmixed and limits the system performance. One principle used to enhance the mixing of gaseous flows is to induce streamwise vorticity. The counter-rotating vortex pair (CVP) mixer utilizes this principle and introduces two vortices into …

Characterization Of Vectorization Strategies For Recursive Algorithms, Shruthi Balakrishna

Open Access Theses

A successful architectural trend in parallelism is the emphasis on data parallelism with SIMD hardware. Since SIMD extensions on commodity processors tend to require relatively little extra hardware, executing a SIMD instruction is essentially free from a power perspective, making vector computation an attractive target for parallelism. SIMD instructions are designed to accelerate the performance of applications such as motion video, real-time physics and graphics. Such applications perform repetitive operations on large arrays of numbers. While the key idea is to parallelize significant portions of data that get operated by several sequential instructions into a single instruction, not every application …

High Density Collagen Fibril Constructs With Tunable Mechano-Biology In Acellular And Cellular Configurations, Kevin Blum

Open Access Theses

Collagen has long been used as a material for tissue engineering due to its prevalence in the extracellular matrix of connective tissues. However, traditional collagen materials utilizing atelocollagen and acid solubilized telocollagen have lacked the mechanical integrity and collagen fibril density found in the in vivo state. Here, we utilize collagen oligomers and confined compression to forcibly remove a portion of the fluid phase component. Materials were created with controlled, substantially increased material properties, including order of magnitude increases in collagen fibril density, elastic modulus, compressive modulus,and resistance to proteolytic degradation. The technique was found to be amenable to cell …

Numerical Characterization Of Convective Heat Transfer Of Low-Rise Buildings, Ranchi Chen

Open Access Theses

The convective heat transfer coefficient (CHTC) is an important parameter to evaluate the efficiency of building-integrated photovoltaic/Thermal (PV/T) system and the energy exchange within the turbulent atmospheric boundary layer. Reynolds-average Navier-Stokes approach has been frequently used to predict the CHTC at the surface of low rise roof but incapable of predicting transient behavior of separation, reattachment and recirculation both on the windward and leeward surface. However, Large Eddy Simulation approach (LES) could provide accurate flow field and temperature field around the low rise building. ^ The current study uses Large Eddy Simulation with Smagorinsky-Lily model and the Shear Stress Transport …

The Effects Of An Electric Field On The Sintering Of Ceramics, Kara E. Luitjohan

Open Access Theses

Sintering is a method used to condense a solid powder material into a single solid mass allowing for the production of metal or ceramic parts. Different sintering techniques involve the manipulation of different processing variables. To fully exploit the processing variables, how they affect the sintering process must be fully understood. One such processing variable is an applied electric field, utilized in spark plasma sintering and flash sintering. Both techniques allow for densification to occur at lower temperatures and in shorter times when compared to other sintering techniques. Though various theories exist in literature for how the electric field affects …