Engineering Commons^™

Design, Fabrication, And Testing Of A 3d Printer Based Microfluidic System, Carlton A. Mcmullen

Graduate Theses and Dissertations

A pneumatically actuated PDMS based microfluidic devices were designed and fabricated by soft-lithography. Two types of molds were fabricated out of different material for this experiment. The first mold, (device 1), was fabricated from a sheet of Polymethyl methacrylate (PMMA) material, similar to Plexiglas. The device features were micro-engraved onto the face of the material. The second mold, (device 2), was fabricated from the use of fused deposition modeling (FDM) 3D printing. The pumping efficiency of the PDMS devices was analyzed through the characterization of the micro-pumps flowrate with respect to the pumps driving pressure and the actuation frequency. Tested …

Development Of A Design Tool For Biologically Inspired Fault Adaptive Design By Strategy Mapping, Nicholas Steven Huisman

Graduate Theses and Dissertations

A design tool for Biologically Inspired Fault Adaption that utilizes the concept of strategy mapping was developed and the development process and testing is presented in this paper. The concept of strategy mapping is derived primarily from the field of military theory and supposes that for any given specific problem, that there exists a specific solution for, a single strategy can be identified for that solution/problem combination. This strategy, when applied to the specific problem yields the specific solution. This specific solution is referred to as the “tactics” of the strategy. The strategy can also be directly applied to a …

The Aerodynamic And Dynamic Loading Of A Slender Structure By An Impacting Tornado-Like Vortex: The Influence Of Relative Vortex-To-Structure Size On Structural Loading, Matthew Nicholas Strasser

Graduate Theses and Dissertations

Structural loading produced by an impacting vortex is a hazardous phenomenon that is encountered in numerous applications ranging from the destruction of residences by tornados to the chopping of tip vortices by rotors. Adequate design of structures to resist vortex-induced structural loading necessitates study of the phenomenon that control the structural loading produced by an impacting vortex. This body of work extends the current knowledge base of vortex-structure interaction by evaluating the influence of the relative vortex-to-structure size on the structural loading that the vortex produces. A computer model is utilized to directly simulate the two-dimensional impact of an impinging …

Development Of Pre-Stressed Cfrp Fatigue Retrofits For Common Steel Bridge Connections, Korey Albert Pough

Graduate Theses and Dissertations

Aging or deterioration of the nation’s bridge infrastructure is a significant issue that requires attention. Causes for much of this deterioration can be attributed to two main factors, 1) corrosion, and 2) metallic fatigue, both of which work together to reduce the strength and serviceability of bridge components over time. In many instances, strengthening of bridge components using localized retrofits offers an economical and fast solution for increasing the longevity of existing steel bridges; however, such retrofits must be resilient to further corrosion and fatigue damage. In this study, a localized retrofit is developed using pre-stressed Carbon Fiber Reinforced Polymer …

Investigation Of A Numerical Algorithm For A Discretized Rubber-Belt Continuously Variable Transmission Dynamic Model And Techniques For The Measurement Of Belt Material Properties., Brian Gene Ballew

Graduate Theses and Dissertations

A numerical algorithm for modeling the dynamic response of a rubber-belt Continuously Variable Transmission (CVT) belt is recreated. The numerical attributes applied to the algorithm and difficulties with numerical stability are discussed in detail. The degrees of freedom of the system have been expanded to include the dynamics of the engine torque output and vehicle loads such as rolling resistance and aerodynamic drag. This was done to emphasize the use of the model as an analysis tool for simulating CVT/engine/vehicle response. The increased degrees of freedom require the addition of a linear dampening element between belt nodes to dampen resonance …

Application Of Polyacrylamide-Based Floc Logs For Turbidity Control At Highway Construction Sites, Kien Ngo

Graduate Theses and Dissertations

Runoff waters generated on highway construction sites can have turbidities in excess of the proposed EPA regulatory standard of 280 NTU due to large areas of exposed soil. The objective of this research was to develop best management practices (BMPs) for the use of anionic polyacrylamide (PAM) based Floc Logs, for turbidity control. Five commercially available types of PAM-based Floc Logs were evaluated in jar tests, using soil excavated from Cato Springs Research Center (CSRC, Fayetteville AR) and six types of clay from the Clay Minerals Society (Chantilly, VA). These results show that no single Floc Log type was suitable …

Investigation Of The Inherent Chemical, Structural, And Mechanical Attributes Of Bio-Engineered Composites Found In Nature: Alligator Gar’S Exoskeleton Fish Scales, Wayne Derald Hodo

Graduate Theses and Dissertations

The U.S. Army has determined a huge cost savings of up to 51% can be accomplished by reducing the gross vehicle weight, for their personnel carrier, by 33%. To cut cost, composite materials are needed. Man-made composites can have superior material properties (high-strength, high-fracture toughness, and lightweight), but they are prone to delamination at the glued-layered interface. In contrast, fish scale is a natural composite that has the same material properties and, additionally, tend not to delaminate.

The focus of this study was to learn how nature integrates hard and soft materials at each length scale to form a layered …

Storage Of Round And Square Switchgrass Bales: Effect Of Storage Time And Fungal Inoculation On Saccharification Efficiency, Noaa Frederick

Graduate Theses and Dissertations

To produce fermentable sugars from lignocellulosic biomass feedstock, severe pretreatment conditions are needed (either high acid concentration, temperature, or retention times). High severities can produce toxic byproducts which inhibit enzymatic hydrolysis or fermentation. In order to reduce pretreatment severities (and thus increase enzyme and fermentation efficiency), the white-rot fungus Pleurotus ostreastus was seeded into square and round bales of Kanlow switchgrass (Panicum virgastum L.) and left in the field over a period of 9 month. The laccase producing fungus is believed to selectively degrade lignin, a common plant structural polymer, which can function as an enzymatic inhibitor. Samples were taken …

Eicosapentaenoic Acid (Epa) From Porphyridium Cruentum: Increasing Growth And Productivity Of The Microalgae For Pharmaceutical Products, Maryam Asgharpour

Graduate Theses and Dissertations

One of the major nutritional requirements in our diet is an adequate intake of omega-3 specially eicosapentaenoic acid (EPA). In the present study, the effects of two temperatures (16°C & 20˚C) and light intensities (140 & 180µE/M2.S) and four nitrate levels (0.075, 0.3, 0.5 and 0.7g/L) on the cell growth and lipid productivity of Porphyridium cruentum, one of the most promising oil-rich species of microalgae, were investigated. A growth comparison was carried out using pure CO2 and 5% CO2/air. Additionally, the ratio of the fatty acids with omega-3 and omega-6 groups at various growth conditions were compared, since an appropriate …

High Temperature Silicon Carbide Mixed-Signal Circuits For Integrated Control And Data Acquisition, Ashfaqur Rahman

Graduate Theses and Dissertations

Wide bandgap semiconductor materials such as gallium nitride (GaN) and silicon carbide have grown in popularity as a substrate for power devices for high temperature and high voltage applications over the last two decades. Recent research has been focused on the design of integrated circuits for protection and control in these wide bandgap materials. The ICs developed in SiC and GaN can not only complement the power devices in high voltage and high frequency applications, but can also be used for standalone high temperature control and data acquisition circuitry.

This dissertation work aims to explore the possibilities in high temperature …

Modulation Of Valve Interstitial Cell Function Through Cell Shape And Phenotype, Atefeh Razavi

Graduate Theses and Dissertations

The aortic valve is a highly dynamic structure responding to actively to the chemical, mechanical and physical cues of the valve microenvironment. Valve interstitial cells are dispersed throughout the valve tissue and play an important role in maintaining the integrity and optimum function of the valve. They are a heterogeneous population composed of various phenotype. These phenotypes have specific functions characteristic of valve physiological and pathological conditions. The effect of mechanical loading and chemical modulators on the behavior of the valve interstitial cells have largely been studied. However the role of valve interstitial cell shape as an intrinsic physical cue …

Wireless Monitoring Of Driver's Pulse Rate And Temperature Using Hand Gloves Approach, Rohith Reddy Narala

Graduate Theses and Dissertations

There is growing concern about dangers correlated with driving, for people with known cardiovascular diseases. However, the association between having a chronic cardiovascular disease and being involved in a motor vehicle crash remains controversial. This study aims to monitor people with known medical emergencies or other medical conditions while driving [1]. It also helps the co-passengers to be cautious while the person is driving with an abnormal health condition. Designed it to be convenient and also can be easily adaptable by the end user.

The proposed project focuses on a wearable sensor glove that equipped with a pulse rate sensor, …

Field Amplified Sample Stacking On Amyloid Beta (1-42) Oligomers Using Capillary Electrophoresis, Sadia Ali Paracha

Graduate Theses and Dissertations

According to recent literature, it is believed that the oligomeric form of amyloid beta (Aβ) is the leading cause of Alzheimer’s disease (1; 8; 10; 12-18). Additionally, recent studies have eluded to the impact of Alzheimer’s disease (AD) both economically and Socially in today’s society where an increase of about 71% of AD related deaths were recorded between 2000 and 2013 (7). Since the oligomeric forms of Aβ vary in size, shape and some believe conformation, it is vital to utilize a separation technique, such as capilllary electrophoresis (CE) to further understand Aβ aggregation. By understanding Aβ aggregation, treatment of …

8 Bit Split Array Based Charge Scaling Digital To Analog Converter With Rail To Rail Buffered Output, Sai Kiran Akula

Graduate Theses and Dissertations

This thesis presents the design, simulation and layout of a silicon carbide (SiC) 8 bit split array charge scaling digital to analog convertor (DAC). The converter consists of the charge scaling capacitor chain with two operational trans-conductance amplifiers (op amp) in voltage follower configuration. The op amps used in the design have the input common mode ranges of 0 to 11.2 V and 4.7V to 14.5V respectively. Additional logic circuit topologies are designed, which help to switch the op amps when needed to provide a rail to rail unity gain at the output. As the design is based on the …

Effects Of Magnetically Induced Micro-Mixing On Nanofiltration Performance, Guanghui Song

Graduate Theses and Dissertations

Nanofiltration (NF) is a relatively new membrane separation process mainly used for removing low molecular weight species from aqueous and non-aqueous solutions. NF membranes suffer from concentration polarization leading to membrane fouling thus compromised membrane performance. Magnetically responsive nanofiltration (NF) membranes functionalized with superparamagnetic nanoparticles (SPNs) attached to the chain ends of grafted polymer nanolayers have been shown to be effective in breaking concentration polarization at the membrane-liquid interface under an appropriate external oscillating magnetic field. Under an oscillating magnetic field, the movement of the polymer chains acts as micro-mixer leading to the suppression of concentration polarization and improved filtration …

Modified Polysulfone Nanofiltration Membrane Synthesis For Hydraulic Fracturing Water Recycle, Blake Alexander Johnson

Graduate Theses and Dissertations

The use of hydraulic fracturing has resulted in significant increases in the yield of oil and natural gas, as water pumped into wells at high pressure cracks the formations and releases the hydrocarbons that are locked in the rocks. This process has created large volumes of brackish water that is very difficult to process and is often disposed of into injection wells. Suspended solids and some dissolved solids are more readily removed, but the multivalent ions found in certain salts can precipitate in a well and complicate the reuse of flowback in future hydraulic fracturing operations.

Nanofiltration, a membrane separation …

Production Of Ethanol From Cereal Food Fines Using Dilute-Acid Hydrolysis, Andrew Edward Arnett

Graduate Theses and Dissertations

Cereal food fines are a leftover by-product from breakfast cereal processing that is typically sold as animal feed or used as a pet food ingredient; however this product could be of greater value as a feedstock for the production of fuel ethanol via fermentation. In order for this material to be fermented it has to be broken down in to simple sugars using hydrolysis. One method of hydrolysis is called dilute-acid hydrolysis, whereby low concentrations of acid are added to the feedstock to facilitate the breaking of chemical bonds. This study investigates the effect of different concentrations of acid to …

College Football Rankings: Maximum Flow Model, Jaymin Patel

Industrial Engineering Undergraduate Honors Theses

College football is a very popular sport in the United States. There is much debate over the college football rankings every week. A maximum flow network is implemented into the CMS+ rankings to observe the effects it has on the college football rankings.

Modeling Information Reliability And Maintenance: A Systematic Literature Review, Daysi A. Guerra Garcia

Industrial Engineering Undergraduate Honors Theses

Operating a business efficiently depends on effective everyday decision-making. In turn, those decisions are influenced by the quality of data used in the decision-making process, and maintaining good data quality becomes more challenging as a business expands. Protecting the quality of the data and the information it generates is a challenge faced by many companies across all industrial sectors. As companies begin to use data from these large data bases they will need to begin to develop strategies for maintaining and assessing the reliability of the information they generate using this data. A considerable amount of literature exists on data …

Evaluation Of Conservation Practices Through Simulation Modeling And Tool Development, Gurdeep Singh

Graduate Theses and Dissertations

For the first objective, predicted impacts of selected Mississippi River Basin Initiative (MRBI) conservation practices (CPs) on sediment and nutrient loss were assessed. The study area was L’Anguille River Watershed (LRW), a priority focus watershed of the MRBI program and the simulated CPs were filter strip, critical area planting, grade stabilization structure, irrigation land leveling, irrigation pipeline, irrigation water management, and nutrient management. The Soil and Water Assessment Tool (SWAT) model was calibrated (1998 – 2005) and validated (2006 – 2012) for flow, sediment, total phosphorus (TP), and nitrate-nitrogen (NO3-N) at the Colt site (503 sq. km. drainage area) and …

Design And Development Of A Wearable Wireless Health Monitoring System: A Smart Watch Approach, Keerthi Paranikumar

Graduate Theses and Dissertations

According to Statistics, every year, about 610,000 people die because of heart disease in United States of America. (i.e. 1 in every 4 deaths.*) Heart disease is common for both men and women. Annually, about 370,000 people die because of coronary heart disease, which is the most common type of heart disease [1]. About 735,000 Americans have heart attack every year. In this, 210,000 people gets heart attack who already has heart problems and 525,000 people get heart attack for the first time [2]. Not many people know that they have heart problems. Around 47% of the people in United …

Epitaxial Growth Of Si-Ge-Sn Alloys For Optoelectronic Device Application, Aboozar Mosleh

Graduate Theses and Dissertations

Microelectronics industry has experienced a tremendous change over the last few decades and has shown that Moore’s law has been followed by doubling the number of transistors on the chip every 18 months. However, continuous scaling down of the transistors size is reaching the physical limits and data transfer through metal interconnects will not be able to catch up with the increasing data processing speed in the future. Therefore, optical data transfer between chips and on-chip has been widely investigated. Silicon based optoelectronics has received phenomenal attention since Si has been the core material on which microelectronic industry has been …

Prediction Of Rupture In Abdominal Aortic Aneurysm, Qusay Alfaori

Graduate Theses and Dissertations

Studying the development of abdominal aortic aneurysm (AAA) through quantification of its growth kinetics and rupture criteria is important to decrease the risk of this life-threatening event. Uniaxial and biaxial testing of healthy and time-dependent Type-I collagen degraded aortic specimens from pigs was performed. Stress-strain suitable mathematical models describing the behavior of abdominal aortic tissue were utilized to derive specific tissue properties and parameters. Reduction in Type-I collagen fraction was observed using picrosirius red staining method, bright field microscopy, and MATLAB. Finite Element Modeling (FEM) of healthy and time-dependent Type-I collagen degraded abdominal aortas were performed using ABAQUS finite element …

The Information Of Spam, Sawyer C. Anderson

Computer Science and Computer Engineering Undergraduate Honors Theses

This paper explores the value of information contained in spam tweets as it pertains to prediction accuracy. As a case study, tweets discussing Bitcoin were collected and used to predict the rise and fall of Bitcoin value. Precision of prediction both with and without spam tweets, as identified by a naive Bayesian spam filter, were measured. Results showed a minor increase in accuracy when spam tweets were included, indicating that spam messages likely contain information valuable for prediction of market fluctuations.

Method Assessment For Microalgae Quantification In Wastewater Treatment And Biofuel Production, Kristen S. Harrison

Crop, Soil and Environmental Sciences Undergraduate Honors Theses

There is growing interest in the use of microalgae for wastewater treatment and biofuel production. However, there is not yet a reliable, user-friendly method of quantifying the biomass and lipid production of a large sample of algae. This study aims to establish and validate new methods for green microalgae quantification using the Microplate reader and the Coulter Counter. Chlorella vulgaris was chosen as the ‘ideal’ algal species for wastewater treatment and biofuel production due to its structure, lipid production, and pollution removal ability. Three traditional quantification methods -- microscope cell count, lipid separation, and chlorophyll extraction -- were compared to …

Comparative Analysis Of Buckling-Restrained Braced Frames In Eccentric Configuration (Brbf-Es) And Eccentrically Braced Frames (Ebfs), Peter T. Vayda

Civil Engineering Undergraduate Honors Theses

Continuing on the findings of “Using Buckling-Restrained Braced Frames in Eccentric Configuration,” by Dr. Gary S. Prinz, P.E., which determined that, from a performance standpoint, BRBF-Es could be a viable alternative for EBFs. A comparative analysis was conducted on the design procedures and initial cost estimates of BRBF-Es and EBFs. Upon designing four 12-Story buildings (two BRBF-Es and two EBFs), it was determined that BRBF-Es were easier to design due to the statically determinant system. The initial costs estimates of BRBF-Es; however, ranged upwards of 30% more cost than EBFs. Therefore, the initial investment of more intensive structural engineering design …

Evapoporometry: An Effective Analytical Technique For Membrane Pore Size Characterization Of Hollow Fiber Membranes, Alex J. Moix

Chemical Engineering Undergraduate Honors Theses

A new analytical technique called evapoporometry has shown to be an effective and inexpensive method for membrane pore size characterization. This technique is based on the correlation between vapor pressure and pore size as described by the Kelvin equation. Evapoporometry has many advantages over tradition pore size characterization techniques. This technique allows for large sample sizes, uses minimal equipment, is capable of analyzing membranes within a wide range of pore sizes, and provides a highly descriptive representation of the pore distribution. This research looks at the application of evapoporometry as a technique for characterization of hollow fiber membranes. Using the …

Using Precision Agriculture Field Data To Evaluate Combine Harvesting Efficiency, Justin Carroll

Agricultural Education, Communications and Technology Undergraduate Honors Theses

Soybean crops must be harvested during a limited time period using expensive combines and associated equipment. Maximizing combine field efficiency, the ratio of the actual harvesting capacity to theoretical harvesting capacity, is an important objective of machinery managers. Spatial and temporal yield data from a 2012 CaseIH 8120 Axial-Flow combine equipped with a 30-foot MacDon D-65 Draper header and the Case-IH Advanced Farming System (AFS) yield monitoring system were used to examine field efficiency when harvesting soybean in three Arkansas Delta irrigated soybean fields during the 2015 season. Time efficiencies (TE) in the three fields ranged from 72.9 to 85.8% …

Rupture In Abdominal Aortic Aneurysm, Qusay Alfaori

Graduate Theses and Dissertations

Quantification of abdominal aortic aneurysm development, its growth kinetics, and rupture criteria are important to decrease the risk of this life-threatening event. Uniaxial testing of healthy and collagen degraded aortic specimens from pigs was performed. A mathematical model, from the literature, for the stress-strain relationship that is suitable for describing the behavior of abdominal aortic tissue was used to derive specific tissue properties/parameters as a function of strain rate and as a function of specimen orientation. Analyses consisting of Finite Element Modeling of healthy and collagen degraded abdominal aortas were performed using ABAQUS finite element code and the measured properties. …

Swat Model Simulation Of Bioenergy Crop Impacts On Water Quality In Cache River Watershed, Eeshan Kumar

Graduate Theses and Dissertations

Energy security through increased biofuel production is one of the components of the Energy Independence and Security Act (EISA) 2007. As per EISA 2007 mandate, appropriate independent research institutes are required to assess concerns to natural biodiversity due to biofuel production and report it to the Congress through the Environment Protection Agency (EPA). Planners, researchers, and agencies concerned with environmental regulations, ideally, would like to have location-specific information about the impacts for developing appropriate management interventions. This study examines long-term impacts on water quality in response to targeted (i.e. marginal lands) production of biofuel crops by setting up two SWAT …