Open Access. Powered by Scholars. Published by Universities.®
Articles 1 - 5 of 5
Full-Text Articles in Engineering
K0.25mn2o4 Nanofiber Microclusters As High Power Cathode Materials For Rechargeable Lithium Batteries, Chaofeng Zhang, Chuanqi Feng, Peng Zhang, Zaiping Guo, Zhixin Chen, Sean Li, Hua-Kun Liu
K0.25mn2o4 Nanofiber Microclusters As High Power Cathode Materials For Rechargeable Lithium Batteries, Chaofeng Zhang, Chuanqi Feng, Peng Zhang, Zaiping Guo, Zhixin Chen, Sean Li, Hua-Kun Liu
Australian Institute for Innovative Materials - Papers
K0.25Mn2O4 microclusters assembled from single-crystalline nanofibers were synthesized via a hydrothermal process at different temperatures. The possibility of using these materials as cathode material for lithium ion batteries was studied for the first time. The charge/discharge results showed that the K0.25Mn2O4 nanofiber microclusters synthesized at 120 degrees C exhibit excellent lithium storage properties, with a high reversible capability (360 mA h g-1 at current density of 100 mA g-1) and stable lithium-ion insertion/de-insertion reversibility. The charge/discharge mechanism in lithium ion batteries was studied and proposed for the …
Free-Standing Single-Walled Carbon Nanotube/Sno2 Anode Paper For Flexible Lithium-Ion Batteries, Lukman Noerochim, Jia-Zhao Wang, Shulei Chou, David Wexler
Free-Standing Single-Walled Carbon Nanotube/Sno2 Anode Paper For Flexible Lithium-Ion Batteries, Lukman Noerochim, Jia-Zhao Wang, Shulei Chou, David Wexler
Australian Institute for Innovative Materials - Papers
Free-standingsingle-walledcarbonnanotube/SnO2 (SWCNT/SnO2) anodepaper was prepared by vacuum filtration of SWCNT/SnO2 hybrid material which was synthesized by the polyol method. From field emission scanning electron microscopy and transmission electron microscopy, the CNTs form a three-dimensional nanoporous network, in which ultra-fine SnO2 nanoparticles, which had crystallite sizes of less than 5 nm, were distributed, predominately as groups of nanoparticles on the surfaces of singlewalled CNT bundles. Electrochemical measurements demonstrated that the anodepaper with 34 wt.% SnO2 had excellent cyclic retention, with the high specific capacity of 454 mAh g−1 beyond 100 cycles at a current …
Microporous Gel Polymer Electrolytes For Lithium Rechargeable Battery Application, Nurul Hayati Idris, Md. Mokhlesur Rahman, Jia-Zhao Wang, Hua-Kun Liu
Microporous Gel Polymer Electrolytes For Lithium Rechargeable Battery Application, Nurul Hayati Idris, Md. Mokhlesur Rahman, Jia-Zhao Wang, Hua-Kun Liu
Australian Institute for Innovative Materials - Papers
Microporous poly(vinylidene fluoride)/poly(methyl methacrylate) (PVDF/PMMA) membranes were prepared using the phase-separation method. Then, the membranes were immersed in liquid electrolyte to form polymer electrolytes. The effects of PMMA on the morphology, degree of crystallinity, porosity, and electrolyte uptake of the PVDF membrane were studied. The addition of PMMA increased the pore size, porosity and electrolyte uptake of the PVDF membrane, which in turn increased the ionic conductivity of the polymer electrolyte. The maximum ionic conductivity at room temperature was 1.21 × 10−3 S cm−1 for Sample E70. The polymer electrolyte was investigated, along with lithium iron phosphate (LiFePO4) as cathode …
Lifepo4-Fe2p-C Composite Cathode: An Environmentally Friendly Promising Electrode Material For Lithium-Ion Battery, M. Mahfuzur Rahman, Jiazhao Wang, Rong Zeng, David Wexler, Hua-Kun Liu
Lifepo4-Fe2p-C Composite Cathode: An Environmentally Friendly Promising Electrode Material For Lithium-Ion Battery, M. Mahfuzur Rahman, Jiazhao Wang, Rong Zeng, David Wexler, Hua-Kun Liu
Australian Institute for Innovative Materials - Papers
In this investigation, the synthesis strategy is involved the creation of LiFePO4-Fe2P-C composites with a porous conductive architecture, which includes distinct regions or clusters containing antiferromagnetic LiFePO4 in close proximity to ferromagnetic Fe2P. The microstructure is achieved by using a simple ultra-fast solvent assisted manual grinding method, combined with solid state reaction, which can replace the time-consuming high energy ball milling method. The crystalline structure, morphology, and electrochemical characterization of the synthesised product are investigated systematically. The electrochemical performance is outstanding, especially the high C rate. The composite cathode is found to display specific capacity of 167 mAh g-1 at …
Irradiation Si On Carbon Nanotube Paper As A Flexible Anode Material For Lithium-Ion Batteries, Shulei Chou, Mihail Ionescu, Jia-Zhao Wang, Brad Winton, Hua-Kun Liu
Irradiation Si On Carbon Nanotube Paper As A Flexible Anode Material For Lithium-Ion Batteries, Shulei Chou, Mihail Ionescu, Jia-Zhao Wang, Brad Winton, Hua-Kun Liu
Australian Institute for Innovative Materials - Papers
Silicon single walled carbon nanotube composite paper was modified by low energy ion implantation using 5i to obtain a flexible composite paper. Raman and FE-SEM results show that structure of SWCNT could be destroyed by the implantation. Electrochemical measurements display that the implanted SI can improve the specific capacity and the reversible capacity of CNT paper. After 50 cycles, the specific capacity of 5Hmplanted CNT paper is 30 per cent higher than the pristine CNT.