Engineering Commons^™

Real-Time 3-D Reconstruction By Means Of Structured Light Illumination, Kai Liu

University of Kentucky Doctoral Dissertations

Structured light illumination (SLI) is the process of projecting a series of light striped patterns such that, when viewed at an angle, a digital camera can reconstruct a 3-D model of a target object's surface. But by relying on a series of time multiplexed patterns, SLI is not typically associated with video applications. For this purpose of acquiring 3-D video, a common SLI technique is to drive the projector/camera pair at very high frame rates such that any object's motion is small over the pattern set. But at these high frame rates, the speed at which the incoming video can …

Extraction And Prediction Of System Properties Using Variable-N-Gram Modeling And Compressive Hashing, Muthulakshmi Muthukumarasamy

University of Kentucky Doctoral Dissertations

In modern computer systems, memory accesses and power management are the two major performance limiting factors. Accesses to main memory are very slow when compared to operations within a processor chip. Hardware write buffers, caches, out-of-order execution, and prefetch logic, are commonly used to reduce the time spent waiting for main memory accesses. Compiler loop interchange and data layout transformations also can help. Unfortunately, large data structures often have access patterns for which none of the standard approaches are useful. Using smaller data structures can significantly improve performance by allowing the data to reside in higher levels of the memory …

Arsenite Oxidation By Pure Cultures Of Thiomonas Arsenivorans Strain B6 In Bioreactor Systems, Aniruddha Dastidar

University of Kentucky Doctoral Dissertations

The removal of arsenic toxicity from water is accomplished by a preliminary preoxidative step transforming the most toxic form, arsenite (As (III)), to the least toxic form, arsenate (As (V)). The potential of As (III) oxidation to As (V) was initially investigated in batch reactors using the chemoautotrophic Thiomonas arsenivorans strain b6 under varying initial As (III) and cell concentrations and at optimal pH and temperature conditions (pH 6.0 and temperature 30°C). The strain b6 completely oxidized As (III) to As (V) during exponential growth phase for lower levels of As (III) concentrations (≤ 100 mg/L) but continued into stationary …

A Continuous Mathematical Model Of The One-Dimensional Sedimentation Process Of Flocculated Sediment Particles, Sebastian Fernando Torrealba

University of Kentucky Doctoral Dissertations

A new continuous one-dimensional sedimentation model incorporating a new continuous flocculation model that considers aggregation and fragmentation processes was derived and tested. Additionally, a new procedure to model sediment particle size distribution (PSD) was derived. Basic to this development were three different parametric models: Jaky, Fredlund and the Gamma probability distribution (GPD) were chosen to fit three different glass micro-spheres PSDs having average particle sizes of 7, 25 and 35 microns. The GPD provided the best fit with the least parameters. The bimodal GPD was used to fit ten sediment samples with excellent results (< 5% average error). A continuous flocculation model was derived using the method of moments for solving the continuous Smoluchowski coagulation equation with fragmentation. The initial sediment PSD was modeled using a bimodal GPD. This new flocculation model resulted in a new general moments’ equation that considers aggregation and fragmentation processes, which is represented by a system of ordinary differential equations. The model was calibrated using a genetic algorithm with initial and flocculated PSDs of four sediment samples and four anionic polyacrylamides flocculants. The results show excellent correlation between predicted and observed values (R² > 0.9878). A new continuous …

Digital Inpainting Algorithms And Evaluation, Vijay Venkatesh Mahalingam

University of Kentucky Doctoral Dissertations

Digital inpainting is the technique of filling in the missing regions of an image or a video using information from surrounding area. This technique has found widespread use in applications such as restoration, error recovery, multimedia editing, and video privacy protection. This dissertation addresses three significant challenges associated with the existing and emerging inpainting algorithms and applications. The three key areas of impact are 1) Structure completion for image inpainting algorithms, 2) Fast and efficient object based video inpainting framework and 3) Perceptual evaluation of large area image inpainting algorithms.

One of the main approach of existing image inpainting algorithms …

Quality Analysis In Flexible Manufacturing Systems With Batch Productions, Junwen Wang

University of Kentucky Doctoral Dissertations

To improve product quality and reduce cost, batch production is often implemented in many exible manufacturing systems. However, the current literature does not provide any method to analyze the quality performance in a flexible manufacturing system with batch production.

In this research, we present an analytical method with closed-form formula to evaluate the quality performance in such systems. Based on the model, we discover and investigate monotonic and non-monotonic properties in quality to provide practical guidance for operation management. To improve product quality, we introduce the notions of quality improvability with respect to product sequencing. In addition, we develop the …

Localized Mechanical Deformation And Dissolution Of 45s5 Bioglass, Ding Li

University of Kentucky Doctoral Dissertations

Bioactive glasses react with the human physiological solution in control of their biofunctionality. The stress state in bioactive glasses determines the chemomechanical reaction and their biofunctionality. Using the microindentation technique, the effect of the indentation deformation on the surface damage and material dissolution of 45S5 bioglass was investigated.

The indentation-induced residual stresses were calculated. Complete anelastic recoveries of the indentation depths and the impression marks were observed for the first time, which was likely driven by the stored strain energy over the anelastic deformation zone. The indentation-induced local surface damages were revealed before and after the immersion tests in phosphate …

Nonparametric Estimation Of Derivatives With Applications, Benjamin Hall

University of Kentucky Doctoral Dissertations

We review several nonparametric regression techniques and discuss their various strengths and weaknesses with an emphasis on derivative estimation and confidence band creation. We develop a generalized C(p) criterion for tuning parameter selection when interest lies in estimating one or more derivatives and the estimator is both linear in the observed responses and self-consistent. We propose a method for constructing simultaneous confidence bands for the mean response and one or more derivatives, where simultaneous now refers both to values of the covariate and to all derivatives under consideration. In addition we generalize the simultaneous confidence bands to account for heteroscedastic …

Novel Approaches In Structured Light Illumination, Yongchang Wang

University of Kentucky Doctoral Dissertations

Among the various approaches to 3-D imaging, structured light illumination (SLI) is widely spread. SLI employs a pair of digital projector and digital camera such that the correspondences can be found based upon the projecting and capturing of a group of designed light patterns. As an active sensing method, SLI is known for its robustness and high accuracy. In this dissertation, I study the phase shifting method (PSM), which is one of the most employed strategy in SLI. And, three novel approaches in PSM have been proposed in this dissertation. First, by regarding the design of patterns as placing points …

Effect Of Fluorination On Partitioning Behavior And Bilayer Self Assembly, Vivian Aramide Ojogun

University of Kentucky Doctoral Dissertations

Fluorinated systems are defined by unique properties that offer advantages in drug delivery, material synthesis and industrial applications. In comparison to their hydrocarbon counterparts, the design of fluorinated solutes for tailored applications is limited by the inability to predict the effect of fluorination on phase behavior. This work examines and interprets the influence of fluorination on the phase behavior of fluorinated solutes and surfactants, with emphasis on their impact on vesicle bilayers.

Thermodynamic partitioning of functionalized series of fluorinated and hydrocarbon nicotinate prodrugs fashioned to promote solubility in a fluorocarbon solvent (perfluorooctyl bromide; PFOB) is measured. Predictive approaches are also …

Targeted Polymeric Biomaterials For The Prevention Of Post Surgical Adhesions, John M. Medley

University of Kentucky Doctoral Dissertations

Despite recent advances in surgical technique and the development of numerous therapeutic agents, the formation post surgical adhesions (PSA) continues to cause complications for many patients. In this research, we have employed a rational system to develop a novel treatment to address this clinical need. Based on an understanding of the biochemical events that lead to PSA formation, a series of targeted polymeric biomaterials was designed to interrupt the fibrin gel matrix propagation and suppress PSA formation.

Using group transfer polymerization, a series of well controlled block copolymers of polyacrylic acid and poly(ethylene glycol-methacrylate) based materials was synthesized. Subsequent functionalization …

Real-Time Model Predictive Control Of Quasi-Keyhole Pipe Welding, Kun Qian

University of Kentucky Doctoral Dissertations

Quasi-keyhole, including plasma keyhole and double-sided welding, is a novel approach proposed to operate the keyhole arc welding process. It can result in a high quality weld, but also raise higher demand of the operator. A computer control system to detect the keyhole and control the arc current can improve the performance of the welding process. To this effect, developing automatic pipe welding, instead of manual welding, is a hot research topic in the welding field.

The objective of this research is to design an automatic quasi-keyhole pipe welding system that can monitor the keyhole and control its establishment time …

Near-Field Radiative Transfer: Thermal Radiation, Thermophotovoltaic Power Generation And Optical Characterization, Mathieu Francoeur

University of Kentucky Doctoral Dissertations

This dissertation focuses on near-field radiative transfer, which can be defined as the discipline concerned with energy transfer via electromagnetic waves at sub-wavelength distances. Three specific subjects related to this discipline are investigated, namely nearfield thermal radiation, nanoscale-gap thermophotovoltaic (nano-TPV) power generation and optical characterization. An algorithm for the solution of near-field thermal radiation problems in one-dimensional layered media is developed, and several tests are performed showing the accuracy, consistency and versatility of the procedure. The possibility of tuning near-field radiative heat transfer via thin films supporting surface phononpolaritons (SPhPs) in the infrared is afterwards investigated via the computation of …

Advancements In Transmission Line Fault Location, Ning Kang

University of Kentucky Doctoral Dissertations

In modern power transmission systems, the double-circuit line structure is increasingly adopted. However, due to the mutual coupling between the parallel lines it is quite challenging to design accurate fault location algorithms. Moreover, the widely used series compensator and its protective device introduce harmonics and non-linearities to the transmission lines, which make fault location more difficult. To tackle these problems, this dissertation is committed to developing advanced fault location methods for double-circuit and series-compensated transmission lines.

Algorithms utilizing sparse measurements for pinpointing the location of short-circuit faults on double-circuit lines are proposed. By decomposing the original network into three sequence …

Heterojunctions And Schottky Diodes On Semiconductor Nanowires For Solar Cell Applications, Piao Liu

University of Kentucky Doctoral Dissertations

Photovoltaic devices are receiving growing interest in both industry and research institutions due to the great demand for clean and renewable energy. Among all types of solar cells, cadmium sulfide (CdS) – cadmium telluride (CdTe) and cadmium sulfide (CdS) - copper indium diselenide (CuInSe₂ or CIS) heterojunctions based thin film solar cells are of great interest due to their high efficiency and low cost. Further improvement in power conversion efficiency over the traditional device structure can be achieved by tuning the optical and electric properties of the light absorption layer as well as the window layer, utilizing nano template-assisted …

Remote Controlled Hydrogel Nanocomposites: Synthesis, Characterization, And Applications, Nitin S. Satarkar

University of Kentucky Doctoral Dissertations

There is significant interest in the development of hydrogels and hydrogel nanocomposites for a variety of biomedical applications including drug delivery, sensors and actuators, and hyperthermia cancer treatment. The incorporation of nanoparticulates into a hydrogel matrix can result in unique material characteristics such as enhanced mechanical properties, swelling response, and capability of remote controlled (RC) actuation. In this dissertation, the development of hydrogel nanocomposites containing magnetic nanoparticles/carbon nanotubes, actuation with remote stimulus, and some of their applications are highlighted.

The primary hydrogel nanocomposite systems were synthesized by incorporation of magnetic nanoparticles into temperature responsive N-isopropylacrylamide (NIPAAm) matrices. Various nanocomposite properties …

Synthesis And Characterization Of Magnetic Hydrogel Nanocomposites For Cancer Therapy Applications, Samantha Ann Meenach

University of Kentucky Doctoral Dissertations

Currently, cancer is the second leading cause of death in the United States. Conventional cancer treatment includes chemotherapy, radiation, and surgical resection, but unfortunately, all of these methods have significant drawbacks. Hyperthermia, the heating of cancerous tissues to between 41 and 45°C, has been shown to improve the efficacy of cancer therapy when used in conjunction with irradiation and/or chemotherapy. In this work, a novel method for remotely administering heat is presented. This method involves heating of tumor tissue using hydrogel nanocomposites containing magnetic nanoparticles which can be remotely heated upon exposure to an external alternating magnetic field (AMF). The …

Integration Of The Regression-Based Land Use Model And The Combined Trip Distribution-Assignment Transportation Model, Meiwu An

University of Kentucky Doctoral Dissertations

Regional growth caused the emergence of traffic congestion and pollution in the past few decades, which have started to affect small urban areas. These problems are not only related to transportation system design but also to land use planning. There has been growing recognition that the relationship between land use and transportation needs to be understood and analyzed in a consistent and systematic way. Integrated urban models have recently been introduced and implemented in several metropolitan areas to systematically examine the relationship between land use and transportation. The general consensus in the field of integrated urban models is that each …

The Relationship Between Information Technology And Construction Productivity, Dong Zhai

University of Kentucky Doctoral Dissertations

Over the past decades, information technology has been impacting industries, economics, the way of life and even the culture throughout the world. Productivity has been attracting much attention as an important indicator of economics, and numerous researchers have investigated the relationship between information technology and productivity. Construction is one of the largest industries in the United States, but little research has been conducted to investigate the relationship between information technology and construction productivity.

The major objective of this dissertation is to determine the degree (if any) to which information technology usage, specifically the use of information technology to automate and …

Nanoscale Functionalization And Characterization Of Surfaces With Hydrogel Patterns And Biomolecules, Hariharasudhan Chirra Dinakar

University of Kentucky Doctoral Dissertations

The advent of numerous tools, ease of techniques, and concepts related to nanotechnology, in combination with functionalization via simple chemistry has made gold important for various biomedical applications. In this dissertation, the development and characterization of planar gold surfaces with responsive hydrogel patterns for rapid point of care sensing and the functionalization of gold nanoparticles for drug delivery are highlighted.

Biomedical micro- and nanoscale devices that are spatially functionalized with intelligent hydrogels are typically fabricated using conventional UV-lithography. Herein, precise 3-D hydrogel patterns made up of temperature responsive crosslinked poly(N-isopropylacrylamide) over gold were synthesized. The XY control of the hydrogel …

Laminar-Turbulent Transition For Attached And Separated Flow, Qian Zhang

University of Kentucky Doctoral Dissertations

A major challenge in the design of turbomachinery components for aircraft gas turbine engines is high cycle fatigue failures due to flutter. Of particular concern is the subsonic/transonic stall flutter boundary which occurs at part speed near the stall line. At these operating conditions the incidence angle is large and the relative Mach number is high subsonic or transonic. Viscous effects dominate for high incidence angles.

In order to predict the flutter phenomena, accurate calculation of the steady and unsteady aerodynamic loading on the turbomachinery airfoils is necessary. The development of unsteady aerodynamic models to predict the unsteady forces and …