Engineering Commons^™

Glass Bubbles Grafted With Polymer Brushes For Liquid Hydrocarbon Fire Extinguishment, Randall Snipes

All Dissertations

The current most efficient solution to fighting liquid pool fires involves the use of firefighting foams containing fluorinated surfactants. The physiochemical properties of these foams are considerably different to all other currently available firefighting foams. Fluorinated surfactants lower the surface tension to a point where the foam solution draining from the foam structure forms a continuous aqueous film on the surface of a volatile hydrocarbon fuel, adding an additional barrier to fuel vapor diffusion to the burning fire. For this reason, these foams qualify as aqueous film forming foams (AFFFs). However, fluorinated compounds are extremely harmful for the environment due …

Rc Baja Suspension And Steering, Garrett Bailey

All Undergraduate Projects

The RC Baja team set out to engineer and construct a working remote-control device that can compete in the ASME Baja Competition. The students have a focus on either suspension and steering or drivetrain and chassis. This report is centered on the suspension and steering. First, multiple analyses were completed using engineering methods such as mechanical design, statics, strengths of materials, and dynamics for parts of the device. The calculations found in the analysis are then used to create designs for the parts so that they will meet the requirements and be successful in the competition. After the parts are …

Radio-Controlled Baja Car, Jaxx Brown

All Undergraduate Projects

The Central Washington University RC Baja competition tests students’ skills in engineering in a matter of ability to design, construct and test an RC car. The objective of this senior project is to manufacture efficient suspension and steering systems for an RC vehicle and compete at the end of the school year against other students’ vehicles. Two races will be conducted during the competition, the RC vehicle will compete in a slalom-and-sprint and a Baja. Using more than one manufacturing method and material was expected of students to create the steering and suspension systems. Through CAD software and 3D printers …

Rc Baja Project: Suspension And Steering, Chance Hills

All Undergraduate Projects

Students designed and manufactured an RC Baja car to compete in the ASME RC Baja competition. The goal of this section of the project was to create a steering system and suspension system that work together properly with a partner’s chassis/drive train systems during tests and competitions. The car needed to be able to complete in the three events, which are a drag race, a solemn course, and the Baja event. The RC will also be evaluated on the ability to climb inclines, top speed, and withstand the drop test. This proposal will explain all the details and effort that …

Tunable Filtration Of Particles During Dip-Coating, Connor Copeland

All Theses

When a solid substrate is withdrawn from a liquid bath a thin coating is deposited whose thickness is given by the Landau-Levich-Derjaguin (LLD) law. We perform an experimental study of dip coating of particle suspensions showing that particles of a given size can become entrained in the meniscus by the competition between viscous and surface tension forces. This is called capillary filtration and can be used as a tunable dynamic filter. For single particle suspensions, filtration can be in terms of either clumps or single particles, with the relevant entrainment points depending upon the rheology of the working fluid, either …

Mtb Daq - Mountain Bike Data Acquisition System, Theodore J. Philliber, Ronan M. Shaffer, Dylan M. Ruiz, John M. Ringrose

Mechanical Engineering

Mountain bike suspensions systems are set up and tuned based only on qualitative, ‘feeling’-based metrics. The MTB DAQ, sponsored by Dr. Joseph Mello with the Cal Poly Mechanical Engineering Department, is a data acquisition system we developed to improve suspension tuning with a data-driven approach. The system mounts to a bicycle frame and has sensors that measure vibration and travel speed to characterize the bike’s motion. While similar systems exist, they cost in the thousands of dollars range and are very specific to individual bike geometry. Our system was designed to be more affordable to the average rider as well …

Rc Baja Suspension And Chassis, Sean A. Gordon

All Undergraduate Projects

Students at Central Washington University were challenged with constructing a RC Baja car capable of competing against other universities from around the state as a comprehensive senior project. These projects were completed in teams of 2 separated into the suspension and chassis, as well as steering and drive train. Completion of this car requires the ability to complete several tests the measure each component of the car working in unison. Testing begins with a straight-line sprint to determine the top speed of the car; this test will be followed by a slalom test to determine steering capabilities. The final test …

Rc Baja Independent Suspension And Chassis Design And Development, Joseph Fritz

All Undergraduate Projects

The goal of this project is to develop an RC car to compete in the MET RC Baja competition. A car will be constructed to be as lightweight, durable, and fast as possible while abiding by ROAR (Remotely Operated Auto Racers) regulations. As such, suspension, steering, chassis and drivetrain systems will need to be devised to form a complete vehicle. The chassis must provide mounting points for all other components of the vehicle and provide a rigid platform in order to create a stable vehicle. The suspension must operate smoothly, allowing for at least 1 inch of ground clearance, …

R/C Baja Truck Suspension, Chassis And Steering, Ryan Lafrombois

All Undergraduate Projects

The ASME RC Baja Challenge is an annual competition that the Central Washington University Mechanical Engineering and Technology (MET) department takes part in. Senior level engineers divided the work between the drivetrain and the chassis/suspension while designing and manufacturing to meet a set of requirements. Next, a device was to be developed to be able to withstand the extreme forces to be successful in the competition at the end of the year. The process would require that the students use their acquired knowledge and skills to design, manufacture, and analyze a capable device. Designing involved the completion of 12 analyses …

R/C Baja: Suspension And Chassis, Caden Foster

All Undergraduate Projects

Students designed and manufactured an RC Baja truck to compete as a team in the annual ASME RC Baja Competition in various events and obstacles. A chassis and suspension system were required to house and secure each of the RC components to successfully compete and function as intended. The team designed a 1/10^th scale model RC truck through various analysis calculations and model mockup drawings to optimally perform and compete in a competition amongst other teams of designers. The American Society of Mechanical Engineers (ASME) competition will include the straight-line dash, slalom, and Baja course time trial. This project …

Ljm Rc Baja Vehicle Project Chassis And Suspension, Paul Lervick

All Undergraduate Projects

An RC car was designed, analyzed, and manufactured to compete in the ASME RC Baja competition. The focus was to optimize the suspension and chassis components to minimize the weight while maintaining the structural strength of the components which would intern supplement the overall speed and stability of the vehicle. Other components were the responsibility of the teammate Cam Jamison. To complete this there was extensive research done on Traxxas RC cars and what went into making a high-performing vehicle that would compete well in the 3 races that comprise the competition (slalom, sprint, and obstacle course). There were then …

Subjective Evaluation Of Vehicle Semi-Active Suspension For Improved Ride And Handling, Zachery Sinasac

Electronic Theses and Dissertations

The number of passenger cars currently equipped with semi-active suspensions has been steadily increasing in recent decades. These suspension systems provide an improvement in ride and handling when compared to passive suspensions. Currently, the approach to evaluating and tuning semi-active suspensions has been limited to objective methods or time-consuming alterations made on physical components. To alleviate the time and costs and improve the fidelity of such methods, a novel solution to subjectively evaluating vehicle semi-active suspensions is presented. The subjective evaluation method herein involves the use of a state-of-the-art dynamic driving simulator with drivers to subjectively evaluate and tune virtual …

Mini Rc Baja Car, Jason Schindler

All Undergraduate Projects

Incorporating each aspect of engineering incorporated into a senior project is difficult. That is why an RC Baja car is a great senior project for Mechanical Engineering students. The approach that students must take to design, construct, and test the car is to set parameters, and to make overall goals that can be easily measured. These goals include, but not limited to things like a $700 budget and the ability to withstand a 1-foot drop to a flat surface on all four wheels simultaneously. First, the design must meet the specifications and rules that are set previously. This ensures that …

Nrj Rc Baja Vehicle Project - Transmission, Suspension, And Body Systems, Jeffrey Ryan Harn

All Undergraduate Projects

Students of Central Washington University’s Mechanical Engineering technology program were tasked with designing, manufacturing, and testing a remote-controlled scale vehicle for the American Society of Mechanical Engineers (ASME) Radio-Controlled (RC) Baja Car Contest sanctioned by Remotely Operated Auto Racers (ROAR). A team of three students was assembled and responsibility over the sections of the RC vehicle were divided amongst the three students. This report focuses on the design, manufacture, testing, and evaluation of the suspension and transmission systems of the RC vehicle. A suspension tower component and transmission housing assembly were conceived to satisfy the RC suspension and transmission systems. …

Catmobile Ev Front Suspension, Daymon Fritz

All Undergraduate Projects

The Central Washington University (CWU) Mechanical Engineering Technology (MET) program owns an electric vehicle called the “Cat-Mobile” designed to be entered into an Electrothon America race. The Cat-Mobile is a collaborative project, various aspects of which are built by CWU MET students in the capstone sequence of the senior year. For the Cat-Mobile to operate safely and effectively, it was necessary to design and build a proper front suspension system. The suspension needed to meet Electrothon America Handbook rules dictating a minimum ground clearance of 2” and optimize material usage to keep added weight at or below 20lbs. Loading and …

Rc Mini Baja Car - Suspension And Chassis, Collin Mckenzie

All Undergraduate Projects

Two students have developed a unique design of the RC Baja Car to optimize functionality and performance. A Baja car is a remote controlled 1/10 scale car that is used for recreation or competition, usually meant for competing in the ASME Baja car competition versus various schools. The competition focuses on the best time achieved in different courses that utilize speed, turns, and jumps. The objective for the project was to create a unique suspension from previous individual’s projects by creating a four-link suspension in which allows more travel in the suspension of the car and maintains functionality with the …

Zips Electric Racing Suspension Design, Christopher Thompson, Madison Hughes, Erikah Jackson, Anna Signorino

Williams Honors College, Honors Research Projects

As a member of the 2020 Zips Electric Racing Design Team, I will design the suspension subsystem with three other members. Specifically concentrating on the steering and suspension mounting points, we will optimize and improve some components from the previous year's design. Modeling of components will be done in Solidworks and suspension vehicle behavior will be modeled in MATLAB and Optimum Kinematics.

Zips Electric Racing Suspension Design, Madison Hughes, Christopher Thompson, Erikah Jackson, Anna Signorino

Williams Honors College, Honors Research Projects

I am working with three others on the suspension and steering sybsystems for the Zips Electric Racing design team at The University of Akron. We are improving upon last year's design to help create an optimized vehicle. As part of this project, we take part in weekly design reviews and team meetings, model parts in Solidworks, and perform simulations and FEA using MATLAB/SIMULINK, Solidworks, and Optimum Kinematics.

The Mechanical Development For An Autonomous Forest Service Robot, James P. Walker

Honors College Theses

Georgia’s forests are under threat from numerous invasive species of plant, both herbaceous and woody. A primary factor in the invasive potential of any given non-native plant is the lack of natural predators and rapid reseed and regrowth cycles. To combat invasive plants, this thesis proposes an artificial, robotic predator to provide a means of controlling invasive species. Although autonomous robots are currently being developed for similar agricultural purposes, none have emerged for forestry related tasks, such as proposed in this work. The chassis, inspired by rocker bogie and similar suspension systems, has been redesigned to have eight wheels, to …

Prove Endurance Car Front Suspension, Lauren A. Williams, Logan Simon, Justine G. Kwan

Mechanical Engineering

This document details the collaborative Mechanical Engineering Senior Project with Cal Poly PROVE Lab on PROVE Lab’s Project 2; an electric vehicle designed to travel 1000 miles on a single charge. Logan Simon, Justine Kwan, and Lauren Williams are given the challenge of designing an innovative proof of concept front suspension suspension for this vehicle.

After detailed research of new suspension systems, it was determined that the innovative nature could be in the form of unique manufacturing methods, materials use, or mechanical design. At this point in time, this vehicle is a purely conceptual design with no concrete requirements. Therefore …

Composite Suspension For A Mass Market Vehicle, Sarah M. Chapiama, Brian Auyeung, Jose Guerrero, Ethan Lau

Mechanical Engineering

Statement of Confidentiality: The complete senior project report was submitted to the project advisor and sponsor. The results of this project are of a confidential nature and will not be published at this time.

Rc Baja Car Suspension, Tyler Martin

All Undergraduate Projects

This year the Mechanical Engineering Technology Department at CWU is holding an R/C Baja car competition using the same rules as the ASME competition. The designed car must compete in three separate events: the slalom course, drag race, and obstacle course. By not only completing, but also being competitive in each of the events, the car will be deemed a success. Suspension and steering are two essential components of any R/C car, and was the main focus for this report. The suspension must be able to support the car in the event of impacts. In addition, the steering must be …

Asme Rc Baja Challenge: Suspension And Steering, Hunter W. Jacobson

All Undergraduate Projects

The American Society of Mechanical Engineers (ASME) usually hosts an RC Baja challenge each year, testing a RC car in three events: slalom, acceleration and Baja. Although ASME will not be holding an event this year, CWU will be holding a similar event with three RC Baja car teams from CWU. The RC car that is tested in these events is designed and manufactured typically in teams of two. The RC car that each team submits must be able to complete these events while also remaining competitive. One part of great importance for the RC car is the suspension and …

Volumetric Three-Component Velocimetry Two-Phase Flow Measurements Of Sediment Suspension Under Regular Plunging Waves, Deryn Ann Beck

Electronic Theses and Dissertations

Breaking waves suspend and transport large amounts of sediment particles in the surf zone. Two important aspects of the problem are the mechanism of sediment suspension and the distribution of the suspended sediment. One approach to solving this problem is to measure the sediment particles’ position and movement simultaneously with the characteristics of the flow field. Previous studies have found that sediment suspension events are related to a number of flow parameters including the vertical velocity, vorticity, horizontal velocity, turbulent kinetic energy, total shear stress, and turbulent shear stress. The objective of this study was to design and conduct an …

Asme Rc Baja Car: Suspension And Chassis, C. Aidan Pringle

All Undergraduate Projects

Each year the regional chapter of the American Society of Mechanical Engineers (ASME) put on a Radio Controlled (R/C) Baja car competition. The R/C car designed for the competition must compete in two events, a slalom sprint and an obstacle course. A successfully designed car will not only be able to complete each event but also be competitive in each event. A main component to the success of the R/C car is the suspension. The suspension design for this year’s car must operate effectively without interfering with the steering and drivetrain designed by Walter Lackey. The suspension utilizes a transverse …

Solar Car Suspension System, Alex Power, Adam O'Camb

Mechanical Engineering

No abstract provided.

Suspension For Electrathon Vehicle, Mackenzie Ericson Angeledes

All Undergraduate Projects

The purpose of this project was to develop a rear suspension system to support the frame of an Electrathon Vehicle. The vehicle is designed to compete in the Electrathon America competition on behalf of the Central Washington University Electric Vehicle Club. The suspension system was designed to use readily available parts sourced from manufacturers to keep the components serviceable. Using dynamic and static engineering analysis (spring equations, equations of equilibrium, stress calculations), the necessary custom components were designed. Space restrictions and limitations of the preexisting frame necessitated modifications, such as the straightness of the frame and the positioning of existing …

The University Of Akron 2015 Sae Zips Baja Off-Road Racing Team 2015 Suspension System Design, Ryan W. Timura

Williams Honors College, Honors Research Projects

Baja SAE has been an important part of the University of Akron for the last 20 years. In the early stages, Zips Baja won many races and was one of the best Baja teams around. In more recent years, the teams have not been able to keep up the high place finishes. The 2015 Baja team aims to start a new trend of high place finishes for the years to come. With many design leaders returning from the previous year, passed down knowledge, and experience from last year, it should be an attainable goal.

Team Nathan Suspension, Frankie J. Wiggins, Alex D. Seitz, Justin P. Bautista

Mechanical Engineering

Nathan Cooper is an 8-year old boy with Spinal Muscular Atrophy (SMA). SMA has affected Nathan’s muscle development and requires him to use the Standing Dani™ mobility device. The Standing Dani is a motorized standing wheelchair, or Wheelstand. Nathan controls and uses it to get around. Though the Standing Dani performs well for most functions, it has some distinct issues. The primary issue that this project addresses is its lack of suspension and the discomfort that Nathan feels as a result. After talking with our client, we developed several specifications generally related to geometry, safety, vehicle dynamics, and reliability. Many …

Understanding Chassis Inputs From The Rear Suspension Of A Snowmobile, Jamie L. Kleinendorst

Dissertations, Master's Theses and Master's Reports - Open

Today’s snowmobile industry faces great challenges in the field of noise & vibration. The area of main concern is the pass-by noise restriction defined by the Society of Automotive Engineers (SAE) test standard J192, with a maximum sound pressure level of 78 dB(A) being required by many states and national parks. To continue meet or beat this requirement without effecting machine performance, a deeper understanding of the sound transfer paths is required. This thesis examines the transfer paths created by the tunnel, rear suspension, drive shaft, and rubber composite track, with the primary source being suspension input through the ground. …