Open Access. Powered by Scholars. Published by Universities.®

Engineering Commons

Open Access. Powered by Scholars. Published by Universities.®

Articles 1 - 16 of 16

Full-Text Articles in Engineering

Winter Dynamics Of Storm Water Management Ponds And Winter Tolerance In Three Aquatic Plant Species, Patrick Strzalkowski Jan 2023

Winter Dynamics Of Storm Water Management Ponds And Winter Tolerance In Three Aquatic Plant Species, Patrick Strzalkowski

Theses and Dissertations (Comprehensive)

The vast majority of the research into the performance of stormwater management ponds (SWMPs) has been performed in warm regions or during the warmer seasons in temperate regions. It is presumed that SWMPs are inactive in the winter as any potential stormwater is trapped in snow and ice. The main goal of this thesis was to test this presumption and to study the dynamics and performance of three SWMPs during the winter. Remote water level loggers were installed into the three SWMPs and daily grab samples from the influents and effluents were taken and analyzed for total phosphorus (TP), chloride, …


Effect Of Cloud Cover On Optimum Orientations Of Fixed Solar Panels For Maximum Yearly Energy Collection, Prethew Prasad Jan 2021

Effect Of Cloud Cover On Optimum Orientations Of Fixed Solar Panels For Maximum Yearly Energy Collection, Prethew Prasad

Browse all Theses and Dissertations

The amount of cloud cover present in the sky is a significant factor when determining the solar radiation impinging on a solar panel. The optimum tilt required to achieve maximum energy impingement on a surface is also influenced by the amount of cloud cover. This work presents a method for determining the optimum tilt angle for a fixed solar panel when a set amount of cloud cover is present in the sky. Fixed tilt angles that have the most incident solar energy over the course of a year as a function of cloud cover, latitude, and azimuthal angle orientation are …


Irrigation Design In Montana: Accommodating Varying Water Accessibility Across The Continental Divide., John Garrett Lampson May 2020

Irrigation Design In Montana: Accommodating Varying Water Accessibility Across The Continental Divide., John Garrett Lampson

Biological and Agricultural Engineering Undergraduate Honors Theses

The design work performed in this project was conducted over two summers (2018, 2019) of internship experience with the Natural Resources Conservation Service (NRCS) across the state of Montana. The first summer’s design work was based out of Glendive, MT, in Dawson County, approximately 50 kilometers from the North Dakota border. The second summer was in Missoula, MT, in Missoula County, near the Idaho border. The two areas differ significantly in topography, weather, and water availability with the main separating geographic influence being the Rocky Mountains.

This paper focuses on the design process and requirements for two farms located outside …


Ideal Lacrosse Stick, Josh Beck, Tyler Skoloda, Noah Reed, Stanley Dembosky Jan 2020

Ideal Lacrosse Stick, Josh Beck, Tyler Skoloda, Noah Reed, Stanley Dembosky

Williams Honors College, Honors Research Projects

This project is focused on the design of a new and innovative lacrosse stick. Our main points of focus will be the strength and durability of the head. As well as solving some of the problems that exist in existing equipment. These problems were identified by interviewing experienced players at the college level. Benefits would include a stronger head that is easier to use for a player on the field to do things like pass, catch, shoot, and field ground balls in an optimal manner. Normally players will have to purchase new heads every season as a result of warping …


Optimization Study Of A Combined Wind-Solar Farm For A Specified Demand, Venkat Siddhartha Rama Jan 2020

Optimization Study Of A Combined Wind-Solar Farm For A Specified Demand, Venkat Siddhartha Rama

Browse all Theses and Dissertations

At the present time, using wind and solar energy for producing electricity in the United States is becoming cost competitive. According to Lazard’s 2019 [36] levelized cost of energy (LCOE) analysis of a number of energy sources used for producing electricity in the United States, wind and solar are cheaper than natural gas and coal. While capital, maintenance, operation, and fuel costs are included in LCOE numbers, energy source intermittency is not. Intermittency is an important issue with wind and solar energy sources, but not with natural gas or coal energy sources. Combining wind and solar energy sources into one …


Stair Climbing Hand Truck, James Mcpherson Jan 2019

Stair Climbing Hand Truck, James Mcpherson

All Undergraduate Projects

Abstract

Getting a heavy object up a flight of stairs usually requires a team of two or more people. Even with a team of people, the task is often still difficult, dangerous, and possibly insurmountable by one person. This problem is especially prevalent in for those who are moving into apartment complexes. Most apartment complexes have many buildings with two or more floors of living quarters, and elevators are often missing. This project sought to offer a solution to this problem. The solution in question; a motorized hand-truck with 2, trigonal planar pinwheels in place of the stock wheels. The …


Towards Analytical Techniques For Systems Engineering Applications, Griselda Valdepeñas Acosta Jan 2019

Towards Analytical Techniques For Systems Engineering Applications, Griselda Valdepeñas Acosta

Open Access Theses & Dissertations

One of the main objectives of systems engineering is to design, maintain, and analyze systems that help the users. To design an appropriate system for an application domain, we need to know: what are the users' desires and preferences (so that we know in what direction we should aim to change this domain), what is the current state and what is the dynamics of this application domain, and how to use all this information to select the best alternatives for the system design and maintenance. Designing a system includes selecting numerical values for many of the parameters describing the corresponding …


Opto-Thermal Characterization Of Plasmon And Coupled Lattice Resonances In 2-D Metamaterial Arrays, Vinith Bejugam Aug 2018

Opto-Thermal Characterization Of Plasmon And Coupled Lattice Resonances In 2-D Metamaterial Arrays, Vinith Bejugam

Graduate Theses and Dissertations

Growing population and climate change inevitably requires longstanding dependency on sustainable sources of energy that are conducive to ecological balance, economies of scale and reduction of waste heat. Plasmonic-photonic systems are at the forefront of offering a promising path towards efficient light harvesting for enhanced optoelectronics, sensing, and chemical separations. Two-dimensional (2-D) metamaterial arrays of plasmonic nanoparticles arranged in polymer lattices developed herein support thermoplasmonic heating at off-resonances (near infrared, NIR) in addition to regular plasmonic resonances (visible), which extends their applicability compared to random dispersions. Especially, thermal responses of 2-D arrays at coupled lattice resonance (CLR) wavelengths were comparable …


Wetting Properties Of Structured Interfaces Composed Of Surface-Attached Spherical Nanoparticles, Bishal Bhattarai Jan 2018

Wetting Properties Of Structured Interfaces Composed Of Surface-Attached Spherical Nanoparticles, Bishal Bhattarai

Browse all Theses and Dissertations

In this thesis, the effects of the external pressure and surface energy on stability and wetting transition at nanotextured interfaces are studied using molecular dynamics and continuum simulations. The surface roughness of the composite interface is modeled via an array of spherical nanoparticles with controlled wettability. It was found that in the absence of external pressure, the liquid interface is flat and its location relative to the solid substrate is determined by the radius of the particle and the local contact angle. With increasing pressure on the liquid film, its interface becomes more curved and the three-phase contact line is …


Operating Temperature Of A Solar Thermal Stirling Engine, Spencer Beck May 2017

Operating Temperature Of A Solar Thermal Stirling Engine, Spencer Beck

Senior Theses

This paper explores the relationship between the operating temperature and electricity production of a simple heat engine. A Stirling engine was designed and constructed which runs on solar thermal energy collected by a Fresnel lens. The surface area of the solar collector was varied. This manipulated the operating temperature of the Stirling engine in order to measure power output. The mechanical energy from the engine was converted to electricity using a DC motor running in reverse, acting like a generator, in conjunction with an Arduino for data collection. Although adjustments must be made in order to improve the efficiency of …


Decision Making Of Environmental Engineers On Project Selection, Millicent Amanda Davis Jan 2016

Decision Making Of Environmental Engineers On Project Selection, Millicent Amanda Davis

Walden Dissertations and Doctoral Studies

Some environmental engineers do not understand how to perceive profitable opportunities in redeveloping the large number of contaminated brownfield sites in New Jersey. The purpose of this qualitative exploratory case study was to find effective decision-making strategies that help environmental engineers acquire profitable environmental redevelopment projects. The target population consisted of 4 environmental engineers in an environmental organization in Camden County, New Jersey who possessed proven decision-making strategies that helped them acquire profitable environmental redevelopment projects in the past 5 years. The conceptual framework for this study was the multiple criteria decision method (MCDM). Semistructured interviews were conducted with the …


Design And Evaluation Of The Impact Of A Multi-Agent Control System (Framework) Applied To A Social Setting, Perez Antonio Perez Jan 2016

Design And Evaluation Of The Impact Of A Multi-Agent Control System (Framework) Applied To A Social Setting, Perez Antonio Perez

Open Access Theses & Dissertations

The objective of this research is to design and analyze the performance of a new mechanism to improve the advising of students in a nontraditional environment. This nontraditional environment includes: a minority serving, commuter campus with a high percentage of transfer students. Specifically, these demographics are unable to keep a tightly controlled cohort of students flowing through to the completion of the curriculum. Students in these circumstances usually have varied course loads and competing priorities due to family and financial needs or other societal responsibilities. Therefore, there is a need for an individualized approach to advising.

University administrations face challenges …


Teacher Influence On Elementary School Students’ Participation In Science, Technology, Engineering, And Mathematics, Courtney Hartman Jan 2015

Teacher Influence On Elementary School Students’ Participation In Science, Technology, Engineering, And Mathematics, Courtney Hartman

Honors College Theses

The purpose of this study is to explore the influence of elementary school teachers on encouraging students’ interest and participation in Science, Technology, Engineering, and Mathematics. The researcher sought to understand what methods teachers use in their classrooms to encourage students to participate in STEM subjects and programs. This mixed methods study consisted of a questionnaire to collect quantitative data, as well as an interview of selected teachers who participated in the questionnaire to collect qualitative data. The data was analyzed to determine the overall perceptions of teachers regarding the importance of encouraging students to participate in STEM. The qualitative …


Synergy Of The Developed 6d Bim Framework And Conception Of The Nd Bim Framework And Nd Bim Process Ontology, Shawn Edward O'Keeffe Dec 2013

Synergy Of The Developed 6d Bim Framework And Conception Of The Nd Bim Framework And Nd Bim Process Ontology, Shawn Edward O'Keeffe

Dissertations

The author developed a unified nD framework and process ontology for Building Information Modeling (BIM). The research includes a framework developed for 6D BIM, nD BIM, and nD ontology that defines the domain and sub-domain constructs for future nD BIM dimensions. The nD ontology defines the relationships of kinds within any new proposed dimensional domain for BIM. The developed nD BIM framework and ontology takes into account the current 2D-5D BIM dimensions. There is a synergy between the 6D and nD framework that allows the nD framework and ontology to be utilized as a unified template for future dimensional development. …


Polarographic Determination Of Germanium, Calvin Leo Stevenson May 1953

Polarographic Determination Of Germanium, Calvin Leo Stevenson

Bachelors Theses and Reports, 1928 - 1970

In the past germanium has been determined by either wet methods or by the spectograph; the spectograph being used for the determination of very small amounts of ger­manium and wet methods used when more than one hundredth of one percent germanium is present. Both of these analyti­cal schemes have weaknesses.


A Study Of The Effects Of The Chloride Ion On The Lead-Silver Anodes And On The Lead Tenor Of The Zinc Deposit In Zinc Electrolysis, William A. Mitchell May 1953

A Study Of The Effects Of The Chloride Ion On The Lead-Silver Anodes And On The Lead Tenor Of The Zinc Deposit In Zinc Electrolysis, William A. Mitchell

Bachelors Theses and Reports, 1928 - 1970

The electrolyte used in the commercial production of electrolytic zinc from zinc sulphate solutions contains small amounts of impurities each of which has its own effects upon the process. Impurities such as antimony, cobalt, nickel, and iron tend to lower the current efficiency while other impurities such as chlorine, fluorine, and nitrates tend to increase the corrosion of the lead anodes and thereby increase the lead tenor of the zinc deposit.