Engineering Commons^™

Design And Predicting Performance Of Carbon Nanotube Reinforced Cementitious Materials : Mechanical Properties And Dispersion Characteristics., Mahyar Ramezani

Electronic Theses and Dissertations

Recently, Carbon Nanotubes (CNTs) are drawing considerable attention of researchers for reinforcing cementitious materials due to their excellent mechanical properties and high aspect ratio (length-to-diameter ratio). However, CNTs might not disperse well within the cement matrix, resulting in little improvement or even degradation of concrete properties. The uncertainty in producing the consistent results in different studies might be attributed to multiple interactions between the experimental variables affecting the nanotube dispersion and the final properties of CNT-cement nanocomposites. Therefore, this research mainly focused on proposing equations that can reliably capture these interactions in order to correlate CNT dispersion with the mechanical …

Spiderworms: Using Silkworms As Hosts To Produce A Hybrid Silkworm-Spider Silk Fiber, Ana Laura Licon

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

Spider silk has received significant attention due to its fascinating mechanical properties. Given the solitary and cannibalistic behavior of spiders, spider silk farming is impractical. Unlike spiders, silkworms are capable of producing large quantities of a fibrous product in a manner mimetic to spiders, and there already exists an industry to process cocoons into threads and textiles for many applications. The combination of silk farming (sericulture), a millennia old practice, and modern advancements in genetic engineering has given rise to an innovative biomaterial inspired by nature; transgenic silkworm silk.

This project focuses on the creation of chimeric silkworm-spider silk fibers …

Predicting The Mechanical Properties Of Nanocomposites Reinforced With 1-D, 2-D And 3-D Nanomaterials, Scott Edward Muller

Graduate Theses and Dissertations

Materials with features at the nanoscale can provide unique mechanical properties and increased functionality when included as part of a nanocomposite. This dissertation utilizes computational methods at multiple scales, including molecular dynamics (MD) and density functional theory (DFT), and the coupled atomistic and discrete dislocation multiscale method (CADD), to predict the mechanical properties of nanocomposites possessing nanomaterials that are either 1-D (carbyne chains), 2-D (graphene sheets), or 3-D (Al/amorphous-Si core-shell nanorod).

The MD method is used to model Ni-graphene nanocomposites. The strength of a Ni-graphene nanocomposite is found to improve by increasing the gap between the graphene sheet and a …

Influence Of Mechanical Properties Of Paper Coating On The Crack At The Fold Problem, Seyyed Mohammad Hashemi Najafi

Electronic Theses and Dissertations

Paper coating layers are subject to various stresses and deformations in many converting processes such as calendering, printing, slitting, and folding of the paper. In some cases, products may crack during folding to generate a defect called cracking at the fold (CAF). The parameters that influence these defects are not well understood. The overall goal of this thesis is to better understand the CAF behavior as related to material properties of the coating layer.

A method was developed to produce free-standing pigmented coating layers thick enough to be tested in bending as well as tension. The mechanical properties of these …

Mechanical Characterization And Fracture Behavior Of Magnesium Zk60a Alloy (Uns M16600), Mohamed Kamal I. H. Temraz

Theses

This research work focuses on studying the mechanical and fracture behavior of one of magnesium ZK60A (UNS M16600) extrusion. The material has many industrial applications and its characteristic should be measured for proper component or system design. Several tests were conducted following the standard procedures to determine the mechanical characteristics of the material. In addition, the fracture toughness of the material has been measured using the fracture toughness-thickness curve. A stress intensity factor K was used as a fracture parameter to determine the plane strain fracture toughness KIC of ZK60A magnesium alloy using a single edge notch bend (SENB) specimen …

A Study On Ultrasonic Energy Assisted Metal Processing : Its Correeltion With Microstructure And Properties, And Its Application To Additive Manufacturing., Anagh Deshpande

Electronic Theses and Dissertations

Additive manufacturing or 3d printing is the process of constructing a 3-dimensional object layer-by-layer. This additive approach to manufacturing has enabled fabrication of complex components directly from a computer model (or a CAD model). The process has now matured from its earlier version of being a rapid prototyping tool to a technology that can fabricate service-ready components. Development of low-cost polymer additive manufacturing printers enabled by open source Fused Deposition Modeling (FDM) printers and printers of other technologies like SLA and binder jetting has made polymer additive manufacturing accessible and affordable. But the metal additive manufacturing technologies are still expensive …

Tissue Equivalent Gellan Gum Gel Materials For Clinical Mri And Radiation Dosimetry, Pawel Brzozowski

Electronic Thesis and Dissertation Repository

Hydrogels contain high amount of water allowing their use as surrogates to human tissues with specific properties that can be tuned by additives. Gellan gum is a gel-forming material of interest and is a replacement for other common gelling agent with limited use as a tissue phantom. Therefore, this thesis examines the application of gellan gum gels as a novel magnetic resonance imaging (MRI) phantom with a design of experiments model to obtain tunable properties. The analysis was extended to include mechanical and electrical properties with a separate design of experiment. Gels doped with synthesized superparamagnetic iron oxide nanoparticles (SPIONs) …

Sintering Behavior, Structural, And Catalytic Properties Of Ytterbium Oxide (Yb2o3), Alina Aftab

Honors Undergraduate Theses

Ytterbia (Yb₂O₃) is an oxide ceramic, whose magnetic properties and crystal structure were studied to some extent in the past. However, the information on Yb₂O₃'s catalytic properties is lacking. Therefore, in this work, the sintering behavior and catalytic properties of Yb₂O₃ were examined. Yb₂O₃ ceramic samples were made using pressureless sintering of the commercially available Yb₂O₃ with 99.99% purity powder. The powder was first uniaxially pressed at 20 MPa in a steel die followed by pressureless sintering at different temperatures of 900 ⁰C …

Increasing Mechanical Properties Of A Double Network Hydrogel From Polyacrylamide And Agar With Methylenebisacrylamide As A Photocrosslinker, Madelyn Jeske

Williams Honors College, Honors Research Projects

Double Network hydrogels are three dimensional networks of a soft, mechanically tough material that have been used for drug delivery, agriculture, adhesives, and other widely applicable uses. Using the one-pot method, a single hydrogel can be produced in 3 hours as opposed to the once demonstrated three days. It has been found that with a first, physically cross linked network and a second, chemically cross linked, hybrid double network hydrogels exhibit high mechanical properties and are freeshapeable. Agar is a thermoreversible organic molecule with a triple helix structure that provides an excellent first network that organizes into aggregate bundles once …

Development Of Cardanol-Based Epoxy Coating, Nicholas Pottschmidt

Williams Honors College, Honors Research Projects

The purpose of this project was to determine the suitability of cardanol glycidyl ether (CGE) as a substitute for trimethylolpropane triglycidyl ether (TMPGE) as the reactive diluent in epoxy coatings. CGE may be a naturally-derived alternative to TMPGE, which is a commonly-used petroleum-derived reactive diluent. Epoxy coatings were formulated with CGE replacing increasing amounts of TMPGE in the formulation. Corrosion protection provided by the coatings was evaluated with electrochemical impedance spectroscopy (EIS). Mechanical properties of the coatings (hardness, flexibility, adhesion, and impact resistance) were evaluated with applicable ASTM standards.

EIS results revealed the coating formulated with only CGE had superior …

Development Of Stage-I Tempered High Strength Cast Steel For Ground Engaging Tools, Viraj Ashok Athavale

Doctoral Dissertations

"Ground Engaging Tools (GET) are the expendable replacement parts used in heavy machinery used with mining or construction equipment. GET’s protect the expensive machine components from the wear and tear found common in high-impact or high-abrasion environments. The goal of this project is to develop advanced next-generation alloy choices that outperforms the existing GET materials. A method of predicting tempered hardness of mixed microstructures was formulated. Using this model, two alloy series viz. Cr-Ni-Mo and Mn-Si-Mo-V were proposed and experimented with the goal of obtaining a high strength and impact resistant cast steel. Cast iterations of Cr-Ni-Mo alloy series were …

Processing And Properties Of Multifunctional Two-Dimensional Nanocomposite Based On Single Wall Carbon Nanotubes, Ali M. Al Mafarage

Browse all Theses and Dissertations

Truly single layer (monolayer) films of unmodified zigzag single-walled carbon nanotubes by using the Langmuir-Blodgett (LB) technique have been processed successfully. Measurements of their mechanical and optoelectric properties were achieved. Different theoretical equations were used based on the results obtained from the experimental part to study the properties and structures of the produced material and their composite. The produced films were highly oriented as determined by polarized Raman spectroscopy and as shown by scanning tunneling microscopy (STM). The films have a significant amount of flexibility which makes their behavior similar to rubbery materials. They can also be deposited on different …