Engineering Commons^™

Chemically Enhanced Primary Treatment Processes For Wastewater Resource Redirection And Its Impact On Downstream Processes, Tianchen Dong

Electronic Thesis and Dissertation Repository

There is a recent focus within the global wastewater industry on the steps being taken by treatment facilities to move towards net zero, or in some cases, energy positive operation. As part of maximizing energy recovery from the incoming wastewater, there has been increased attention upon the energy contained in the wastewater, and maximizing the redirection of more carbon captured through the primary treatment process rather than conventional removal through carbon oxidation. The chemically enhanced primary treatment (CEPT) process is a promising method for carbon redirection and improving the performance and efficiency of wastewater treatment processes. This research was conducted …

Large-Scale Non-Linear Dynamic Optimization For Combining Applications Of Optimal Scheduling And Control, Logan Daniel Beal

Theses and Dissertations

Optimization has enabled automated applications in chemical manufacturing such as advanced control and scheduling. These applications have demonstrated enormous benefit over the last few decades and continue to be researched and refined. However, these applications have been developed separately with uncoordinated objectives. This dissertation investigates the unification of scheduling and control optimization schemes. The current practice is compared to early-concept, light integrations, and deeper integrations. This quantitative comparison of economic impacts encourages further investigation and tighter integration. A novel approach combines scheduling and control into a single application that can be used online. This approach implements the discrete-time paradigm from …

Optimization-Based Spatial Positioning And Energy Management For Unmanned Aerial Vehicles, Ronald Abraham Martin

Theses and Dissertations

This research applies techniques from the field of optimization to spatial positioning and energy management in Unmanned Aerial Vehicles (UAVs). Two specific areas are treated: optimization of UAV view plans for 3D modeling of infrastructure, and trajectory optimization of solar powered high-altitude long-endurance (HALE) UAVs. Structure-from-Motion (SfM) is a computer vision technique for creating 3D models from 2D images. View planning is the process of planning image sets that will effectively model a given scene. First, a genetic algorithm based view planning approach is demonstrated. A novel terrain simulation environment is developed, and the algorithm is tested at multiple sites …

Internal Deformation Measurements And Optimization Of Synthetic Vocal Fold Models, Cassandra Jeanne Taylor

Theses and Dissertations

Developing lifelike vocal fold models is challenging due to various associatedbiomechanical complexities. Nevertheless, the development and analysis of improved vocal foldmodels is worthwhile since they are valuable tools for gaining insight into human vocal foldvibratory, aerodynamic, and acoustic response characteristics. This thesis seeks to contribute tothe development of computational and physical vocal fold modeling in two ways. First is byintroducing a method of obtaining internal deformation fields within vibrating synthetic vocal foldmodels; second is by presenting an optimization algorithm coupled with a computational vocalfold model to optimize geometry and stiffness of a synthetic vocal fold model to achieve morerealistic vibration …

Numerical Simulation And Optimization Of Blalock-Taussig Shunt, Thomas Hess, Ramesh K. Agarwal

McKelvey School of Engineering Theses & Dissertations

The goal of this study is to create an optimized Blalock-Taussig shunt used to temporarily repair pulmonary vascular blockages allowing a child time to grow so a more permanent surgical repair of the heart and vasculature can be performed. Blalock-Taussig or BT shunts are a surgical procedure performed on infants suffering from cyanosis or “Blue Baby Syndrome.” A BT shunt is an artificial vessel placed between the right ventricle and the pulmonary artery to increase blood flow in the lung and blood oxygen saturation levels. In a study of 96 patients with currently in use modified BT shunts, 32 patients …

Scalable Stochastic Reachability: Theory, Computation, And Control, Abraham Puthuvana Vinod

Electrical and Computer Engineering ETDs

Guaranteeing safety and performance are crucial components in any control system, and particularly relevant in light of growing interest in reliable autonomy. In safety-critical applications like biomedical devices, spacecraft applications, and self-driving cars, the cost of failure can be severe. Verification provides these guarantees by characterizing the ``good'' initial states or configurations from which a state can be driven to remain within a collection of pre-specified safe sets, while respecting the system dynamics, bounds on control authority, and additive uncertainties. We also wish to design controllers to achieve this objective. This dissertation proposes novel theory and scalable algorithms for tractable …

A Cost Benefit Analysis Of Using A Battery Energy Storage System (Bess) Represented By A Unit Commitment Model, Nemanja Mihailovic

USF Tampa Graduate Theses and Dissertations

This thesis aims to provide a general overview of a cost and benefit analysis of incorporating a battery energy storage system within unit commitment model.

The deregulation of the electricity market in the U.S. has only been around for the last two decades. With renewable energy and energy storage systems becoming less expensive, a decentralized market scheme is becoming more popular and plausible. The scope of this work is to provide a fundamental understanding of unit commitment and a cost analysis of applying a battery energy storage system to an already established power system.

A battery energy storage system (BESS) …

Operational Squadron Scheduling, Khaled A. Almannaei

Theses and Dissertations

The 28th Operational Weather Squadron (28th OWS) is responsible for producing and disseminating mission planning and execution weather analyses and forecasts. The squadron must prepare schedules that meet the needs of their mission while dealing with real-world constraints such as time windows, task priorities, and intermittent recurring missions. The 28th OWS's manning consists of active duty, deployed in-place, reserve, civilian and contract personnel. In this research, a scheduling model and algorithm are provided as an approach to crew scheduling for the 28th Operational Weather Squadron. Scheduling in the 28th OWS is complex and can be time consuming. This model will …

Design Of Wind Turbine Tower Height And Blade Length: An Optimization Approach, Ryan Wass

Mechanical Engineering Undergraduate Honors Theses

The wind industry is a fast growing market and is quickly becoming competitive with traditional non-renewable energy resources. As with any developing industry, research must continually be redefined as more complex understandings of design variables are learned. Optimization studies are common ways to quickly refine design variable selections. Historical wind turbine data shows that the tower hub height to rotor diameter ratio scales almost linearly. However there is no specific rule that dictates the optimum hub height for a given diameter. This study addresses this question by using an Excel based optimization program to determine the height to diameter ratio …

Simplex Control Methods For Robust Convergence Of Small Unmanned Aircraft Flight Trajectories In The Constrained Urban Environment, Michael D. Zollars

Theses and Dissertations

Constrained optimal control problems for Small Unmanned Aircraft Systems (SUAS) have long suffered from excessive computation times caused by a combination of constraint modeling techniques, the quality of the initial path solution provided to the optimal control solver, and improperly defining the bounds on system state variables, ultimately preventing implementation into real-time, on-board systems. In this research, a new hybrid approach is examined for real-time path planning of SUAS. During autonomous flight, a SUAS is tasked to traverse from one target region to a second target region while avoiding hard constraints consisting of building structures of an urban environment. Feasible …

Efficient Incorporation Of Fatigue Damage Constraints In Wind Turbine Blade Optimization, Bryce Taylor Ingersoll

Theses and Dissertations

Improving the wind turbine blade design has a significant effect on the efficiency of the wind turbine. This is a challenging multi-disciplinary optimization problem. During the blade design process, the aerodynamic shapes, sizing of the structural members, and material composition must all be determined and optimized. Some previous blade design methods incorporate the wind turbine's static response with an added safety factor to account for neglected dynamic effects. Others incorporate the dynamic response, but in general is limited to a few design cases. By not fully incorporating the dynamic response of the wind turbine, the final turbine blade design is …

Developing Optimization Techniques For Logistical Tendering Using Reverse Combinatorial Auctions, Jennifer Kiser

Electronic Theses and Dissertations

In business-to-business logistical sourcing events, companies regularly use a bidding process known as tendering in the procurement of transportation services from third-party providers. Usually in the form of an auction involving a single buyer and one or more sellers, the buyer must make decisions regarding with which suppliers to partner and how to distribute the transportation lanes and volume among its suppliers; this is equivalent to solving the optimization problem commonly referred to as the Winner Determination Problem. In order to take into account the complexities inherent to the procurement problem, such as considering a supplier’s network, economies of scope, …

Sequence-Based Simulation-Optimization Framework With Application To Port Operations At Multimodal Container Terminals, Mariam Aladdin Kotachi

Engineering Management & Systems Engineering Theses & Dissertations

It is evident in previous works that operations research and mathematical algorithms can provide optimal or near-optimal solutions, whereas simulation models can aid in predicting and studying the behavior of systems over time and monitor performance under stochastic and uncertain circumstances. Given the intensive computational effort that simulation optimization methods impose, especially for large and complex systems like container terminals, a favorable approach is to reduce the search space to decrease the amount of computation.

A maritime port can consist of multiple terminals with specific functionalities and specialized equipment. A container terminal is one of several facilities in a port …

Process Improvement At "The Manse On Marsh", Kevin C. Manko

Industrial and Manufacturing Engineering

The Manse on Marsh is an independent and assisted living facility that prides itself on providing life-enriching care for the elderly. Considering that the staff is essential to supply this care and turnover rates are a constant factor, the company would like to reduce the time it takes to hire new employees by at least one week. To facilitate this goal, process flow maps are utilized to assess the current state of the hiring process and metrics are applied to support future state design decisions. After performing a value added analysis and identifying areas of waste, a total of 20 …

Healing Alternatives Workspace Remodel, Lissandra Ilcyn, Jenifer Astrid Colmenares, Grace E. Kuffner

Industrial and Manufacturing Engineering

Healing Alternatives is an acupuncture office space located in a repurposed house in San Luis Obispo. Healing Alternatives’ current facility layout does not allow for an additional treatment room or the space to provide additional services because of the wasted space within the facility. Furthermore, patients can be disrupted by noise outside the treatment room causing a negative customer experience. The project team’s objectives are to:

o Design two layout alternatives

o Provide a time estimate for each alternative

o Provide a cost analysis of each alternative

o Implement 5s methodology on the storage room

o Provide a 2D-3D model …

Vial Of Life Redesign, Andrew Scott Heim, Marisonn Manalo

Industrial and Manufacturing Engineering

Cambria Anonymous Neighbors (CAN), a nonprofit organization assisting the residences of Cambria, hopes to standardize first responder procedures and make medical information easily accessible in case of a medical emergency. Currently the container costs $3.78. CAN would like to provide 2000 containers at a lower cost. After researching materials, acrylic was found to be the best option for the container material due to its low cost and durability. A laser cutter was used to cut the acrylic pieces, and then a set of step by step instructions were created to assemble the product. To reduce the cost of acrylic, the …

Optimization Of Superhydrophobic Surface Production Using Ambient-Dried Silica-Based Aerogels, Elizabeth Donlon

Honors Theses

Superhydrophobic surfaces exhibit particular properties that make them functional in various anti-sticking, anti-contamination, self-cleaning and drag reduction applications. Though such surfaces are found in nature - most notably the lotus leaf - they are difficult to produce. There are numerous methods and techniques for fabricating superhydrophobic surfaces. One such method is the sol-gel method, in which aerogel, a highly porous and lightweight material that can be made hydrophobic or superhydrophobic, is coated onto a surface. The purpose of this project is to devise a simple and repeatable procedure for making hydrophobic silica aerogel coatings that can be used for drag …

Evaluating The Practices Of A Small Business: A Case Study, Madeleine Anne Bernadicou

Construction Management

Companies are in constant search to increase profits. The company success is dependent on its standard operational procedures, otherwise known as SOP. Golden State Irrigation and Noack Pump is a non-union merit shop contractor that performs irrigation work in the California’s central valley. This paper researches the utilized methods of the company to see if it is operating at an optimal level. The methodology used in this project is a case study, where multiple jobs, income statements, and cash flows were analyzed, along with conducted interviews. Both qualitative and quantitative data were collected in the investigation of this case study. …

From Geographically Dispersed Data Centers Towards Hierarchical Edge Computing, Abbas Kiani

Dissertations

Internet scale data centers are generally dispersed in different geographical regions. While the main goal of deploying the geographically dispersed data centers is to provide redundancy, scalability and high availability, the geographic dispersity provides another opportunity for efficient employment of global resources, e.g., utilizing price-diversity in electricity markets or utilizing locational diversity in renewable power generation. In other words, an efficient approach for geographical load balancing (GLB) across geo-dispersed data centers not only can maximize the utilization of green energy but also can minimize the cost of electricity. However, due to the different costs and disparate environmental impacts of the …

Methods For The Aerostructural Design And Optimization Of Wings With Arbitrary Planform And Payload Distribution, Jeffrey D. Taylor

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

The design of an aircraft wing often involves the use of mathematical methods for simultaneous aerodynamic and structural design. The goal of many of these methods is to minimize the drag on the wing. A variety of computer models exist for this purpose, but some require the use of expensive time and computational resources to give meaningful results. As an alternative, some mathematical methods have been developed that give reason ably accurate results without the need for a computer. However, most of these methods can only be used for wings with specific shapes and payload distributions. In this thesis, a …

Assessment And Optimization Of Environmental Systems Using Data Analysis And Simulation., Milad Ebrahimi

Electronic Theses and Dissertations

For most environmental systems, specifically wastewater treatment plants and aquifers, a significant number of performance data variables are attained on a time series basis. Due to the interconnectedness of the variables, it is often difficult to assess over-arching trends and quantify temporal operational performance. The objective of this research study was to provide an effective means for comprehensive temporal evaluation of environmental systems. The proposed methodology used several multivariate data analyses and statistical techniques to present an assessment framework for the water quality monitoring programs as well as optimization of treatment plants and aquifer systems. The developed procedure considered the …

Optimizing The Distributed Hydrology Soil Vegetation Model For Uncertainty Assessment With Serial, Multicore And Distributed Accelerations, Andrew Adriance

Master's Theses

Hydrology is the study of water. Hydrology tracks various attributes of water such as its quality and movement. As a tool Hydrology allows researchers to investigate topics such as the impacts of wildfires, logging, and commercial development. With perfect and complete data collection researchers could answer these questions with complete certainty. However, due to cost and potential sources of error this is impractical. As such researchers rely on simulations.

The Distributed Hydrology Soil Vegetation Model(also referenced to as DHSVM) is a scientific mathematical model to numerically represent watersheds. Hydrology, as with all fields, continues to produce large amounts of data …

Class A Average Handle Time Standard, Stephanie Lee

Senior Design Project For Engineers

This report provides an analysis and evaluation on the Average Handle Time performed at Class A. The Universal, Shipping, International, Tracking, InfoNotice, Amazon, Field Support Group, and Preferred Customer Associates call types are evaluated in this study. An Average Handle Time Standard is created, while meeting the appropriate sample size, covering multiple site locations, at various times of the day and days of the week, and meeting corporate quality expectations. Methods of cost analysis, Six Sigma, and optimization are utilized in this study. The V-Process Model is used to verify the system. The implementation and results served as the verification …

Maintaining And Controlling An Extrinsic Biofilm For Pathogen Removal In Dental Unit Water Lines, Bilal B. Al-Bataina

Electronic Thesis and Dissertation Repository

The control of biofilm formation is a major concern for industrial, environmental, and public health. Undesirable biofilms can harbor different disease-causing pathogens and shorten the operational life of different equipment. On the other hand, beneficial biofilms are also used in various applications and managing its growth and activity can be desirable. Killing the biofilm does not usually incorporate the removal of the dead biofilm structure that is adhered to the surface. Therefore, the aim of this thesis is to control biofilm formation; to be able to remove, inhibit, and enhance biofilm formation. This thesis investigated the use of norspermidine, D-amino …

Design For Sustainability Through A Life Cycle Assessment Conceptual Framework Integrated Within Product Lifecycle Management, Renpeng Zou

Masters Theses

The need to include sustainable design principles during product realization poses several challenges in need of research. The demand for greener products has increased while competition has shortened product realization processes. Product Lifecycle Management (PLM) provides solutions in accelerating the development process and time to market by managing the information through a full life cycle of a product line. Life Cycle Assessment (LCA) provides a way to predict the environmental impacts that should be expected over the complete life cycle of a given product, but LCA methods are not well suited to efficient comparison of product alternatives during early design …

Multitarget Joint Delay And Doppler Shift Estimation In Bistatic Passive Radar, Mohammed Rashid

LSU Master's Theses

Bistatic passive radar (BPR) system does not transmit any electromagnetic signal unlike the active radar, but employs an existing Illuminator of opportunity (IO) in the environment, for instance, a broadcast station, to detect and track the targets of interest. Therefore, a BPR system is comprised of two channels. One is the reference channel that collects only the IO signal, and the other is the surveillance channel which is used to capture the targets' reflected signals. When the IO signal reflected from multiple targets is captured in the surveillance channel (SC) then estimating the delays and Doppler shifts of all the …

Defender-Assisted Evasion And Pursuit Maneuvers, Roger S. Anderson

Theses and Dissertations

Motivated by the possibilities afforded by active target defense, a 3-agent pursuit-evasion differential game involving an Attacker/Pursuer, a Target/Evader, and a Defender is considered. The Defender strives to assist the Target by intercepting the Attacker before the latter reaches the Target. A barrier surface in a reduced state space separates the winning regions of the Attacker and Target-Defender team. In this thesis, attention focuses primarily on the Attacker's region of win where, under optimal Attacker play, the Defender cannot preclude the Attacker from capturing the Target. Both optimal and suboptimal strategies are investigated. This thesis uses several methods to breakdown …

Scheduling Tool For The Nevada Test And Training Range, Miguel J. Macias

Theses and Dissertations

Presently, the 57th Wing Scheduler at Nellis AFB schedules daily mission requests to the Nevada Test and Training Range (NTTR) airspace manually. The process is time consuming and may lead to suboptimal range resource allocations. The goal of this study is to provide the scheduler with an automated scheduling approach that will improve range scheduling efficiency. The tool developed uses range request data from units at Nellis AFB to produce daily mission schedules for a month long scheduling horizon with Microsoft VBA code and a commercial Integer Program (IP) solver. Under our current understanding of scheduler priorities, we formulate the …

Optimization Of A New Array Noise Tool; Analysis & Interpretation Of Case Studies Of Down- Hole Leak Detection, Moustafa Mahmoud Hassan Ismail

Theses

This thesis is concerned with the optimization and analysis of new array noise tools. Various lab and field case studies are analyzed to test the capabilities and determine the optimum operating conditions of the new tool for leak detection purposes. The purpose of this study is to optimize the logging procedure of real-time array noise tool, selecting adequate gain parameters and frequency band in the processing phase, and to analyze the data acquired through multiple labs and field tests. The study methodology involved the following steps:

1. Performing lab and field tests for the tool in a range of different …

Modular Product Architecture’S Decisions Support For Remanufacturing-Product Service System Synergy, Johnson Adebayo Fadeyi

Wayne State University Dissertations

Remanufacturing is identified as the most viable product end-of-life (EOL) management strategy. However, about 80% of manufactured products currently end up as wastes. Besides other benefits, the product service system (PSS) could curtail the main bottlenecks to remanufacturing namely quantity, quality, recovery time of used product, and negative perception of remanufactured products. Therefore, the integration of PSS and remanufacturing has been increasingly recommended as an enhanced product offering. However, an integration that is informed by mathematical analysis is missing. Meanwhile, the variables that bolster the performance of PSS and remanufacturing are substantially influenced by product development (PD) decisions. Among the …