Engineering Commons^™

Multiscale Modeling Of Electrolytes For Energy Storage And Conversion, Fatemeh Sepehr

Doctoral Dissertations

Fuel cells, redox flow batteries, and secondary ion batteries are under active investigation to fulfill the requirements of efficient and sustainable energy storage and conversion technologies. The discovery of high-performance stable electrolytes that are relatively cheap and versatile is crucial to the commercialization of these electrochemical devices and necessitates a comprehensive understanding of the materials (i.e., from the atomistic to continuum levels). This dissertation is on multiscale modeling and simulations of several electrolytes under consideration in vanadium redox flow batteries (VRFBs), alkaline fuel cells (AFCs), or secondary magnesium batteries.

The hydrated structure and associated solvation Gibbs energies were determined for …

Adaptive Sampling Trust-Region Methods For Derivative-Based And Derivative-Free Simulation Optimization Problems, Sara Shashaani

Open Access Dissertations

We consider unconstrained optimization problems where only “stochastic” estimates of the objective function are observable as replicates from a Monte Carlo simulation oracle. In the first study we assume that the function gradients are directly observable through the Monte Carlo simulation. We propose ASTRO, which is an adaptive sampling based trust-region optimization method where a stochastic local model is constructed, optimized, and updated iteratively. ASTRO is a derivative-based algorithm and provides almost sure convergence to a first-order critical point with good practical performance. In the second study the Monte Carlo simulation is assumed to provide no direct observations of the …

Sensitivity Analysis Of Geometry Changes In The Simulation Of Basilar Aneurysms, Paul Eserkaln

Theses and Dissertations

Computer simulation is a useful tool in the research and treatment of basilar aneurysms. Current technology allows researchers to create 3D models from cerebral vasculature in-vivo, allowing for the investigation of surgical options with minimal risk to the patient. The method used to construct these models overlooks smaller lateral arterial branches which are difficult to discern due to resolution limits of the imaging process. These lateral branches have minimal impact on the overall blood flow through the basilar artery, but they play a significant role in the health of the patient, so it is important to ensure sufficient blood will …

Simulation Modeling For Energy Consumption Of Residential Consumers In Response To Demand Side Management., Prajwal Khadgi

Electronic Theses and Dissertations

Energy efficiency in the electricity distribution system continues to gain importance as demand for electricity keeps rising and resources keep diminishing. Achieving higher energy efficiency by implementing control strategies and demand response (DR) programs has always been a topic of interest in the electric utility industry. The advent of smart grids with enhanced data communication capabilities propels DR to be an essential part of the next generation power distribution system. Fundamentally, DR has the ability to charge a customer the true price of electricity at the time of use, and the general perception is that consumers would shift their load …

Formation Flight For Fuel Saving In Coronet Missions Of Kc-135r And F-15c/E, Christopher Allen Kniffin

Mechanical and Aerospace Engineering Theses

The fuel saving benefit of formation flight has been demonstrated through theoretical and computational analyses, simulation, wind tunnel and flight tests. When an aircraft flies in a specific region in the wake of another aircraft, it experiences upwash, which results in reduced drag and thus reduced thrust requirement. One specific USAF mission that can potentially benefit from formation flight is coronet missions. In a coronet mission, fighter aircraft are escorted and refueled, as needed, by tanker aircraft over a long range. During the flight, the receiver aircraft fly in formation with the tanker but outside of the wake of the …

Investigation Of Digital Pump/Motor Control Strategies, Farid El Breidi

Open Access Dissertations

A pump is the heart of fluid power systems, it has a significant impact on the efficiency of many fluid power systems. Motors are the most common rotary actuators in fluid power systems. State-of-the-art pump/motor units can achieve efficiencies higher than 90% when operating at maximum displacement; however, as the displacement drops, the efficiency of these units drops to below 50%. A new digital pump/motor design aims at increasing these efficiencies by utilizing two electrically controlled high speed on/off valves per displacement chamber; these valves provide the ability to achieve variable displacement and allow freedom in choosing operating strategies. Such …

An Application Of The Universal Verification Methodology, Rui Ma

Masters Theses

The Universal Verification Methodology (UVM) package is an open-source SystemVerilog library, which is used to set up a class-based hierarchical testbench. UVM testbenches improve the reusability of Verilog testbenches. Direct Memory Access (DMA) plays an important role in modern computer architecture. When using DMA to transfer data between a host machine and field-programmable gate array (FPGA) accelerator, a modularized DMA core on the FPGA frees the host side Central Processing Unit(CPU) during the transfer, helps to save FPGA resources, and enhances performance. Verifying the functionality of a DMA core is essential before mapping it to the FPGA. In this thesis, …

Modeling And Simulation Of 1700 V 8 A Genesic Superjunction Transistor, Staci E. Brooks

Graduate Theses and Dissertations

The first-ever 1.7kV 8A SiC physics-based compact SPICE model is developed for behavior prediction, modeling and simulation of the GeneSiC “Super” Junction Transistor. The model implements Gummel-Poon based equations and adds a quasi-saturation collector series resistance representation from a 1.2 kV, 6 A SiC bipolar junction transistor model developed in Hangzhou, China. The model has been validated with the GA08JT17-247 device data representing both static and dynamic characteristics from GeneSiC. Parameter extraction was performed in IC-CAP and results include plots showing output characteristics, capacitance versus voltage (C-V), and switching characteristics for 25 °C, 125 °C, and 175 °C temperatures.

Modeling Economic Impacts Of The Inland Waterway Transportation System, Furkan Oztanriseven

Graduate Theses and Dissertations

The inland waterway transportation system of the United States (U.S.) handles 11.7 billion tons of freight annually and connects the heartland of the U.S. with the rest of the world by providing a fuel-efficient and environmentally friendly mode of transportation. This dissertation aims to create decision support tools for maritime stakeholders to measure the economic impacts of the inland waterway transportation systems under real world scenarios including disruptions, demand changes, port expansion decisions, and channel deepening investments. Monte Carlo simulation, system dynamics, discrete-event simulation, agent-based modeling, and multiregional input-output modeling techniques are utilized to analyze the complex relationships between inland …

Investigation Of Exothermic Reaction Dynamics Via Computational Fluid Dynamics Coupled With A Feedback Controller, Siusan Choi

Mechanical and Aerospace Engineering Dissertations

The control of reaction temperature under continuous flow conditions is important in a variety of chemical manufacturing industries. For many reactions, operating at off-design temperatures can result in the production of undesired products, reduced feedstock conversion and, in some cases, reduced catalyst lifetime. In many exothermic reactions, maintaining a desired set point temperature at high reactant flow rates becomes challenging if the chemical kinetics exhibit highly non-linear behavior. In these situations, the interaction between commonly used linear controllers and the physical system can lead to unexpected dynamic response and undesired swings in reaction temperature. In this research, a computational model …

Characterization Of Impact Properties Of Forged, Layered, And Additive Manufactured Titanium Alloy, Melissa Kathryn Matthes

UNLV Theses, Dissertations, Professional Papers, and Capstones

New additive manufactured (AM) materials have the potential of optimizing the geometry and microstructure of complex components to enhance their structural integrity while creating them quickly. However, the behavior of AM materials under extreme dynamic loading conditions is not fully understood. This is especially important in many applications. For example, spacecraft components may be impacted by micrometeorites at hyper velocities of multiple kilometers per second, inducing extreme dynamic loading.

One type of AM material is created by melting and solidifying metal along a specified path. Depending on the geometry, additional streams will be deposited side-by-side. This process affects the microstructure …

Automatic Sleep Stages Classification, Maryam Zokaeinikoo

Masters Theses

In this thesis, we first develop an efficient automated classification algorithm for sleep stages identification. Polysomnography recordings (PSGs) from twenty subjects were used in this study and features were extracted from the time{frequency representation of the electroencephalography (EEG) signal. The classification of the extracted features was done using random forest classifier. The performance of the new approach is tested by evaluating the accuracy of each sleep stages and total accuracy. The results shows improvement in all five sleep stages compared to previous works.

Then, we present a simulation decision algorithm for switching between sleep interventions. This method improves the percentage …

Experimental And Numerical Evaluation Of A New Composite Pressure Pipe For A Trenchless Rehabilitation Technology, Xuanchen Yen

Doctoral Dissertations

The information presented in this dissertation is based on research work conducted at Trenchless Technology Center (TTC) at Louisiana Tech University. This work was performed through a contract with China University of Geoscience (CUG) for a gas company. China's gas pipelines need replacement or rehabilitation after 15 to 30 years of service. China's gas industry is looking for suitable techniques to transfer into their market.

When compared to conventional excavation pipeline renewal or replacement methods, there are obvious advantages of TRT for gas pipelines that can impact the triple bottom-line of economic, social and environmental benefits. An introduction of TRT …

Simulation, Measurement, And Emulation Of Photovoltaic Modules Using High Frequency And High Power Density Power Electronic Circuits, Yunas Erkaya

Electrical & Computer Engineering Theses & Dissertations

The number of solar photovoltaic (PV) installations is growing exponentially, and to improve the energy yield and the efficiency of PV systems, it is necessary to have correct methods for simulation, measurement, and emulation. PV systems can be simulated using PV models for different configurations and technologies of PV modules. Additionally, different environmental conditions of solar irradiance, temperature, and partial shading can be incorporated in the model to accurately simulate PV systems for any given condition.

The electrical measurement of PV systems both prior to and after making electrical connections is important for attaining high efficiency and reliability. Measuring PV …

A Simulation-Based Layered Framework Framework For The Development Of Collaborative Autonomous Systems, Ioannis Sakiotis

Computational Modeling & Simulation Engineering Theses & Dissertations

The purpose of this thesis is to introduce a simulation-based software framework that facilitates the development of collaborative autonomous systems. Significant commonalities exist in the design approaches of both collaborative and autonomous systems, mirroring the sense, plan, act paradigm, and mostly adopting layered architectures. Unfortunately, the development of such systems is intricate and requires low-level interfacing which significantly detracts from development time. Frameworks for the development of collaborative and autonomous systems have been developed but are not flexible and center on narrow ranges of applications and platforms. The proposed framework utilizes an expandable layered structure that allows developers to define …

The Development Of A Prosthetic Training Software For Upper Limb Amputees, Tyler Kayne Sullins

USF Tampa Graduate Theses and Dissertations

The purpose of this study was to develop an intuitive software that aids in the field of prosthetic training and rehabilitation by creating an individualized visualization of joint angles. This software is titled “the prosthetic training software (PTS) for individualized joint angle representation”, and it enables the individualized portrayal of predicted or pre-recorded joint angles. The PTS is an intuitive program for clinicians and prosthesis users that produces an animation of a virtual avatar reflecting the user’s segment lengths and amputation for rehabilitation and training purposes.

The PTS consists of a graphical user interface (GUI) and a 3D visualization of …

Sysml Based Cubesat Model Design And Integration With The Horizon Simulation Framework, Shaun Luther

Master's Theses

This thesis examines the feasibility of substituting the system input script of Cal Poly’s Horizon Simulation Framework (HSF) with a Model Based Systems Engineering (MBSE) model designed with the Systems Modeling Language (SysML). A concurrent student project, SysML Output Interface Creation for the Horizon Simulation Framework, focused on design of the HSF Translator Plugin which converts SysML models to an HSF specific XML format. A SysML model of the HSF test case, Aeolus, was designed. The original Aeolus HSF input script and the translated SysML input script retained the format and dependency structure required by HSF. Both input scripts …

Experimental And Modeling Studies In Membrane Distillation, Lin Li

Dissertations

A variety of microporous hydrophobic flat sheet membranes of polyvinylidene fluoride (PVDF) and expanded-polytetrafluoroethylene (e-PTFE) are studied to evaluate the influence of membrane properties on their performance in desalination by direct contact membrane distillation (DCMD) and vacuum membrane distillation (VMD) processes. The membrane thickness is varied between 23 μm to 125 μm; the pore size is varied from 0.05 μm to 0.45 μm. The porosity is generally high in the range of 0.7 - 0.8. DCMD experiments are performed over a hot brine temperature range of 65 °C to 85 °C and distillate temperature at 25 °C for various brine …

Energy Models Of The Txaire Houses, Tajudeen Amadu Annafi

Mechanical Engineering Theses

Model calibration is important as its functions improve building models. A calibrated model of the TxAIRE Houses #1 and #2 have been developed using the OpenStudio software. The model was developed and calibrated with data of the year 2014 but can be used predict electricity consumption of any year.

An actual meteorological year (AMY) weather file was also created for the houses which was used for calibration. The data used to develop this weather file were measured on-site which improved the accuracy of the model. It was found that an error difference of -1.0 % and -4.2 % occurred between …

Operational Decision Making For Medical Clinics Through The Use Of Simulation And Multi-Attribute Utility Theory., Bo Sun

Electronic Theses and Dissertations

Currently, health care is a large industry that concerns everyone. Outpatient health care is an important part of the American health care system and is one of the strongest growth areas in the health care system. Many people pay attention to how to keep basic health care available to as many people as possible. A large health care system is usually evaluated by many performance measures. For example, the managers of a medical clinic are concerned about increasing staff utilization; both managers and patients are concerned about patient waiting time. In this dissertation, we study decision making for clinics in …

Computational Analysis Of Impact Loading On Wafer Level Chip Scale Packages Mounted On Printed Circuit Boards Of Varying Thickness, Anik Mahmood

Mechanical and Aerospace Engineering Theses

In the electronic industry one of the popular package is Chip Scale Package (CSP) due to its small form factor and low cost. To meet the need of new functionality and portability of the recent devices, CSPs’ have been most favorable choice for a long time. On the other hand, with the miniaturization process of these portable devices there is a growing risk of drop impact failure in day to day use. It’s not only the mechanical loading that is affecting the reliability of these devices but also thermal and thermo-mechanical loads are acting simultaneously. To analyze and ensure the …

Model Based Vehicle Simulation For Electrically Actuated Transmission Test Cells, Kenneth L. Gruel

Masters Theses

The Eaton Vehicle Group is responsible for the development of a large family of automotive products, including manual and automated manual transmissions for light, medium, and heavy duty vehicles. To further expand the transmission testing capabilities at Vehicle Group headquarters, the Vehicle Simulator system was developed and integrated into an existing motor-based test cell. System development time and cost were reduced by leveraging readily available vehicle models and real-time hardware. The Vehicle Simulator system allows a user to control the speed and torque settings of the test cell motors in manual mode, or switch the motors to vehicle emulation mode. …

Enhancement Of Supercapacitor Energy Storage By Leakage Reduction And Electrode Modification, Tete Tevi

USF Tampa Graduate Theses and Dissertations

Supercapacitors have emerged in recent years as a promising energy storage technology. The main mechanism of energy storage is based on electrostatic separation of charges in a region at the electrode-electrolyte interface called double layer. Various electrode materials including carbon and conducting polymers have been used in supercapacitors. Also, supercapacitors offer high life cycle and high power density among electrochemical energy storage devices. Despite their interesting features, supercapacitors present some disadvantages that limit their competitivity with other storage devices in some applications. One of those drawbacks is high self-discharge or leakage. The leakage occurs when electrons cross the double layer …

A Simulation Model For Decision Support In Business Continuity Planning, Marissa Anne Mosunich

Master's Theses

Enterprises with a global supply network are at risk of lost revenue as a result of disruptive disasters at supplier locations. Various strategies exist for addressing this risk, and a variety of types of research has been done regarding the identification, assessment and response to the risk of disruption in a supply chain network.

This thesis establishes a decision model to support Business Continuity Planning at the first-tier supplier level. The decision model incorporates discrete-event simulation of supply chain networks (through Simio software), Monte Carlo simulation, and risk index optimization. After modeling disruption vulnerability in a supply chain network, costs …

Understanding Bulk Behavior Of Particulate Materials From Particle Scale Simulations, Xiaoliang Deng

Dissertations

Particulate materials play an increasingly significant role in various industries, such as pharmaceutical manufacturing, food, mining, and civil engineering. The objective of this research is to better understand bulk behaviors of particulate materials from particle scale simulations.

Packing properties of assembly of particles are investigated first, focusing on the effects of particle size, surface energy, and aspect ratio on the coordination number, porosity, and packing structures. The simulation results show that particle sizes, surface energy, and aspect ratio all influence the porosity of packing to various degrees. The heterogeneous force networks within particle assembly under external compressive loading are investigated …

Design & Analysis Of A Computer Experiment For An Aerospace Conformance Simulation Study, Ryan W. Gryder

Theses and Dissertations

Within NASA's Air Traffic Management Technology Demonstration # 1 (ATD-1), Interval Management (IM) is a flight deck tool that enables pilots to achieve or maintain a precise in-trail spacing behind a target aircraft. Previous research has shown that violations of aircraft spacing requirements can occur between an IM aircraft and its surrounding non-IM aircraft when it is following a target on a separate route. This research focused on the experimental design and analysis of a deterministic computer simulation which models our airspace configuration of interest. Using an original space-filling design and Gaussian process modeling, we found that aircraft delay assignments …

Understanding The Effect Of Extrusion Processing Parameters On Physical, Nutritional And Rheological Properties Of Soy White Flakes Based Aquafeed In A Single Screw Extruder, Sushil Kumar Singh

Electronic Theses and Dissertations

The rapid expansion of aquaculture has increased the demand for aquafeed. As fishmeal is expensive, alternative plant based protein sources such as soybean has shown to be a good alternative for aquafeed production. The present study was done to investigate the effect of soy white flakes (SWF) as an alternative source of protein in the production of aquaculture feed through extrusion processing. Ingredient blends containing different levels of SWF along with distiller dried grains, corn flour, corn gluten meal, fish meal, vitamin and mineral mix with net protein adjusted to 32% protein were formulated. The ingredient blends were extruded in …

Torque Accuracy Improvement Via Explicit Torque Feedback Control For Internal Combustion Spark Ignition Engines, Anwar Alkeilani

Wayne State University Dissertations

At the present time, both control and estimation accuracies of engine torque are causes for under-achieving optimal drivability and performance in today’s production vehicles. The major focus in this area has been to enhance torque estimation and control accuracies using existing open-loop torque control and estimation structures. Such an approach does not guarantee optimum torque tracking accuracy and optimum estimation accuracy due to air flow and efficiencies estimations errors. Furthermore, current approach overlooks the fast torque path tracking which does not have any related feedback. Recently, explicit torque feedback control has been proposed in the literature using either estimated or …

Modeling And Simulation Of Optical Properties Of Noble Metals Triangular Nanoprisms, Soad Zahir Alsheheri

Electronic Theses and Dissertations

Gold and silver has gained huge attention across the scientific community for its applications arising from its plasmonic properties. The optical properties achieved by these materials via excitation of plasmons is very unique to these materials and used as diagnostic and therapeutic agents in the field of medicine, and as sensors in a gamut of disciplines such as energy and environmental protection to name a few. Surface plasmon resonance (SPR) properties of the gold and silver are size and shape dependent. Of the various shapes reported in literature, triangular nanoprisms has tunable optical properties in the visible and near IR …

Rain Induced Runoff Simulation Using A 2d Numerical Model, Tahmina Shirmeen

Electronic Theses and Dissertations

Runoff plays an important role in the agricultural and urbanized environments. Surface runoff is determined primarily by the amount of precipitation and by infiltration characteristics related to soil type, soil moisture, antecedent rainfall, land cover type, impervious surfaces, and surface retention. In this study, CCHE2D, a numerical model for free surface flow hydrodynamics, is applied to study the rain induced runoff and channel flow mixed problems. The main goal of this study is to incorporate rainfall as an input into the existing free surface flow model, CCHE2D; to verify and validate the CCHE2D model’s runoff simulation capability using analytical solutions …