Engineering Commons^™

Algorithms And Methods For Optimizing The Spent Nuclear Fuel Allocation Strategy, Gordon Matthew Petersen

Doctoral Dissertations

Commercial nuclear power plants produce long-lasting nuclear waste, primarily in the form of spent nuclear fuel (SNF) assemblies. Spent fuel pools (SFP) and canisters or casks that sit at an independent spent fuel storage installation (ISFSI) at the reactor site store the fuel assemblies that are removed from operating reactors. The federal government has developed a plan to move the SNF from reactor sites to a Consolidated Interim Storage Facility (CISF) or a geological repository. In order to develop a predictable pick-up schedule and give utilities notice of an impending pickup from a reactor site, the federal government developed a …

Trajectory Optimization Using Indirect Methods And Parametric Scramjet Cycle Analysis, Joseph Williams

Open Access Theses

This study investigates the solution of time sensitive regional strike trajectories for hypersonic missiles. This minimum time trajectory is suspected to be best performed by scramjet powered hypersonic missiles which creates strong coupled interaction between the flight dynamics and the performance of the engine. Comprehensive engine models are necessary to gain better insight into scramjet propulsion. Separately, robust and comprehensive trajectory analysis provides references for vehicles to fly along. However, additional observation and understanding is obtained by integrating the propulsion model inside the trajectory framework. Going beyond curve fitted thrusting models, an integrated scramjet cycle analysis offers rapid trade studies …

Optimal Design Of Sound Absorbing Systems With Microperforated Panels, Nicholas Nakjoo Kim

Open Access Dissertations

As the development of technology makes economic prosperity and life more convenient, people now desire a higher quality of life. This quality of life is based not only on the convenience in their life but also on clean and eco-friendly environments. To meet that requirement, much research is being performed in many areas of eco-friendly technology, such as renewable energy, biodegradable content, and batteries for electronic vehicles.

This tendency is also obvious in the acoustics area, where there are continuing attempts to replace fiber-glass sound absorbers with fiber-free materials. The combination of microperfoated panels (MPP) (one of the fiber-free sound …

Optimization Models And Algorithms For Demand Response In Smart Grid., Guangyang Xu

Electronic Theses and Dissertations

For demand response in smart grid, a utility company wants to minimize total electricity cost and end users want to maximize their own utility. The latter is considered to consist of two parts in this research: electricity cost and convenience/comfort. We first develop a system optimal (SO) model and a user equilibrium (UE) model for the utility company and end users, respectively and compare the difference of the two. We consider users' possible preference on convenience over cost-saving under the real-time pricing in smart grid, and each user is assumed to have a preferred time window for using a particular …

Optimization Methodology For Cvt Ratio Scheduling With Consideration Of Both Engine And Cvt Efficiency, Steven Beuerle

Masters Theses

A transmission ratio schedule is developed to optimize the fuel consumption for an automotive continuously variable transmission (CVT) connected to an internal combustion engine (ICE). Although the optimal operating line (OOL) generated from an engine brake specific fuel consumption (BSFC) map can be used to generate a CVT ratio schedule that yields maximum engine efficiency, it was found that OOL-based CVT ratio scheduling does not necessarily offer the best fuel economy because optimal CVT efficiency does not always correspond to OOL tracking. To develop a CVT ratio schedule that can offer the best fuel economy, a novel ratio-scheduling methodology is …

A Genetic Algorithm Incorporating Design Choice For The Preliminary Design Of Unmanned Aerial Vehicles, Kenneth Michael Mull

Masters Theses

Unmanned Aerial Vehicles (UAVs) are currently at the forefront of aerospace technologies. The design of these aircraft is complex and often performance characteristics are coupled to multiple design attributes. At the early design phase both discrete and continuous design choices are present limiting the feasibility of traditional derivative based optimization techniques. In place of these methods, the design space can be explored using a genetic algorithm that mimics the process of natural selection, providing a capable and reliable base airframe constructed from the required performance metrics. By incorporating a genetic multidisciplinary optimization algorithm early in the conceptual design phase, aircraft …

Order Picking Strategies For Healthcare Warehouses., Ehsan Khodabandeh

Electronic Theses and Dissertations

Order picking is the process of collecting goods and items in specified quantities from storage locations, in response to customer orders. Since many labor resources are involved in this process, finding ways to make it more efficient have been a primary goal for researchers and practitioners. Determining a better allocation of products to the storage areas, finding the best route and sequence to pick multiple products, and choosing the best picking policies to minimize congestion in the aisles are just a few of many objectives regarding order picking process. Due to regulatory compliances and the chance of product spoilage, additional …

Improved 2d And 3d Resistivity Surveys Using Buried Electrodes And Optimized Arrays: The Multi-Electrode Resistivity Implant Technique (Merit), Henok Gidey Kiflu

USF Tampa Graduate Theses and Dissertations

This thesis presents a novel resistivity method called Multi-Electrode resistivity technique (MERIT) that is used for high resolution imaging of complex geologic features at depth and near the edges of survey lines. The MERIT electrodes are especially shaped and designed to be self-driven using a robust-direct push technique. Measurements are taken using optimized arrays that are generated using a modified version of the “Compare-R” optimization algorithm. This work focused on both two-dimensional (MERIT2D) and three-dimensional (MERIT3D) applications of the buried array and show the relevance of the additional information gained by the addition of deep electrodes especially in sites with …

Optimized Sizing And Placing Of Distributed Energy Resources (Ders) In An Island Microgrid Using Der-Cam, Bhuwan B. Bastola

Electrical and Computer Engineering ETDs

The electric grid at La Gomera, an island in the Canary archipelago, has been the subject of interest in optimized integration of Distributed Energy Resources (DERs) primarily because of high distribution losses and concerns about complying with emission regulations. Consequently, the utility that operates the island power system wishes to mitigate the problem with installation of renewable and distributed energy sources like PV and battery, which is the focus of this research.

Specifically, the focus of this thesis is to use Distributed Energy Resource - Customer Adoption Model (DER-CAM) to optimize the installation of PV and battery in terms of …

Co-Substrate Fermentation Of Jerusalem Artichoke Tubers And Crude Glycerol To Butanol With Integrated Product Recovery, Tahereh Sarchami

Electronic Thesis and Dissertation Repository

Butanol has long been considered a potential advanced liquid biofuel, in addition to its current application as an industrial solvent. It can be produced biologically; however, the conventional ABE fermentation suffers from many limitations, including low butanol titer, high cost of traditional raw materials, end-product inhibition and high butanol recovery costs. Possible solutions are the use of renewable low-cost feedstocks, genetic manipulations of Clostridia spp. to improve the strains’ butanol titer and tolerance, advanced fermentation techniques, and in-situ product recovery technologies.

In order to overcome some of these limitations, the overall goal of this thesis was to develop a process …

Optimization Of Headway, Stops, And Time Points Considering Stochastic Bus Arrivals, Liuhui Zhao

Dissertations

With the capability to transport a large number of passengers, public transit acts as an important role in congestion reduction and energy conservation. However, the quality of transit service, in terms of accessibility and reliability, significantly affects model choices of transit users. Unreliable service will cause extra wait time to passengers because of headway irregularity at stops, as well as extra recovery time built into schedule and additional cost to operators because of ineffective utilization of allocated resources.

This study aims to optimize service planning and improve reliability for a fixed bus route, yielding maximum operator’s profit. Three models are …

Achieving High Reliability And Efficiency In Maintaining Large-Scale Storage Systems Through Optimal Resource Provisioning And Data Placement, Lipeng Wan

Doctoral Dissertations

With the explosive increase in the amount of data being generated by various applications, large-scale distributed and parallel storage systems have become common data storage solutions and been widely deployed and utilized in both industry and academia. While these high performance storage systems significantly accelerate the data storage and retrieval, they also bring some critical issues in system maintenance and management. In this dissertation, I propose three methodologies to address three of these critical issues.

First, I develop an optimal resource management and spare provisioning model to minimize the impact brought by component failures and ensure a highly operational experience …

Efficient Employment Of Large Format Sensor Data Transfer Architectures, Jeffrey R. Oltmanns

Theses and Dissertations

Due to the increasing quantity of data collected by Air Force intelligence, surveillance and reconnaissance (ISR) assets and the focus on timely access to the data collected by these systems, operational data transfer network architectures have become a critical component of their employment in the intelligence production process. Efficient utilization of the provided long-haul communications component of the ISR system improves the value of the single asset to the warfighter and enables connectivity of additional assets via the data transfer network architecture. This research effort focused on the creation and implementation of a structured test design methodology based on the …

Soto's True Earth Market Optimization, Hironari Fujita, Wei Lin Luong, Sean Macwilliams

Industrial and Manufacturing Engineering

Soto’s True Earth Market is a new organic market startup which is located in a historical facility in the small town of Cambria. The new owner of Soto’s Andre Ponce has a vision to create a community revolved around local organic foods and sustainability. Since Soto’s is still in the initial startup phase there is a large amount of room for optimization and redesign in order to create a solid customer foundation. Andre presented several opportunities for improvement to the team. With a time constraint of solely two quarters the project team decided to provide the following:

● Old and …

Dynamic Liquefied Natural Gas (Lng) Processing With Energy Storage Applications, Farhad Fazlollahi

Theses and Dissertations

The cryogenic carbon capture™ (CCC) process provides energy- and cost-efficient carbon capture and can be configured to provide an energy storage system using an open-loop natural gas (NG) refrigeration system, which is called energy storing cryogenic carbon capture (CCC-ES™). This investigation focuses on the transient operation and especially on the dynamic response of this energy storage system and explores its efficiency, effectiveness, design, and operation. This investigation included four tasks.The first task explores the steady-state design of four different natural gas liquefaction processes simulated by Aspen HYSYS. These processes differ from traditional LNG process in that the CCC process vaporizes …

A General Framework Of Large-Scale Convex Optimization Using Jensen Surrogates And Acceleration Techniques, Soysal Degirmenci

McKelvey School of Engineering Theses & Dissertations

In a world where data rates are growing faster than computing power, algorithmic acceleration based on developments in mathematical optimization plays a crucial role in narrowing the gap between the two. As the scale of optimization problems in many fields is getting larger, we need faster optimization methods that not only work well in theory, but also work well in practice by exploiting underlying state-of-the-art computing technology.

In this document, we introduce a unified framework of large-scale convex optimization using Jensen surrogates, an iterative optimization method that has been used in different fields since the 1970s. After this general treatment, …

The Context Of Tool Control In An Aircraft Assembly Environment Related To Productivity, Taylor Jay Sisson

KSU Journey Honors College Capstones and Theses

The aircraft industry focuses a large portion of its resources on tool control during the assembly of aircraft. Tool control is a strict process that demands time from the assembly process. This time is removed from the value-added time spent actually assembling the aircraft. A study at Lockheed Martin conducted in the Spring of 2016 is discussed that examines the time spent on tool control. Tool control is necessary in aircraft assembly to prevent tools from entering compartments of the aircraft. If such an event occurs, the tool may damage the aircraft. All aircraft assembly processes must be tool controlled, …

Optimization And Modeling Of An Energy Harvesting Optical Micropropeller For Microfluidic Applications, Jacqueline Elwood

Nanoscale Science & Engineering (discontinued with class year 2014)

The design and materials optimization of a optical micropropeller comprised of silver nanorods on a fused silica substrate was developed. A combination of surface plasmon resonance, thermophoretic and convective forces enable rotation of the micropropeller in an aqueous environment. This work aims to eliminate the dependence of optical micropropellers on the requirement for a light source by relying on a blackbody radiation energy harvesting principle. This energy harvesting principle is able to plasmonically excite noble metal nanorods of a specific aspect ratio at specific wavelengths that correspond to an ambient temperature. By investigating the dependence of the aspect ratio and …

Optimization And Modeling Of An Energy Harvesting Optical Micropropeller For Microfluidic Applications, Jerry Shih

Nanoscale Science & Engineering (discontinued with class year 2014)

Geometry for a plasmonically active micro-propeller is designed in Matlab using a Metallic Nano-Particle Boundary Element Method (MNPBEM) toolbox in order to predict its optical response in long wavelengths of electromagnetic radiation. Electric field maps are plotted to determine the feasibility generating torque using the energy harvesting principle. Results indicate electric field lines that would promote rotation and the scattering cross section would cause nano-rods sitting on the propeller to radiate thermal energy. COMSOL modeling is performed to model the evolution natural convection currents as a result of the nano-rod heating which is then optimized to further promote rotation of …

Optimizing Dam Siting In The Paru River In Brazil Using A Multi-Objective Approach, Henrique De Paula

All Graduate Plan B and other Reports, Spring 1920 to Spring 2023

How should a decision-maker choose which hydropower plant to build in a given river? Hydropower plant expansion is a task that involves several stakeholders, objectives, and resources. It requires that decision-makers use not only experience and previous knowledge to come up with their final decision, but also the use of tools to help them to decide, as well as to support their choices. The present project developed a computation model to optimize the choice of hydropower plants that can be built within a given river, considering three different objectives - energy generation, flooded surface area and river connectivity. The input …

Optimizing Sustainable Integrated Use Of Groundwater, Surface Water And Reclaimed Water For The Competing Demands Of Agricultural Net Return And Urban Population, Silvia Anastasia Landa

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

The world population is growing rapidly. In developing countries, the growing population is mostly in urban areas. A bigger population requires more food, and more food requires more water. The water needed for food and people comes from the same sources: surface water (rivers, lakes, etc.) and groundwater (aquifers). Thus, there is a competing water demand between people and agriculture in urban areas.

In this research, we use computer software to make a model of the hydrologic system that focuses on surface water and groundwater. To make the model, we use data from real aquifers and streams in order to …

Improving Ventricular Catheter Design Through Computational Fluid Dynamics, Sofy Hefets Weisenberg

Masters Theses

Cerebrospinal fluid (CSF) shunts are fully implantable medical devices that are used to treat patients suffering from conditions characterized by elevated intracranial pressure, such as hydrocephalus. In cases of shunt failure or malfunction, patients are often required to endure one or more revision surgeries to replace all or part of the shunt. One of the primary causes of CSF shunt failure is obstruction of the ventricular catheter, a component of the shunt system implanted directly into the brain's ventricular system. This work aims to improve the design of ventricular catheters in order to reduce the incidence of catheter obstruction and …

Optimization Of Rfid System Coverage In A Manufacturing Environment, Scott D. Malatesta

Master's Theses

This paper compiles existing ideas, theories, and experiments across multiple disciplines to provide guidance for a company looking to implement an optimal RFID system in their production facility. The desire is to maximize the information received by the system while minimizing the cost. Four potential layouts of RFID antennas, two with overlapping antenna coverage and two with non-overlapping layouts, are first analyzed to understand the special coverage and the number of antennas required. The value of information is then quantified to determine whether higher coverage layouts are worth the additional costs associated with the higher number of antennas required. It …

Bbq Grill Temperature Uniformity Study, Monty Dodge Jr, Samuel Melo

Mechanical Engineering

Bull Outdoor Products, Incorporated, a barbeque grill and outdoor kitchen manufacturer, sponsored this project with the intent of improving the temperature uniformity across the surface of their barbecue grills. For this project, the Cal Poly team of mechanical engineering students, Monty Dodge Jr. and Samuel Melo, used the Brahma grill head model with setups for both natural gas and propane. In order to determine exactly what the uniformity across the grill surface was, the student team designed a testing apparatus which would measure a grid of temperature locations one inch apart spanning an area 16 by 36 inches. Developing a …

Design Of An Asymmetric Reluctance Machine For A Generator Application, Bryan David Marquet

Open Access Theses

This work compares an Asymmetric Reluctance Machine (ARM) to a Uniform air Gap Reluctance Machine (UGRM) for a generator application. The ARM employs an asymmetric rotor pole to increase machine performance, specifically increasing torque density. A multi-objective optimization is employed to minimize mass and loss subject to design constraints. Two machines are compared in terms of their Pareto-optimal fronts.

Optimization Of Wireless Power Networks For Biomedical Applications, Kyle A. Thackston

Open Access Theses

Successful physiological integration of electronics will open the doors to new methods of treatment and diagnoses. One of the key challenges of this integration is designing devices as small as possible while still maintaining high functionality, such as bio-signal recording, processing, telemetry, and stimulation. Wireless power transfer (WPT) can help shrink a device’s footprint by removing the need for bulky batteries. While many modalities of WPT exist for biomedical applications, the optimal power transfer efficiency (PTE) is seldom achieved due to improper impedance matching. Existing methods for determining the optimal impedance matching conditions tend to be application specific and make …

Role Of Low Carbon Energy Technologies In Near Term Energy Policy, Olaitan P. Olaleye

Doctoral Dissertations

In the first part of this thesis, we use a multi-model framework to examine a set of possible future energy scenarios resulting from R&D portfolios of Solar, Nuclear, Carbon Capture and Storage (CCS), Bio-Fuels, Bio-Electricity and Batteries for electric transportation. We show that CCS significantly complements Bio-Electricity, while most of the other energy technology pairs are substitutes. From the probabilistic analysis of future energy scenarios we observe that portfolios with CCS tend to stochastically dominate those without CCS; portfolios with only renewables tend to be stochastically dominated by others; and that there are clear decreasing marginal returns to scale. We …

Multi-Level Route-Optimization Computer Application, Ryan Sutardji, Frank Nguyen

Industrial and Manufacturing Engineering

This report provides a detailed analysis on how to optimize driving routes by creating a computer application. There are many different route-optimization issues that logistical companies consistently face, as well as many different solutions and algorithms. With technology on the rise, pick-up, delivery, and transportation services are become a huge part of our everyday lives. When optimizing routes, reducing transportation costs by minimizing travel distance is always ideal, but other factors must be considered such as arriving at a location before or after a certain time. Our objective is to optimize driving routes based on travel distance and priorities. We …

An Automated Method For Optimizing Compressor Blade Tuning, Kurt Berlin Hinkle

Theses and Dissertations

Because blades in jet engine compressors are subject to dynamic loads based on the engine's speed, it is essential that the blades are properly "tuned" to avoid resonance at those frequencies to ensure safe operation of the engine. The tuning process can be time consuming for designers because there are many parameters controlling the geometry of the blade and, therefore, its resonance frequencies. Humans cannot easily optimize design spaces consisting of multiple variables, but optimization algorithms can effectively optimize a design space with any number of design variables. Automated blade tuning can reduce design time while increasing the fidelity and …

Leveraging The Information Content Of Process-Based Models Using Differential Evolution And The Extended Kalman Filter, Lucas Howard

Graduate College Dissertations and Theses

Process-based models are used in a diverse array of fields, including environmental engineering to provide supporting information to engineers, policymakers and stakeholdes. Recent advances in remote sensing and data storage technology have provided opportunities for improving the application of process-based models and visualizing data, but also present new challenges. The availability of larger quantities of data may allow models to be constructed and calibrated in a more thorough and precise manner, but depending on the type and volume of data, it is not always clear how to incorporate the information content of these data into a coherent modeling framework. In …