Engineering Commons^™

Characterization Of Fracture Initiation In Non-Cylindrical Buckle Folds Using 3d Finite Element Analysis, Eli Jacob Steinbeck

Masters Theses

"The spatial distribution of fracture sets associated with buckle folds has been well documented in field studies. There are difficulties, however, in placing accurate constraints on the timing of the initiation of individual fracture sets during the deformation history of the fold under in-situ conditions. This study investigates specific conditions that give rise to the initiation of various fracture sets in the hinge and limb of a pericline, based on an analysis of the effective stress evolution during the processes of buckling and erosional unloading. A 3D finite element modeling approach is used to simulate the effective stress evolution in …

Fluid Flow Through Deformation Band, Huining Zhang

Masters Theses

"Cataclastic deformation bands, which are common in porous sandstone, have the potential to restrict fluid flow. Geological studies have shown that permeability of deformation band shear zones can be one to five orders of magnitude less than for the sandstone host rock. However, recent studies based on simplified analytical estimates have shown that fluid flow in jointed deformation bands may not be retarded since joints play an important role in conducting fluids. In this study, 2 dimensional finite element analysis (FEA) is used to simulate the total discharge flow rate through jointed deformations. Variations of single planar and conjugate jointed …

Integrated Geophysical Approach Using Electrical Resistivity Tomography And Multichannel Analysis Of Surface Wave In Assessing Wilson Spring Development, Ibrahim E. Ahmed

Doctoral Dissertations

"This research investigated fractured zones leading to preferential flow paths of Wilson Spring. In this context, electrical resistivity tomography (ERT) data and multi-channel analyses of surface waves (MASW) data were acquired at studied site with the purpose of mapping a variable depth to top of bedrock and geological structures.

Interpretation of the boreholes, MASW, and ERT data indicated that a depth to top of rock does vary significantly at the studied site due to many solution-widened fractures. Multiple near-vertical solution-widened fractures were mapped in the studied site based on the interpretation of the ERT data. The mapped solution-widened fractures appear …

Phytoforensics Tools: The Degradation And Detection Of Chlorinated Solvents In Integrated Systems, Tommy J. Goodwin Jr.

Masters Theses

"Due to decades of mismanaged pollutants entering groundwater, subsurface pollution of various compounds has become a widespread challenge. Chlorinated solvents are the most common groundwater contaminants that persist in aquifers, and remediation of these wide-spread plumes is difficult. Bioremediation, permeable reactive barriers, and phytoremediation are remedial technologies that have been developed and applied to chlorinated solvents in groundwater systems. This study integrates these technologies in different combinations to demonstrate the remediation potential of this approach. Zerovalent iron (ZVI) and bioaugmentation with a Dehalococcoides sp. (DHC) culture were applied separately and in combination for degradation of perchloroethene (PCE). Salix pentandra were …

3d Seismic Structural And Stratigraphic Interpretation Of The Tui-3d Field, Taranaki Basin, New Zealand, Gorkem Yagci

Masters Theses

"Identifying seismic structures and stratigraphy are important for exploration of hydrocarbons. The purpose of this study is to discover seismic structural and stratigraphic features and to utilize the results for interpreting depositional environments. A 3D seismic dataset from the Tui-3D Field, the Taranaki Basin, New Zealand with well data were used to visualize structures, to detect stratigraphic features, to identify main lithology, to understand depositional environment, and to describe seismic facies and reflection patterns of the target horizons. The major formations are in the Kapuni Group.

Seismic structural interpretation indicates thirty-two minor faults, which may play an important role in …

Numerical Analysis Of Flexural Slip During Viscoelastic Buckle Folding, Davi Rodrigues Damasceno

Masters Theses

"Flexural slip is considered to be an important folding mechanism contributing in the development of different folds such as chevron, and kink-band buckle folds. Various filed studies have provided a general conceptual and qualitative understanding of flexural slip. However, quantitative evidence of the importance of the flexural slip mechanism during fold evolution is sparse, as the actual amount of surface parallel displacement, and timing, is difficult to measure accurately, due to the lack of suitable strain markers.

In this study 2D finite element analysis is used to overcome these disadvantages and to simulate flexural slip during viscoelastic buckle folding. Variations …

Identifying Shallow Subsurface Stratigraphy And Voids Using Dispersive Characteristics Of Electromagnetic And Surface Waves, Payman Hajiani

Doctoral Dissertations

"This dissertation presents the results of three manuscripts on spectral analysis of electromagnetic and seismic surface waves to detect subsurface stratigraphy and voids. In the first manuscript, a new technique was developed by utilizing spectral analysis of surface waves to detect subsurface openings. This technique applied the concept of group delay to evaluate the effects of subsurface voids on the phase shift domain. Seismic data sets were acquired at different sites where the shape, size, and depth of the void varied. In all surveys, the time delay technique precisely identified the locations of the subsurface openings. The second manuscript presents …

Imaging Reinforced Concrete: A Comparative Study Of Ground Penetration Radar And Rebarscope, Abhishek Kodi

Masters Theses

"Geophysical techniques have been playing a very vital role in subsurface imaging in the recent past. Technology has been making it both reliable and convenient to utilize non-destructive geophysics techniques like Ground Penetration Radar, Induction current based Rebarscope, Seismic methods, ERT, etc. The applications range from shallow subsurface investigation of Bridge decks to old tunnels, mapping of rabars in a pre-existing construction and analyzing the concrete strength.

The thesis constitutes of a comparative study and analysis of a Ground Penetration Radar system and a Rebarscope. Individual parameters obtained directly from the study and obtained indirectly from the study shall be …

Assessment Of Highway Condition Using Combined Geophysical Surveys, Abdallah Alhadi Dera

Doctoral Dissertations

"Four pavement sections were investigated using ground penetrating radar (GPR) and Ultrasonic Surface Wave (USW). The objective of this research was to compare the effectiveness of two non-destructive geophysical tools, GPR and the PSPA, in assessing the condition of the pavements, composed of different construction materials. The GPR data were acquired using a 1.5 GHz antenna along five traverses spaced at two ft. intervals approximately 1000 ft. long. On the other hand, the PSPA data were acquired at the stations spaced at 1000 ft. along the five GPR traverses. Core samples were collected at each site to constrain the interpretation …

Geophysical Imaging Of Karst Features In Missouri, Jeremiah Chukwunonso Obi

Doctoral Dissertations

"Automated electrical resistivity tomography (ERT) supported with multichannel analysis of surface waves (MASW) and boring data were used to map karst related features in Missouri in order to understand karst processes better in Missouri. Previous works on karst in Missouri were mostly surficial mapping of bedrock outcrops and joints, which are not enough to define the internal structure of karst system, since most critical processes in karst occur underground. To understand these processes better, the density, placement and pattern of karst related features like solution-widened joints and voids, as well as top of bedrock were mapped. In the course of …

Variable Stress Orientations In The Offshore Nile Delta: The Role Of Salt As A Mechanical Detachment Horizon, Weicheng Zhang

Masters Theses

"The offshore Nile Delta is characterized by variations of the maximum horizontal stress orientation in subsalt and supra-salt sequences. Margin-parallel SH, typical for tertiary deltas, is observed for regions that are below or do not contain evaporites. In sequences underlain by evaporates pre-dominantly margin-normal SH is observed. This observation yielded the first conclusive in situ evidence that salt acts as a mechanical detachment layer. In this study, 3D finite element analysis (FEA) is used to simulate the total stress distribution in the offshore Nile Delta featuring evaporate sequences. Several parameters such as different salt sequence geometries, friction coefficient on faults, …