Engineering Commons^™

Effect Of Liquid-Solid Contact On Thermal Cracking Of Heavy Hydrocarbons In A Mechanically Fluidized Reactor, Mitesh C. Chaudhari

Electronic Thesis and Dissertation Repository

The aim of the thesis was to study the effect of liquid-solid contact on the thermal cracking of heavy hydrocarbons carried out in Fluid Cokers. The research has been carried out using a Mechanically Fluidized Reactor (MFR) in which the operating conditions of the Fluid Coking^TM reactions can be simulated and monitored. The first part of the research, aimed at investigating the effect of agitation on liquid-solid contact, which was carried out by changing the rotation speed of the agitator of the MFR for both non-reactive as well as for reactive systems. In both situations, it was observed that …

Analysis Of The Enzymatic Decomposition Of Barley Starch To Simple Carbohydrates, Mark Mathiew Williams

Master's Theses

The decomposition of barley starch plays a fundamental role in the final quality of fermented beverages in the brewing industry. The process of mashing involves steeping milled barley in water to stimulate the enzymatic decomposition of starch into simple carbohydrates. The temperature of the water significantly impacts the activity of the enzymes and in turn the resulting concentrations of sugar products. A kinetic model accurately predicting the types and quantities of sugars formed as a function of mash temperature would serve as a tool to tailor sugar profiles and optimize mashing procedures for a desired product.

Sixty minutes mashes were …

Photocalytic Degradation Of Malic Acid Under Thin Coated Tio2, Vanessa Silveira Rodgher

Electronic Thesis and Dissertation Repository

Opaque fluids have a limited irradiation transmission. Thus, their decontamination employing near UV irradiation poses significant technical challenges. In the present study, a thin UV-transparent/waterproof glue layer coated with a 1.5 wt% of TiO₂ and a new PhotoReactor Cell were implemented. TiO₂ irradiation in the PhotoReactor Cell was effected on the TiO₂ particle side, not directly in contact with the fluid, allowing the postulation of an “h⁺” site mobility mechanism on photocatalysis.

Photocatalytic degradation experiments with malic and malonic acid in water at 10, 20, 30 and 40 ppm showed the complete degradation of malic …

Fractional Condensation Of Bio-Oil Vapors, Akhil Tumbalam Gooty

Electronic Thesis and Dissertation Repository

The research project described in this thesis deals with an investigation on the fractional condensation of bio-oil vapors to improve the separation of some of the key components of the bio-oil and, consequently, improve the properties and the value of each of the separated product streams.

In the first part, the separation of a mixture of three model compounds of bio-oil from a vapor and carrier gas stream was investigated with the help of a series of three condensers maintained at different temperatures. The practical performance of the fractional condensation train was improved by comparing the experimental results with the …

Production Of Bio-Coal And Activated Carbon From Biomass, Diana C. Cruz

Electronic Thesis and Dissertation Repository

The slow pyrolysis of different biomasses (maple wood, birch bark, switch grass, coffee pulp and corn stalk) was studied with the aim to produce a solid pyrolysis product (bio-coal) with promising properties and potential for use in traditional fossil-coal applications. Batch pyrolysis experiments were conducted in a Mechanically Fluidized Reactor (MFR) at temperatures ranging from 143 to 665 ^oC, which includes the torrefaction temperature range (200-300 ^oC). The effects of temperature and holding time on bio-coal mass yields were determined. The bio-coals were characterized in detail and a highly-controlled study on bio-coal hygroscopicity is presented. Optimal conditions for …

Streamlined Extract Preparation For E. Coli-Based Cell-Free Protein Synthesis And Rapid Site-Specific Incorporation Of Unnatural Amino Acids In Proteins, Prashanta Shrestha

Theses and Dissertations

This thesis reports the viability of E. coli cell extracts prepared using equipment that is both common to biotechnology laboratories and able to process small volume samples and expression of proteins containing unnatural amino acids (UAAs) at higher level using PCR amplified linear DNA templates (LETs) in cell-free protein synthesis (CFPS) system. E. coli-based cell extracts are a vital component of inexpensive and high-yielding CFPS reactions. However, effective preparation of E. coli cell extract is limited to high-pressure homogenizers (French press style or impinge-style) or bead mill homogenizers, which all require a significant capital investment. This work specifically assessed the …

Liquid-Liquid Equilibrium Of Biodiesel Components, Joseph C. Bell

Theses and Dissertations

Biodiesel is produced from vegetable oils through transesterification. Triglyceride mixtures extracted from oilseed feedstocks are upgraded by reaction with an alcohol in the presence of a catalyst to produce fatty acid esters. This reaction produces a mixture of esters, glycerin, alcohol, and catalyst. Separation of the fatty acid esters (biodiesel) and glycerin can be accomplished through liquid-liquid extraction by water addition. Designing liquid-liquid extraction with water as the solvent requires ternary liquid-liquid equilibrium data for mixtures of water, glycerin, and fatty acid esters. Ternary mixture LLE data have been experimentally measured for several of these systems. Those measured include mixtures …

Model Development And Application Of Molecular Simulations For The Study Of Proton Transport In Bulk Water And For The Prediction Of Dipole Moments Of Organic Compounds, Abhishek Asthana

Theses and Dissertations

The present work demonstrates the application of molecular simulations (MD) in two different areas: proton transport in bulk water and estimation of the dipole moment of polar organic compounds. In both areas, relatively few successful and robust methodologies exist. In the first part, a new polarizable water model is developed for MD simulations of the proton transport process. The model was parametrized from a combination of quantum chemical calculations and experimental water properties. The model was implemented in MD simulation studies of liquid water at room temperature, as well as with excess protons. For pure water the model gave good …

Cleavage Of Acetyl Groups For Acetic Acid Production In Kraft Pulp Mills, Ravikant Amogisidha Patil

Electronic Theses and Dissertations

The objective of this thesis was to determine appropriate conditions for cleavage of acetyl groups from northeast hardwood. Currently, acetyl groups end up in a waste product stream in most wood based pulp mills and thus are underutilized. Recently, a techno‐economic analysis was published that evaluated the suitability of the ‘Near‐Neutral Extraction’ process for recovery of acetic acid and ethanol in Kraft pulp mills. The results showed that the proposed process suffered from high capital investment and a low rate of return on investment. Additionally, the revenues generated by the sale of acetic acid were two times greater than the …

Lignin Yield Maximization Of Lignocellulosic Biomass By Taguchi Robust Product Design Using Organosolv Fractionation, Anton Friedrich Astner

Masters Theses

Lignin, a byproduct of the organosolv pretreatment process using lignocellulosic biomass from switchgrass (Panicum virgatum) and tulip poplar (Liriodendron tulipifera) is currently being explored for its potential use in the production of value-added chemicals and biobased polymers. Pretreatment is one of the most expensive processing steps in cellulosic biomass conversion. Optimization of the process is one of the major goals of the biomass-toethanol conversion process. Taguchi Robust Product Design (TRPD) provides an effective engineering experimental design method for optimizing a system and designing products that are robust to process variations. Given the results of several preliminary …

Predicting Enzyme Targets For Optimization Of Metabolic Networks Under Uncertainty, David Christopher Flowers

Masters Theses

Recently, ensemble modeling was applied to metabolic networks for the sake of predicting the effects of genetic manipulations on the observed phenotype of the system. The ensemble of models is generated from experimental wild-type flux data and screened using phenotypic data from gene overexpression and knockout experiments, leaving predictive models. The need for data from multiple genetic perturbation experiments is an inherent limitation to this approach. In this investigation, ensemble modeling is used alongside elementary mode analysis to attempt to predict those enzymatic perturbations that are most likely to result in an increase in a target yield and a target …

Modeling, Fabrication And Characterization Of Scalable Electroless Gold Plated Nanostructures For Enhanced Surface Plasmon Resonance, Gyoung Gug Jang

Graduate Theses and Dissertations

The scientific and industrial demand for controllable thin gold (Au) film and Au nanostructures is increasing in many fields including opto-electronics, photovoltaics, MEMS devices, diagnostics, bio-molecular sensors, spectro-/microscopic surfaces and probes. In this study, a novel continuous flow electroless (CF-EL) Au plating method is developed to fabricate uniform Au thin films in ambient condition. The enhanced local mass transfer rate and continuous deposition resulting from CF-EL plating improved physical uniformity of deposited Au films and thermally transformed nanoparticles (NPs). Au films and NPs exhibited improved optical photoluminescence (PL) and surface plasmon resonance (SPR), respectively, relative to batch immersion EL (BI-EL) …

Application Of Carbon Dioxide Towards The Development Of Smart Materials, Green Reaction Schemes And Metallic Nanoparticle Synthesis, Fiaz Mohammed

All Dissertations

Global carbon dioxide (CO₂) emissions have steadily risen over the last 50 years, with 34 billion tons of CO₂ released in 2009 alone. Its potential as a greenhouse gas has negatively affected of our lives and environment by the resulting ocean acidification and climate change. To mitigate atmospheric CO₂, various strategies have been implemented for CO₂ separation, capture, storage and use as a chemical feedstock. The use of CO₂ in various chemical industries is attractive as its non-flammable, non-toxic, and relatively inert properties have made it an inherently safer alternative to traditional organic …

Refractive Index Chemical Sensing With Noble Metal Nanoparticles, Phillip Blake

Graduate Theses and Dissertations

Chemical sensing is a key component in modern society, especially in engineering applications. Because of their widespread impact, improvements to chemical sensors are a significant area of research. One class of sensors, plasmonic sensors, is being heavily researched because of their ability to detect low levels of analyte in near real time without destroying the analyte. This work studies a new class of plasmonic sensor that utilizes diffractive coupling to improve sensor performance. Specifically, this work outlines the first study of diffractive coupling sensors with typical nanoparticle shapes. Sensitivity of this new class of sensor is directly compared to typical …

Gravure Printability Of Indium Tin Oxide Nanoparticles On Glass And Pet Films For Applications In Printed Electronics, Dania Awni Alsaid

Dissertations

The advancements in the field of solution processable electro-active materials and their ability to be printed on different substrates have led to the evolution of printed electronics. In this field, electronic components are manufactured with conventional printing methods. Transparent electrodes made from indium tin oxide (ITO) are part of many electronic devices. Currently in industry, highly conductive ITO films are prepared by sputtering. The sputtering and then patterning of ITO films is a sophisticated process that consumes high energy, generates waste and produces films with limited flexibility. Therefore, there is a need to investigate processing methods for creating ITO films …

Capillary And Microchip Electrophoresis For The Monitoring Of Disease Causing Amyloid Proteins, Elizabeth Nancy Pryor

Graduate Theses and Dissertations

The detection of oligomers and aggregates formed by two amyloid proteins, insulin and amyloid-beta (AB), is of particular importance due to the role which these species play in Diabetes and Alzheimer's disease, respectively. However, existing techniques are limited in the ability to detect insulin and AB; oligomers due to the fact that these early aggregates are transient, present at low concentrations, and difficult to isolate. Improvements must be made to existing techniques or alternative techniques must be explored in order to identify and quantify the size of these oligomeric and aggregate species without disrupting their structure.

Capillary and microchip electrophoresis …

Using The Greet Model To Analyze Algae As A Feedstock For Biodiesel Production, Christopher Tatum

Masters Theses and Doctoral Dissertations

There is a growing interest in renewable, carbon-neutral biofuels such as ethanol and biodiesel. A life-cycle analysis is conducted in this study to determine the viability of using algae as a feedstock for biodiesel. The method involves assessing energy use, fossil fuel use, greenhouse gas emissions, and criteria pollutant emissions using a simulation developed by Argonne National Laboratory. The energy and emissions of algae-derived biodiesel are compared to those of soybean biodiesel, corn ethanol, conventional gasoline, and low-sulfur diesel. Results show that there are sizeable greenhouse gas emission benefits attributed to the production of both types of biodiesel as compared …

Pvt Study Of Selected Uae Reservoir Fluids, Rashid Sher Mohammad

Theses

Phase behavior modeling in crude oil includes prediction of thermodynamic properties (such as saturation pressure, density, viscosity, thermal conductivity, etc.) for the vapor and liquid phases. The aim of phase behavior modeling is to establish the accuracy and reliability of the developed equation of state model to predict various other fluid phase behavior properties at high pressure and temperature conditions.

In the first part of this work, a new and reliable phase behavior apparatus designed in Brazil was used for the two-stage recombination process and phase behavior measurements. The recombination of the surface sample fluids (first-stage separator gas and stock-tank …

Optimization Of Chiral Separation Of Nadolol By Simulated Moving Bed Technology, Nesma Nehad Hashem

Electronic Thesis and Dissertation Repository

Simulated Moving Bed (SMB) technology has gained increasing attention as one of the most powerful techniques for chromatographic separations due to its cost-effectiveness and efficiency. Application of SMB technology is especially important in the pharmaceutical industry for production of enantiopure drugs, as required under strict FDA regulations, to avoid possible adverse effects of racemic drugs. In this study, the performance of the SMB process in separation of racemic nadolol on a perphenyl carbamoylated beta cyclodextrin (β-CD) stationary phase was investigated. The equilibrium dispersive model coupled with bi-Langmuir adsorption isotherm and lumped kinetic approximation, constitute the mathematical model used to simulate …

Site-Specific Metallization Of Multiple Metals On A Single Dna Origami Template, Bibek Uprety

Theses and Dissertations

This work examines the selective deposition of two different metals on the same DNA origami template for nanofabrication. DNA, with adjustable size and shape serves as a suitable template for fabricating metal junctions in the nanometer domain via bottom-up assembly. Bottom-up assembly utilizes the recognition capability of molecules like DNA to self-assemble and form structures. In this regard, DNA origami provides a useful means for forming nanostructures by folding single-stranded DNA into different two and three dimensional shapes. Selective deposition of metal on specific locations of a DNA template is essential for making DNA-templated electronic circuits.Site-specific metallization of DNA origami …

Controlled Synthesis Of Single-Walled Carbon Nanotubes By Methane Decomposition And Their Application As Heterogeneous Partial Oxidation Catalyst, Inusa Abdullahi

Electronic Thesis and Dissertation Repository

Single-walled carbon nanotubes (SWCNTs) are materials with unique electronic and mechanical properties suitable for a large number of applications. Although, since their discovery many strategies for SWCNT synthesis have been explored, most of these are either tremendously energy intensive or require complex SWNCT purification strategies. These issues have resulted in expensive SWCNT production processes which in turn have hampered the development of a large range of SWCNT applications. This study deals with the controlled growth of SWCNTs from methane decomposition over iron and cobalt catalysts supported on MgO and the application of the CCVD grown SWCNTs as a catalyst for …

Ultrasound-Induced Phase Change Of Emulsion Droplets For Targeted Gene And Drug Delivery, James R. Lattin

Theses and Dissertations

This dissertation explores the potential of using perfluorocarbon emulsion droplets to add an ultrasound-sensitive element to drug delivery systems. These emulsion droplets may be induced to vaporize with ultrasound; during the rarefactional phase of an ultrasound wave, the pressure around the droplets may fall below the vapor pressure of the liquid forming the emulsion, providing a thermodynamic potential for vaporization. This ultrasound-induced phase change of the emulsion droplet could release therapeutics attached to the droplet surface or aid in drug delivery due to mechanical effects associated with vaporization and expansion, similar to the ability of cavitating bubbles to aid in …

Light And Heat Selective Polymer Nanocomposite Films For Sustainable Greenhouses, Jenna M. Allan

Electronic Thesis and Dissertation Repository

Ontario greenhouse operations offer the ability to provide safe, local produce year-round. However, energy consumption associated with this service, as well as limited light intensity during winter months, is a significant problem. For this reason quantum dot (QD) nanoparticles and silica aerogel (SA) granules were investigated as potential filler materials for the enhancement of the optical and thermal properties of poly (ethylene-vinyl acetate) (EVA), a common greenhouse plastic, for the concurrent goals of increasing biomass production and reducing energy consumption in greenhouses.

The QDs, synthesized by colloidal chemistry using a single-molecular precursor method, along with commercial SA particles were integrated …

Study On The Interactions Between Nanomaterials And Proteins, Yueqi Bi

Electronic Thesis and Dissertation Repository

Incorporating proteins with nanomaterials is an effective way to enhance the stability and function of proteins. The protein-nanomaterials hybrid systems have been extensively applied in drug delivery and biocatalysis. This thesis focuses on the different interactions between proteins and nanomaterials. Three sub-projects have been studied as follows;

1) Chemical interaction: Gold nanoparticles with a particle size of 15nm were applied to label bovine serum albumin (BSA), a globular protein, for realizing a colorimetric protein assay. The results of FTIR and Raman spectra indicate that gold nanoparticles bond to BSA via the amine bonds. The surface plasma resonance (SPR) of …

Preparation And Formulation Of Powder Coating For Application Of Enamelled Wire, Liuyin Xia

Electronic Thesis and Dissertation Repository

Enamelled wire is a conductive wire coated with a very thin layer of insulation, widely used in the field that requires tight coils of wire. The traditional enamelled wire is produced by liquid paint, which consists of resins, solvents, pigments, and additives. Organic solvent takes a relatively high content, normally of 75% to 90% by weight. Many efforts have been made to decrease the percentage of solvent in the insulation paint. On the other hand, increasing the solids content of given enamel results in the viscosity rises significantly, making it harder to flow. Therefore, powder coating technology as an alternative …

Syngas Impurity Effects On Cell Growth, Enzymatic Activities And Ethanol Production Via Fermentation, Deshun Xu

Theses and Dissertations

A syngas compositional database with focus on trace impurities was established. For this work, ammonia (NH3) and benzene (C6H6) effects on cell growth, enzymatic activities of hydrogenase and alcohol dehydrogenase (ADH), and product formation were studied. NH3, after entering media, will be converted rapidly to NH4+, which will raise the total osmolarity of the media. NH3, as a common nutrient for the cell growth, is not the real culprit for cell growth inhibition. In essence, it is the high osmolarity resulting from the accumulation of NH4+ in the media which disrupts the normal regulation of the cells. It was concluded …

Calcium Phosphate-Based Resorbable Biomaterials For Bone Regeneration, Daniel O. Costa

Electronic Thesis and Dissertation Repository

Bone defects are a prevalent problem in orthopedics and dentistry. Calcium phosphate-based coatings and nanocomposites offer unique solutions towards producing scaffolds with suitable physical, mechanical and biological properties for bone regeneration.

We developed a novel method to synthesize hydroxyapatite (HA) particles with high aspect ratio using sol-gel chemistry and hydrothermal treatment. We obtained tunable pure-phase carbonated-HA in the form of micro/nanorods and nanowires (diameters 25-800 nm). To mimic the structure of bone, HA nanowires were homogenously mixed within poly(ε-caprolactone) (PCL) to produce nanocomposites with improved mechanical properties as determined by uniaxial tensile testing.

Surface chemistry and topography of biomaterials play …

Thermodynamic Kinetics And Efficiency Analysis Of Methyl Viologen, Chang Chen

Theses and Dissertations

Methyl Viologen (MV) is an electron mediator that has great possibilities to be used with an electrode system in which the electrode system provides electrons towards reducing MV species. MV has three redox states and they can be converted to each other via redox reactions on the surface of the electrode. The concentration of the three species of MV was related to the voltage potential applied to the system through a thermodynamic model. With the thermodynamic model the concentration of the three species can be predicted with different applied voltage potentials towards providing guidance for controlling the redox state of …

Nano Tio2/Graphene Composites For Photovoltaic And Photocatalytic Materials, Nasrin Farhangi

Electronic Thesis and Dissertation Repository

Graphene has been recognized as one of the most exciting carbon based materials of the present decade due to its unique electronic, mechanical and thermal properties. High surface area exfoliated graphene sheets with controllable surface functionality is an attractive two-dimensional surface for attaching different metals and semiconductors for improving the performance of catalysts, sensors, photoelectronic and energy conversion devices. Graphene is an ideal material which can be used for improving various metal oxide properties such as those of titania (TiO₂). TiO₂/graphene composites have shown excellent properties compared to bare TiO₂ in various applications. In high …

Simultaneous Particle Agglomeration And Attrition In A High Temperature Fluidized Bed, Mithun Saha

Electronic Thesis and Dissertation Repository

Fluid Coking^TM is a major refining process to upgrade heavy crude oil or bitumen from oil sands. In Fluid Coking^TM bitumen is atomized with steam and sprayed inside a high temperature fluidized bed of coke particles where it thermally cracks into smaller molecules. Fluid Coking^TM is a carbon rejection process as solid carbon residues are formed during fragmentation into lighter hydrocarbon vapors. New coke deposits over existing coke particles and, consequently, the particle size increases. In addition, particles agglomeration occurs when the injected liquid does not disperse uniformly on individual hot coke particles but reaches, instead, local …