Engineering Commons^™

A Framework For Determining The Reliability Of Nanoscale Metallic Oxide Semiconductor (Mos) Devices, Wilkistar Otieno

USF Tampa Graduate Theses and Dissertations

An increase in worldwide investments during the past several decades has pro-pelled scienti c breakthroughs in nanoscience and technology research to new and exciting levels. To ensure that these discoveries lead to commercially viable prod-ucts, it is important to address some of the fundamental engineering and scientific challenges related to nanodevices. Due to the centrality of reliability to product integrity, nanoreliability requires critical analysis and understanding to ensure long-term sustainability of nanodevices and systems. In this study, we construct a relia-bility framework for nanoscale dielectric lms used in Metallic Oxide Semiconductor (MOS) devices. The successful fabrication and incorporation of metallic …

Expansion In Existing And Future Franchises, Shane Hart, Daniel Jeng

Industrial and Manufacturing Engineering

Zensho Group has recently acquired the restaurant US based chains CoCo’s and Carrows but has not been able to affirm the same growth as the company has established in its home country of Japan. In order to fulfill their need to grow, extensive market analysis and research needs to be done. An expansion eastward and the introduction of their flagship restaurant chain, Sukiya, would offer growth potential. Determining the best locations for these new stores is the goal of this project. Low cost and high market penetration potential will be used to recommend the ideal locations that will benefit the …

Sustainable Climate Control For Mid-Rise Office Building In The Salt Lake Valley, Philip M. Coleman

Industrial and Manufacturing Engineering

This report examines the sustainability of Trane’s EarthWiseTM climate control systems in the Salt Lake Valley (and the United States Mountain West in general). A simulation is performed to determine the best climate control system for a LEED Silver, 5-story tenant office building. This new building is a duplication of a pre-existing building. The climate control system installed at the preexisting building is used as a baseline against which three (3) alternative systems are compared. The social, ecological, and economic impact of each alternative is examined to determine which is the most sustainable. Since the baseline system is a proven …

Automation Of Pillow Speaker Button Testing To Avoid Repetitive Strain Injuries In Testing Technicians, Tyler P. Finnegan

Industrial and Manufacturing Engineering

Abstract Anacom MedTek, a medical device company, produces pillow speakers as their main product line. Pillow speakers are a healthcare communications tool that allow for hospital patients to control many entertainment and environmental components of the hospital room from one controller. These pillow speaker devices have anywhere from 3 to 27 metal dome key cap buttons based on their customization. Before they can be shipped to a customer, each button must be tested to ensure that it is functioning properly. This test is currently done manually by a testing technician. With so many buttons to be tested for each unit …

Pull Production System Training Guide, Adem Bilgutay

Industrial and Manufacturing Engineering

This book is a series of lessons designed to train operators and managers in pull manufacturing. It begins with a description of the different forms of waste that a system can help to identify and eliminate. The second section details the kanban as a system for controlling flow and as a powerful tool for identifying problems. It will describe the many different variations of kanban that exist to control flow in different production environments and the calculations that allow them to be used effectively. The final section will detail the activities that an operator should engage in when there is …

A Practical Approach To Computer Donation Supply Chain For Non-Profit Organizations, John Jacob Burrell, Adam Robert Carpenter

Industrial and Manufacturing Engineering

The United States today has a plethora of unused electronic equipment. This equipment comes from universities, small businesses, corporations, and many other sources. This project looks at the best way to put this equipment back to use for the remainder of its usable life by donating it to non-profit organizations in need. In order to complete this project it was necessary to research the areas of Supply Chain Management, Operations Research, and Engineering Economics. The approach for this specific project first involves analyzing the current donation process at California Polytechnic State University – San Luis Obispo, and its ability to …

An Investigation Of Metaheuristics Using Path- Relinking On The Quadratic Assignment Problem, Thashika Rupasinghe

All Dissertations

The Quadratic Assignment Problem (QAP) is a widely researched, yet complex, combinatorial optimization problem that is applicable in modeling many real-world problems. Specifically, many optimization problems are formulated as QAPs. To resolve QAPs, the recent trends have been to use metaheuristics rather than exact or heuristic methods, and many researchers have found that the use of hybrid metaheuristics is actually more effective. A newly proposed hybrid metaheuristic is path relinking (PR), which is used to generate solutions by combining two or more reference solutions. In this dissertation, we investigated these diversification and intensification mechanisms using QAP. To satisfy the extensive …

A Meta-Analysis Of Human Factors Analysis And Classification System Causal Factors: Establishing Benchmarking Standards And Human Error Latent Failure Pathway Associations In Various Domains, Katherine Berry

All Dissertations

Many models of accident investigation have been created and have served as the basis for other tools and techniques. One of the most prominent techniques, Reason's Swiss Cheese Model (1990), is based on the idea of active and latent failures. Expanding on this idea, the Human Factors Analysis and Classification System (HFACS) was created with the idea to associate contributing factors and errors (Wiegmann & Shappell, 2003).
While HFACS has been frequently applied in the field of aviation in literature, other industry types are under-represented. Seventeen data sources encompassing various industry types were collected and included in this dissertation analysis. …

Order Picking And Storage Using Stackable Pallets In A Warehouse, Ahmed Hassan Aly

All Dissertations

Quarter Billion dollars could be saved annually by double stacking pallets. A forklift storing 100 double stacked pallets saves 2.5 working hours versus single pallets. More than one billion pallets and cases handled between Wal-Mart distribution centers according to BEA White Paper (2006) [1], assume only 500 million were stackable pallets. This translates to 12.5 million working hours. If a forklift driver earns $20 per hour, then $250 million can be saved.
Moreover, handling double stacked pallets takes up to 46 % of total time to pick and store. This is a significant element that was ignored in literature. All …

Design Of A New Suturing And Knot Tying Device For Laparoscopic Surgery, Sinan Onal

USF Tampa Graduate Theses and Dissertations

Minimally invasive or laparoscopic surgery has completely changed the focus of surgery becoming an alternative to various types of open surgery. Minimally invasive surgery avoids invasive open surgery as the operation is performed through one or more small incisions in the abdomen and using a small camera called laparoscope. Through these incisions, surgeons insert specialized surgical instruments to perform the operation resulting in less postoperative pain, shorter hospital stay, and faster recovery. However, the main problems during minimally-invasive surgery are the limited space for operating instruments and the reduced visibility and range of motion inside the patient’s body. During minimally-invasive …

Simulation And Mathematical Modeling To Support Community-Wide Evacuation Decisions For Multiple Population Groups, Jun Duanmu

All Dissertations

Evacuating a large population from an at-risk area has been the subject of extensive research over the past few decades. In order to measure trip completion and total evacuation times accurately, most researchers have implemented some combination of simulation and optimization methods to provide vehicular flow and congestion data. While the general at-risk population comprises the majority of travelers on the road network, there are often specific groups to consider when assessing the ability to evacuate an entire population. In particular, healthcare facilities (e.g., hospitals) may require evacuation, and the trip times may become an important health issue for patients …

Determination Of Cap Model Parameters Using Numerical Optimization Method For Powder Compaction, Cong Lu

Dissertations (1934 -)

Many advantages are inherent to the successful powder metallurgy (P/M) process especially in high volume manufacturing. The strength/density distribution of the compacted product is crucial to overall success. The finite element analysis (FEA) method has become an effective way to numerically simulate strength/density distribution in a P/M compact. The modified Drucker-Prager cap (DPC) model has been shown to be a suitable constitutive relationship for metal powder compaction simulation. The calibration of the modified DPC model involves a procedure known as a triaxial compression test. Equipment for completing a triaxial compression test on metal powders is neither readily available nor standardized …

Prioritizing Patients For Emergency Evacuation From A Healthcare Facility, Ashley Childers

All Dissertations

The success of a healthcare facility evacuation depends on communication and decision-making at all levels of the organization, from the coordinators at incident command to the clinical staff who actually carry out the evacuation. One key decision is the order in which each patient is chosen for evacuation. While the typical planning assumption is that all patients are to be evacuated, there may not always be adequate time or resources available to move all patients. In these cases, prioritizing or ordering patients for evacuation becomes an extremely difficult decision to make. These decisions should be based on the current state …

Development Of A Task Assignment Tool To Customize Job Descriptions And Close Person-Job Fit Gaps, Bryan W. Booker

Dissertations

Does the knowledge worker fit the job or should the job fit the knowledge worker? This research developed a methodology and a tool to customize a knowledge worker’s job design to better fit their knowledge, skills, abilities and characteristics. The research outcomes support the customization of the job design to improve person-job fit, the documentation of the customized job design as a position description, and the use of a structured person-task assignment process. The recommended task assignment process includes a job aid that uses multivariate equations to predict expected task performance. Data were collected from two knowledge worker sub-groups: lean …

Remote Usability Testing - A New Approach Facilitated By Virtual Worlds, Kapil Chalil Madathil

All Theses

Synchronous remote usability testing, involves a facilitator conducting a usability test in real time, interacting with a participant who is remote. This study proposes a new methodology for conducting these studies using a three-dimensional virtual world, Wonderland, and compares it with two other commonly used synchronous usability test methods: the traditional lab approach and WebEx, a web-based conferencing and screen sharing approach.
The study involved 48 participants in total, 36 test subjects and 12 test facilitators. These 36 were equally divided among the three environments with the 12 test facilitators being paired with one participant in each of the environments. …

Optimizing And Benchmarking Returnable Container Processes Within An Automotive Distribution System, Camille Chism

Theses

An analysis of Reusable Packaging in automobile manufacturing facilities, as well as a comparison to other industries, shows that returnable container systems are not being fully utilized.

In this study, methods to return and track packaging materials for reuse are examined. Issues identified through surveys and interviews are summarized, and a recommendation to more fully utilize systems currently in place is proposed. An evaluation based on utilizing the current system will enable us to assign a cost to current operations, and may support an investment in improved systems and technologies.

Most of the companies surveyed gauge functionality based on whether …

Post-Project Risk Perception And Systems Management Reaction, Baqer Alali

Engineering Management & Systems Engineering Theses & Dissertations

The objective of this research is to identify whether risk management in projects has any role in risk management in systems. Projects, systems, and risk management are three integral concepts in the management of various enterprises and agencies. Risk management is a common concept in systems and project processes. To avoid failures or crisis during their life cycles, projects and systems managers practice risk management. Projects and systems have well defined life cycles during which the risk is defined, controlled, and managed. Risk management is conducted in each phase of projects and systems. Projects are initiated to close certain operational …

The Influence Of Network Factors On Network Centric Operations, Mehmet Fidanci

Engineering Management & Systems Engineering Theses & Dissertations

As Information Age changes the lifestyle of all humankinds, it also changes the way how to defense and secure the borders are secured and defended. The Information Age is about information superiority. It evolves the command and control concept, proactively, to optimize the size of the units and their connections within a combat force for effective mission accomplishment. The biggest issue is how big a unit will be and how they will arrange and connect it to the command and control structure in order for the unit to be effective on the battlefield. While some arrangements connect to each other …

Cable Time Estimation Database, Joshua L. Okerman

Industrial and Manufacturing Engineering

The use of time standards are the basis for a high efficiency system in the manufacturing environment. This project will investigate the process followed to design and develop a database used to calculate accurate cable assembly time standards used for scheduling at General Atomics. This project will then justify the use of the Cable Time Estimation Database, through an economic analysis compared to the current methods applied.

Statistical Quality Control In The Health Care Industry, Roberto Arce

Industrial and Manufacturing Engineering

In recognition to the increased length of stay of discharge patients, deteriorating patient care and staff satisfaction in a emergency department (ED), this project was set to improve these measures without reducing staff, adding new workers, and without increasing the number of beds. Lean methods such as value stream mapping (VSM) formed the basis of the project. This tool helped identify the patient process flow through the (ED) as well as the valued added and non-value added steps of the process. This project describes value stream map development in the emergency department at a community hospital. A current-state value stream …

Assessing Living Arrangements In Residential Halls, Romel Penaflor Auza

Industrial and Manufacturing Engineering

Hundreds of thousands of high school graduates head off to college each fall not knowing the environment they'll be living in for the next four years. The factors that predict success in the academic, social, and personal aspect of these freshmen students' lives revolves around one aspect that is often times overlooked. Freshmen students are subjected to the fast paced lifestyle of college and often times they need to feel “at home”. Their personal space becomes a matter that is important to them in relation to their success in the three aspects of academic success, social integration, and personal health. …

Increasing Production Capacity At A Start Up Biomedical Company, Traci J. Otsuji

Industrial and Manufacturing Engineering

The following senior project was first introduced during a summer internship at a biomedical company called Asthmatx Inc. Asthmatx is responsible for the development and manufacturing of a catheter‐based device for moderate to severe cases of asthma. Upon the approval of FDA, Asthmatx had planned to ramp up their production capacity significantly in order to accommodate the potential growth.

The first step in the process improvement was a facility reconfiguration that involved the adjustment of process sequencing and the implementation of ergonomic catheter channels. Next, time studies were conducted to gain more accurate time standards of the production process. After …

Police Operations Simulation, Robert Mcgee

Industrial and Manufacturing Engineering

In this report, the author explains the process of creating the Police Operations Simulation, shows step-by-step how it works, and statistically analyzes the results from SLOPD’s own proposed and current schedules. The data-gathering from the department and the simulation itself will receive the bulk of the coverage in this report, followed by sample results from SLOPD and a business plan for future sale to other departments.

Using the given numbers, it appears that the proposed schedule will result in significantly improved coverage for the city of San Luis Obispo. While any increase in the number officers on patrol tends to …

Ergonomic Methods To Improve Safety In The Construction Sector And Reduce Costs, Mona Barjasteh

Industrial and Manufacturing Engineering

Many small construction companies have difficulty providing a safe working environment for their employees because of their lack of resources. There is a need to provide a manual for small construction companies employing 10 or fewer workers with the best ergonomic solutions of the top most common injuries. Accidents in the construction field are very high with nearly 175,00o nonfatal injuries and 1,121 deaths in 2002. The nonfatal cases occur 7.1 times per 100 full time workers, while serious injuries occur 2.8 times per 100 full time workers. This information reveled the importance of focusing on minor injuries in order …

Process Improvement For The Department Of Surgery Sierra Vista Medical Center, Jessica Paz

Industrial and Manufacturing Engineering

This report proposes and analyzes process improvement methods for the Surgical Services Department at Sierra Vista Regional Medical Center. The department currently operates with an average of 25% of elective cases starting on time. This can be attributed to a number of inefficiencies that occur throughout the hospital.

The following Industrial Engineering methods were utilized to improve patient flow:  creation of a data collection system to quantify delays  use of simulation and facility redesign techniques to determine feasibility and benefits of moving towards a surgical center model  development of a user interfaced database to record and analyze …

Laser Clean Room Re-Design: A Manufacturing Facility Re-Layout, Jennifer J. Siu

Industrial and Manufacturing Engineering

Alcon’s Laser Clean Room fosters inefficient production practices, is outdated for its current process, and lacking in clear process/product flow. A facility re-design is applied to bring order, efficiency, and optimize flow in the laser production lines.

Deliverables include a new layout that decreases product travel distances and increases productivity as well as an implementation plan and cost/savings analysis. Major design decisions include downsizing the clean room, sorting to find waste and establishing clear process/product flows. The design was implemented within three weeks and results yield 29% reduction of product travel distance, 10.4 hrs/day saved from eliminated gowning time and …

Lean Inventory Management System For Boeing Missile Defense, Danielle Partridge

Industrial and Manufacturing Engineering

Lean inventory management is influential for business. One of the wastes businesses aim to reduce, using lean principles, is inventory. Inventory management provides the essential tools for eliminating extra inventory and cost that is tied up in capital.

Boeing’s Ground Based Missile Defense inventory area was failing at meeting their proprietary lean manufacturing goals. There was a need for an inventory system that included: lean principles, inventory management and user-friendly capability. The goal of this project’s inventory management database process was to minimize inventory investment while still meeting functional requirements. The deliverables for this project met the needs of Boeing’s …

Maintenance Service Request Process Optimization For The Cliffs Resort At Shell Beach, John Birch

Industrial and Manufacturing Engineering

This process optimization project utilizes a new idea to have an Access 2007 database automatically send a text message to a given cellular telephone. The hotel’s maintenance service request process is outdated and inefficient, relying solely on paper and human memory for success. Initiation, tracking, and recording the maintenance service requests need to be automated to optimize this process. The solution is a working database which employs said automation using Access 2007 in combination with a separate program created to facilitate the automatic text messaging. Implementing this database will result in higher customer satisfaction for the hotel.

Polyenvi, Stephen Beard, Josh Engel, Paul Fake, Diego Flores, Alvaro Nunez, Miguel Wong

Electrical Engineering

Poor indoor air quality is a problem that is recognized by the Environmental Protection Agency (EPA) to cause health issues. In order to raise awareness of this problem, this document outlines the construction of a device that economically measures air quality through five metrics: dust, smoke, ozone, humidity, and temperature. The device integrates with a router to provide users access to information about their indoor air quality anywhere over the internet as well as local access to the data via an LCD mounted on the router. By increasing indoor air quality awareness, this device will aid users in making adjustments …

Preference Driven University Course Scheduling System, Heather A. Bellardo

Master's Theses

University course planning and scheduling is the process of determining what courses to offer, how many sections are needed, determining the best term to offer each section, assigning a faculty member to instruct each section, and scheduling each section to a timeslot to avoid conflicts. The result of this task has an impact on every student and faculty member in the department. The process is typically broken down into three major phases: course offering planning, faculty assignment to planned course sections, and course scheduling into timeslots.

This thesis looks at each of these phases for the Industrial and Manufacturing department …