Engineering Commons^™

The Next Generation Cubesat: A Modular And Adaptable Cubesat Frame Design, James Dolengewicz, Lucas Whipple, Stephanie Wong

Mechanical Engineering

The goal of this project is to develop an improved next-generation CubeSat structure for Cal Poly’s PolySat program. Notable achievements include significantly increased ease of access, design to optimize payload space, improved machinability, increased modularity and a platform which allows for easy integration of future payloads.

Piedras Blancas Clock Works, Andrew James, Andrew Jupin, Matt Weber

Mechanical Engineering

In 1875, the Piedras Blancas Lighthouse was built to warn ships sailing the California coast of the hazards of the rocky shore. In 1949 a fierce storm damaged the top portion of the lighthouse and the eight ton cast iron and brass assembly had to be replaced by a much lighter piece that still served the purpose of warning oncoming vessels. The former top portion came to rest in downtown Cambria and is still there today, enclosed in a glass room to be observed by visitors and townspeople. Today, the Piedras Blancas Light station is cared for by the Bureau …

Adapted Recumbent Bike, Kurtis Mundell, Dane Tiemeier, Laura Yakuma, Darius Yu

Mechanical Engineering

The adapted recumbent project was to redesign a disabled veteran’s recumbent bicycle. The main areas of concern were the crank pedal, chain tension, braking and steering system, and ergonomics. Since the customer is an avid biker, this bike will be used often, so the design is based on the ease of repair and replacement. The crank system was redesigned to a lightweight, adjustable part with chain clearance and high strength. The chain tension was improved by replacing the existing single idler wheel/chain tube system with a dual idler wheel system. The dual idler has a titanium sprocket in one of …

Mobility Aid: A Dual Purpose Walker And Scooter, Zack Blois, Robia Choi, Kristin Dills

Mechanical Engineering

The Mobility Aid project was proposed by Theresa Mortilla and Idee Shapiro. The goal of the project was to design and build a device that can quickly and easily transform between a mobility walker and an electric scooter to allow for more freedom of mobility. The inspiration for this project arose from the fact that Theresa suffers from multiple sclerosis in her legs and can only walk for about thirty minutes at a time until she gets too fatigued and must sit down and rest. This device would provide her with the ability to continue moving while giving her legs …

Robot Crawling Device And Tee Table, Todd P. Trauman, Kyle M. Colvin, David Charles Fantz

Mechanical Engineering

As golf becomes a more frequently enjoyed activity, equipment manufacturers such as Hot Stix Golf require updated testing mechanisms to actively compete in their respective markets. One such testing device is a golfing robot nicknamed the “Iron Byron”. Two issues were asked to be addressed for the senior project. First, the robot was practically immobile unless taken apart and moved with a forklift. The request from Hot Stix was to mobilize the robot so that it could easily be transported with minimal use of external help. Secondly, the initial tee-table was both poorly-designed and missing altogether. The new tee-table needed …

Cal Poly Rose Float Electric Vehicle, Jennifer Slone, Jason Sherrett, Dionysios Pettas, Timothy Baldwin

Mechanical Engineering

(1) Background:

The Cal Poly Rose Float is currently powered by a pair of V-8 internal combustion engines. This is the second project in a three phase effort to replace the existing drive engine with an electric motor powered by a DC bus. The main goal of this phase of the project is to get the motor selected in phase one spinning.

(2) Results:

Originally, the project involved programming a microcontroller to achieve motor control. The decision was made, early on, to approach this task in a different manner due to the team’s minimal background in programming and mechatronics. The …

The Quadricycle Hand And Foot Cycle, Marissa Chin, Parker Drennan, Spencer Nelson, Kevin Reidy

Mechanical Engineering

This report documents the design process from concept generation to manufacturing for a hand and foot powered cycle named the Quadricycle. The Quadricycle project is a joint effort at California Polytechnic State University in San Luis Obispo between the Mechanical Engineering and Kinesiology Departments. The project objectives are to design a portable cycle that can be powered by hands and feet simultaneously in order to provide recreation and rehabilitation for a person with a disability. This project is funded under a grant by the National Science Foundation (NSF).

Asme Human Powered Vehicle, Benjamin Knaus, Philip Basmadjian, Nick Supat

Mechanical Engineering

Speed Solutions has been contracted to design and build a Human Powered Vehicle (HPV) frame and drivetrain for the Cal Poly HPV club to use in their 2011 race season. This project is being funded by the Cal Poly HPV club and their sponsors. The goal is to design, test and build a bicycle frame that the HPV club can attach to a fairing of their design. Primary design considerations will include speed, weight, cost, rider ergonomics, reliability and ease of repair. This vehicle will be used to compete in ASME’s Human Powered Vehicle Challenge (HPVC) series of races.

Universal Play Frame Vi, Justin Bazant, Cullen Crackel, Anthony Franceschi

Mechanical Engineering

This design report details the design process utilized by Adaptive Exercise Designs (AED) in creating the sixth design of the Universal Play Frame (UPF). The UPF is an adaptive frame which supports a variety of devices that allows athletes in wheelchairs with limited range of motion to participate in physical activity. The past five frame designs do not meet the needs of the Friday Club due to complications with function and time constraints. To ensure all of Fridays Club's needs were met, the problem was better defined by converting the customer requirements into engineering specifications. The design process our team …

Water Well Drilling Rig Final Project Report, Alexander (Alex) Wargnier, Thad Jablonski, Coel Schumacher

Mechanical Engineering

In this report, the improvements of a previously produced cable tool drilling rig are described. The purpose of the rig is to drill water wells for use in Africa in order to provide safe drinking water to many in need. An affordable, effective, and controllable rig is the design goal for this project. With the San Luis Obispo Rotary Club sponsoring the project the design team of WHole Engineering have made necessary design choices to manufacture the product. Actions performed include background research of existing drilling technologies, analysis of top concepts for the controlling mechanism, and selection for the final …

Foam Wars Ii, Sumant Advani, Sivadas Menon, Casey Pieplow

Mechanical Engineering

The team producing Foam Wars II consists of three Mechanical Engineering students and five Kinesiology students (three the first two quarters and two the last quarter) at California Polytechnic State University, San Luis Obispo. The project is the second iteration of Foam Wars as a senior project at Cal Poly, sponsored by Dr. Kevin Taylor under the National Science Foundation grant. Persons with disabilities often feel limited when it comes to recreational activities and Foam Wars would provide them with an outlet to interact and engage themselves in a group setting. The game consists of various wheelchair attachments that would …

A Study Of Golf Club Head Kinematics Near Impact, Stephen James Murphy, David Wadsworth Lavelle, Kevin Philip Melancon

Mechanical Engineering

No abstract provided.

Sae Baja: Final Drive Gearbox, Michael Mccausland, Michael Watkins, Ian Masterson, Andrew Sommer

Mechanical Engineering

This paper presents the results of a manual transmission project for SAE Baja. A full engineering process is documented, including problem definition, scheduling, conceptualization, decision theory, synthesis, analysis, manufacturing, and testing. A comparison is made between existing and potential mechanical power train solutions. The final design is analyzed in dynamic simulations, AGMA stress, predicted FFT spectrums, and shifting rod buckling. A number of complicated parts are manufactured through investment casting and direct CNC machining. Issues in the final assembly have prevented the project from being fully realized, recommendations are made for future SAE Baja teams.

Adapted Paddle Launch Vehicle, Duane Menton, Erik Granstrom, Matthew Resendez, Shannon Crilly

Mechanical Engineering

No abstract provided.

Tk Ripper, Charles Volk, Vincent Priolo, Zachary Mckibbin

Mechanical Engineering

The TK Ripper was designed to pull a rider on a wakeboard up from a deep water start. We believe the force and power required to pull a rider on a wakeboard out of the water provides enough force and power for many other extreme sports.

Water Conservation Device, Michael Eichermueller, Michael (Mike) Moren, Florian Liefhold, Philipp Von Vopelius, Christoph Wagner, Tommy Stendel, Jacob Venzor

Mechanical Engineering

The Water Conservation Project (WCP) is a design concept to reduce the water consumption on startup of a shower. Every time a shower is started with a conventional tank water heater, approximately 7.5 liters of cold water is flushed down the drain without being used before the hot water reaches the faucet. For a city the size of San Luis Obispo, this amounts to approximately 121 million liter of water per year. The main goal of this project was to devise a way to conserve the cold water that is contained in the hot water pipes before every shower. Ultimately, …

Guidable Motorcycle Headlight, Billie B. Fritz, Toby J. Lloyd

Mechanical Engineering

Motorcycling at night is an inherently dangerous situation and is compounded by poor illumination of the roadway when cornering through a turn. Due to stationary headlamps geometry being designed for upright riding position, cornering a motorcycle causes the illumination of the forward path to be decreased significantly. The goal of this project is to develop a lighting system that will improve road illumination for riders at night using guidable lights that deflect prior to and during a turn. In addition to developing a working prototype, this project’s intent is to work in conjunction with a partner from the school of …

Equine Hoof Block, Aaron Murano, Jason Smith

Mechanical Engineering

No abstract provided.

Final Design Report: Vibration Table For Cvbt- Vt4 Design Team, Thomas Bevan, Matthew Laurino

Mechanical Engineering

CVBT (Center for Vocational Building Technology) teaches villagers in Northeastern Thailand how to make various concrete products. Many of these products require the use of a vibration table in order to remove air and water trapped within the concrete. Removal of these voids improves the outside surface of the molded concrete, and also allows the use of a lower water to cement ratio, allowing a much stronger finished product. The currently used vibration table (VT3) has several disadvantages associated with it, which the new table (VT4) eliminates. Compared with the VT3, the VT4 has a more rigid tabletop and improved …

Pg&E Flow Loop Simulator, Cole Brooks, Seth Berger, Ben Thacker

Mechanical Engineering

PG&E’s Diablo Canyon Power Plant requested a full-sized Flow Loop Simulator to train technicians by giving them hands-on experience. The basic design requirements were established to determine the scope of the project and develop the specific characteristics of the system. The detailed system design is composed of a piping schematic, a three-dimensional layout of the system components and piping, and a skid structure for the support and transportation of the system. Heat transfer and fluid mechanics were used to analyze the system to size components.

Human Powered Helicopter, Brenton Haven, Daniel Hudson, Eli Knight

Mechanical Engineering

Fall of 2009, The Cal Poly Aircraft Construction club restarted Cal Poly's quest for the Sikorsky prize. The Sikorsky prize rewards the first a human powered helicopter to sustain controlled hover for one minute without stored energy. Throughout the 1980’s, Cal Poly made three attempts; the most successful being the DaVinci III. Also, the DaVinci III was the first ever publically recognized successful human powered helicopter to leave the ground. This scope of this project is to improve the DaVinci III fuselage and drivetrain for the DaVinci IV. The DaVinci IV adopts the DaVinci III system layout and improves both …

Solar Array Suspension Mechanism Final Design Report For Atk Space, Alex Gould, Randon Kruse, Jeremy Graul, Patrick Barney

Mechanical Engineering

The purpose of this project is to improve the existing Solar Array Suspension Mechanism used by ATK Space for the manufacturing and testing of deployable solar arrays. The current system requires too much time to operate and has too many removable parts that may fall and damage the solar arrays. Through the design and verification process the team successfully constructed a quick connecting suspension mechanism that requires no tools to use and has no removable parts. The final design includes the existing force gauge and large adjustment bars used by ATK Space with the addition of a compression spring adjustment …

Strider, Eric Johnson, Alex Trask, Ricardo Garcia

Mechanical Engineering

No abstract provided.

Improved Commuter Rail Workstation Table Through Crash Energy Management, Trevor Ness, Brandon Baker

Mechanical Engineering

Workstation tables in commuter rail trains have been identified as an area for improving passenger safety during train collisions. The goal of this senior project was to create such a table using a composite sandwich structure designed to safely absorb energy. Testing of previous table designs was used to establish engineering specifications for the static loading, work surface durability, and impact performance requirements of the new table. Analytical and finite element models were used to analyze new concepts until a design was achieved that could meet all specifications. The tabletop developed consists of a crushable aluminum honeycomb core with fiberglass …

Cal Poly Formulasae Engine Development, Matthew Ales, Rafael Mendoza, Mitchell (Mitch) Thomas, Leon Vinokurov

Mechanical Engineering

This project, engine development, was sponsored by Cal Poly FormulaSAE. The FormulaSAE team proposed this project in order to have a more reliable and more powerful engine for their car, to improve their overall performance at their competition. The baseline output of the engine is 37 hp and 24 lb-ft of torque. The goal of this project was to increase the output to 45 hp, to meet requirements determined by a trade study. We planned to increase the engine’s output using several strategies.

We evaluated all potential design decisions using a Ricardo WAVE model. Ricardo WAVE is a software tool …

Medtronic Universal Crimping Machine, Justin Ginochio, Andrew Hanson, Zachary (Zach) Dieterle

Mechanical Engineering

This project is geared towards the redesign and implementation of a crimping tool for use in the manufacturing of catheters produced by Medtronic Inc. Catheters require two steering cables to maneuver the end of the catheter through the body. The steering cables have a sleeve that is crimped onto their end in order to hold the cable in place inside the catheter steering handle. The current crimping tool, designed by Astro Tool Corp, has a few problems associated with its design. Additionally we are trying to get rid of a step in the manufacturing process that involves the adhesive, cyanoacrylate, …

Traversing Probe Assembly, Josh Bugni, Andrew Sofranko

Mechanical Engineering

No abstract provided.

Edwards Automation Final Project Report, Benjamin (Ben) Johnson, Joel Masters, Matthew (Matt) Stewart

Mechanical Engineering

The body of this work has been created for Edwards Lifesciences in conjunction with senior project requirements. As such, the information produced and contained within is under a non‐disclosure agreement. As per request by sponsor, the body of the work will not be submitted to any outside parties, and the title page will serve as proof of completion.

Cisco Data Center Energy Efficiency, Brandy Sizemore, Travis Snook, William Neumeister

Mechanical Engineering

The goal of the Cisco Systems data center efficiency study is to improve the energy efficiency of Lab C in Cisco’s Building 7. The main phases involved are research, energy analysis, CFD simulations, and lab testing. The first part of the project entailed research in the data center field. This included attending two lectures provided by Cisco, visiting the annual Silicon Valley Data Center Energy Efficiency Summit hosted by Network Appliance, going on many data center tours, and taking a 3-day 6Sigma CFD training class. Next, the 1st Law of Thermodynamics was applied to the CRAH (computer room air handler) …

Composite Suspension For Formula Sae Vehicle, Reid Olsen, Andrew Bookholt, Eric Melchiori

Mechanical Engineering

This senior project report describes how a redesign of the 2008 Cal Poly Formula SAE vehicle's suspension components was conducted using carbon fiber components.