Engineering Commons^™

Investigation Of Grouted Dowel Connection For Precast Concrete Wall Construction, Douglas J. Provost-Smith

Electronic Thesis and Dissertation Repository

The grouted dowel connection is a simple and cost-effective connection used in many precast concrete structural systems. The required dowel length is currently designed as a regular bar in reinforced concrete, which underestimates the bond strength, thus resulting in excessive connection lengths. Furthermore, precast wall construction continues throughout cold weather, where in-situ heating of the grout used in the grouted dowel connections is usually conducted for short periods of time. Hence, early-age exposure to subfreezing conditions may affect the quality of the grout and subsequently the bond strength of the connection, which can compromise structural integrity.

In this thesis, full-scale …

Development Of Design Loads For Transmission Line Structures Subjected To Downbursts Using Aero-Elastic Testing And Numerical Modeling, Amal Elawady

Electronic Thesis and Dissertation Repository

The failure of transmission line structures due to severe High Intensity Wind (HIW) events is one of the major problems facing the electrical utility companies in various places around the globe including Canada. An extensive research program focusing on this problem started about fifteen years ago at The University of Western Ontario (UWO). In this Thesis, two major milestones are achieved leading to the advancement of the knowledge in this field. The first milestone is conducting, for the first time, a test on an aero-elastic model of a multi-span transmission system under reduced–scale simulated downbursts. The first objective of the …

Behavior Of Fire-Exposed Rc Frames Before And After Jacketing, M. Monir M. Ajan Alhadid

Electronic Thesis and Dissertation Repository

Analysis and design of fire-exposed Reinforced Concrete (RC) frames before and after jacketing with concrete layers are commonly performed using prescriptive methods that rely on the concept of fire rating. These methods were developed based on empirical results on individual RC members subjected to certain fire conditions. In typical fire scenarios, the residual capacity, stiffness and thermal deformations affects not only the local performance of each fire-exposed member, but also the load redistribution and global behavior of the entire frame. In terms of fire safety, the philosophy of the new building codes considers objective-based design as an alternative of the …

Foundation Effects Of Trees Under Wind Loads, Padmavathi Venkata Sagi

Electronic Thesis and Dissertation Repository

Winching tests were conducted on a mature 24-year-old Norway spruce tree. The tree was instrumented with strain gauges along the root structure and tilt sensors along the tree stem and was winched to failure. Tracked tree-root system response to failure load and the material properties of the tree-root-soil system were used to examine the applicability of simple engineering principles to tree stability analysis. Tree stability was studied using the principles of Winkler foundation model for the first time. In order to study the very complex windthrow phenomenon, a novel experimental technique was used. Tree saplings with complete structural root systems …

Numerical Studies For Improving Fracture Toughness Resistance Curve Testing Using Single-Edge (Notched) Tension Specimens, Yifan Huang

Electronic Thesis and Dissertation Repository

The fracture toughness resistance curve, i.e. the J-integral resistance curve (J-R curve) or the crack tip opening displacement resistance (CTOD-R) curves, is widely used in the integrity assessment and strain-based design of energy pipelines with respect to planar defects (i.e. cracks). This thesis deals with issues related to the experimental determination of the J(CTOD)-R curves using the newly-developed single-edge (notched) tension (SE(T)) specimens. In the first study, the plastic geometry factor, i.e. the η_pl factor, used to evaluate J in a J-R curve test based on …

Innovating Two-Stage Concrete With Improved Rheological, Mechanical And Durability Properties, Manal F. Najjar

Electronic Thesis and Dissertation Repository

Two-stage concrete (TSC), also known as preplaced aggregate concrete, is a special type of concrete that is produced using a unique procedure which differs from that of conventional concrete. TSC is distinguished by its high coarse aggregate content and exceptional placement technique, whereby aggregates are first pre-placed in the mold then injected with a special grout. The preplacement of aggregates saves substantial energy since only the grout needs mechanical mixing; the grout is self-leveling and needs no vibration and no mechanical compaction. However, TSC applications are still limited despite substantial advancement of modern concrete technology. Therefore, there is a need …

Automated Control Flaw Generation Procedure: Cheakamus Dam Case Study, Bogdan Pavlovic

Electronic Thesis and Dissertation Repository

This thesis deals with the problem of aging hydropower infrastructure systems and system components, a problem that is very common across Canada. Flaws of common risk analysis methods are noted, and the need for new risk analysis approaches is identified. System dynamics simulation method is introduced as an implementation mechanism for the System Theoretic Process Analysis (STPA). STPA and its adaptation to complex hydropower systems are explained thoroughly. Fuzzy logic is used to model operator’s decision making. The main objectives of the research include the development of an automated generic approach that implements STPA and fuzzy logic for the investigation …

Application Of Treated Oil Sands Drill Cuttings Waste In Micropiles Construction, Moustafa Ahmed Raafat Mohamed Aboutabikh

Electronic Thesis and Dissertation Repository

A micropile is constructed by drilling a hole, placing a steel reinforcing element, grouting it using neat cement. However, cement production consumes energy and generates carbon dioxide. Implementing waste materials in construction applications represents a sustainable solution for many waste management problems. On the other hand, oil sands drill cuttings waste represents one of the most difficult challenges for the oil sands mining sector. Reducing the amount oil sands drill cutting waste sent to landfill offers one of the best solutions for waste management. This thesis presents an innovative solution for application of treated oil sands waste (TOSW) in grout …