Open Access. Powered by Scholars. Published by Universities.®

Engineering Commons™

Open Access. Powered by Scholars. Published by Universities.®

Theses/Dissertations

Air Force Institute of Technology

Aerospace Engineering

2001

Articles 1 - 25 of 25

Full-Text Articles in Engineering

Air Vehicle Path Planning, Jeffrey M. Hebert Dec 2001

Air Vehicle Path Planning, Jeffrey M. Hebert

Theses and Dissertations

This dissertation explores optimal path planning for air vehicles. An air vehicle exposed to illumination by a tracking radar is considered and the problem of determining an optimal planar trajectory connecting two prespecified points is addressed. An analytic solution yielding the trajectory minimizing the received radar energy reflected from the target is derived using the Calculus of Variations. Additionally, the related problem of an air vehicle tracked by a passive sensor is also solved. Using the insights gained from the single air vehicle radar exposure minimization problem, a hierarchical cooperative control law is formulated to determine the optimal trajectories that …

Go to article

Reduced Order Modeling For High Speed Flows With Moving Shocks, David J. Lucia Dec 2001

Reduced Order Modeling For High Speed Flows With Moving Shocks, David J. Lucia

Theses and Dissertations

The use of Proper Orthogonal Decomposition (POD) for reduced order modeling (ROM) of fluid problems is extended to high-speed compressible fluid flows. The challenge in using POD for high-speed flows is presented by the presence of moving discontinuities in the flow field. To overcome these difficulties, a domain decomposition approach is developed that isolates the region containing the moving shock wave for special treatment. The domain decomposition implementation produces internal boundaries between the various domain sections. The domains are linked using optimization-based solvers which employ constraints to ensure smoothness in overlapping portions of the internal boundary. This approach is applied …

Go to article

Modeling Axisymmetric Optical Precision Piezoelectric Membranes, James W. Rogers Jr. Oct 2001

Modeling Axisymmetric Optical Precision Piezoelectric Membranes, James W. Rogers Jr.

Theses and Dissertations

The US Department of Defense (DOD), as well as the National Aeronautics and Astronautics Administration (NASA) and the Jet Propulsion Laboratory (JPL) are interested in developing and deploying precise, compliant, light-weight, space-based structures. More specifically, the Air Force’s core competencies ‘Aerospace Superiority’ and ‘Information Superiority’ demand ever-increasing depth and breadth of capability. Whether used for energy transmission or optical reconnaissance, current launch restraints limit rigid space-based optical reflector size. To support this requirement, the Air Force Research Laboratory (AFRL) is developing a large space-based optical membrane telescope. Inflatable reflectors can conceptually break this barrier, but controlling such a compliant structure …

Go to article

Techniques For Reduced Order Modeling Of Aeroelastic Structures With Deforming Grids, John S. R. Anttonen Oct 2001

Techniques For Reduced Order Modeling Of Aeroelastic Structures With Deforming Grids, John S. R. Anttonen

Theses and Dissertations

Reduced order modeling (ROM) seeks to make the modeling of aeroelastic behavior practical by reducing computation time for design codes. Deforming grids are often used in aeroelastic problems to account for the deformation of the structure. Proper Orthogonal Decomposition (POD/ROM) is a ROM technique that operates in an index-space for computations, not accounting for changes in grid dynamics, and must be modified to reflect grid deformation properly. To investigate and account for the effects of grid deformation on POD/ROM, a new algorithm is developed that incorporates modifications to the usual formulation. Evaluation of the new algorithm is accomplished through application …

Go to article

Adaptive And Reconfigurable Flight Control, Yih Shiun Huang Mar 2001

Adaptive And Reconfigurable Flight Control, Yih Shiun Huang

Theses and Dissertations

An indirect adaptive and reconfigurable flight control system is developed. The three-module controller consists of: (1) a system identification module, (2) a parameter estimate smoother, and (3) a proportional and integral compensator for tracking control. Specifically: (1) The identification of a linear discrete-time control system's open-loop gain is addressed. The classical Kalman filter theory for linear control systems is extended and the control system's state and loop gain are jointly estimated on-line. Explicit formulae for the loop gain's estimate and estimation error covariance are derived. The estimate is unbiased and the predicted covariance is reliable. (2) An adaptive smoother is …

Go to article

Concept Exploration Of An Australian Indigenous Space Launch Capability, Anthony J. Rogers Mar 2001

Concept Exploration Of An Australian Indigenous Space Launch Capability, Anthony J. Rogers

Theses and Dissertations

This thesis explores the possibility of establishing an Australian indigenous space launch capability through developing and examining an Australian space launch program model. The model is based around launch site location, vehicle design, program duration, and the percentage Australian indigenous input into the program. The model was optimised in an effort maximise the benefits of such a capability, namely political prestige, security and in country technological base, while minimising the program's overall cost.

Go to article

Prediction Of Pilot Induced Oscillations (Pio) Due To Activator Rate Limiting Using The Open-Loop Onset Point (Olop) Criterion, Gregory P. Gilbreath Mar 2001

Prediction Of Pilot Induced Oscillations (Pio) Due To Activator Rate Limiting Using The Open-Loop Onset Point (Olop) Criterion, Gregory P. Gilbreath

Theses and Dissertations

Rate limiting has been a causal or contributing factor for Pilot Induced Oscillations (PIO). As part of the joint Air Force Institute of Technology/Test Pilot School (AFIT/TPS) program, an examination of the Open-Loop Onset Point (OLOP) criterion, developed by DLR German Aerospace, was conducted to see if it could predict PIO due to rate limiting and to evaluate its potential as a design tool. The criterion was applied to three previous flight test programs involving rate limiting. Findings from this analysis led to the HAVE OLOP flight test which was flown on the NF-16D Variable Stability In-flight Simulator Test Aircraft …

Go to article

Modification Of Position And Attitude Determination Of A Test Article Through Photogrammetry To Account For Structural Deformation, Sean A. Krolikowski Mar 2001

Modification Of Position And Attitude Determination Of A Test Article Through Photogrammetry To Account For Structural Deformation, Sean A. Krolikowski

Theses and Dissertations

This study improved the current method of position and attitude determination to account for structural deformation of the wind tunnel test article due to aerodynamic loading. To account for deformation, parabolic bending and linear twisting coefficients were added into the Levenberg-Marquardt multi-parameter solver. By accounting for deformation, the accuracy of position and attitude determination was greatly improved. This study also takes a qualitative look at the optimum number of wind tunnel cameras and model targets. Optimal configuration was found to be around 50 targets and 2 cameras offset by 90 degrees.

Go to article

Quality Initiatives In The Air Force Development Of Reusable Launch Vehicles, Charles S. Galbreath Mar 2001

Quality Initiatives In The Air Force Development Of Reusable Launch Vehicles, Charles S. Galbreath

Theses and Dissertations

This thesis identifies useful tools and techniques available to aid the Air Force development of a reusable launch vehicle (RLV). These tools are identified by comparing traits found within the Lean Aerospace Initiative, Six Sigma and systems engineering. While identified specifically for the RLV effort, these tools and techniques will be of use to many development programs. Historical perspectives of both RLV development efforts within the Air Force and origins of modern quality teachings are provided to establish a common foundation of knowledge, upon which, further analysis can be conducted. This thesis, also, summarizes the current RLV effort within the …

Go to article

Cooperative Behavior Schemes For Improving The Effectiveness Of Autonomous Wide Area Search Munitions, Daniel P. Gillen Mar 2001

Cooperative Behavior Schemes For Improving The Effectiveness Of Autonomous Wide Area Search Munitions, Daniel P. Gillen

Theses and Dissertations

The problem being addressed is how to best find and engage an unknown number of targets in unknown locations using multiple autonomous wide area search munitions. In this research cooperative behavior is being investigated to improve the overall mission effectiveness. A simulation was used to emulate the behavior of autonomous wide area search munitions and measure their overall expected performance. This code was modified to incorporate the capability for cooperative engagement based on a parameterized decision rule. Using Design of Experiments and Response Surface Methodologies, the simulation was run to achieve optimal decision rule parameters for given scenarios and to …

Go to article

Vibration Suppression Of A Rotationally Periodic Structure Using An Adaptive/Ppf Control Law, Mark J. Keller Mar 2001

Vibration Suppression Of A Rotationally Periodic Structure Using An Adaptive/Ppf Control Law, Mark J. Keller

Theses and Dissertations

For a compressor disk, effective vibration suppression requires broadband control, and the elimination of inter-blade coupling forces. Previous researchers achieved this using an active/passive piezoelectric shunt network. Unfortunately, optimal tuning of the shunt requires prior knowledge of the coupling strength, which is not well defined. This thesis uses an adaptive parameter estimator to eliminate the inter-blade coupling forces. In addition, the passive shunt is replaced with an analogous positive position feedback method. The resulting control law was used on a simulated four and eight bladed system. While substantial reductions in system response were achieved for the Adaptive/PPF control technique, the …

Go to article

Solar Radiation Pressure Modeling Issues For High Altitude Satellites, Dayne G. Cook Mar 2001

Solar Radiation Pressure Modeling Issues For High Altitude Satellites, Dayne G. Cook

Theses and Dissertations

Current satellite orbit propagation techniques employ a solar radiation pressure model that makes simplifying assumptions concerning the satellite and its orbital geometry. Solar radiation pressure, a non-gravitational perturbation, significantly affects satellite motion at high altitudes. The model currently in use by the Air Force for orbit determination includes the following assumptions: a constant cross-sectional area projected to the Sun, cylindrical Earth shadow for eclipse, and specular reflection. In reality, the satellite's cross-sectional area with respect to the Sun constantly changes, the Earth's shadow is conical, and reflection is both specular and diffuse. Additionally, the solar flux received at the Earth …

Go to article

Environmental Disturbance Modeling For Large Inflatable Space Structures, Donald J. Davis Mar 2001

Environmental Disturbance Modeling For Large Inflatable Space Structures, Donald J. Davis

Theses and Dissertations

Tightening space budgets and stagnating spacelift capabilities are driving the Air Force and other space agencies to focus on inflatable technology as a reliable, inexpensive means of deploying large structures in orbit. Recent improvements in rigidization techniques make the use these inflatable structures feasible for a growing number of missions. For many of these missions, the primary design requirement is dimensional accuracy of the structure. Finite element analysis offers a means of predicting structural behavior in orbit. The analysis requires knowledge of external loads. This thesis examines the environmental disturbances which act upon large, orbiting structures. Calculations are made on …

Go to article

Rigex: Preliminary Design Of A Rigidized Inflatable Get-Away-Special Experiment, John D. Disebastian Iii Mar 2001

Rigex: Preliminary Design Of A Rigidized Inflatable Get-Away-Special Experiment, John D. Disebastian Iii

Theses and Dissertations

As space structures grow in size and complexity, their weight and cost increase considerably. The use of inflatable and rigidizable structures offers drastic improvements in all areas of spacecraft design. The goal of this experiment is to verify and validate ground testing of inflation and rigidization methods for inflatable space structures. The Rigidized Inflatable Get-Away-Special Experiment is an autonomous, self-contained space shuttle experiment that will inflate and rigidize several structures. After inflation, the experiment will perform a structural analysis by exciting the rigidized structures and collecting vibration data. A systems engineering approach is utilized to make design decisions based on …

Go to article

Air Vehicle Optimal Trajectories For Radar Exposure Minimization, Michael C. Novy Mar 2001

Air Vehicle Optimal Trajectories For Radar Exposure Minimization, Michael C. Novy

Theses and Dissertations

This study addresses the problem of analyzing the single vehicle path planning problem for radar exposure minimization. The calculus of Variations and optimal control are applied to formulate the cost function and numerical algorithms are used to solve for the optimal paths. Cost sensitivity to path length is analyzed for flight against one radar; a second radar is then included in the formulation and the optimal path for flight between the radars is found for cases of equal and unequal radar power. The costs of the optimal path, direct path, and Voronoi diagram-generated paths are compared. Results indicate low sensitivity …

Go to article

The Use Of Systems Engineering Processes And Tools To Develop A System Dynamic Simulation Model Of Engineering Support During The Development Phase Of An Acquisition Program, Jason E. Bartolomei Mar 2001

The Use Of Systems Engineering Processes And Tools To Develop A System Dynamic Simulation Model Of Engineering Support During The Development Phase Of An Acquisition Program, Jason E. Bartolomei

Theses and Dissertations

Due to the increase of system complexity and the existing draw down of manpower allocations, today's acquisitions environment desperately needs a systems approach to decision making. Many studies have been performed to model the entire government acquisition environment. Due to the high degree of aggregation, front line decision-makers have had no use for the information these models provide. This research focuses on the Air Force's largest functional support element in aircraft systems development, engineering. I will only consider one phase of the government acquisition cycle the Engineering, Manufacturing, and Development (EMD). This is the development cycle, which begins with initial …

Go to article

Estimation Of Relative Satellite Formation Elements In Near Circular Orbits, Ralph E. Bordner Iii Mar 2001

Estimation Of Relative Satellite Formation Elements In Near Circular Orbits, Ralph E. Bordner Iii

Theses and Dissertations

Precise relative position determination of satellite formation elements in near circular orbits is the focus of this thesis. A Bayes filter is used for the estimator with the dynamics solution obtained by solving the time periodic, linearized system via Floquet theory. This approach is similar to that of the traditional Clohessy-Wiltshire treatment, however much more of the system's behavior is retained by using a linear, time periodic system. The dynamics model includes all zonal harmonics of the Earth as well as sectoral, tesseral, and air drag perturbations. The filter algorithm was fed three types of simulated measurements: relative Carrier-Phases Differential …

Go to article

Turbine Blade Surface Roughness Effects On Shear Drag And Heat Transfer, Jess W. Drab Mar 2001

Turbine Blade Surface Roughness Effects On Shear Drag And Heat Transfer, Jess W. Drab

Theses and Dissertations

This work used scaled samples of actual turbine blade surfaces to characterize correlations between turbine surface roughness, friction coefficient, and convective heat transfer rate-parameters which affect an engine's efficiency and the blade's lifespan. For erosion/deposits, friction coefficients up to 250 times higher and convective heat transfer coefficients of up to 150 times higher were found when compared to a flat plate baseline. Other roughness types (pitting and fuel deposits) yielded less dramatic results. These results did not follow existing friction coefficient-to-heat transfer coefficient correlations, such as the Reynolds analogy. While these analytical and empirical correlations hold for flat plates, they …

Go to article

Analysis Of The Application Of A Triggered Isomer Heat Exchanger As A Replacement For The Combustion Chamber In An Off-The-Shelf Turbojet, Carl R. Hartsfield Mar 2001

Analysis Of The Application Of A Triggered Isomer Heat Exchanger As A Replacement For The Combustion Chamber In An Off-The-Shelf Turbojet, Carl R. Hartsfield

Theses and Dissertations

The objective of this research was to evaluate the feasibility of using the triggered decay of a radioactive isomer in a solid-state heat exchanger to power a gas turbine engine. Primary performance measures were stagnation temperature increase and stagnation pressure drop across the heat exchanger. Analysis was performed using commercial software, and explored three types of heat exchanger: concentric tubes, radial fins with constant spacing, and radial fins with constant thickness. All met or exceeded performance of the baseline J-57 turbojet engine at static sea level conditions. A single configuration of heat exchanger, using concentric tubes, was evaluated at typical …

Go to article

Development And Testing Of A Multiple Filter Approach For Precise Dgps Positioning And Carrier-Phase Ambiguity Resolution, Paul E. Henderson Mar 2001

Development And Testing Of A Multiple Filter Approach For Precise Dgps Positioning And Carrier-Phase Ambiguity Resolution, Paul E. Henderson

Theses and Dissertations

The most precise relative positioning obtained using differential GPS depends on accurately determining carrier-phase integer ambiguities. To achieve high precision, many current static and kinematic algorithms use a floating-point solution until enough information becomes available to fix the carrier-phase ambiguities accurately. A mew method is presented that uses a multiple model Kalman filter to resolve the carrier-phase integer ambiguities. This method starts with the floating-point results, yet smoothly and rapidly attains the precision of the correct fixed-integer solution, eliminating the need to decide when to switch from the floating to the fixed-integer solution. This method is based on a theoretically …

Go to article

A Study Of Linear Vs. Nonlinear Control Techniques For The Reconfiguration Of Satellite Formations, David J. Irvin Jr. Mar 2001

A Study Of Linear Vs. Nonlinear Control Techniques For The Reconfiguration Of Satellite Formations, David J. Irvin Jr.

Theses and Dissertations

This thesis investigates several linear and nonlinear feedback control methods for satellite formation reconfigurations and compares them to a near optimal open loop, discrete-time, impulsive maneuver. The reconfigurations are done in terms of a set of relative parameters that define an orbit about the leader satellite (or center reference position if a leader satellite does not exist at the center of the formation). The purpose of the study is two-fold, to compare the control usage of continuous feedback control methods versus a discrete bum method and to determine if nonlinear control techniques offer significant improvement over more conventional linear control …

Go to article

Desktop Computer Programs For Preliminary Design Of Transonic Compressor Rotors, Brian C. Mcdonald Mar 2001

Desktop Computer Programs For Preliminary Design Of Transonic Compressor Rotors, Brian C. Mcdonald

Theses and Dissertations

A need exist for correlation-based desktop computer programs that predict the flow through transonic compressor rotors with nominal computational time and cost. Modified versions of two desktop computer programs, BOWSHOCK and TRANSROTOR, were used to perform a parametric study on a modem compressor rotor. BOWSHOCK calculates the exit flow properties of a supersonic streamtube through a user-defined compressor rotor. TRANSROTOR calculates flow properties at three stations in a user-defined compressor stage. Modifications to TRANSROTOR included the incorporation of a recently published rotor loss model. Baseline and modified TRANSROTOR versions were run with two modern transonic compressor blades. Results were compared …

Go to article

Phugoid Damping Control, Nicolas J. Schindeler Mar 2001

Phugoid Damping Control, Nicolas J. Schindeler

Theses and Dissertations

A novel phugoid damping control design methodology is developed, based on the use of wind axes and a point-mass aircraft model. The state variables are air speed, flight path angle, and heading angle, the control variables are thrust setting, angle of attack, bank angle, and sideslip angle, and the command signals are airspeed, flight path angle, and heading angle or heading rate. All the variables and parameters are nondimensionalized. A multivariable set point controller is developed which consists of: (1) a trim calculation-based nonlinear feed-forward control computer; thus, given a commanded new trim state (air speed, flight path angle, and …

Go to article

The Development Of A Finite Element Program To Model High Cycle Fatigue In Isotropic Plates, William C. Shipman Mar 2001

The Development Of A Finite Element Program To Model High Cycle Fatigue In Isotropic Plates, William C. Shipman

Theses and Dissertations

As part of a joint AFRL/DAGSI turbine blade research effort, a computer program has been developed that uses a von Karman large-deflection two-dimensional finite element approximation to determine stress levels and patterns in isotropic thin plates. The dynamic loading of various plates has been carried out in order to model a high cycle fatigue situation. The research considered the various effects of mode shapes, resident frequency, non-linear cyclic effect, endurance limits, and stress variations within a high cycle fatigue environment. Two main initiatives were taken. First, a transient analysis tool was developed that calculates stress and displacement patterns over a …

Go to article

Computational Investigation Of Aeromechanical Hcf Effects In A Compressor Rotor, Andrew L. White Mar 2001

Computational Investigation Of Aeromechanical Hcf Effects In A Compressor Rotor, Andrew L. White

Theses and Dissertations

High-Cycle Fatigue is a major problem facing the gas turbine industry today. It has been investigated by many researchers, using many different methods. Due to its highly complex nature, designers still do not have adequate tools to accurately predict the onset of high-cycle fatigue. A three-dimensional Navier-Stokes program was used to perform a study of the unsteady aerodynamics on a compressor rotor. The effect of aerodynamic detuning on the forced response of a rotor blade was compared to a baseline tuned rotor case. Detuning consisted of a ten percent decrease in circumferential spacing between alternate pairs of blades. The high-cycle …

Go to article