Engineering Commons^™

Integration Of Lean Manufacturing And Value Engineering Techniques To Improve The Internal Distribution System In A Manufacturing Company, Sripadjaraj Prahladaraj

Masters Theses and Doctoral Dissertations

The XYZ Corporation is located in Lafayette, Georgia. The company produces cooking ranges for the North American market. It has 1500 employees with a daily production capacity of 1000 to 1500 cooking ranges. The company is implementing lean manufacturing techniques to improve their performance. One of their projects is to develop a distribution system, which will help in streamlining the internal distribution of Very High Pressure (VHP) adhesive tapes. The aim of this research is to develop a lean distribution system by applying techniques of lean manufacturing systems. To understand the existing process of distribution, a flow diagram was created. …

Implementation Of Critical Path Method And Critical Resource Diagramming Using Arena Simulation Software, Jamie Ehresman Gunter

Masters Theses

A relatively new resource management tool, which considers both time and resource requirements, is Critical Resource Diagramming (CRD). CRD is a simple extension to the CPM technique developed for resource management purposes. It is a graphical tool used mainly for resource scheduling.

The purpose of this study is to use the Arena simulation software and CRD to solve problems. This will be accomplished by setting up an example problem in the simulation program, Arena, and the CRD approach will be used as a deterministic and probabilistic problem.

The Arena output results for the deterministic parts of the example were compared …

Developing A Lean Based Model For A Hospital Pharmacy Environment, Jason North

Masters Theses

Lean strategies have become necessary in healthcare due primarily to two factors: a demand for efficiency and a need to reduce medical error. The case for the necessity of a lean program is based on trends of increasing costs and decreasing revenues resulting from government intervention. Profit margin per patient has been reduced, and therefore more patients per time period must be seen in order to meet profitability goals. Preventable medical error is shown to be a leading cause of death.

Current research in the area of hospital and healthcare efficiency proves that a parallel exists between healthcare efficiency today …

Causal Analysis Of Fatal Trenching Accidents, John Patrick Wagner

Masters Theses

A study was performed by the Construction Industry Research and Policy Center at The University of Tennessee, Knoxville to identify causation for U.S. trench collapse fatalities in the construction industry that occurred during the years 1997-1999. Of the 1217 fatality case files analyzed, 44 were categorized as trench collapse fatalities. The 44 trench collapse case files were analyzed and the contributed factors of the fatalities were identified in an effort to determine the causation of collapses. The results of the study showed a large number of trenches without any type of protective devices being used. The findings of the fatal …

Using Simulation Techniques To Evaluate Group Technology Heuristics: A Recommended Methodology For Comparison And Optimization, Ashley Nolen Akerman

Masters Theses

Machine cell formation is an important issue in industrial and manufacturing engineering. Properly assigned machine cells can improve manufacturing system efficiencies and decrease unnecessary material movement. To address the need for proper cell formation techniques a myriad of heuristics have been created that attempt to optimize the grouping of machines. Further, much industrial engineering research has been conducted on the application of simulation technology to manufacturing system evaluation.

The purpose of this thesis is to investigate the combination of traditional machine grouping heuristics with simulation technology and to create a generalized meta-model based upon this evaluation. This investigation analyzes the …

A Computer Modeling Approach Using Critical Resource Diagramming Network Analysis In Project Scheduling, Vincent Gilles Delgado

Masters Theses

The problem of resource constrained project scheduling (RCPSP) continues to be an important topic in project management. Different scheduling processes have been introduced to solve cases of RCPSP. Most of the developed methods are based on a network analysis approach. The two main technique of project network analysis used for planning, scheduling, and control are PERT and CPM. These approaches assume unlimited resource availability in project network analysis. In realistic projects, both the time and resource requirements of activities should be considered in developing network schedules. Another particularity of the methods created, so far, is the focus on activities during …

Decision Factors For Cooperative Multiple Warhead Uav Target Classification And Attack With Control Applications, Douglas D. Decker

Theses and Dissertations

Autonomous wide area search, classification and attack using Unmanned Combat Air Vehicles (UCAVs) is considered. The wide area search and attack scenario is modeled, capturing important problem parameters related to environment, seeker, and munitions. Probabilistic analysis is used to formulate and analytically solve for various probabilities, including the probability of mission success. Two methods are utilized. The first examines the sub-events required for various events to occur. The second utilizes a Markov chain approach. General expressions are first obtained that are applicable to any assumed a priori distributions of targets and false targets. These expressions are subsequently applied to a …

Application Of Queuing Theory And Procedure Time Estimation In A Local Healthcare System, Galina Tsoy

Engineering Management & Systems Engineering Theses & Dissertations

People in the United States pay more for their basic healthcare needs than do people in any other nation in the world. When we consider that the United States is the wealthiest nation in the world, controlling the majority of the world's resources, it seems only reasonable to ask: Why should it be this way?

In an effort to address this problem, this thesis examines two possible methods of improving health care efficiency in hospitals. The thesis is thus in two parts: the first part examines resource allocation in medical units using Queuing Theory, and the second part examines a …

Investigating Graphical User Interface Usability On Task Sequence And Display Structure Dependencies, Tirthankar Sengupta

Dissertations

Designing Graphical User Interfaces (GUI) requires the consideration of task sequence requirements (sequence of operations arising from task structures and application constraints) and display structure (layout of the elements of the interface) relationships. The basic purpose was to understand the usability differences of the interfaces through efficiency, motor performance, and search performance.

Thirty-two subjects performed experiments in four groups. The experiments differed in display structure and compatibility of task sequences. Subject mouse actions, mouse coordinates and eye positions were recorded. The derived measures, click efficiency, mouse traversal and eye visits to different areas of interest (namely the tool, object, and …

Development Of Internet Based Lean Assessment Methodology And Tool: Utopex, Prashant M. Hulloli

Masters Theses

Lean implementation is a complex process and requires a comprehensive lean assessment methodology that collects information from all the areas of an organization, and helps to determine the current state of the organization. A lean assessment tool is a stepping-stone for successful lean implementation as it provides as accurate accounting of a company’s current state and helps develop future strategies for business activities. It is quite essential to develop a lean assessment tool that focuses on manufacturing systems, support systems, operational excellence (integration of lean & six-sigma), and cultural sustainability of the organization. The assessment tool is developed focusing on …

Stability Analysis Of Jump-Linear Systems Driven By Finite-State Machines With Markovian Inputs, Sudarshan S. Patilkulkarni

Electrical & Computer Engineering Theses & Dissertations

A control system with a fault recovery mechanism in the feedback loop and with faults occurring in a non-deterministic manner can be modeled as a class of hybrid systems, i.e., a dynamical system switched by a finite-state machine or an automaton. When the plant and controller are linear, such a system can be modeled as a jump-linear system driven by a finite-state machine with a random input process. Such fault recovery mechanisms are found in flight control systems and distributed control systems with communication networks. In these critical applications, closed-loop stability of the system in the presence of fault recoveries …

Adoption Of Iso 14001 By Construction Companies In Egypt, Dalia Abdel-Hamid Mahmoud Sakr

Archived Theses and Dissertations

No abstract provided.

Supply Chain Risk Analysis, Venkata R. Kallepalli

Theses

A new decision support system is proposed and developed that will help sustaining business in a high-risk business environment. The system is developed as a web application to better integrate the supply chain entities and to provide a common platform for performing risk analysis in a supply chain. The system performs a risk analysis and calculates risk factor with each activity in the supply considering its interrelationship with other activities. Bayesian networks along with fault tree structures are embedded in the system and logical rules are used to perform a qualitative fault tree analysis, as the data required to calculate …

Simulation Analysis Of Anti-Rollover Mechanism For Vehicles, Mohib L. Raid

Theses

Rollover accidents are considered the most significant safety problems for all classes of light vehicles, especially pickups, Sport Utility Vehicles (SUV), Light Truck Vehicle (LTV) and vans. The main objective of the research is the design of a new mechanism able to keep the vehicle stable under various road conditions and high speeds, to prevent the vehicle from rolling over and to maintain the stability for the vehicle by creating an anti-rolling torque on the vehicle body capable of turning the vehicle smoothly to stable position.

Human Factors Approach Towards Improving Readability Of Bus Schedules, Anand Tharanathan

Theses

Due to an increasing concern over the readability of existing bus schedules of a public transportation agency the schedule format was redesigned. Two prototype schedules were designed based on the gathered information from the literature survey, focus group meetings and data from other public transportation agencies' schedules. One of the prototypes was designed by giving primary importance to the direction of travel and was named the directional prototype schedule. The other prototype was designed by giving primary importance to the day of the week, and was named weekday / weekend prototype schedule. A time based laboratory experiment and a subjective …

Case Studies In Disassembly Process Planning, Riteshkumar Dhimmar

Theses

The rapid advancement in technology started in last century and still continuing resulted in decreased life cycle of electronic products. It also resulted in increased product disposal rate and filling land fill space faster causing shortage of such space and consequently creates major environmental problems. So, since couple of decade environmental concern has focused on production process and environmental regulations imposed by government has watched industrial pollution. With government regulations to control environmental problems; consumers are also aware of adverse effects of product disposal forcing manufacturer to become more responsible for safe product disposal and recycling of used product.

A …

Supply Chain Risk Mitigation, Roshan R. Pai

Theses

In recent years, especially post 9/11, there has been an increasing awareness for securing business supply chains against probable disruptions. With globalization and lean inventories, the efficiency of supply chain has greatly enhanced over the years, but at the expense of new vulnerabilities. Supply chain vulnerabilities have resulted in disruptions to the economic stability and security. As a result, risk analysis and mitigation has now grown to become one of the key links to business stabilization. To ensure business continuity, it is necessary to identify key assets (physical and operational) within the supply chain and secure them against probable threats. …

An Enhanced Dynamic Slope Scaling Procedure With Tahu Scheme For Fixed Charge Network Flow Problems, Xinyan Pan

Masters Theses

In this thesis, a heuristic algorithm for solving large scale fixed charge network problems (FCNFP) based on the dynamic slope scaling procedure (DSSP) and tabu search strategies is presented. The proposed heuristic (the enhanced DSSP) integrates the DSSP with the classical short-term memory intensification and long-term memory diversification mechanism in the tabu search to improve the performance of the pure DSSP. With the feature of dynamically evolving memory, the enhanced DSSP evaluates the solutions in the search history and it iteratively adjusts the linear factors of the LP approximations of the FCNFP to produce promising search neighborhoods for good quality …

Modeling And Validation Of A Brake Hose, Jai Thomas

Masters Theses

Various computer aided design (CAD) softwares have the capability to depict rigid bodies in space accurately. However, the same is not true for the flexible components. This is because flexible components in an automobile are subject to large elastic deformations during the movement of the rigid components to which they are attached.

This research details the application of the principles of computation of the orientation of entities in a simplified coordinate system, vector mathematics, the file I/O features and structured C++ programming to view the rubber hose in CAD after modeling the hose using simulation software. Further validation of the …

The Relationship Of Project Team Attributes To Project Interim Performance, Vickie S. Parsons

Engineering Management & Systems Engineering Theses & Dissertations

The factors associated with project success, or failure, have not been conclusively resolved in the project management literature. The purpose of this research was to investigate the relationship of project team attributes and interim project performance using a statistical research design. An abundance of research has focused solely on the importance of technical project components as they relate to cost, schedule, or technical performance. However, research into internal team attributes has been sporadic and, generally, associated with subjective measures of project performance or less than optimal statistical techniques. Prior assessment of project performance has also been concentrated at project completion. …

A Value Focused Thinking Model For The Development And Selection Of Electrical Energy Source Alternatives At Military Installations, Gregory T. Schanding

Theses and Dissertations

Electrical power on military installations is vital for mission accomplishment. Most installations obtain electrical power from a local commercial utility. Although commercial power service has a very low interruption rate, the threat of a sustained power outage resulting from a terrorist act or a natural disaster is of concern. The military should posture itself to prevent such power outages and prepare to mitigate the adverse effects associated with the loss of power. This thesis presents a Value Focused Thinking approach to the development of a decision analysis model to assist a decision maker at a military installation in the generation …

Investigating The Optimal Management Strategy For A Healthcare Facility Maintenance Program, Daria J. Gaillard

Theses and Dissertations

Reacting to the need to transform and the increasing pressure to outsource all non-core activities, Air Force Material Command Surgeon General discontinued its previous use of full service contracts with original equipment manufacturers and adopted a relatively new maintenance outsourcing strategy: strategic partnering with an equipment management firm. The objective of this study is to create a decision-model for selecting the optimal management strategy for a healthcare organization's facility maintenance program. This study used personal interviews with facility management personnel from MAJCOMs to collect and analyze data. This study offers a re-conceptualized framework for viewing and understanding the various maintenance …

Keys To Successful Implementation And Sustainment Of Managed Maintenance For Healthcare Facilities, Elizabeth A. Waggoner

Theses and Dissertations

Health care providers are faced with two critical issues in today's evolving marketplace: lowering operational costs and achieving more efficient, cost-effective methods to deliver high quality patient care. The rising costs of healthcare and decreasing budgets have placed additional strain on the United States Air Force Medical Service to aggressively lower its facilities' costs. With fewer funds and less personnel, the Air Force medical service is re-evaluating its current maintenance outsourcing implementation practices and reexamining how these strategies might be implemented and sustained more successfully. This research offers some of the foundational needs for designing, implementing and sustaining any type …

Decision Analysis With Value Focused Thinking As A Methodology To Assess Air Force Officer Retention Alternatives, Sang-Ho Moon

Theses and Dissertations

Many countries realize the importance of the retention of qualified military personnel, and have tried to solve this problem using various methods. Nevertheless, the effects of those methods have not been determined or proven yet. The military retention problem is closely related to each individual's separation decision from the military. The characteristics of this decision are multi-objective and highly subjective. Accordingly, the effectiveness of various methods is heavily dependant on the value set of each individual. Decision Analysis (DA) using Value Focused Thinking (VFT) can be an excellent process to deal with this decision. Also, the data can reflect the …

Agent Based Simulation Seas Evaluation Of Dodaf Architecture, Gregory V. Destefano

Theses and Dissertations

With Department of Defense (DoD) weapon systems being deeply rooted in the command, control, communications, computers, intelligence, surveillance, and reconnaissance (C4ISR) structure, it is necessary for combat models to capture C4ISR effects in order to properly assess military worth. Unlike many DoD legacy combat models, the agent based model System Effectiveness and Analysis Simulation (SEAS) is identified as having C4ISR analysis capabilities. In lieu of requirements for all new DoD C4ISR weapon systems to be placed within a DoD Architectural Framework (DoDAF), investigation of means to export data from the Framework to the combat model SEAS began. Through operational, system, …

Using Value-Focused Thinking To Evaluate The Effectiveness Of Air Force Utility Privatization, Carlos Braziel

Theses and Dissertations

The majority of the Air Force s stateside utility systems are old, obsolete, and unreliable. The cost to upgrade and repair these systems is currently estimated at over $4 billion. In response, the Air Force began efforts to convey ownership of these utility systems to the private sector through privatization efforts. However, privatization critics believe that newly privatized entities of government will cost the public more money and provide a lower level of service. Therefore, independent audits are a necessity to ensure government initiatives, meet their intended goals. However, the Air Force currently lacks an effective auditing tool to ensure …

An Analysis Of Coast Guard Hh-65 Engine Reliability: A Comparison Of Malfunctions To Component Removals, Donna L. Cottrell

Theses and Dissertations

The Coast Guard HH-65 helicopter experienced 31 in-flight loss of power incidents during FY 2003 and 21 during the first two months of FY 2003. Concurrent with this apparent decrease in reliability, the Coast Guard seeks ways to expand the HH- 65’s Airborne Use of Force capabilities as a result of the September 11th, 2001 terrorists’ attacks. This study is an exploratory, empirical analysis of engine and airframe component replacements as related to engine mishaps and reliability in the HH-65. We use contingency table analysis, ordinary least squares regression, and logistic regression to examine the mishap history and component replacement …

Modeling And Analysis Of Post-Conflict Reconstruction, Damon B. Richardson

Theses and Dissertations

The forces at play in reconstruction operations are a complex system of time phased interlocking cause and effect relationships that are not thoroughly understood. A model capable of capturing the general dynamics involved in post-conflict reconstruction would provide insight to decision makers regarding potential policy alternatives. This research effort demonstrates the viability of using systems dynamics modeling techniques to simulate the establishment of public order and safety in a post-conflict reconstruction operation (Phase IV operations). A high level generic framework is developed that can be used as a general template for modeling post-conflict reconstruction. It is then demonstrated with a …

Phase-Type Approximations For Wear Processes In A Semi-Markov Environment, Christopher J. Solo

Theses and Dissertations

The reliability of a single-unit system experiencing degradation (wear) due to the influence of a general, observable environment process is considered. In particular, the failure time distribution is evaluated using only observations of the unit's current operating environment which is characterized as a finite semi-Markov process (SMP). In order to impose the Markov property, generally distributed environment state sojourn times are approximated as phase-type (PH) random variables using observations of state holding times and transition rates. The use of PH distributions facilitates the use of existing analytical results for reliability evaluation of units subject to an environment process that evolves …

Developing Team Cohesion: A Quasi-Field Experiment, John F. Costello

Theses and Dissertations

Within military organizations, research findings have lent support to the positive influence cohesion has on group performance in combat and non-combat areas, Beyond performance, research findings show that cohesion influences the job satisfaction, and health of military members, particularly under highly stressful conditions, such as those encountered in combat or extended deployments. The purpose of this research effort is to further analyze the strategies that should be used to develop cohesiveness among Air Force members. This was done by testing the extent to which cohesion changed when familiarization and challenging situations were coupled in a technical training course geared towards …