Engineering Commons^™

Enhancing Dental Aligners With Direct 3d Printing Manufacturing, Erin Clark, Lauren Ickes, Tyler Madison

Williams Honors College, Honors Research Projects

Replacement of thermoforming with direct 3d printed aligners, molding appliances for dental and alveolar movement. Currently the process involved requires 3d printing models and plastic thermoforming, trimming and polishing to fabricate the end product. If possible a product that could be 3d printed that had stress retention, crack resistance, and stain resistance properties delivered in thickness between .030 and .040 inches.

The Passing Board, John Fitzgerald

Williams Honors College, Honors Research Projects

For my Honors Research Project I am taking a more personal route and looking to solve a childhood question/issue by designing a board that is small and easy to transport while also giving the best bounce pass possible. My proposed project would be a board that a soccer player can play a bounce pass onto and receive the ball from. The base of this design sounds simple enough, however, I would like to implement a way that the board can be adjusted to alter the angle of return of the soccer ball after the bounce. I also want to design …

Amphisbaenian Head Movement And Burrowing Forces In Damp Granular Media, Jacob Newell

Williams Honors College, Honors Research Projects

Damp granular media is a difficult environment to study because it is both practically complex and it lacks equations which fully describe its behavior. In this study, an oscillatory lateral head movement and its effects while penetrating damp granular media were tested using a robophysical model. This experimental research was inspired by the burrowing behavior of the clade Amphisbaenia, a group of usually limbless squamates that employ a variety of different burrowing behaviors, but it can apply to a wide range of burrowers. This research could help with both human burrowing technologies and the further investigation of animal behaviors.

Cost-Benefit Analysis Of Increased Water Treatment Plant Service Goals On Reducing Water Quality Risk, Briton Polen, Kendra Sanner

Williams Honors College, Honors Research Projects

To treat water to make it safe to drink, disinfection processes are used in water treatment plants. These disinfection processes produce disinfection byproducts (DBPs) through the reaction of organic matter and the disinfectant, such as chlorine. DBPs have been shown to pose a cancer risk to consumers. In this report, the focus is on two types of DBPs, trihalomethanes (THMs) and haloacetic acids (HAAs). The cancer risks associated with DBPs are analyzed through ingestion and inhalation pathways. Ingestion and inhalation consist of common water uses like drinking, cooking, or bathing. In addition to this, DBPs have been shown to increase …

Mouthpiece For Patients With Neuromuscular Disorders, Rebekah Starkey, Carissa Thompson, Michael Dickens, Andrew Pero

Williams Honors College, Honors Research Projects

Neuromuscular Disorders (NMDs) impact people throughout the world. An early hallmark of these disorders includes some degree of facial muscle weakness. Respiratory testing is important to evaluate the progression of these patients’ NMDs. However, these tests require that the patient purses their lips around a mouthpiece to create a tight seal. This is a difficult task for one with facial muscle degeneration. This often leads to results that fail to reflect the patient’s true respiratory ability and prevents their physician from providing the appropriate degree of care. The objective of this project was to develop a face mask or mouthpiece …

Ecg Monitoring In Athletes, Jalal Jwayyed, Kelly Purgason, Joseph Linder, Annamarie Alfery, Silvia Furman

Williams Honors College, Honors Research Projects

Athletes and medical personnel need reliable methods to monitor vital signs and detect potentially life-threatening issues before they occur. Electrocardiograph (ECG) monitors are currently the best method of detecting heart-related health issues. Current ECG monitors worn by athletes are difficult to use and lack the ability to track ECGs in real time. Through research and interviews with various clinicians, further problems have been identified that include poor electrode adhesion, and a lack of compatibility with the equipment worn by athletes. Our team proposes to develop solutions that will improve performance and comfort associated with ECG monitors for athletic applications. This …

Minimally Invasive Repair Of Elongated Chordae Tendineae In The Mitral Valve, Walid Abuhashim, Diana Albaba, Austin Ghiates, Rebecca Leiter, Mary Robakowski

Williams Honors College, Honors Research Projects

In the United States, about 4 million people have been estimated to suffer from severe mitral valve regurgitation [5]. Due to the high risks involved, about half of those patients are ineligible for surgery to repair the valve, because of their poor health [6]. Elongation of the chordae tendineae has been found to be one of the significant causes of regurgitation. To address this, the team has developed a device called “Chord Fastener”, which will restore proper function to the valve via shortening of the chordae tendineae [1]. Via this shortening mechanism, the device will reduce mitral valve regurgitation and …

Enhancement Of The Syncardia Total Artificial Heart For Pediatric Use, Margaret Clark, Madison Marks

Williams Honors College, Honors Research Projects

Pediatric patients with disorders and diseases of the heart have limited options with regards to implantable devices. Many of these implants are ventricular assist devices, which is not always suitable for a patient. Total artificial hearts (TAHs) have supported many adult patients until transplantation, and we believe that they could do the same for pediatric patients. SynCardia has the only Food and Drug Administration (FDA) approved TAH devices. Since SynCardia is the only company with FDA approved TAHs, we decided to modify the design of the SynCardia TAH for use in pediatric patients without compromising the function of the current …

Custom 3d Printed Orthotic, Dakota Kirtley, Andrew Wiles

Williams Honors College, Honors Research Projects

The goal of this senior design projet is to develop a cutsom 3D printed orthotic shoe insert. Pressure mapping, laser scanning, and 3D modeling will be used to create a truly custom orthotic for each foot. Pressure mapping will give the weight distribution on an individual's food and the laser scanner will give the x-y coordinates of the foot. these two together will be used to generate a a 3D model which will then be 3D printed to create a custom orthotic. Research and material testing will also be done to determine the best material type to be used in …

Artificial Reverse Shoulder Arthroplasty Joint Project, Michael Rosen, Bailei Hoyng

Williams Honors College, Honors Research Projects

This proposed project will be developing an artificial reverse shoulder arthroplasty joint that focuses on improvements to the Zimmer Biomet Comprehensive Reverse System by freating a unique feature, or features, to the humeral component that focuses on the prevention of dislocation by not limiting the range of motion of men from ages 45 to 65 years.

The development of the this project will utilize the Food and Drug Administration (FDA) medical device design process. This project will involve a total of four Biomedical Engineering students from the University of Akron. Two students, Michael and Bailei, are in the Honors college …

Development And Exploration Of A Z-Shaped Foot And Ankle Internal Fixation Plate, Rhaz Shaghaghi Paul, Ian Hames, Sean Rich

Williams Honors College, Honors Research Projects

This paper will detail the design process of developing a Z-shaped foot and ankle internal fixation plating system. Group 6: Plates for the Sole was made up of 5 team members, who worked together to accommodate their client’s request to complete a biomechanical analysis of a Z-Plate design and a construct a prototype. The Z-Plate’s purpose is to provide podiatrists with a new solution that can fit nicely on the small, irregular bones of the foot, while also remaining strong enough to withstand the forces and torques of the foot.

Quickcough: An Instrumentational Proximal Airway Clearance Technique (Act) For Select Patients With Neuromuscular Disease (Nmd), Sean X. Sullivan, Russell K. Catania, Madison K. Plaster, Sydney E. Kandray, Mariah Costa

Williams Honors College, Honors Research Projects

Patients with neuromuscular disease (NMD) requiring tracheostomy and mechanical ventilation secondary to respiratory failure encounter increased difficulty in removing pulmonary secretions from the airways. To combat issues associated with current treatment modalities for insufficient cough efficacy (cost, poor mobility, discomfort, lack of evidence), we have developed an instrumentational proximal airway clearance technique (ACT) which augments a manual proximal ACT developed by a client with NMD. QuickCough is a 3D-printed PLA attachment to the tracheostomy apparatus which has demonstrated its ability to facilitate pressure changes necessary to increase patient’s peak cough flow (PCF) by providing a stronger exsufflation for the patient. …

Multidimensional Mass Spectrometry Of Chemonic™ Ccg-6 Nonionic Surfactant With Separation By Polarity And Shape, Charles Johnson

Williams Honors College, Honors Research Projects

Chemonic™ CCG-6 surfactant is a water-soluble poly(ethylene glycol) (PEG) conjugated alkyl glyceride emollient. This surfactant exists as a complex mixture of a glycerol cores conjugated with poly(ethylene glycol) branches (PEGylation) that were partially esterified with caprylic (C8) and capric (C10) acids. These may be esterified on one, two, or all three arms of the glyceride. The architecture of the structures in this mixture was studied using multidimensional mass spectrometry (MS). Mass spectrometry was interfaced with ultra-performance liquid chromatography (UPLC) and ion mobility (IM) separation. The mixture was separated by reversed-phase LC, oligomers of the star-branched polymer were separated according to …

Fabrication And Characterization Of Nanofiber Nylon-6-Mwcnt As An Electrochemical Sensor For Sodium Ions Concentration Detection In Sweat, Kelsey Mills

Williams Honors College, Honors Research Projects

Fabrication and characterization nylon-6-MWCNT nanofiber as an electrochemical sensor to detect sodium ion concentrations specifically in sweat. Using contact angle to determine surface morphology and chronoamperometry testing to identify ideal sensor conditions, tests optimized parameters like weight percent of nylon or other polymers, carbon nanotube (CNT) isomer, and solution concentration to determine reproducibility of functional sensors. Utilizing the electric qualities of carbon nanotubes partnered with the sodium ion selectivity of calixarene treatment and polymers unique properties like flexibility and scalability create open an arena for optimizing sodium ion sensors for further development for functional prototypes. Morphology tests showed that the …

Forget-Me-Not, Daniel Barber-Cironi, Shawn Nicholson, Jake Kruse, Nicole Dent

Williams Honors College, Honors Research Projects

The purpose of Forget-Me-Not is to provide another level of care and comfort to those suffering from mild dementia, as well as provide further assistance for a friend, family member, or caretaker who may look after them. Research shows that timely reminders and persistent information can greatly improve the quality of life for those afflicted with mild dementia (Mokhtari et al.). Forget-Me-Not’s persistent display and wearable smart-bracelet offer a customizable and well connected system to provide these reminders. For the caretaker, a mobile application is provided in order to maintain the display and notify them of emergencies or critical events …

Hydroband: The Continuous Hydration Monitoring System, Karina E. Atkinson, Catherine P. Benedict

Williams Honors College, Honors Research Projects

Dehydration is defined as a mild, moderate, or extreme loss of water in the body. It can result in fever, muscle cramps, headaches, dizziness, or heat stroke in athletes. Ways to determine hydration levels include analysis of the urine, blood, or sweat, body weight changes, skin elasticity tests, and increases in core temperature. Patent search, research journals, and outside studies in the health and fitness market showed that a convenient and continuous hydration monitoring system was not available. Changes in core body temperature proved to be the quickest way to measure hydration levels. The HydroBand system is geared towards athletes …

Shotblocker® - Bionix® Senior Design, Samuel Dockery

Williams Honors College, Honors Research Projects

No abstract provided.

Polymer Interactions With Nucleic Acids Under Various Physiological Conditions, Matthew S. Obrzut

Williams Honors College, Honors Research Projects

The goal of this project is to improve our understanding of nucleic acid interactions with cationic polymers with the theory that the polymers could protect the nucleic acids from degradation caused by biological enzymes. We seek to understand what the limitations of the cationic polymers are which, in this case, is mainly polymer-DNA compatibility. This experiment utilized peptide-dextran hybrid polymers with differing functionalizations to condense anionic nucleic acids into nanometer-sized polyplexes. Techniques of dynamic light scattering and zeta-potential were utilized to determine the particle sizes and surface charges of polyplexes.

In this experiment, dextran with a molecular weight of 20 …

Evaluation Of Tissue-Engineered Tendon Enthesis Polymer Constructs, Joshua A. Bundy Bs, Mary Beth Wade Phd, Hitomi Nakao Md, Phillip Mcclellan Phd, Qing Yu Phd, Robin Jacquet-Childs Ms, William J. Landis Phd

Williams Honors College, Honors Research Projects

Both scientists and clinicians have proposed tissue engineering as the future of medicine. The possibilities for tissue engineering, that is, fabrication of tissues and organs in the laboratory and their translation to patients, appear to be endless, and many believe that this new approach in medicine will result in abolishing many common ailments, injuries, and congenital defects. Injuries to a tendon enthesis, the normal tissue connection between tendon and bone, are of particular concern to clinicians because of their frequency and failure to repair as a result of surgery. While these injuries may not be life threatening, they can certainly …