Engineering Commons^™

Characteristics Of Activated Carbons Produced From Herbaceous Biomass Feedstock, Oluwatosin Jerry Oginni

Graduate Theses, Dissertations, and Problem Reports

Energy security and environmental protection are at the forefront of research due to the forecasted depletion of fossil fuel reserves and the growing concern of its adverse environmental impacts. The use of renewable sources for energy applications has centered on the use of biomass feedstocks and this include from herbaceous, woody, agricultural waste, forest residues and municipal wastes. The thermochemical conversion (pyrolysis) of these biomass feedstocks has potential to produce liquid fuel, a solid residue (biochar) and non-condensable gas. The biochar is primarily composed of renewable porous carbon and other inorganic compounds. The biochar is used for soil amendment, adsorption …

Managing Exoelectrogenic Microbial Community Development Through Bioprocess Control For Conversion Of Biomass-Derived Streams, Alex James Lewis

Doctoral Dissertations

Bioelectrochemical systems are an emerging technology capable of utilizing aqueous waste streams generated during biomass conversion of lignocellulosic feedstocks to produce valuable co-products and thus, have potential to be integrated into biorefineries. In a microbial electrolysis cell, organic compounds are converted to electrons, protons, and CO₂ by fermentative and exoelectrogenic bacteria in the anode compartment. By having the ability to extract electrons from waste streams, these systems can treat water while also producing hydrogen, and thus can improve the efficiency of biomass to fuel production by minimizing external hydrogen requirement and enabling water recycle. The overall goal of this …

Marine Biomass Analyzer, Kai Jay Staal, Brian Paris, Tyler Cottle

Mechanical Engineering

This report documents the design, fabrication, and testing for a marine biomass analyzer. The goal of the project and constructed system was to determine the validity and efficacy of a process that could flatten benthic macrofauna to a consistent thickness such that a biomass for the collected sample could be accurately determined. The system that was built and tested consists of a drive train that turns a mill subassembly where the organisms are flattened, supply and collection spools that hold the white fabric and clear film used to capture the organisms, a collection zone where the sample is injected, and …

Assessing The Limitations And Capabilities Of Lidar And Landsat 8 To Estimate The Aboveground Vegetation Biomass And Cover In A Rangeland Ecosystem Using A Machine Learning Algorithm, Shital Dhakal

Boise State University Theses and Dissertations

Remote sensing based quantification of semiarid rangeland vegetation provides the large scale observations required for monitoring native plant distribution, estimating fuel loads, modeling climate and hydrological dynamics, and measuring carbon storage. Fine scale 3-dimensional vertical structural information from airborne lidar and improved signal to noise ratio and radiometric resolution of recent satellite imagery provide opportunities for refined measurements of vegetation structure.

In this study, we leverage a large number of time series Landsat 8 vegetation indices and lidar point cloud - based vegetation metrics with ground validation for scaling aboveground shrub and herb biomass and cover from small scale plot …

Production And Harvest Of Microalgae In Wastewater Raceways With Resource Recycling, Alexander Colin Roberts

Master's Theses

Microalgae can be grown on municipal wastewater media to both treat the wastewater and produce feedstock for algae biofuel production. However the reliability of treatment must be demonstrated, as well as high areal algae productivity on recycled wastewater media and efficient sedimentation harvesting. This processes was studied at pilot scale in the present research.

A pilot facility was operated with nine CO₂-supplemented raceway ponds, each with a 33-m² surface area and a 0.3-m depth, continuously from March 6, 2013 through September 24, 2014. The ponds were operated as three sets of triplicates with two sets continuously fed …

Characterization Of Two Biochars Derived From Horse Muck And Their Ability To Reduce Pathogen Transport In Soil, David Griffith

Theses and Dissertations--Biosystems and Agricultural Engineering

Biochars have been created and characterized from a variety livestock manure biomass including poultry, dairy, and swine. However, no research has been conducted on the physical and chemical makeup of biochar pyrolyzed from horse muck. Two horse muck derived biochars containing either straw (HS) or woodchip (HW) bedding were pyrolyzed at 700°C and characterized for their physical and chemical properties. Tests revealed both biochars had high alkalinity, moderate specific conductivity, and low surface area as compared to other biochars in the literature. HS contained more mineral structures than HW. Scanning electron microscopy presented differences in particle shape, size, and presence …

Effect Of Plant Hormones On The Production Of Biomass And Lipid In Microalgae, Malihe Mehdizadeh Allaf

Electronic Thesis and Dissertation Repository

Limited fossil fuel reserves, increasing demand for energy in all parts of the world are some driving forces to look for new sources of transportation fuels. Among different options available, microalgae are currently attracting wide interests as an alternative and renewable fuel source.

Microalgae are single cell photosynthetic organisms that are known for rapid growth and high energy content and as a part of photosynthesis; they produce oil that can be used as a feedstock for biodiesel production. Some algae strains could contain lipid up to 80% of the dry biomass. The amount of lipid production is in direct relation …

Design And Use Of An Adjustable Clearance Flailing Knife Biomass Shredder To Mechanically Increase Particle Surface Area, Shawn Gregory Ehlers

Open Access Theses

A flailing knife shredder was designed and tested as an alternative to a hammermill for processing biomass. The machine was comprised of two cylinders with four rungs, each with five free-swinging blades. Each of the two cylinders had adjustable clearance hoods and variable speed drives. Energy usage, output characteristics and device capacities were compared with corn stover processed at moisture contents (MC) of 10%, 35% and 50% wet basis (WB). The hammermill produced a more uniform particle size distribution in comparison to the shredder. Accessibility, indicated by conductivity index, to plant constituents, revealed that the method of treatment was not-significant …

Economic Modeling & Optimization Of A Region Specific Multi-Feedstock Biorefinery Supply Chain, William H. Faulkner

Theses and Dissertations--Manufacturing Systems Engineering

The objective of this thesis is to include strategic and tactical level decisions into the biorefinery supply chain design for a specific region while comparing multiple conversion technologies and biomass feedstocks. The allocation of biomass feedstocks, products, and the respective supply chain configuration locations are determined while ensuring the regions monthly biomass availability and product market demand constraints are met. This research considers all actions required to bring the bio-based products to market from harvesting, storing, and processing the biomass to market distribution. Two different conversion technologies are chosen for comparison: one advanced conversion technology and one conventional technology. Potential …