Engineering Commons^™

Processes & Toolchain For Automation Of Hybrid Direct-Write 3d Printing, Gilbert Thomas Carranza

Open Access Theses & Dissertations

Hybrid 3D printing has evolved from a means to rapidly prototype devices to a fully viable means of manufacturing final products. In particular, electronic and electromagnetic devices have been a focus of hybrid 3D printing multi material structures. However, while the hardware capabilities have been around for years, the software capabilities have only begun to catch up. A process and toolchain for hybrid 3D printing is critically needed.This work details a process and toolchain for hybrid 3D printing metal dielectric structures. In it, a basic slicing algorithm is shown along with off-axis printing and conformal printing for arbitrary curvatures. These …

Pioneering Concepts For 3d Electromagnetics, Cesar Valle

Open Access Theses & Dissertations

This work introduces two paradigm changing concepts that will push electromagnetics (EM) to the third dimension. The first of that work involves the introduction of the conformal Spatially Variant Lattice (SVL) algorithm that can conform any periodic structure onto arbitrary curvature. The algorithms robustness is confirmed by conforming a frequency selective surface (FSS) onto an extreme paraboloid, proving the algorithms robustness on high sloping surfaces. Three FSSs were made in total; a standard flat FSS, a projected FSS, and a FSS made through the conformal SVL algorithm. Measured results are shown and match well to simulation.Secondly, in the world of …

Algorithms For Exploration Of Advanced Electromagnetic Concepts, Asad Ullah Hil Gulib

Open Access Theses & Dissertations

3D printing is revolutionizing the manufacturing industry and is now being considered in the electronics industry. The creation of the worldâ??s first 3D volumetric circuit has made a way to make circuits smaller, lighter, into unconventional form factors and exploit physics like anisotropy more effectively than planar geometries can. While this is exciting, many problems must be solved to make 3D volumetric circuits more efficient. One of these problems is electromagnetic interference and mutual coupling between the circuit components that are expected to increase in high-frequency 3D circuits. Spatially variant anisotropic metamaterials (SVAMs) could be a solution to overcome this …

Independent And Simultaneous Control Of Electromagnetic Wave Properties In Self-Collimating Photonic Crystals Using Spatial Variance, Jesus Javier Gutierrez

Open Access Theses & Dissertations

Photonic crystals are engineered periodic structures that provide great control over electromagnetic waves. One of these mechanisms is self-collimation, in which the electromagnetic wave travels through the photonic crystal along an axis of the lattice without diffracting or spreading. This mechanism of self-collimation is a dispersion phenomenon, which is dependent on the unit cell's physical and geometrical characteristics. An algorithm for generating spatially variant lattices (SVL) was developed that can change geometrical properties in photonic crystals as a function of position, like unit cell orientation, fill fraction, symmetry, and others in a manner that is smooth, continuous, and virtually free …

Formulation And Implementation Of Iterative Method For Generating Spatially-Variant Lattices, Manuel Fernando Martinez

Open Access Theses & Dissertations

The use of a matrix-free, memory-efficient approach to generate large-scale spatially variant lattices (SVL) was explored. A matrix-free iterative SVL generation algorithm was formulated and then implemented with a tremendous memory reduction observed. The algorithm consists of solving first-order central finite-differences along the entirety of the problem space point-by-point to obtain the grating phase function Φ(𝑠⃗) to which all desired spatially variant lattice properties are applied to. The algorithm was studied to identify key areas of data and task parallelism to exploit in heterogeneous computing systems consisting of clusters of central processing units (CPU) and graphics processing units (GPU) combinations. …

Hybrid 3d Printing Demonstrated By Arbitrary 3d Meandering Transmission Lines, Ubaldo Robles

Open Access Theses & Dissertations

This Dissertation focuses on the automation of multi-material direct write three-dimensional (3D) manufacturing of arbitrary metal-dielectric structures. The technology was demonstrated by manufacturing 3D meandering interconnects and transmission lines (TLs). Manufacturing 3D functional electronics with multiple materials required pushing the current state of 3D printing (3DP) technology to utilize simultaneous multi-material processes combined with sophisticated slicing and bonding under one process. Multi material 3DP is known as hybrid 3DP. This research pioneered the process for producing meandering transmission lines, starting with design and manufacturing, using hybrid 3DP through micro-dispensing and fuse deposition modeling. The research starts by 3DP magnetic and …

Magnetotelluric Analysis Of Central Kenya Kenyan Rift Volcanoes For Geothermal Development, Anna Wairimu Mwangi

Open Access Theses & Dissertations

Abstract

High temperature geothermal resources are vast along rift margins because of emplacement of magma in shallow crust. This is the case along the Kenyan Rift valley also known as the Gregory Rift. It is the Eastern arm of the East African rift and a chain of volcanoes along the rift graben characterizes it. We use (MT) magnetotelluric method to image beneath the peralkaline province of the Kenya Rift i.e. Olkaria, Eburru, Badlands, and Longonot volcanoes. The resistivity structure shows active geothermal activity happening at the upper 3km from the subsurface as evidenced by low resistivity cap rock comprised of …

Parallelization And Scalability Analysis Of The \\[1pc] 3d Spatially Variant Lattice Algorithm, Henry Roger Moncada Lopez

Open Access Theses & Dissertations

The purpose of this research is to design a faster implementation of an algorithm to generate 3D spatially variant lattices (SVL) and improve its performance when it is running on a parallel computer system. The algorithm is used to synthesize a SVL for a periodic structure. The algorithm has the ability to spatially vary the unit cell, the orientation of the unit cells, lattice spacing, fill fraction, material composition, and lattice symmetry. The algorithm produces a lattice that is smooth, continuous and free of defects. The lattice spacing remains strikingly uniform even when the lattice is spatially varied. This is …

Dielectric Prism Antenna, Jose Antonio Avila

Open Access Theses & Dissertations

3D printing is revolutionizing the development and manufacturing of devices. Currently multi-material 3D printing, like metals plus dielectrics, is in the early stages and not very accessible. This work set out to develop an all-dielectric antenna that could be 3D printed with current widely accessible 3D printing technologies. The antenna developed is an all-dielectric ultra-thin antenna with a simple geometry. The antenna radiates by using total internal reflection and a circulating mode operating as a leaky whispering gallery mode. We are calling the antenna the dielectric prism antenna because it acts like an optical prism. The dielectric prism antenna was …

Towards The Scalability And Hybrid Parallelization Of A Spatially Variant Lattice Algorithm, Henry Roger Moncada Lopez

Open Access Theses & Dissertations

The purpose of this research is to design a faster implementation of the spatially variant algorithm that improves its performance when it is running on a parallel computer system.

The spatially variant algorithm is used to synthesize a spatially variant lattice for a periodic electromagnetic structure. The algorithm has the ability to spatially vary the unit cell orientation and exploit its directional dependencies. The algorithm produces a lattice that is smooth, continuous and free of defects. The lattice spacing remains strikingly uniform when the unit cell orientation, lattice spacing, fill fraction and more are spatially varied. This is important for …

Numerical Calculation Of Spatially Variant Anisotropic Metamaterial, Asad Ullah Hil Gulib

Open Access Theses & Dissertations

3D printing, or additive manufacturing, is rapidly evolving into a mainstream manufacturing technology that is creating new opportunities for electromagnetics and circuits. 3D printing permits circuits to fully utilize the third dimension allowing more functions in the same amount of space and allows the devices to have arbitrary form factors. 3D printing is letting us discover new physics that is not possible in standard 2D circuits and devices. However, evolving electromagnetics and circuits into three dimensions introduces some serious problems like thermal management, interference, and mutual coupling between the components which degrades performance and hurts signal integrity.

Metamaterials are engineered …

Development Of Rigorous Electromagnetic Simulation Tools For Anisotropic Structures, Jose Luis Enriquez

Open Access Theses & Dissertations

Many times, mankind's creative nature has pushed the envelope beyond what was deemed physically possible at the time. People have engineered ways for us to fly, communicate across the globe in seconds, landed on the moon, and more recently discovered ways to make an object invisible. Unfortunately, there are times that this creativeness is hindered by funding, access to required tools or a combination of both. While this work cannot provide funding, it does provide a tool that one could use to model and simulate a variety of media. The media can vary from devices already being implemented to more …

Modeling And Preliminary Characterization Of Passive, Wireless Temperature Sensors For Harsh Environment Applications Based On Periodic Structures, Diego Ivan Delfin Manriquez

Open Access Theses & Dissertations

Wireless temperature sensing has attained significant attention in recent years due to the increasing need to develop reliable and affordable sensing solutions for energy conversion systems and other harsh environment applications. The development of next generation sensors for energy production processing parameters, such as temperature and pressure, can result in better performance of the system. Particularly, continuous temperature monitoring in energy conversion systems can result in enhancements such as better system integrity, less pollution and higher thermal efficiencies. However, the conditions experienced in these system components hinder the performance of current solutions due to the presence of semi-conductor materials and …

3d Printed Electromagnetic Transmission And Electronic Structures Fabricated On A Single Platform Using Advanced Process Integration Techniques, Paul I. Deffenbaugh

Open Access Theses & Dissertations

3D printing has garnered immense attention from many fields including in-office rapid prototyping of mechanical parts, outer-space satellite replication, garage functional firearm manufacture, and NASA rocket engine component fabrication. 3D printing allows increased design flexibility in the fabrication of electronics, microwave circuits and wireless antennas and has reached a level of maturity which allows functional parts to be printed. Much more work is necessary in order to perfect the processes of 3D printed electronics especially in the area of automation. Chapter 1 shows several finished prototypes of 3D printed electronics as well as newly developed techniques in fabrication. Little is …

Digitally Manufactured Spatially Variant Photonic Crystals, Javier Jair Pazos

Open Access Theses & Dissertations

Metamaterials and photonic crystals are engineered composites that exhibit electromagnetic properties superior to those found in nature. They have been shown to produce novel and useful phenomena that allow extraordinary control over the electromagnetic field. One of these phenomena is self-collimation, an effect observed in photonic crystals in which a beam of light propagates without diffraction and is forced to flow in the direction of the crystal. Self-collimation however, like many of the mechanisms enabled through dispersion engineering, is effective in directions only along the principal axes of the lattice. To this effect, a general purpose synThesis procedure was developed …

3d Printed Spatially Variant Metamaterials, Cesar Roman Garcia

Open Access Theses & Dissertations

The recent advancement in 3D printing has created a new way to design electronics and electromagnetic devices. This allows for a new breed of non-planar designs to be used, fully exploiting all three dimensions like never before. More functions can be fit into the same amount of space, products with novel form factors can be more easily manufactured, interconnects can be routed more smoothly, interfaces can be better implemented, electrical and mechanical functions can be comingled, and entirely new device paradigms will be invented. When departing from traditional planar topologies many new problems arise like signal integrity, crosstalk, noise, and …

Surface Plasmon Polaritons And Waveguide Modes At Structured And Inhomogeneous Surfaces, Javier Polanco

Open Access Theses & Dissertations

In chapter 1, properties of a p-polarized surface plasmon polariton are studied, propagating circumferentially around a portion of a cylindrical interface between vacuum and a metal, a situation investigated earlier by M. V. Berry (J. Phys. A: Math. Gen. 8, (1975) 1952). When the metal is convex toward the vacuum this mode is radiative and consequently is attenuated as it propagates on the cylindrical surface. An approximate analytic solution of the dispersion relation for this wave is obtained by an approach different from the one used by Berry, and plots of the real and imaginary parts of its wave number …

Dielectric And Complex Impedance Properties Of Tetravalent Hafnium (Hf 4+) Integrated Cobalt Ferrite, Luis Javier Sanchez

Open Access Theses & Dissertations

The work presented in this thesis was carried out to understand the effects of tetravalent hafnium (Hf4+) ion on the crystal structure and phase, surface morphology, electrical, dielectric and complex impedance properties of cobalt ferrite (CoFe2O4; CFO). Hafnium incorporated cobalt ferrite, CoFe2-xHfxO4, with x = 0.00, 0.05, 0.075, 0.10, 0.15 and 0.20 were prepared by the standard solid state ceramic synthesis method. X-ray diffraction (XRD) and scanning electron microscopy (SEM) characterizations were performed to determine the structural properties. Most important aspect of this study is to explore the dielectric and complex impedance properties as a function of variable temperature (T=300-1000 …

3d Printed Impedance Elements By Micro-Dispensing, Ubaldo Robles Dominguez

Open Access Theses & Dissertations

Micro-dispensing allows electric circuits to be "3D printed," which can be used to give 3D printed systems electronic and electromagnetic functionality. The focus of this thesis is using micro-dispensing to fabricate capacitors and inductors. 3D printed impedance elements are capable of being more easily embedded, can be used to create structural electronics, and will have extensive applications in antennas, metamaterials, frequency selective surfaces, and more. This is the first known effort to print and measure impedance elements by micro-dispensing which holds great potential for manufacturing multi-material devices.

Surface And Guided Waves On Structured Surfaces, Javier Polanco

Open Access Theses & Dissertations

Surface and guided waves on structured surfaces and inhomogeneous media studies the propagation of waves in systems with spatially varying parameters. In the rainbow case (chapter 1), the dielectric constant changes with coordinates. In the cylinder case: boundary and the metal (chapter 2), it is a curved surface. Finally, in the last case (chapter 3), the dielectric constant changes in z-direction.

12 Bit Charge Redistribution Digital To Analog Converter For The Residence Time Fluxgate Magnetometer, Miguel Angel Alamillo

Open Access Theses & Dissertations

The continuous advances in CMOS VLSI technology have culminated in high speed, low voltage CMOS digital circuits with gate delays below 50 ps at 1.5 V supply. At the same time, high voltage analog signal processing has fallen behind to the high flexibility and high reliability of DSP. However, the main drawback of DSP is the need for high accuracy low distortion data converters and as a consequence of the persistent efforts of reducing size, cost and power of solid-state components the field of CMOS Mixed-Signal circuit design has become of the utmost importance.

The obvious functionality of data converters …

Temperature-Induced Phenomena In Systems Of Magnetic Nanoparticles, Abdul Wazed Bhuiya

Open Access Theses & Dissertations

Magnetic nanoparticle ensembles have received a lot of attention, stemming in part from their current and potential applications in biomedicine and in the development of high-density magnetic storage media. Key to the functionality of these systems are microscopic structures and mechanisms that make them exhibit unique properties and behave differently from their bulk counterparts.

We studied microscopic structures and processes that dictate macroscopic properties, behavior and functionality of magnetic nanoparticle ensembles. As the temperature T strongly influences the magnetic behavior of these systems, we studied temperature dependent magnetic properties using AC-susceptibility and DC-magnetization measurements carried out over a broad range …