Engineering Commons^™

Impacts Of Climate Changes On The Spatiotemporal Distribution Of Precipitation In The Western United States, Peng Jiang

UNLV Theses, Dissertations, Professional Papers, and Capstones

Precipitation in the Intermountain West is characterized by its great variability in both spatial and temporal distributions. Moreover, the spatiotemporal distribution of the precipitation is changing due to the climate changes. In this dissertation, three studies are conducted to investigate the multi-scale temporal variability of precipitation, the performance of current climate models on this variability, the influence of large-scale ocean oscillations on heavy precipitation, and the impact of human induced global warming on storm properties.

The first study is to examine the performance of current climate models on the simulation of the multi-scale temporal variability determined from the observed station …

Evaluation Of Alternative Project Delivery Methods In Water And Wastewater Projects, Ruiko Maharjan

UNLV Theses, Dissertations, Professional Papers, and Capstones

The United States (U.S.) is facing significant challenges in addressing aging water infrastructure. Most of the drinking water infrastructure is reaching the end of their useful lives. The American Water Works Association (AWWA) estimated that it will cost about $1 trillion to repair or replace drinking water pipes. Over the next 20 years, it will cost about $298 billion to fix or expand pipes of the nation's wastewater and storm-water systems (AWWA, 2012). Owners, engineers, and contractors are using Alternative Project Delivery (APD) methods - e.g., Design-Build Construction Management-at-Risk Construction Management/General Contractor- to build water and wastewater projects in order …

Feasibility Of The Use Of Ultrasound Measurements For Grade Verification Of The Performance Grade Asphalt Binders, Mehdi Khalili

UNLV Theses, Dissertations, Professional Papers, and Capstones

This research investigates the feasibility of application of high frequency immersion ultrasonic measurement (UM) to discriminate different performance grade (PG) asphalt binders. PG asphalt binder is one of the main components of hot mix asphalt used for roadway construction. UT may provide an inexpensive alternative to sophisticated tests currently used for quality control of PG asphalt binders. Nine different PG asphalt binders used were selected for this investigation. Velocity (V) and integrated response (IR) of the ultrasonic wave were measured. The IR is a measure of the ratio of ultrasonic energy transmitted into the material to the ultrasonic energy reflected …

A Case Study Of Zero Energy Home Built For Solar Decathlon Competition 2013, Sanjib Mulepati

UNLV Theses, Dissertations, Professional Papers, and Capstones

Energy consumption in residential homes has been a subject of research related to sustainability. Reduction in the consumption of energy is a goal of sustainable construction. The Department of Energy (DOE) started a Solar Decathlon competition in 2002 in which the students from different universities around the globe build an energy efficient and affordable home suitable for their climate and location. The main goal of this competition is to select the best home that is designed and built in a sustainable way. In this study, the home designed and constructed for participation in the competition by the students at University …

Performance Comparison Of Design-Build And Construction Manager/General Contractor Highway Projects, Binita Shakya

UNLV Theses, Dissertations, Professional Papers, and Capstones

Researchers have conducted numerous studies comparing project performance of design-bid-build (DBB) and design-build (DB) highway projects. However, little research has been done to compare the performance of DB and construction manager/general contractor (CM/GC) highway projects. Therefore, an exploratory study was conducted to compare the performance of 55 DB and 34 CM/GC highway projects from various States Departments of Transportation (DOTs) in terms of cost, change orders, and construction intensity. The results showed that contract award cost growth was significantly lower in DB projects than in CM/GC projects. In contrast to this, the total cost growth of DB projects was higher …

A Comparative Study Of Performance, Impediments, Advantages, And Disadvantages Of Construction And Professional Disadvantaged Business Enterprises, Ravi Sharma

UNLV Theses, Dissertations, Professional Papers, and Capstones

Construction and professional disadvantaged, minority, and women business enterprises (DBE/MBE/WBEs) face several impediments that hinder their business growth. A questionnaire survey was conducted to determine the important factors that affect their business performance, impediments faced by these business enterprises, advantages, and disadvantages of being DBE (DBE will be an umbrella designation for DBE, MBE, and WBE). This study compares the difference in responses from these two groups. A total of 333 business enterprises responded to the questionnaire. The survey results showed that construction firms gave significantly higher importance to "financial" issues and "safe work practices" as their most important factors …

Implementation Of Integrated Project Delivery On Department Of Navy Military Construction Projects, Christopher S. Lee

UNLV Theses, Dissertations, Professional Papers, and Capstones

The concept of the project delivery system refers to the overall processes by which a project is designed, constructed, and/or maintained. There are many different types of project delivery systems to fit particular situations involving the owner and his intended project. The project delivery system is what establishes the framework that enables a construction project to be developed and ultimately executed.

The construction industry has observed that projects (both private and public) frequently suffer from factors such as adversarial relationships, low roductivity, high inefficiency and rework, frequent contractual disputes concerning who was at fault, and lack of innovation. Not only …

Calibration Of Microscopic Traffic Flow Models Considering All Parameters Simultaneously, Victor Hugo Molano Paz

UNLV Theses, Dissertations, Professional Papers, and Capstones

This study proposes a methodology to calibrate microscopic traffic flow simulation models. The proposed methodology has the capability to calibrate simultaneously all the calibration parameters as well as demand patterns for any network topology. These parameters include global and local parameters as well as driver behavior and vehicle performance parameters; all based on multiple performance measures, such as link counts and speeds. Demand patterns are included in the calibration framework in terms of turning volumes.

A Simultaneous Perturbation Stochastic Approximation (SPSA) algorithm is proposed to search for the vector of the model‟s parameters that minimizes the difference between actual and …

Phosphorus Removal From Ebpr Sludge Dewatering Liquors Using Lanthanum Chloride, Aluminum Sulfate And Ferric Chloride, Michael Strileski

UNLV Theses, Dissertations, Professional Papers, and Capstones

In wastewater treatment, enhanced biological phosphorus removal (EBPR) is becoming an increasingly popular alternative to chemical precipitation (CP) because of its lower costs and reduced sludge production. However, downstream solids handling processes such as digestion, sludge storage and dewatering promote an undesirable release (i.e. secondary release) of polyphosphate that was stored within EBPR sludge. Released phosphate is recycled to the head of the plant with the liquors of sludge dewatering processes. The concentration of phosphate in recycle streams from EBPR systems can be one to two orders of magnitude higher than the influent phosphorus concentration entering the EBPR system. Plants …

Ultrasonic Pulse Velocity Investigation Of Steel Fiber Reinforced Self-Compacted Concrete, Belayhun Tesfaye Gebretsadik

UNLV Theses, Dissertations, Professional Papers, and Capstones

Concrete is a basic material used for a number of applications in civil engineering projects. Structural concrete is brittle material under normal conditions. Therefore, by adding short and randomly distributed steel fibers, it is possible to improve the ductility and other basic properties of concrete. However, the addition of steel fibers results in loss of workability of the concrete, especially in self-compacted concrete. Therefore, in this study, ADVA-140 high range water reducer (HRWR) superplasticizer was added to improve the workability of self-compacted (SC), steel-fiber-reinforced concrete (SFRC). The amount of superplasticizer varied with the volume percentage of fiber for the beams; …

Investigating The Feasibility Of Growing Algae For Fuel In Southern Nevada, Faegheh Moazeni

UNLV Theses, Dissertations, Professional Papers, and Capstones

Microalgae capable of growing in waste are adequate to be mass-cultivated for biodiesel, avoiding fertilizers and clean water, two obstacles to sustainability of the feedstock production. This study replaces fertilizers and clean water with waste products. The investigated wastes include (1) the liquid fraction of sewage after solids and particles are removed, known as centrate, and (2) algal biomass residue, i.e. the algae remaining at the end of the lipids extraction process at biofuel plants. These wastes contain sufficient amount of nitrogen and phosphorus required for algal growth. This study proposes a system in which centrate would be used as …

Investigation Of Crashes And Identifying The Best Practices For Setting Up Speed Zones In Towns Along Rural Highways In Nevada, Krishna Prasad Shrestha

UNLV Theses, Dissertations, Professional Papers, and Capstones

In 2010, 51,664 crashes occurred in Nevada. Only about 9% of those crashes occurred in rural areas of the state. However, if only fatal crashes are considered, 41% of those fatal crashes occurred in rural areas. Generally, speed zones are provided in towns along rural highways to reduce speed-related crashes. However, a guideline is necessary for a consistent procedure to setup speed zones throughout the state. The main objectives of this study are to determine factors associated with crashes and to identify the best practices for setting up speed zones in towns along rural highways.

Eleven towns along rural highways …

Initial Elastic Modulus Degradation Using Pressuremeter And Standard Penetration Test Results At Two Sites, Dustin Robbins

UNLV Theses, Dissertations, Professional Papers, and Capstones

In-situ testing was performed at two sites consisting of pre-bored pressuremeter testing, seismic surface wave testing to develop a shear wave velocity profile, and Standard Penetration testing during the soil boring phase in order to evaluate the feasibility of using large shallow foundations for a project. This study focuses on a comparison of the in-situ direct measurements of soil stiffness obtained from this testing program. The small strain modulus obtained from the seismic surface wave test results is compared to the intermediate strain modulus obtained from both the initial loading pressuremeter modulus and reload pressuremeter modulus. The modulus calculated from …

Performance Of Concrete Incorporating Colloidal Nano-Silica, Mohamed Sabry Zeidan

UNLV Theses, Dissertations, Professional Papers, and Capstones

Nanotechnology, as one of the most modern fields of science, has great market potential and economic impact. The need for research in the field of nanotechnology is continuously on the rise. During the last few decades, nanotechnology was developing rapidly into many fields of applied sciences, engineering and industrial applications, especially through studies of physics, chemistry, medicine and fundamental material science. These new developments may be attributed to the fact that material properties and performance can be significantly improved and controlled through nano-scale processes and nano-structures. This research program aims at 1) further understanding the behavior of cementitious materials when …

Evaluation Of Geometric Design Needs Of Freeway Systems Based On Safety And Geometric Data, Eneliko Mujuni Mulokozi

UNLV Theses, Dissertations, Professional Papers, and Capstones

Freeways are arterial highways characterized by high levels of safety and high speed vehicular traffic. Access to and from the freeways is provided through ramps. Geometric elements making up freeway facilities include the roadway, median shoulders, grades, and ramps to and from the traveled way at selected locations, shoulders, radius of curvature, lane width, and speed-change lanes. With the increase of traffic using the freeway systems, there arises more traffic weaving movements within the elements making up the freeway systems. This causes traffic flow to compete at the limited spaces available and reduces safety performance of freeway system.

In studies …