Engineering Commons^™

An Experimental Investigation Of The Continuous Penetration Of A Blunt Body Into A Simulated Cohesionless Soil., John Lewis Colp

Civil Engineering ETDs

The penetration of one object into a larger mass may well have been one of the earliest interests of man. History shows that early man was well aware of the occurrence of the penetration event by his use of spears and other projectiles in his search for food. Interest in penetration events has been continuous through man's development. Today this interest has even outstripped man's natural environment to include the serious study of penetration into extra-terrestrial bodies such as the lunar surface.

The Problem:

The penetration of many materials is currently being studied by many investigators. Some of the materials …

A Preliminary Experimental Study Of The Turbulence Decay In The Wake Of A Hemisphere In Free-Surface Flow, Jiin-Jen Lee

All Graduate Plan B and other Reports, Spring 1920 to Spring 2023

Flows observed in open channels are usually turbulent. The word "turbulent" describes a motion in which an irregular velocity fluctuation (mixing or eddying motion) is superimposed on the main stream motion. The essential characteristic of turbulent flow is that the turbulent fluctuations are random in nature.

If Reynold's rule of averaging is used, the Navier-Stokes equations for laminar flow may be transformed into the Reynold's equations, which hold true for turbulent mean motion. The solution of Reynold's equations will properly describe turbulent flow. Unfortunately, the number of unknowns exceeds the number of equations; therefore the use of mathematical method to …

Streaming Current And Streaming Potential Induced By Water Flow Through Porous Media, Mohamed M. I. Abaza

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

This study was conducted to investigate analytically and experimentally the relationship between the rate of flow of water through porous material and the streaming current and streaming potential induced by this flow. The effect of dissolved salts in the permeating solution and the size of the soil particles was also investigated.

Results and conclusions of this study are summarized as follows:

1. A modified procedure using the appropriate delay to insure stead state conditions was used for the measurements of both streaming current and streaming potential.
2. The flow-pressure relationship was the same irrespective of the counter electro-osmosis (resulting from the streaming …

Electronic Computer Program For The Solution Of Slope Stability By The Wedge Method Of Analysis., James O. Boardman

Civil Engineering ETDs

Earth embankments and the foundation upon which they rest are subject to abear stresses induced by their own weight. It the embankment serves as a water retention structure, additional shear stresses are developed by seepage forces originating from pore pressure, from the reservoir pool and from rainfall. In certain regions, earthquake forces must also be added to these gravity and water forces.

Prior to the turn or the century and tor thirty some years after, earth dam side slopes were selected on the basis of past experience in lieu of a theoretical analysis. Justin, a noted authority on earth dam …

Plastic Design Of Steel Frames For Minimum Weight, I-Chen Hung

Masters Theses

"The purpose of this study was to develop a method for weight minimization of the plastically designed frame, braced normal to its plane of action, and composed of prismatic steel members. The method accounts for the non-linear relationship between weight and moment capacity for both beams and columns. Reduction in the pure-bending fully-plastic moment in the presence of axial loading and both beam-column instability and overall frame instability due to sidesway are taken into account. Provision is made for minimization of frames employing standard sections as well as for frames whose built-up members may be chosen from a continuous spectrum. …

The Effect Of Epoxy Resins On The Durability And Unconfined Compressive Strength Of An A-1b Soil, Guy H. Payne

Masters Theses

"This thesis reports the procedure and results obtained from the stabilization of a clean poorly graded sand with various amounts of epoxy resin. The same soil was also stabilized with varying amounts of Portland cement in order to have a basis for comparison of the results obtained. The sand used in this research came from the Meramec River in Central Missouri and is classed as an A-lb soil by the AASHO classification system. The following tests were performed on the stabilized samples: 1. Specimens were molded and compacted at 4%, 6%, 8%, 10% and 12% portland cement by weight of …

The Development Of A Modified Soil Shear Vane, Vernelle Truman Smith

Masters Theses

"The purpose of this investigation was to determine how the soil shear graph could be modified to measure more accurately values of shear strength of fine-grained, cohesive soils. Several modifications were tried, however, the one that gave the most satisfactory results consisted of a vane and base plate mechanism.

A red clay of high plasticity obtained from a local cave was tested in both the natural or undisturbed state and in the remolded state. The only variable was the moisture content. Compaction effort was the same for all remolded specimens. Tests were conducted on undisturbed samples taken with thin walled …

Checking Rigid-Framed Structures By Extended Moment-Area Equations, Lucky Li-Chi Chow

Masters Theses

"Using the known moments obtained from the moment distribution solution, the extended moment-area equations are used to check whether or not delta x, delta y, delta theta are truly zero, or are any other quantity they are supposed to be. In order to get a reasonably correct answer, a solution must meet both the elastic checks and the static checks for their equilibrium and compatibility functions. Using the extended moment-area equations, the magnitudes of the slopes and deflections at all of the joints in framed structures can be found easily"--Abstract, page ii.

Location Of Maximum Moments In A Continuous Two Span Beam Due To Moving Loads, Thomas Houng-Yn Yang

Masters Theses

"The objective of this investigation is to determine the positioning of vehicle wheels so as to cause maximum positive and negative moments in a two span continuous girder. Several variables are considered, namely, the ratio of loads to each other, the distance between wheels, and ratio of one span length to the other. The necessary equations are derived and the results, after being programmed on a computer, are shown in a series of curves.

These curves serve as a tool for the designer, enabling him to arrive at design moments by simple substitution in the appropriate moment expression, within the …

Modification Of The Hydraulic Jump By Submerged Jets, Edward Leon Tharp

Masters Theses

"Tests were performed in order to determine the effect of submerged jets injecting water into the base of the hydraulic jump. The jump was studied in terms of the following properties: specific energy of the flow leaving the hydraulic jump, length of the hydraulic jump, tailwater depth, and wave formation properties. These properties for the hydraulic jump with submerged jets were compared to the natural hydraulic jump.

Results of the tests indicate that: submerged jets at any angle tested tend to decrease the specific energy of the water leaving the jump and are more effective than the impulse-momentum principle indicates, …

A Numerical Method For The Solution Of Cylindrical Shell Structures, Chen-Jow Hsiao

Masters Theses

"Many studies and analyses of shell structures to date have been either so complex and laborious as to preclude their application in practical design problems or so approximate, because of basic assumptions, as to limit their scope of application. Hence, a method of shell analysis which is convenient to use, reasonable in its results and general in its application is really needed. It is the purpose of this study to supply such a method of analysis.

In this investigation it is proposed to replace the shell structure which has an infinite number of degrees of indeterminancy with an analogous framework …

The Effect Of Initial Moisture Content On The Swelling Characteristics Of Putnam Soil, William Howell Branum

Masters Theses

"The literature on swell and swell pressure in expansive soils was reviewed. The effect of initial moisture content on the swelling properties of untreated Putnam silt loam was investigated by performing free swell and swell pressure tests on specimens with varying initial moisture contents compacted to a constant dry density. The free swell tests were conducted by allowing the samples to swell freely under a low load (the weight of the plunger and the porous stone in the swelling apparatus) and measuring the volume change that resulted. The swell pressure tests were performed using two different procedures: (1) determining the …

Fluid Flow In Pipes Of Rectangular Cross Sections, Bruce Harold Bradford

Masters Theses

"Head loss due to fluid friction was measured in smooth conduits of rectangular cross section. The data covers the laminar and turbulent range. Results were compared with previous theoretical and empirical data.

The customary practice of calculating head loss in non-circular conduits by use of the friction factor obtained on an “equivalent” circular pipe was discussed. It was found that this practice is successful in square cross sections undergoing turbulent flow. In laminar flow, however, this method is not accurate"--Abstract, page ii.

A Study Of Sedimentation In A Well Regulated Major Drainage Basin - The Monongehala, Allegheny And Upper Ohio Rivers, William S. Wood

Masters Theses

"This investigation is concerned with the study of various programs employed in reducing and controlling sediment. The measures employed by the U.S. Soil Conservation and Forestry Services to control and reduce erosion, the primary source of sediment, was studied. The flood control and river navigation structures constructed and operated by the U.S. Army Corps of Engineers and the effect of these structures on sedimentation was also evaluated. State and local community regulation and control of exploited natural resources was studied to determine their influence on the generation and control of sediment.
The Allegheny, Monongehala and upper Ohio River Drainage Basin …

Mine Acid Drainage And Associated Flow Fluctuations, Henry Constantin Carroll

Graduate Theses, Dissertations, and Problem Reports

The Left Fork of Little Sandy Creek Basin, between Fellowsville

and Tunnelton, West Virginia, was surveyed for the location of mine acide

drainage sources. Thereafter, they were studied for the purposes of

planning abatement and determining the relationship between the chemical

constituents in and the discharge of mine acid drainage.

The Effect Of Epoxy Resin In Stone And Slag Concrete, James Chun-Min Chou

Masters Theses

"In concrete construction, the weight of the structure represents a large portion of the total load carried; thus, there is considerable advantage in reducing the weight of the concrete. To obtain this result, there are at least three approaches (1). The first method of producing lightweight concrete is by means of substituting a porous lightweight aggregate of low specific gravity for the ordinary aggregate. The second method relies on introducing large voids within the concrete or mortar mass; this is known as aerated, cellular or gas concrete. The third method is simply to omit the fine aggregate from the mix …

The Shrinkage Characteristics Of Plastic Clay, Edward De Santis

Masters Theses

"This investigation was conducted to determine the shrinkage properties of a clay soil whose structure had been artificially altered in the laboratory. Various percentages of dispersing and flocculating agent were added to the soil and the shrinkage curves plotted.

The shrinkage curves of the chemically treated soil were compared with those of the untreated soil. The values of the theoretical and observed shrinkage limits were also compared to determine the validity of the standard shrinkage limit test which, at present, does not take into consideration the structure of the soil.

An explanation of the differences in the shrinkage characteristics of …

An Investigation Of Consolidation On Compacted Partially Saturated Clarksville Soil, Ma-Tai Matthew Chen

Masters Theses

"The Terzaghi theory of consolidation and the assumption of his theory, pore pressure and effective stress, secondary compression and rheology were all reviewed and discussed. Eight compacted unsaturated samples made from Clarksville silty clay (CL) under different compaction efforts and moisture contents were subjected to consolidation load increments. Each load increment was maintained for 24 hours. An extra compacted sample was loaded for one month to investigate secondary compression.

From e-p curves, five settlement vs. compacted embankment height curves were derived for different compaction effort and moisture contents. These curves may be of practical use, when checked by field measurements …

Bending Of Isosceles Right Triangular Plates, Ping-Tung Huang

Masters Theses

"In this thesis the series expansion method is used to obtain the moments and deflections of an isosceles right triangular plate bent by arbitrary transverse loads. The method is based on using an antisymmetric load on a square plate. Two boundary conditions are solved and the numerical results obtained for these cases are tabulated"--Abstract, page ii.

The Effect Of Structure On The Consolidation Characteristics Of A Clay Soil, Dale E. Sukow

Masters Theses

"This paper reports the results of an investigation conducted to establish the effect of structure on the consolidation characteristics of a clay soil. Soil structure was caused to form in the soil by the addition of electrolytes to flocculate and disperse the clay fraction of the soil.

Consolidation tests were performed on specimens of the treated soil prepared at moisture contents well above the liquid limit of the soil. The consolidation data from these tests are evaluated and comparisons are made to relate the influence of structure to the consolidation characteristics of the treated soil.

The influence of structure on …

The Plastic Behavior Of Reinforced Concrete Beams With Varying Percentages Of Reinforcing Steel Symmetrically Placed, J. Leroy Hulsey

Masters Theses

"The purpose of this study is to determine the limitations of the plastic behavior of reinforced concrete beams with varying percentages of high strength steel (ASTM-A-432) cutoff in the compression region d distance beyond the point of inflection. Comparison was made with the derived equations.

Steel was placed symmetrically in order to obtain like action at critical sections. The members tested were of a propped beam nature having a total clear span of 5'6" with a 6" overhang on one end and 1'6" overhang on the other. Concentrated loads were applied so as to obtain midspan loading and fixed end …

Some Effects Of Selected Biodegradable Detergents On The Aeration Of Water And Activated Sludge, Donald Ernest Modesitt

Masters Theses

"The purpose of this study was to determine what effects the presence of selected biodegradable detergents have on the aeration of water and the activated sludge process for aerobic wastewater treatment. The detergents studied were LAS #1, Alfol, and Nalkylene. It was of particular interest to determine if these detergents decreased the oxygen absorptive capacities of water and wastewater. If detrimental effects were produced by the detergents it was then desired to determine if these effects were serious enough to create problems with aerobic wastewater treatment and aeration in receiving bodies of water.

A two liter volume of the liquids …

Analysis Of Sand Asphalt Mixtures, Maurice A. Sayegh

Masters Theses

"The objective or this investigation was to determine the optimum percent of asphalt which should be added to the sand asphalt mixture. Also the effects of filler on the properties or the sand-asphalt mixture were evaluated.

The variables in this study were mineral filler, asphalt cement, and asphalt content. The sand used in this study was sub-rounded, and uniformly graded. The asphalt was asphalt cement with two different penetrations, one of 85-100 penetration grade and the other of 120-150 penetration grade.

Three different groups of mixtures of sand-asphalt were prepared. The first group consisted of adding 85-100 penetration asphalt to …

Some Effects Of Sodium Pentachlorophenol On Activated Sludge And Minnows., James Albert Heidman

Masters Theses

"The primary purpose of this investigation was to determine the effect of sodium pentachlorophenol on activated sludge. An additional objective was to determine the toxicity of sodium pentachlorophenol to minnows.

All activated sludge units were grown on a glucose and mineral nutrient waste. In addition, a unit acclimated to 100 and 250 mg/1 of sodium pentachlorophenol was also studied. The effect of a shock loading of sodium pentachlorophenol was found to depend on the concentration of the loading and also on the group of micro-organisms which were predominating. One activated sludge system was seriously impared at a shock loading of …

Slope Stability Analysis Of A Fissured Glacial Clay, Byron G. Walker

Masters Theses

"A slope in an over-consolidated, fissured clay was analyzed by the Swedish Method of Slices.

Values of cohesion (c) and angles of friction (Ø) were determined by three different types of direct shear tests (undrained, drained and residual).

Factors of safety (functions of c and Ø) indicated that the direct shear test parameter gave a factor of safety approximately four times that represented by failure conditions in the field. Drained tests gave a factor of safety nearly 2.3 times the value represented by field conditions. The conclusion is made that these two tests are of limited value for slope stability …

A Study Of Shear Failures In Footing, Fred V. Cole

Masters Theses

"The purpose of this investigation was to conduct a model study of the basic mechanism of failure in shear of reinforced concrete footings through the use of plaster models.

Sixty-nine models were constructed and loaded to failure on a foundation of sand using various combinations of size and depth of model and column size. Load - deformation data and failure loads were recorded.

It was determined that model studies are a feasible procedure to analyse the mechanism of failure in footings. The perimeter of the loaded area was found to be the critical section in determining the ultimate shearing strength …

Analysis Charts For Single And Multi-Span Gabled Frames, John (Chung-Su) Ma

Masters Theses

"A method for analyzing single and multi-span gabled frames using analysis charts is presented. This method requires considerably fewer computations than methods previously used (such as the moment distribution and slope-deflection methods). Analysis charts are presented for single gabled frames having fixed or pinned ends at ground level, and charts are also presented which can be used to efficiently analyze multi-gabled frames.

The data for the analysis charts were obtained using matrix techniques in conjunction with the digital computer. These techniques are described"--Abstract, page ii.

A Procedure For Analysis Of Three-Segment Symmetrical Balcony Beams, Ronald A. Hansen

Masters Theses

"A procedure for analysis of three-segment symmetrical balcony beams unsymmetrically loaded was derived whereby the normally complicated energy solution is eliminated. A moment distribution technique is used in the solution of the first and second phases of the problem. Tables are given to aid in determining the proper distribution factors. Due to the complexity of the third phase, a table of solutions is given for varying values of length, geometry, etc.. An example problem is also given demonstrating the use of interpolation within the tables"--Abstract, page ii.

Numerical Solution Of Water Hammer Analysis Including Friction Losses, Lih Hsun Weng

Masters Theses

"The water hammer phenomena is a very important problem in pipe lines and gate operations. There are many analytical solutions tor water hammer problems including friction losses, but most of them use a linear approximation tor the friction effect that is different from the actual situation. Also the existing methods for solving water hammer problems involve difficult mathematical operations that are impractical and inaccurate.

In order to find a more rapid method for solving water hammer problems including friction losses and to obtain closer agreement with the actual condition, the problem is solved here using the basic partial differential equations …

A Numerical Solution For Beam-Columns On Non-Linear Foundations, Wendelin H. Mueller Iii

Masters Theses

"A program for Matlock's recursive method, a numerical method which will analyze beams and columns with linearly varying spring supports, was modified to enable the solution of such members supported by non-linear springs. This modification was accomplished by an iterative technique. The final result of this paper is a computer program which can be used to solve beams or columns with non-linear spring supports, giving as output the deflection, slope, moment, shear, net load and curvature of the structure at uniformly spaced locations"--Abstract, page ii.