Engineering Commons^™

Design And Implementation Of A Stand-Alone Tool For Metabolic Simulations, Milad Ghiasi Rad

Department of Computer Science and Engineering: Dissertations, Theses, and Student Research

In this thesis, we present the design and implementation of a stand-alone tool for metabolic simulations. This system is able to integrate custom-built SBML models along with external user’s input information and produces the estimation of any reactants participating in the chain of the reactions in the provided model, e.g., ATP, Glucose, Insulin, for the given duration using numerical analysis and simulations. This tool offers the food intake arguments in the calculations to consider the personalized metabolic characteristics in the simulations. The tool has also been generalized to take into consideration of temporal genomic information and be flexible for simulation …

Modeling And Simulation Of Microgrid, Ahmad Alzahrani, Mehdi Ferdowsi, Pourya Shamsi, Cihan H. Dagli

Electrical and Computer Engineering Faculty Research & Creative Works

Complex computer systems and electric power grids share many properties of how they behave and how they are structured. A microgrid is a smaller electric grid that contains several homes, energy storage units, and distributed generators. The main idea behind microgrids is the ability to work even if the main grid is not supplying power. That is, the energy storage unit and distributed generation will supply power in that case, and if there is excess in power production from renewable energy sources, it will go to the energy storage unit. Therefore, the electric grid becomes decentralized in terms of control …

An Optimization Model For Operating Room Scheduling To Reduce Blocking Across The Perioperative Process, Amin Abedini, Wei Li, Honghan Ye

Mechanical Engineering Faculty Publications

Operating room (OR) scheduling is important. Because of increasing demand for surgical services, hospitals must provide high quality care more efficiently with limited resources. When constructing the OR schedule, it is necessary to consider the availability of downstream resources, such as intensive care unit (ICU) and post anaesthesia care unit (PACU). The unavailability of downstream resources causes blockings between every two consecutive stages. In this paper we address the master surgical schedule (MSS) problem in order to minimize blockings between two consecutive stages. First, we present a blocking minimization (BM) model for the MSS by using integer programming, based on …

Small Uas Detect And Avoid Requirements Necessary For Limited Beyond Visual Line Of Sight (Bvlos) Operations, Mark Askelson, Henry Cathey, Ronald Marsh, Zachary P. Waller, Paul Snyder, Gary M. Ullrich, Chris Theisen, Naima Kaabouch, William Semke, Michael Mullins, Kyle Foerster, Rosa Brothman, Stephen B. Hottman, Kerry Williamson, Eric Johnson, Alexander Vanhoudt, Zachariah Larue

Aviation Faculty Publications

Potential small Unmanned Aircraft Systems (sUAS) beyond visual line of sight (BVLOS) operational scenarios/use cases and Detect And Avoid (DAA) approaches were collected through a number of industry wide data calls. Every 333 Exemption holder was solicited for this same information. Summary information from more than 5,000 exemption holders is documented, and the information received had varied level of detail but has given relevant experiential information to generalize use cases. A plan was developed and testing completed to assess Radio Line Of Sight (RLOS), a potential key limiting factors for safe BVLOS ops. Details of the equipment used, flight test …

On The Simulation And Mitigation Of Anisoplanatic Optical Turbulence For Long Range Imaging, Russell C. Hardie, Daniel A. Lemaster

Electrical and Computer Engineering Faculty Publications

We describe a numerical wave propagation method for simulating long range imaging of an extended scene under anisoplanatic conditions. Our approach computes an array of point spread functions (PSFs) for a 2D grid on the object plane. The PSFs are then used in a spatially varying weighted sum operation, with an ideal image, to produce a simulated image with realistic optical turbulence degradation. To validate the simulation we compare simulated outputs with the theoretical anisoplanatic tilt correlation and differential tilt variance. This is in addition to comparing the long- and short-exposure PSFs, and isoplanatic angle. Our validation analysis shows an …

Trim Tuning Of Sps-Series Dqw Crab Cavity Prototypes, S. Verdú-Andrés, J. Skaritka, Q. Wu, A. Ratti, S. Baurac, C. H. Boulware, T. Grimm, J. Yancey, W. Clemens, E. A. Mcewen, H. Park

Physics Faculty Publications

The final steps in the manufacturing of a superconducting RF cavity involve careful tuning before the final welds to match the target frequency as fabrication tolerances may introduce some frequency deviations. The target frequency is chosen based on analysis of the shifts induced by remaining processing steps including acid etching and cool down. The baseline fabrication of a DQW crab cavity for the High Luminosity LHC (HL-LHC) envisages a first tuning before the cavity subassemblies are welded together. To produce a very accurate final result, subassemblies are trimmed to frequency in the last machining steps, using a clamped cavity assembly …

Using The Vehicle Routing Problem To Reduce Field Completion Times With Multiple Machines, Hasan Seyyedhasani, Joseph S. Dvorak

Biosystems and Agricultural Engineering Faculty Publications

The Vehicle Routing Problem (VRP) is a powerful tool used to express many logistics problems, yet unlike other vehicle routing challenges, agricultural field work consists of machine paths that completely cover a field. In this work, the allocation and ordering of field paths among a number of available machines has been transformed into a VRP that enables optimization of completion time for the entire field. A basic heuristic algorithm (a modified form of the common Clarke-Wright algorithm) and a meta-heuristic algorithm, Tabu Search, were employed for optimization. Both techniques were evaluated through computer simulations in two fields: a hypothetical basic …

Simulation Of Anisoplanatic Imaging Through Optical Turbulence Using Numerical Wave Propagation With New Validation Analysis, Russell C. Hardie, Jonathan D. Power, Daniel A. Lemaster, Douglas R. Droege, Szymon Gladysz, Santasri Bose-Pillai

Electrical and Computer Engineering Faculty Publications

We present a numerical wave propagation method for simulating imaging of an extended scene under anisoplanatic conditions. While isoplanatic simulation is relatively common, few tools are specifically designed for simulating the imaging of extended scenes under anisoplanatic conditions. We provide a complete description of the proposed simulation tool, including the wave propagation method used. Our approach computes an array of point spread functions (PSFs) for a two-dimensional grid on the object plane. The PSFs are then used in a spatially varying weighted sum operation, with an ideal image, to produce a simulated image with realistic optical turbulence degradation. The degradation …

Editorial: Modelling And Simulation In Health Care Systems, Nagesh Shukla, Pascal Perez, Manoj K. Tiwari, Darek Ceglarek, Joana M. Dias

Faculty of Engineering and Information Sciences - Papers: Part A

Increasingly, changes in population demography, technological and medical advancements, and others, have affected the paradigm of health and social care systems worldwide. These changes have direct effect on organisation and working of health care systems whether they are hospitals, general practitioners or long-term care. An efficient and effective health care system is crucial for high quality of the life in the society. In recent times, major challenges faced by health care systems are accurate diagnosis, operational issues (such as bottlenecks, low throughput, low resource utilisation), hospital redesign, workforce planning and scheduling, streamlining of patient flow, performance management, disease monitoring, and …

Stabilization Of Track Substructure With Geoinclusions- Experimental Evidence And Dem Simulation, Ngoc Trung Ngo, Buddhima Indraratna, Cholachat Rujikiatkamjorn

Faculty of Engineering and Information Sciences - Papers: Part A

This article reviews on current knowledge of rail track geomechanics, including several important concepts and topics related to laboratory testing and computational modelling, to study the shear stress-strain and deformation of ballast improved by geosynthetics and recycled rubber mats. The effect that impact loads have on ballast degradation and its mitigation due to resilient synthetic mats (i.e. rubber mats) between the ballast and the subballast is investigated using large-scale impact-testing apparatus. Computational modelling with finite element and discrete element methods are increasingly being used to model ballasted tracks reinforced with geosynthetics to capture the continuum media of formation soils and …

Railnet: A Simulation Model For Operational Planning Of Rail Freight, Guillaume Michal, Nam N. Huynh, Nagesh Shukla, Albert Munoz, Johan Barthelemy

SMART Infrastructure Facility - Papers

In many rail networks, infrastructure constraints force the shared usage of lines between passenger and freight movements. Scheduling additional freight movements around existing passenger services and peak traffic based curfews presents significant challenges to commodity industries eager to increase export volumes. This paper addresses the problem of inserting additional freight movements in a constrained railway network. To this end, a railway operations planning model was developed to simulate and insert feasible rail movements in a non-periodic timetable. The simulation modelling platform developed in this paper is called RailNet, which simulates the existing railway network constraints and is capable of adding …

Ventilative Cooling Through Automated Window Opening Control Systems To Address Thermal Discomfort Risk During The Summer Period: Framework, Simulation And Parametric Analysis, Theofanis Psomas, Massimo Fiorentini, Georgios Kokogiannakis, Per K. Heiselberg

Faculty of Engineering and Information Sciences - Papers: Part B

Automated window opening control systems with integrated ventilative cooling strategies may significantly diminish the thermal discomfort and overheating risk of dwellings during cooling periods in temperate climates. One of the challenges with demonstrating the benefits of the systems is the lack of building performance simulation (BPS) tools which may represent precisely how actual algorithms are applied.

The study supported herein aims to present a framework of how to simulate an advanced ventilative cooling algorithm of a window system on coupled BPS environments (ESP-r and BCVTB tools). Parametric analysis has been conducted to verify specific operational functions of the system. The …

Performance Simulation Of A Ground Source Heat Pump System Integrated With Solar Photovoltaic Thermal Collectors For Residential Application, Lei Xia, Zhenjun Ma, Georgios Kokogiannakis

Faculty of Engineering and Information Sciences - Papers: Part B

This paper presents the simulation and performance evaluation of a ground source heat pump (GSHP) system integrated with water-based solar photovoltaic thermal (PVT) collectors for residential buildings. A dynamic simulation system is developed using TRNSYS and used to facilitate the performance evaluation of the system. A 20-year life-time performance simulation is performed under three operation scenarios with different sizes of the PVT collectors. The results showed that the performance of the system is highly dependent on the size of the PVT collectors. Furthermore, an economic analysis is carried out to determine the optimum size of the PVT collectors for the …

Gvm Based Intuitive Simulation Web Application For Collision Detection, Binbin Yong, Jun Shen, Zebang Shen, Huaming Chen, Xin Wang, Qingguo Zhou

Faculty of Engineering and Information Sciences - Papers: Part B

Computer simulation, which has been proved to be an effective approach to problem solving, is nowadays widely used in modern science. However, it requires a lot of computing resources, which are difficult for general users to acquire. In this paper, we design a Web based system to implement on-line simulation system for ordinary users. As a useful example, the simulation of one type of collision detection model is presented in this paper. Moreover, the software application of simulation is offered as a service on Web. Meanwhile, the incorporation of general vector machine (GVM, a type of neural network) to intelligently …

Investigating Students’ Perception Using Construction Management Simulations, Saeed Rokooei, James D. Goedert, Asregedew Woldesenbet

Department of Construction Engineering and Management: Faculty Publications

Today, construction programs are incorporating a wide variety of active learning methods in their curricula to improve student learning outcomes and induce a more knowledge retention rate. Simulations and educational games are one of the fast growing and effective active learning methods that have been implemented in many programs. However, there are few instances of such learning methods applied in construction programs and a limited number of research projects have been conducted to investigate short-term and long-term outcomes of these methods and applications. This paper presents construction students’ perceptions of tested simulations with regards to the features, knowledge gained, level …

Introduction To Water Resources Systems - University Of Colorado Boulder, Joseph Kasprzyk

All ECSTATIC Materials

This is the introductory lecture to a Water Resource Systems and Management class from Spring 2017 at the University of Colorado Boulder, by Joseph Kasprzyk. Learning goals include (i) defining integrated water resources management, (ii) identifying Colorado water management issues (ii) identifying how RiverWare simulation and optimization can be used to develop water plans (iii) use the HyMod model to perform rainfall-runoff modeling (iv) generating random parameter samples and understanding how parameter uncertainty affects model results.

Impact Of A Localized Lean Six Sigma Implementation On Overall Patient Safety And Process Efficiency, Luvianca Gil, Pilar Pazos, Mamadou Seck, Rolando Delaguila

Engineering Management & Systems Engineering Faculty Publications

Continuous quality improvement tools have caught the attention of the Health Care Industry as a solution to process efficiency, patient safety and cost reduction. This research explores the impact of a Lean Six Sigma (LSS) process improvement initiative in overall process efficiency and patient safety in two Labor and Delivery (L+D) units of two large hospital providers. This study focuses on the application of modeling and simulation methodology to investigate the influence of a localized process improvement intervention on the overall L+D unit output, by considering patient flow, system capacity and unit performance. The simulation models capacity profiles and patient …

An Adaptive Agent-Based Approach To Traffic Simulation, Johan Barthelemy, Timoteo Carletti

SMART Infrastructure Facility - Papers

The aim of this work is to present the initial exploration of a behavioural Dynamic Traffic Assignment model, particularly suitable to be used and implemented in agent-based micro-simulations. The proposal relies on the assumption that travellers take routing policies rather than paths, leading us to introduce the possibility for each simulated agent to apply, in real time, a strategy allowing him to possibly re-route his path depending on the perceived local traffic conditions, jam and/or time spent. The re-routing process allows the agents to directly react to any change in the road network. For the sake of simplicity, the agents' …

Simulation Of The Melting Process Of Ice Slurry For Energy Storage Using A Two-Fluid Lattice Boltzmann Method, Qi Lin, Shugang Wang, Zhenjun Ma, Jihong Wang, Tengfei Zhang

Faculty of Engineering and Information Sciences - Papers: Part B

Ice slurry can be used as the thermal storage media in latent cool storage systems for both residential and commercial buildings. This paper presents the investigation of the phase change characteristics of the ice slurry using a two-fluid Lattice Boltzmann Method (TFLBM). The melting and migration processes of the ice slurry are simulated by improving the equilibrium distribution function and matching the relevant parameters such as the kinetic viscosity of ice particle cluster and cross-collision coefficient. The sensitivity analysis of the ice slurry viscosity and cross-collision coefficient are achieved through six numerical experiments, and the ice melting in the internal-melt …