Engineering Commons^™

Economic Feasibility Of Campus-Wide Photovoltaic Systems In New England, Jongsung Lee, Byungik Chang, Can B. Aktas, Ravi Gorthala

Civil Engineering Faculty Publications

Compared to the national average residential retail electricity price, Connecticut (CT) had the 4th 26 highest electricity price in the country with 19.23 cents/kWh in September 2015, nearly 50% 27 higher than the national average for price of electricity. This study aims to assess the economic 28 feasibility of the solar PV systems at the campus under realistic constraints, by analyzing actual 29 data from the solar array on campus. The project focused on the economic feasibility of solar PV 30 systems on campus with physical, spatial, and practical constraints that result in a project to 31 deviate from theoretical …

Preface-Jes Focus Issue On Electrolysis For Increased Renewable Energy Penetration, B. Pivovar, M. Carmo, K. Ayers, X. Zhang, J. O'Brien

Mechanical & Aerospace Engineering Faculty Publications

(First paragraph) Today represents a particularly exciting time, as our planet’s energy system is undergoing major changes due to dramatically decreasing renewable energy prices and increasing societal concerns over greenhouse gas emissions, criteria pollutants (arsenic, mercury, NOx, particulate matter), and climate change. These factors are pushing society toward deep decarbonization of our energy system, perhaps the most challenging issue facing the planet today. Unfortunately, wind and solar energy, while both promising generation sources, come with intermittency challenges and have limitations in their abilities to impact industrial and transportation sector demands where fossil fuel energy carriers based on chemical bonds have …

Environmental Protection Through Nuclear Energy, Florio Ion T. Petrescu, Antonio Apicella, Relly Victoria V. Petrescu, Samuel Peter Kozaitis, Ronald B. Bucinell, Raffaella Aversa, Taher M. Abu-Lebdeh

Electrical Engineering and Computer Science Faculty Publications

Environmental protection through implementation of green energies is progressively becoming a daily reality. Numerous sources of green energy were introduced in recent years. Although this process initially started with difficulties, it finally resulted in an acceleration and implementation of new green energy technologies. Nonetheless, new major obstacles are emerging. The most worldwide difficult obstacle encountered, especially for wind and photovoltaic electric power plants, is the not regular and predictable green energy production. This study proposes solutions designed to solve this unpleasant aspect of irregular production of green energy. The basic idea refers to the construction of specially designed nuclear power …

Life Cycle Assessment Of Low Cost Retrofit Options Of Educational Building Considering Renewable And Non‐Renewable Energies, Akram Avami, Atiyeh Soleimani Javid

Life Cycle Assessment and Other Assessment Tools for Waste Management and Resource Optimization

Commercial and building sectors account for 34% of total energy consumption in Iran. Increasing demand of the level of comfort along with population growth necessitate much more attention about energy requirements in the country. Such phenomenons have already raised concerns about the security of energy supply and heavy environmental impacts. These concerns can significantly be reduced by implementing retrofit options in existing buildings.

The Department of Energy Engineering of Sharif University of Technology is selected as the case study with 181KWh/m2 annual heating and cooling demand, 29 KWh/m2 annual lightening and 15 KWh/m2 electrical appliances energy demand. Environmental concerns are …

Impact Of Clustering Microgrids On Their Stability And Resilience During Blackouts, Mahmoud S. Saleh, Ammar Althaibani, Yusef Esa, Yassine Mhandi, Ahmed Mohamed

Publications and Research

In this paper, the impact of clustering multiple microgrids during blackouts, on their stability and supply availability, will be investigated. Microgrids have the capability of satisfying their emergency loads during blackouts. However, distributed energy resources (DERs)-dominated microgrids are affected by the uncertainty of their input energy supply, e.g. impact of solar irradiance on photovoltaic (PV) output. Moreover, an individual islanded microgrid is prone to instability issues due to large sudden load/generation changes. In order to increase the supply security, and enhance system stability, we propose to use the existing distribution grid infrastructure, if applicable, during blackouts to form microgrid clusters. …

Fulfilling The Promise Of The Paris Agreement: The Role Of Efficiency And Renewable Energy, Chuck Kutscher

CO2 Summit II: Technologies and Opportunities

Renewable energy, energy policy, energy efficiency, buildings

The rapid large-scale deployment of efficiency and renewable energy technologies is crucial to meeting the goals of the COP21 agreement. Key to achieving this is transitioning to zero-carbon cities comprised of highly efficient buildings powered by renewable electricity. This presentation will survey the current efficiency and renewable energy research underway at the National Renewable Energy Laboratory with special attention paid to zero-carbon buildings and the challenges of developing a renewable energy electric grid.

Bioenergy From Wastewater-Based Biomass, Ronald C. Sims, Sean K. Bedingfield, Reese Thompson, Judith L. Sims

Biological Engineering Faculty Publications

The U.S. Department of Energy (DOE) has stated that biomass is the only renewable resource that can supplant petroleum-based liquid transportation fuels in the near term. Wastewater is beginning to be viewed as a potential resource that can be exploited for biomass production and conversion to bioenergy. We suggest that using wastewater from municipalities and industries as a resource for cultivating biomass and combining wastewater treatment with the production of biomass for bioenergy would provide benefits to both industries. Two waste-based biomass production systems that currently have large nationwide infrastructures include: (1) wastewater treatment systems that can be used to …

High-Efficiency Solar-Powered 3-D Printers For Sustainable Development, Jephias Gwamuri, Dhiogo Franco, Khalid Khan, Lucia Gauchia, Joshua M. Pearce

Michigan Tech Publications

The release of the open source 3-D printer known as the RepRap (a self-Replicating Rapid prototyper) resulted in the potential for distributed manufacturing of products for significantly lower costs than conventional manufacturing. This development, coupled with open source-appropriate technology (OSAT), has enabled the opportunity for 3-D printers to be used for sustainable development. In this context, OSAT provides the opportunity to modify and improve the physical designs of their printers and desired digitally-shared objects. However, these 3-D printers require electricity while more than a billion people still lack electricity. To enable the utilization of RepRaps in off-grid communities, solar photovoltaic …