Open Access. Powered by Scholars. Published by Universities.®
- Institution
Articles 1 - 13 of 13
Full-Text Articles in Engineering
On The Use Of Machine Learning And Data-Transformation Methods To Predict Hydration Kinetics And Strength Of Alkali-Activated Mine Tailings-Based Binders, Sahil Surehali, Taihao Han, Jie Huang, Aditya Kumar, Narayanan Neithalath
On The Use Of Machine Learning And Data-Transformation Methods To Predict Hydration Kinetics And Strength Of Alkali-Activated Mine Tailings-Based Binders, Sahil Surehali, Taihao Han, Jie Huang, Aditya Kumar, Narayanan Neithalath
Electrical and Computer Engineering Faculty Research & Creative Works
The escalating production of mine tailings (MT), a byproduct of the mining industry, constitutes significant environmental and health hazards, thereby requiring a cost-effective and sustainable solution for its disposal or reuse. This study proposes the use of MT as the primary ingredient (≥70%mass) in binders for construction applications, thereby ensuring their efficient upcycling as well as drastic reduction of environmental impacts associated with the use of ordinary Portland cement (OPC). The early-age hydration kinetics and compressive strength of MT-based binders are evaluated with an emphasis on elucidating the influence of alkali activation parameters and the amount of slag or cement …
Synthesis And Characterization Of Cellulose Microfibril-Reinforced Polyvinyl Alcohol Biodegradable Composites, Fatemeh Mahdiyeh-Boroujeni, Gabriella Fioravanti, Ronald Kander
Synthesis And Characterization Of Cellulose Microfibril-Reinforced Polyvinyl Alcohol Biodegradable Composites, Fatemeh Mahdiyeh-Boroujeni, Gabriella Fioravanti, Ronald Kander
School of Design and Engineering Papers
The pursuit of an environmentally sustainable manufacturing process requires the substitution of less damaging and recyclable solutions for harmful reagents. This study aims to assess the effectiveness of using cellulose microfibrils synthesized via different hydrolysis reactions as reinforcing agents in polyvinyl alcohol (PVA) at varying concentrations. The investigation explores the morphology, thermal properties, and chemical behavior of the cellulose particles. The cellulose microfibrils (CMFs) produced using citric acid exhibited the highest yield and aspect ratio. Notably, particles from organic acids demonstrated greater thermal stability, with oxalic acid-derived particles displaying the maximum thermal degradation temperature. Subsequently, cast films of PVA reinforced …
Biopolymer-Based Sustainable Food Packaging Materials: Challenges, Solutions, And Applications, Kalpani Y. Perera, Amit Jaiswal, Swarna Jaiswal
Biopolymer-Based Sustainable Food Packaging Materials: Challenges, Solutions, And Applications, Kalpani Y. Perera, Amit Jaiswal, Swarna Jaiswal
Articles
Biopolymer-based packaging materials have become of greater interest to the world due to their biodegradability, renewability, and biocompatibility. In recent years, numerous biopolymers—such as starch, chitosan, carrageenan, polylactic acid, etc.—have been investigated for their potential application in food packaging. Reinforcement agents such as nanofillers and active agents improve the properties of the biopolymers, making them suitable for active and intelligent packaging. Some of the packaging materials, e.g., cellulose, starch, polylactic acid, and polybutylene adipate terephthalate, are currently used in the packaging industry. The trend of using biopolymers in the packaging industry has increased immensely; therefore, many legislations have been approved …
Investigation Of Fiber Orientation And Mechanical Properties Of Pyrolysis Recycled Carbon-Fiber Reinforced Thermoset Composite, Reva N. Simmons, Harry Lee, Garam Kim
Investigation Of Fiber Orientation And Mechanical Properties Of Pyrolysis Recycled Carbon-Fiber Reinforced Thermoset Composite, Reva N. Simmons, Harry Lee, Garam Kim
Discovery Undergraduate Interdisciplinary Research Internship
With increasing demand of carbon fiber reinforced fiber thermoset composites, establishing a sustainable cycle for these materials becomes crucial. Pyrolysis is a process of reclaiming carbon fiber from thermoset composites by thermally degrading the polymer at high temperatures allowing the fibers to be extracted. Carbon fiber reclaimed through current pyrolysis processes for thermoset composites typically loses its original shape and orientation, making it difficult to reorganize the fibers. This study investigated the feasibility of maintaining the fiber orientations for continuous fiber reinforced thermoset composite during pyrolysis by stitching the carbon fiber layup to a conformable copper mesh during the manufacturing …
In Vivo Biosynthesis Of Inorganic Nanomaterials Using Eukaryotes - A Review, Ashiqur Rahman, Julia Lin, Francisco E. Jaramillo, Dennis A. Bazylinski, Clayton Jeffryes, Si Amar Dahoumane
In Vivo Biosynthesis Of Inorganic Nanomaterials Using Eukaryotes - A Review, Ashiqur Rahman, Julia Lin, Francisco E. Jaramillo, Dennis A. Bazylinski, Clayton Jeffryes, Si Amar Dahoumane
Life Sciences Faculty Research
Bionanotechnology, the use of biological resources to produce novel, valuable nanomaterials, has witnessed tremendous developments over the past two decades. This eco-friendly and sustainable approach enables the synthesis of numerous, diverse types of useful nanomaterials for many medical, commercial, and scientific applications. Countless reviews describing the biosynthesis of nanomaterials have been published. However, to the best of our knowledge, no review has been exclusively focused on the in vivo biosynthesis of inorganic nanomaterials. Therefore, the present review is dedicated to filling this gap by describing the many different facets of the in vivo biosynthesis of nanoparticles (NPs) using living eukaryotic …
Development Of Geopolymer-Based Cement And Soil Stabilizers For Transportation Infrastructure, Miladin Radovic, Anand Puppala
Development Of Geopolymer-Based Cement And Soil Stabilizers For Transportation Infrastructure, Miladin Radovic, Anand Puppala
Publications
Geopolymer Cement (GPC) has drawn much attention in the recent years as an alternative to Ordinary Portland Cement (OPC) for soil stabilization, pavements, bridges and other transportation structures due to their good mechanical properties in comparison to OPC. In addition, GPC can be processed at room temperatures from aqueous solutions of waste materials (e.g. fly ash) or abundant natural sources (e.g. clay), thereby significantly reducing CO2 production associated with processing of OPC. As such, GPC proves to be a more sustainable and environmentally friendly alternative than OPC. This research explores methods to develop GPC with desired properties and evaluate their …
Toward Non-Corrosion And Highly Sustainable Structural Members By Using Ultra-High-Performance Materials For Transportation Infrastructure, Shih-Ho Chao, Ashish Karmacharya
Toward Non-Corrosion And Highly Sustainable Structural Members By Using Ultra-High-Performance Materials For Transportation Infrastructure, Shih-Ho Chao, Ashish Karmacharya
Publications
This research focused on investigating a highly sustainable and efficient reinforced concrete structural member for future infrastructure by utilizing emerging high-performance materials. These materials include ultra-high-performance fiber-reinforced concrete (UHP-FRC) and corrosion-resistant high-strength fiber-reinforced polymer (FRP) bars. Four reduced scale UHP-FRC specimens were tested under large displacement reversals to prove the proposed new ductile-concrete strong-reinforcement (DCSR) design concept by fully utilizing these ultra-high-performance materials. Micro steel fibers were incorporated into three specimens and ultra-high molecular weight polyethylene fibers were blended into the fourth specimen. One specimen with ASTM A1035 MMFX high-strength steel rebars, one with high-strength glass fiber reinforced polymer (GFRP) …
Systems Analysis For Pet And Olefin Polymers In A Circular Economy, David R. Shonnard, Emily Tipaldo, Vicki Thompson, Joshua M. Pearce, Gerard T. Caneba, Robert Handler
Systems Analysis For Pet And Olefin Polymers In A Circular Economy, David R. Shonnard, Emily Tipaldo, Vicki Thompson, Joshua M. Pearce, Gerard T. Caneba, Robert Handler
Michigan Tech Publications
Polyethylene terephthalate (PET #1) and polyolefin plastics such polyethylene (HDPE #2, LDPE #4) and polypropylene (PP #5) are major products from the chemical industry, and they comprise a significant fraction of municipal solid waste that ends up in landfills or as litter and marine debris. The reuse of these polymeric materials can be optimized through systems analysis with a view on materials flow analysis, techno-economics, environmental life cycle assessment, and consequential societal impacts. This contribution will present the overall research approach for this exploratory project within the DOE- and industry-funded REMADE Institute and end with a proposed systems analysis framework.
Process Sustainability Evaluation For Manufacturing Of A Component With The 6r Application, Ana E. Bonilla Hernández, Tao Lu, Tomas Beno, Claes Fredriksson, Ibrahim S. Jawahir
Process Sustainability Evaluation For Manufacturing Of A Component With The 6r Application, Ana E. Bonilla Hernández, Tao Lu, Tomas Beno, Claes Fredriksson, Ibrahim S. Jawahir
Institute for Sustainable Manufacturing Faculty Publications
Sustainability in manufacturing can be evaluated at product, process and system levels. The 6R methodology for sustainability enhancement in manufacturing processes includes: reduced use of materials, energy, water and other resources; reusing of products/components; recovery and recycling of materials/components; remanufacturing of products; and redesigning of products to utilize recovered materials/resources. Although manufacturing processes can be evaluated by their productivity, quality and cost, process sustainability assessment makes it a complete evaluation. This paper presents a 6R-based evaluation method for sustainable manufacturing in terms of specific metrics within six major metrics clusters: environmental impact, energy consumption, waste management, cost, resource utilization and …
Designing And Redesigning Products, Processes, And Systems For A Helical Economy, Ryan Bradley, Ibrahim S. Jawahir
Designing And Redesigning Products, Processes, And Systems For A Helical Economy, Ryan Bradley, Ibrahim S. Jawahir
Institute for Sustainable Manufacturing Faculty Publications
The Circular Economy (CE) concept has promised to unlock trillions of dollars in business value while driving a significant reduction in the world’s resource consumption and anthropogenic emissions. However, CE mainly lives in ambiguity in the manufacturing domain because CE does not address the changes needed across all of the fundamental elements of manufacturing: products, processes, and systems. Conceptually, CE is grounded in the concept of closed-loop material flows that fit within ecological limits. This grounding translates into a steady state economy, a result that is not an option for the significant portion of the world living in poverty. Therefore, …
Realizing Urban Water Pollution Impact In Melbourne, Australia Through Painting, Gregory Suplinskas
Realizing Urban Water Pollution Impact In Melbourne, Australia Through Painting, Gregory Suplinskas
Independent Study Project (ISP) Collection
Throughout the month of November 2016, I undertook a creative environmental art project in Melbourne, Australia. I chose to create a water-soluble oil painting (dimensions 3 ft. x 4 ft.) that represents water pollution problems in the city of Melbourne, particularly in Port Phillip Bay. These problems include toxic stormwater runoff, plastics pollution and plastic nurdles, as well as nutrient buildup and algal overgrowth. The painting includes messages regarding sustainability; sustainable action limits the use of our natural resources so that humans can preserve the environment for future generations rather than degrade it. In the painting, I combine conceptual and …
Nanohub.Org: A Gateway To Undergraduate Simulation-Based Research In Materials Science And Related Fields, Tanya A. Faltens, Peter A. Bermel, Amanda Buckles, K Anna Douglas, Alejandro H. Strachan, Lynn K. Zentner, Gerhard Klimeck
Nanohub.Org: A Gateway To Undergraduate Simulation-Based Research In Materials Science And Related Fields, Tanya A. Faltens, Peter A. Bermel, Amanda Buckles, K Anna Douglas, Alejandro H. Strachan, Lynn K. Zentner, Gerhard Klimeck
Birck and NCN Publications
Our future engineers and scientists will likely be required to use advanced simulations to solve many of tomorrow's challenges in nanotechnology. To prepare students to meet this need, the Network for Computational Nanotechnology (NCN) provides simulation-focused research experiences for undergraduates at an early point in their educational path, to increase the likelihood that they will ultimately complete a doctoral program. The NCN summer research program currently serves over 20 undergraduate students per year who are recruited nationwide, and selected by NCN and the faculty for aptitude in their chosen field within STEM, as well as complementary skills such as coding …
Integrating Project-Based Learning Throughout The Undergraduate Engineering Curriculum, Richard N. Savage, Katherine C. Chen, Linda Vanasupa
Integrating Project-Based Learning Throughout The Undergraduate Engineering Curriculum, Richard N. Savage, Katherine C. Chen, Linda Vanasupa
Materials Engineering
Equipping engineering students with the skills and knowledge required to be successful global engineers in the 21st century is one of the primary objectives of undergraduate educators. Enabling students to practice self-directed learning, to find solutions to design problems that are sustainable and to recognize that they are part of a global community are just of few of our educational goals. Self-directed learning can define an individual’s ability to practice life-long learning. It places the responsibility on the individual to initiate and direct the learning process and can enable an individual to adapt to change. Project-based learning provides the contextual …