Open Access. Powered by Scholars. Published by Universities.®
- Discipline
- Institution
- Publication
- File Type
Articles 1 - 11 of 11
Full-Text Articles in Engineering
Minimizing Hidden-Node Network Interference By Optimizing Siso And Mimo Spectral Efficiency, Daniel Bliss, Siddhartan Govindasamy
Minimizing Hidden-Node Network Interference By Optimizing Siso And Mimo Spectral Efficiency, Daniel Bliss, Siddhartan Govindasamy
Siddhartan Govindasamy
In this paper, the optimal spectral efficiency (data rate divided by the message bandwidth) that minimizes the probability of causing disruptive interference for ad hoc wireless networks or cognitive radios is investigated. Two basic problem constraints are considered: a given message size, or fixed data rate. Implicitly, the trade being optimized is between longer transmit duration and wider bandwidth versus higher transmit power. Both single-input single-output (SISO) and multiple-input multiple-output (MIMO) links are considered. Here, a link optimizes its spectral efficiency to be a “good neighbor.” The probability of interference is characterized by the probability that the signal power received …
Blind Source Separation Based On Time-Domain Optimization Of A Frequency-Domain Independence Criterion, Tiemin Mei, Jiangtao Xi, Fuliang Yin, A. Mertins, Jose F. Chicharo
Blind Source Separation Based On Time-Domain Optimization Of A Frequency-Domain Independence Criterion, Tiemin Mei, Jiangtao Xi, Fuliang Yin, A. Mertins, Jose F. Chicharo
Professor Joe F. Chicharo
A new technique for the blind separation of convolutive mixtures is proposed in this paper. Inspired by the works of Amari, Sabala , and Rahbar, we firstly start from the application of Kullback-Leibler divergence in frequency domain, and then we integrate Kullback-Leibler divergence over the whole frequency range of interest to yield a new objective function which turns out to be time-domain variable dependent. In other words, the objective function is derived in frequency domain which can be optimized with respect to time domain variables. The proposed technique has the advantages of frequency domain approaches and is suitable for very …
Analysis Of Jet Characteristics And Structural Optimization Of A Liquamatic Fire Water Monitor With Self-Swinging Mechanism, Guoliang Hu, Ming Long, Juxing Liang, Weihua Li
Analysis Of Jet Characteristics And Structural Optimization Of A Liquamatic Fire Water Monitor With Self-Swinging Mechanism, Guoliang Hu, Ming Long, Juxing Liang, Weihua Li
Professor Weihua Li
This paper presents analysis and optimization of a liquamatic fire water monitor with a novel self-swinging mechanism. The design of the self-swinging mechanism has adopted a four-bar linkage driven by an impeller. The Fluent software was used to simulate the internal flow performance of the fire water monitor. In particular, the effects of the cross-sectional shape, diameters of the monitor body, inlet water pressure, and drive set of the self-swinging mechanism on the jet characteristics were analyzed. These analyses have led to optimal structural parameters of the flow channel. A prototype of the fire ware monitor was manufactured, and the …
Two-Step Optimal Thermal Generation Scheduling, B Fardanesh, F. Eugenio Villaseca
Two-Step Optimal Thermal Generation Scheduling, B Fardanesh, F. Eugenio Villaseca
F. Eugenio Villaseca
A new approach to the solution of the optimal thermal generation scheduling problem is presented. The problem is solved in two steps. As a first step, the optimal production schedule for the next day is obtained based on a daily load forecast, reserve capacity requirements, and present status of generating units. The second-step algorithm uses the results of the first step and adjusts the previous schedule to meet new constraints developed during the course of the day. Variable truncation dynamic programming is proposed as a new method to reduce computation effort. To eliminate the need for solving the entire problem …
Joint Metering And Conflict Resolution In Air Traffic Control, Jerome Le Ny, George J. Pappas
Joint Metering And Conflict Resolution In Air Traffic Control, Jerome Le Ny, George J. Pappas
George J. Pappas
This paper describes a novel optimization-based approach to conflict resolution in air traffic control, based on geometric programming. The main advantage of the approach is that Geometric Programs (GPs) can also capture various metering directives issued by the traffic flow management level, in contrast to most recent methods focusing purely on aircraft separation issues. GPs can also account for some of the nonlinearities present in the formulations of conflict resolution problems, while incurring only a small penalty in computation time with respect to the fastest linear programming based approaches. Additional integer variables can be introduced to improve the quality of …
Joint Metering And Conflict Resolution In Air Traffic Control, Jerome Le Ny, George J. Pappas
Joint Metering And Conflict Resolution In Air Traffic Control, Jerome Le Ny, George J. Pappas
George J. Pappas
This paper describes a novel optimization-based approach to conflict resolution in air traffic control, based on geometric programming. The main advantage of the approach is that Geometric Programs (GPs) can also capture various metering directives issued by the traffic flow management level, in contrast to most recent methods focusing purely on aircraft separation issues. GPs can also account for some of the nonlinearities present in the formulations of conflict resolution problems, while incurring only a small penalty in computation time with respect to the fastest linear programming based approaches. Additional integer variables can be introduced to improve the quality of …
Joint Metering And Conflict Resolution In Air Traffic Control, Jerome Le Ny, George J. Pappas
Joint Metering And Conflict Resolution In Air Traffic Control, Jerome Le Ny, George J. Pappas
George J. Pappas
This paper describes a novel optimization-based approach to conflict resolution in air traffic control, based on geometric programming. The main advantage of the approach is that Geometric Programs (GPs) can also capture various metering directives issued by the traffic flow management level, in contrast to most recent methods focusing purely on aircraft separation issues. GPs can also account for some of the nonlinearities present in the formulations of conflict resolution problems, while incurring only a small penalty in computation time with respect to the fastest linear programming based approaches. Additional integer variables can be introduced to improve the quality of …
Multi-Channel Peer-To-Peer Streaming Systems As Resource Allocation Problems, Miao Wang
Multi-Channel Peer-To-Peer Streaming Systems As Resource Allocation Problems, Miao Wang
Miao Wang
In the past few years, the Internet has witnessed the success of Peer-to-Peer (P2P) streaming technology, which has attracted millions of users. More recently, commercial P2P streaming systems have begun to support multiple channels and a user in such systems is allowed to watch more than one channel at a time. We refer to such systems as multi-channel P2P streaming systems. In this dissertation, we focus on designing multi-channel P2P streaming systems with the goal of providing optimal streaming quality for all channels, termed as system-wide optimal streaming quality. Specifically, we design the systems from the perspective of how to …
Reactive Extraction Of Solid Coconut Waste To Produce Biodiesel, Abdul Aziz Abdul Raman
Reactive Extraction Of Solid Coconut Waste To Produce Biodiesel, Abdul Aziz Abdul Raman
Abdul Aziz Abdul Raman
Biodiesel is an alternative diesel fuel produced using transesterification method where edible or non edible oil and alcohol reacts in the presence of catalyst. Biodiesel is expensive than fossil fuels because of higher raw material and production costs. Solid coconut waste is an alternative raw material from waste and suitable for biodiesel production to lower the production cost. Solid coconut waste is produced after coconut milk extraction and may still contain 17–24 wt% extractable oil content. This study introduces reactive extraction of solid coconut waste for biodiesel production. Effects of catalyst amount, KOH (0.8–2.0%), temperature (55–65 °C) and mixing intensity …
Elucidation Of The Effect Of Ionic Liquid Pretreatment On Rice Husk Via Structural Analyses, Teck Nam Ang Dr., Gek Cheng Ngoh Dr, Adeline Seak May Chua Dr, Min Gyu Lee Prof
Elucidation Of The Effect Of Ionic Liquid Pretreatment On Rice Husk Via Structural Analyses, Teck Nam Ang Dr., Gek Cheng Ngoh Dr, Adeline Seak May Chua Dr, Min Gyu Lee Prof
Teck Nam Ang Dr.
Background: In the present study, three ionic liquids, namely 1-butyl-3-methylimidazolium chloride ([BMIM]Cl), 1-ethyl-3-methylimidazolium acetate ([EMIM]OAc), and 1-ethyl-3-methylimidazolium diethyl phosphate ([EMIM]DEP), were used to partially dissolve rice husk, after which the cellulose were regenerated by the addition of water. The aim of the investigation is to examine the implications of the ionic liquid pretreatments on rice husk composition and structure. Results: From the attenuated total reflectance Fourier transform-infrared (ATR FT-IR) spectroscopy, X-ray diffraction (XRD) and scanning electron microscopy (SEM) results, the regenerated cellulose were more amorphous, less crystalline, and possessed higher structural disruption compared with untreated rice husk. The major component …
Dna Sequence Design For Dna Computation Based On Binary Particle Swarm Optimization, Norrima Mokhtar
Dna Sequence Design For Dna Computation Based On Binary Particle Swarm Optimization, Norrima Mokhtar
Mokhtar Norrima
Deoxyribonucleic Acid (DNA) has certain unique properties such as self-assembly and self-complementary in hybridization, which are important in many DNA-based technologies. DNA computing, for example, uses these properties to realize a computation in vitro, which consists of several chemical reactions. Other DNA-based technologies such as DNA-based nanotechnology and polymerase chain reaction also depend on hybridization to assemble nanostructure and to amplify DNA templates, respectively. Hybridization of DNA can be controlled by properly designing DNA sequences. In this paper, sequences are designed such that each sequence uniquely hybridizes to its complementary sequence, but not to any other sequences. Objective functions involved …