Engineering Commons^™

On The Design Of Low-Complexity High-Speed Arithmetic Circuits In Quantum-Dot Cellular Automata Nanotechnology, Amjad Almatrood

Wayne State University Dissertations

For the last four decades, the implementation of very large-scale integrated systems has largely based on complementary metal-oxide semiconductor (CMOS) technology. However, this technology has reached its physical limitations. Emerging nanoscale technologies such as quantum-dot cellular automata (QCA), single electron tunneling (SET), and tunneling phase logic (TPL) are major candidate for possible replacements of CMOS. These nanotechnologies use majority and/or minority logic and inverters as circuit primitives. In this dissertation, a comprehensive methodology for majority/minority logic networks synthesis is developed. This method is capable of processing any arbitrary multi-output Boolean function to nd its equivalent optimal majority logic network targeting …

Development Of A Programmed Electrospun Three Dimensional (3d) Nanofiber Collecter And It’S Application To Orthopedic Implant Coatings, Liang Chen

Wayne State University Dissertations

Orthopedic implants might not directly unite with bones especially in compromised patients even if they have been appropriately fixed. The lack of early osseointegration would lead to the failure of the orthopedic implant. A “bone-like” implant surface is urgently needed to accelerate osseointegration. Electrospun nanofiber (NF) is a promising implant coating due to its highly porous nanoscale structure. It mimics the collagen I nanofibrous network of bone tissue; meanwhile it has been widely used as a drug delivery device. However, its compact and dense structure is not ideal for cell growth. Our strategy was to develop a functional three-dimensional (3D) …

Study Of Periodical Flow Heat Transfer In An Internal Combustion Engine, Xi Luo

Wayne State University Dissertations

In-cylinder heat transfer is one of the most critical physical behaviors which has a direct influence on engine out emission and thermal efficiency for IC engine. In-cylinder wall temperature has to be precisely controlled to achieve high efficiency and low emission. However, this cannot be done without knowing gas-to-wall heat flux. This study reports on the development of a technique suitable for engine in-cylinder surface temperature measurement, as the traditional method is “hard to reach.” A laser induced phosphorescence technique was used to study in-cylinder wall temperature effects on engine out unburned hydrocarbons during the engine transitional period (warm up). …

Additive Manufacturing Of Al 4047 And Al 7050 Alloys Using Direct Laser Metal Deposition Process, Amrinder Singh

Wayne State University Dissertations

Additive manufacturing (AM) of metals is finding numerous applications in automotive and aerospace industry. In 21st century, aluminum is second to steel in automotive sector, because of its high strength to weight ratio. In current era, casted components of Al-Si alloy and high strength Al 7xxx series alloys are being used from low load to high load components. The primary study of this research was to achieve the defect free deposition of Al-Si and Al 7050 alloy. Al-Si alloys samples have been manufactured at lab scale using various additive manufacturing processes, but so far there is no literature available to …

Developing Innovation Capability In A Mass Production Organization, Mark Douglas Dolsen

Wayne State University Dissertations

ABSTRACT

DEVELOPING INNOVATION CAPABILITY IN A MASS PRODUCTION ORGANIZATION

by

MARK DOLSEN

May 2017

Advisor: Dr. Ratna Babu Chinnam

Major: Industrial Engineering

Degree: Doctor of Philosophy

Auto parts manufacturing is a key element of the North American automotive supply chain, and a significant component of the economy of Ontario, Canada. Employment in this sector declined 40% from 2003 to 2010 as the industry experienced a recession, and many firms relocated to lower wage jurisdictions as the Canadian currency strengthened against the US dollar. Experts contend that the solution for the industry lies in innovation; however, recommendations found in the current …

Chalcogenide Nanocrystal Assembly: Controlling Heterogeneity And Modulating Heterointerfaces, Jessica Davis Davis

Wayne State University Dissertations

This dissertation work is focused on developing methods to facilitate charge transport in heterostructured materials that comprise a nanoscale component. Multicomponent semiconductor materials were prepared by (1) spin coating of discrete nanomaterials onto porous silicon (pSi) or (2) self-assembly. Spin-coating of colloidal quantum dot (QD) PbS solutions was employed to create prototype PbS QD based radiation detection devices using porous silicon (pSi) as an n-type support and charge transport material. These devices were initially tested as a photodetector to ascertain the possibility of their use in high energy radiation detection. Short chain thiolate ligands (4-fluorothiophenolate) and anion passivation at the …

An Investigation Of The Mechanism Of Traumatic Brain Injury Caused By Blast In The Open Field, Ke Feng

Wayne State University Dissertations

Blast-induced traumatic brain injury (bTBI) is a signature wound of modern warfare. The current incomplete understanding of its injury mechanism impedes the development of strategies for effective protection of bTBI. Despite a considerable amount of experimental animal studies focused on the evaluation of brain neurotrauma caused by blast exposure, there is very limited knowledge on the biomechanical responses of the gyrenecephalic brain subjected to primary free-field blast waves imposed in vivo, and the correlation analysis between the biomechanical responses and its injury outcomes. Such information is crucial to the development of injury criteria of bTBI.

This study aims to evaluate …

Brain Connectivity After Concussion, Armin Iraji

Wayne State University Dissertations

Mild traumatic brain injury (mTBI) accounts for over one million emergency visits in the United States each year. While most mTBI patients have normal findings in clinical neuroimaging, alterations in brain structure and functional connectivity have frequently been reported. In this study, we investigated the large-scale brain structural and functional connectivity using diffusion MRI and resting-state fMRI data. Data from 40 mTBI patients was acquired at the acute stage (within 24 hrs after injury). 35 patients returned for data acquisition at a follow-up (4-6 weeks after injury). Data was also collected from a cohort of 58 healthy subjects, 36 of …

Mri Methods For Imaging The Feto-Placental Vasculature And Blood, Uday Krishnamurthy

Wayne State University Dissertations

Fetal magnetic resonance imaging (MRI) in recent times has become a well-established adjunct to ultrasound (US) in routine clinical prenatal care and diagnostics. The majority of fetal MRI is restricted to T2-weighted scans, where the diagnosis is based on the appearance of normal and abnormal tissue. Although there have been many advancements in MRI and a plethora of sequences, that probe different anatomical and different physiological process, the adaptation of these in fetal imaging has been rather slow. Many of these can extract quantitative parameters that can throw light on the underlying tissue’s normal/patho-physiology. But the use of such quantitative …

Actuation Of Droplets Using Transparent Graphene Electrodes For Tunable Lenses And Biomedical Applications, Ali Shahini

Wayne State University Dissertations

Variable focal length liquid microlenses are the next candidate for a wide variety of applications. Driving mechanism of the liquid lenses can be categorized into mechanical and electrical actuation. Among different actuation mechanisms, EWOD is the most common tool for actuation of the liquid lenses. In this dissertation, we have demonstrated versatile and low-cost miniature liquid lenses with graphene as electrodes. Tunable focal length is achieved by changing both curvature of the droplet using electrowetting on dielectric (EWOD) and applied pressure. Ionic liquid and KCl solution are utilized as lens liquid on the top of a flexible Teflon-coated PDMS/parylene membrane. …

Video Stream Adaptation In Computer Vision Systems, Yousef Sharrab Sharrab

Wayne State University Dissertations

Computer Vision (CV) has been deployed recently in a wide range of applications, including surveillance and automotive industries. According to a recent report, the market for CV technologies will grow to $33.3 billion by 2019. Surveillance and automotive industries share over 20% of this market. This dissertation considers the design of real-time CV systems with live video streaming, especially those over wireless and mobile networks. Such systems include video cameras/sensors and monitoring stations. The cameras should adapt their captured videos based on the events and/or available resources and time requirement. The monitoring station receives video streams from all cameras and …

Human-Machine Interface Development For Modifying Driver Lane Change Behavior In Manual, Automated, And Shared Control Automated Driving, Walter Joseph Talamonti

Wayne State University Dissertations

Rear-end crashes are common on U.S. roads. Driver assistance and automated driving technologies can reduce rear-end crashes (among other crash types as well). Braking is assumed for forward collision warning (FCW) and automatic emergency braking (AEB) systems. Braking is also used for adaptive cruise control (ACC) and in automated driving systems more generally. However, steering may be advised in an emergency if the adjacent lane is clear and braking is unlikely to avoid a collision. Steering around an obstacle when feasible also eliminates the risk of becoming the new forward collision hazard. Driver assist technology like emergency steer assist (ESA) …

Cascaded Converters For Integration And Management Of Grid Level Energy Storage Systems, Zuhair Muhammed Alaas

Wayne State University Dissertations

ABSTRACT

CASCADED CONVERTERS FOR INTEGRATION AND MANAGEMENT OF GRID-LEVEL ENERGY STORAGE SYSTEMS

by

ZUHAIR ALAAS

December 2017

Advisor: Dr. Caisheng Wang

Major: ELECTRICAL ENGINEERING

Degree: Doctor of Philosophy

This research work proposes two cascaded multilevel inverter structures for BESS. The gating and switching control of switching devices in both inverter typologies are done by using a phase-shifted PWM scheme. The first proposed isolated multilevel inverter is made up of three-phase six-switch inverter blocks with a reduced number of power components compared with traditional isolated CHB. The suggested isolated converter has only one battery string for three-phase system that can be …

An Effective Methodology For Suppressing Structure-Borne Sound Radiation, Lingguang Chen

Wayne State University Dissertations

ABSTRACT

AN EFFECTIVE METHODOLOGY FOR SUPPRESSING

STRUCTURE-BORNE SOUND RADIATION

by

LINGGUANG CHEN

December 2017

Advisor: Dr. Sean F. Wu

Major: Mechanical Engineering

Degree: Doctor of Philosophy

This dissertation is primarily concerned with the development of an effective methodology for reducing structure-borne sound radiation from an arbitrarily shaped vibrating structure. There are three major aspects that separate the present methodology from all the previous ones. Firstly, it is a non-contact and non-invasive approach, which is applicable to a class of vibrating structures encountered in engineering applications. Secondly, the input data consists of a combined normal surface velocity distribution on a portion …

Essays On Stochastic Programming In Service Operations Management, Sina Faridimehr

Wayne State University Dissertations

Deterministic mathematical modeling is a branch of optimization that deals with decision making in real-world problems. While deterministic models assume that data and parameters are known, these numbers are often unknown in the real world applications.The presence of uncertainty in decision making can make the optimal solution of a deterministic model infeasible or sub-optimal.

On the other hand, stochastic programming approach assumes that parameters and coefficients are unknown and only their probability distribution can be estimated. Although stochastic programming could include uncertainties in objective function and/or constraints, we only study problems that the goal of stochastic programming is to maximize …

Pet Imaging Of Early Therapeutic Response In Solid Tumors, Stephanie J. Blocker

Wayne State University Dissertations

An important pillar of precision medicine for oncology is the ability to identify patients who respond to treatment early into their therapy. Positron emission tomography (PET) allows physicians and researchers to measure changes in tumor behavior prior to noticeable differences in morphology.

Objective: Determine the utility of multiple tracers for PET in assessing early changes in tumor activity that result from treatment.

Methods: Two tracers for PET were studied. 64Cu-labeled liposomes were used to assess changes in liposome delivery two solid colon tumors early into treatment with bevacizumab (Bev). 18F-FMAU thymidine analog (1-(2'-deoxy-2'-fluoro-beta-D-arabinofuranosyl)thymine), was utilized to detect early response to …

Strain Rate Dependence And Impact Behavior Of Abs (Acrylonitrile-Butadiene-Styrene) Amorphous Thermoplastic, Mehmet Akif Dundar

Wayne State University Dissertations

ABS (acrylonitrile-butadiene-styrene) is an extensively utilized amorphous thermoplastic in numerous engineering applications, such as marine, aerospace, automotive, electronic enclosures and housings because it offers many distinctive material properties, including good impact resistance, high toughness, high stiffness and high compressive strength. The most considerable material quality of ABS is its excellent impact resistance compared to other amorphous thermoplastics and this distinguished material ability makes the ABS very appealing for such unique engineering applications where a good impact resistance is highly needed. Nevertheless, the material behavior of ABS under impact loads is highly complex due to chaotically arranged chain macromolecules and randomly …

Biomechanics Of Concussion: The Importance Of Neck Tension, Ron Jadischke

Wayne State University Dissertations

Linear and angular velocity and acceleration of the head are typically correlated to concussion. Despite improvements in helmet performance to reduce accelerations, a corresponding reduction in the incidence of concussion has not occurred (National Football League [NFL] 1996 – present).

There is compelling research that forces on and deformation to the brain stem are related to concussion. The brain stem is the center of control for respiration, blood pressure and heart rate and is the root of most cranial nerves. Injury to the brain stem is consistent with most symptoms of concussion reported in the National Football League and the …

Reliability Based Design Optimization Of Load And Rating Models For Bridge Structures In Michigan, Vahid Kamjoo

Wayne State University Dissertations

The main objective of this study is to develop optimal live load models for design and rating of bridges using reliability-based design optimization (RBDO) methodology, such that target reliability levels for bridge girders subjected to Michigan traffic loads can be consistently met. Traffic data from 20 high-fidelity weigh-in-motion (WIM) sites collected over a two-year period across Michigan will be used for statistical analysis. From the filtered data, load effects are generated for a series of hypothetical bridges considering spans from 20 to 200 ft. and girder spacings from 6 to 12 ft. Simple moments and shears, for both single lane …

Design Of A Modular Endothelialized Platform For Vascularized Bone Regeneration, Kevin Barrett Miles

Wayne State University Dissertations

The gold standard for bone regeneration requires harvesting a piece of healthy bone from the patient through a painful procedure, but this piece of autologous bone graft contains the bone and endothelial cells required to rapidly regenerate bone in a defect. We have developed a modular bone regeneration platform, composed of mesenchymal stem cells (MSCs) and hydroxyapatite (HAP) microgranules encapsulated in microcapsules, to replace autologous graft harvesting. The microcapsules are composed of a polyelectrolyte membrane formed by the ionic-complex reaction between chondroitin 4-sulfate (C4S) and chitosan. The specific aims of this thesis were to 1) examine the ability of C4S/HAP/chitosan …

Fundamental Investigation Of The Electrocatalytic Activity Of Layered Mixed Metal Oxides For Low Temperature Oxygen Electrocatalysis, Ayad M. Nacy

Wayne State University Dissertations

Li–O2 (Li–air) batteries are among the most promising energy storage technologies due to their high theoretical specific capacity and energy density. Key challenges with this technology include high overpotential losses associated with catalyzing the electrochemical reactions (i.e., oxygen reduction and evolution reactions) at the cathode of the battery. One way to address this challenge is to incorporate an active electrocatalyst, such as first-order Ruddlesden-Popper series of layered oxides. We show that the composition of the A-site in first-order Ruddlesden-Popper series of layered oxides (A2BO4) has a significant effect in the electrochemical activity of Li-O2 cathodes. Among the oxides composed of …

Flexural Creep Behavior Of Adhesively Bonded Metal And Composite Laminates, Hasan M. Nuwayer

Wayne State University Dissertations

Adhesively bonded structures exhibit time dependent behavior when subjected to constant load (creep). In this investigation, long-term creep behavior of adhesively bonded aluminum and carbon fiber composite beams under flexural loading was investigated. Three point bending test was selected because of its simplicity and the fact that bending stresses are quite common. In this study, two types of adhesively bonded beam specimens were tested: specimens prepared by adhesively bonding two aluminum beams and specimens prepared by adhesively bonding two unidirectional carbon fiber laminated beams. Accelerated creep tests were performed at higher temperatures up to 60 °C and deflection was measured …

Development Of Nanostructured Austempered Ductile Cast Iron, Saranya Panneerselvam

Wayne State University Dissertations

Austempered Ductile Cast Iron is emerging as an important engineering materials in recent years because of its excellent combination of mechanical properties such as high strength with good ductility, good fatigue strength and fracture toughness together with excellent wear resistance. These combinations of properties are achieved by the microstructure consisting of acicular ferrite and high carbon austenite. Refining of the ausferritic microstructure will further enhance the mechanical properties of ADI and the presence of proeutectoid ferrite in the microstructure will considerably improve the ductility of the material.

Thus, the focus of this investigation was to develop nanostructured austempered ductile cast …

Development Of A Finite Element Pelvis And Lower Extremity Model With Growth Plates For Pediatric Pedestrian Protection, Ming Shen

Wayne State University Dissertations

Finite element (FE) model is a useful tool frequently used for investigating the injury mechanisms and designing protection countermeasures. At present, no 10 years old (YO) pedestrian FE model has been developed from appropriate anthropometries and validated against limitedly available impact response data. A 10 YO child FE pelvis and lower extremities (PLEX) model was established to fill the gap of lacking such models in this age group. The baseline model was validated against available pediatric postmortem human subjects (PMHS) test data and additional scaled adult data, then the PLEX model was integrated to build a whole-body FE model representing …

Zwitterionic Polymer Materials For Nanoparticle Stabilization, Cell Encapsulation And Anti-Fouling Coating, Wei Wang

Wayne State University Dissertations

Based on the superior anti-fouling property, the zwitterionic materials had great potential in applications such as medical implants, medical device coating, and marine coating industry. This thesis will focus on the applications of zwitterionic materials in stabilizing carbon nanoparticles, as implantable devices and durable coating on medical devices for long-term anti-microbial purposes. Chapter 2 of the thesis will discuss a simple method to synthesis carbon nanoparticles stabilized by zwitterionic polymers. Chapter 3 of the thesis reports the use of zwitterionic hydrogel to encapsulate islet of Langerhans to treat Type 1 diabetes. In Chapter 4 and 5, several methods were developed …

Bioreducible Layer-By-Layer Films For Gene Delivery, Lingxiao Xie

Wayne State University Dissertations

Layer-by-Layer (LbL) gene delivery system is fabricated by polycation and plasmid DNA alternative deposition based on electrostatic force between each other. This dissertation explored the relationship between LbL film assembly and disassembly. Demonstrated that the film disassemble process is closely related to film interior structure. LbL interlayer diffusion, which is caused by the polyelectrolytes own properties, such as polymer chain length, molecular weight, and charge density, can influence film growth mode. The interlayer diffusion is the main reason to lead fast and bulk DNA releasing of bioreducible LbL film. Preventing interlayer diffusion by inserting small diffusion coefficient polymer, such as …

Mechanical Interventions In Soft Tissue Repair, Elizabeth Marie Meier

Wayne State University Dissertations

This body of work sets to investigate some of these mechanical interventions that are designed to promote wound healing, repair, or even replace an injured tissue. By investigating three separate tissues and three separate mechanical interventions, we can draw conclusions about the implications of including mechanical interventions in biomedical research and clinical treatments. The use of sutures to close wounds is highly common, however the effects of sutures on the tensile mechanics of human skin are largely unknown. To evaluate how sutures may affect uniaxial tensile mechanics, human skin samples were sutured and loaded in tension in multiple orientations. The …

A Scalable Solution For Interactive Video Streaming, Kamal Kayed Nayfeh

Wayne State University Dissertations

This dissertation presents an overall solution for interactive Near Video On Demand (NVOD) systems, where limited server and network resources prevent the system from servicing all customers’ requests. The interactive nature of recent workloads complicates matters further. Interactive requests require additional resources to be handled. This dissertation analyzes the system performance under a realistic workload using different stream merging techniques and scheduling policies. It considers a wide range of system

parameters and studies their impact on the waiting and blocking metrics. In order to improve waiting customers experience, we propose a new scheduling policy for waiting customers that is fairer …

Evolving Clustering Algorithms And Their Application For Condition Monitoring, Diagnostics, & Prognostics, Fling Finn Tseng

Wayne State University Dissertations

Applications of Condition-Based Maintenance (CBM) technology requires effective yet generic data driven methods capable of carrying out diagnostics and prognostics tasks without detailed domain knowledge and human intervention. Improved system availability, operational safety, and enhanced logistics and supply chain performance could be achieved, with the widespread deployment of CBM, at a lower cost level. This dissertation focuses on the development of a Mutual Information based Recursive Gustafson-Kessel-Like (MIRGKL) clustering algorithm which operates recursively to identify underlying model structure and parameters from stream type data. Inspired by the Evolving Gustafson-Kessel-like Clustering (eGKL) algorithm, we applied the notion of mutual information to …

Toward Human-Like Automated Driving: Learning Spacing Profiles From Human Driving Data, Syed Ali

Wayne State University Dissertations

For automated driving vehicles to be accepted by their users and safely integrate with traffic involving human drivers, they need to act and behave like human drivers. This not only involves understanding how the human driver or occupant in the automated vehicle expects their vehicle to operate, but also involves how other road users perceive the automated vehicle’s intentions. This research aimed at learning how drivers space themselves while driving around other vehicles. It is shown that an optimized lane change maneuver does create a solution that is much different than what a human would do. There is a need …