Engineering Commons^™

Design Of Metal Oxides/Metal Sulfides For The Improvement Of Sodium Ion Batteries, David E. Flores

Theses and Dissertations

Herein, the improvement in performance for sodium ion batteries (NIBs) is discussed from available literature and work conducted in the laboratory setting to demonstrate the ability of sodium to perform in the world of energy storage. The reason that sodium is being explored as an alternative to Lithium in energy storage devices is because of the potential depletion of the lithium in the world causing lithium prices to surge. Researchers show that many Sn, Sb, Ge, and other composites perform well as anode materials within NIBs. The research conducted in the dissertation applies the Forcespinning method to produce fibers for …

Study Of Latent Heat Thermal Energy Storage Systems For Concentrated Solar Power Plants, Hermes Chirino

Theses and Dissertations

Concentrated Solar Power (CSP) using phase change material (PCM) as the storage medium in the Thermal Energy Storage (TES) system is a promising technology for large scale utilization of solar thermal energy because heat latent heat thermal energy storage (LHTES) systems can store more energy as the latent heat during the melting process.

This study analyzes the different dimensionless parameters from the 1-D transient enthalpy-based mathematical model used to simulate the heat transfer and flow within the LHTES system. These dimensionless parameters are varied and analyzed with the main objective of increasing thermal energy storage efficiency and exergy efficiency of …

Growth And Characterization Of Gallium Oxide Thin Films And Devices, Jorge Castillo

Theses and Dissertations

Gallium oxide has promising physical and electrical properties for power applications and optoelectronics. thermally grown oxide developed from sputtered GaN layers and gallium oxide substrates will be characterized. The study will evaluate a variety of temperatures in order to investigate the advantages and disadvantages on each of the synthetization techniques.

Security Evaluation Of Virtualized Computing Platforms, Ganesh Reddy Gunnam

Theses and Dissertations

In this thesis, security experiments were conducted to evaluate embedded security protocol performance of two leading server operating systems, Apple’s MAC OS server LION Vs. Microsoft’s Windows server 2012 R2 OS under different types of security attack. Furthermore, experiments were conducted to understand and evaluate the effect of virtualization using Hyper-V with Windows 2012 R2 OS on MAC hardware platform. For these experiments, connection rate, connection latency, non-paged pool allocations and processor core utilization for different OS, virtual machines, and under different traffic types were measured.

Single Tower Crane Allocation Models Using Ant Colony Optimization, Carlos Abelardo Trevino

Theses and Dissertations

The construction industry greatly benefits from the utilization of heavy machines and equipment to accomplish successful projects. Tower cranes, in specific, have a crucial role in the transportation of material loads across the site. Because these machines are fixed to the ground, it is essential for planners and managers to position them in a location that provides the most efficient transfer of materials possible. This is commonly known as the tower crane allocation problem, and many researchers have attempted to optimize the tower crane location using mathematical, artificial intelligence, and simulation approaches. However, many works from the literature contain critical …

Des And Tdes Performance Evaluation For Non-Pipelined And Pipelined Implementations In Vhdl Using The Cyclone Ii Fpga Technology, Edni Del Rosal

Theses and Dissertations

Two ongoing issues that engineers must face in the new era of data analytics are performance and security. Field Programmable Gate Arrays (FPGAs) offer a new solution for optimizing the performance of applications while the Data Encryption Standard (DES) and the Triple Data Encryption Standard (TDES) offer a mean to secure information. In this thesis we present a Non-Pipelined and Pipelined, in Electronic Code Book (EBC) mode, implementations in VHDL of these two commonly utilized cryptography schemes. Using Altera Cyclone II FPGA as our platform, we design and verify the implementations with the EDA tools provided by Altera. We gather …

Effect Of Processing Parameters On The Electrochemical Performance Of Forcespun Metal Oxide/Carbon Composite Fibers For Li-Ion Batteries, Howard A. Campos

Theses and Dissertations

Metal oxides have been gaining interest as electrode materials for rechargeable Li-ion batteries due to various properties including low cost, low toxicity, and high theoretical capacity. In this research work the effect of two different metal oxide/carbon fiber composites, Fe3O4/C and ZnO/C, on the electrochemical performance for Li-ion batteries will be explored. This is also the first time that results are reported, to the best of our knowledge, of these fiber composites through the Forcespinning ® method. Scanning electron microscopy (SEM), Energy-Dispersive X-ray Analysis (EDS), X-ray photoelectron spectroscopy (XPS), powder X-ray diffraction (XRD), and electrochemical analysis were used to investigate …

Characterization Of Lift And Drag On Two Dimensional Airfoils With And Without Sinusoidal Leading Edges, Gregorio I. Acosta

Theses and Dissertations

An experimental investigation was taken on a 63-021 NACA airfoil, to characterize lift and drag and how the effects of sinusoidal leading edges affect the aerodynamic properties. A theoretical model is also purposed by implementing a perturbation on thin-airfoil theory.

Two sets of airfoils were machined and tested inside a low-speed open circuit wind tunnel. Data from a pressure scanner and particle image velocity will give an insight of how the modified leading edges affect the aerodynamic properties. A Fourier series expansion was used to solve for the lifting-line model, by use of thin-airfoil theory and complex number theory.

Algan/Gan Hemt By Magnetron Sputtering System, Roman Garcia Perez

Theses and Dissertations

In this thesis, the growth of the semiconductor materials AlGaN and GaN is achieved by magnetron sputtering for the fabrication of High Electron Mobility Transistors (HEMTs). The study of the deposited nitrides is conducted by spectroscopy, diffraction, and submicron scale microscope methods. The preparation of the materials is performed using different parameters in terms of power, pressure, temperature, gas, and time. Silicon (Si) and Sapphire (Al2O3) wafers are used as substrates. The chemical composition and surface topography of the samples are analyzed to calculate the materials atomic percentages and to observe the devices surface. The instruments used for the semiconductors …

Development Of Lower Rio Grande River Water Quality Transportation Numerical Model For Bi-National River Management, Jose O. Gonzalez

Theses and Dissertations

Traditionally, water quality modelling has focused on modelling individual water bodies. However, water quality management problems must be analyzed at the larger scale to include influences from various water bodies that are interconnected. This paper provides a study on the hydrologic and quality transportation calculation by developing a hydrodynamic (unsteady state) channel routing model using a water-balanced approach. A one dimension Lagrangian river model was developed and applied to the 210 plus miles for the lower Rio Grande River Basin from the Falcon Dam to the head water of Brownsville that pours onto the Gulf of Mexico. This model can …

Multi-Functional System For Biomedical Application Using Ac Electrokinetics, Rakesh Guduru

Theses and Dissertations

Manipulation of fluids in a small volume is often a challenge in the field of Microfluidics. While many research groups have addressed this issue with robust methodologies, manipulating fluids remains a scope of study due to the ever-changing technology (Processing Tools) and increase in the demand for “Lab-On-a-Chip” devices in biological applications. This thesis peruses the flow pattern of the orthogonal electrode pattern and circular electrode providing, examples of the flow patterns and the process micromixing. Characteristics of a multifunctional system were demonstrated using orthogonal electrode and circular electrode patterned device. Conductivity of the fluids were chosen such they reflect …

A Simple Multi-Core Functional Cache Design Simulator, Rano Mal

Theses and Dissertations

This paper presents a flexible multi-core cache memory simulator to design and evaluate memory hierarchies for general-purpose or embedded processors. The proposed simulator needs to work with Pin, which is an open-source dynamic instrumentation tool provided by Intel. The Pin intercepts the execution of instructions and generates a sequence code (traces) to feed into the simulator for any selected benchmark programs, such as SPEC2006, SPLASH2, or PARSEC. We have a plan to release this simulator as an open-source (like Pin) to support research and/or academic community for their simulation works. In addition, we expect more functions can be updated on …

Discrete Element Analysis Of Scb Variability: Asphalt Mixtures, David Saul Renteria

Theses and Dissertations

The Semi-Circular Bending (SCB) test was modeled using the Discrete Element Method (DEM) implemented in numerical software Particle Flow Code (PFC). The fracture analysis of the SCB was studied using two mixtures gradation, Superpave and Coarse Matrix High Binder. The aggregate phase in the model was achieved by using two-dimensional aggregate images with different angularity indexes. The study of the variability of the SCB extends to the random generation of aggregate particles and air voids in the model, in addition to changing the properties at the interface between the aggregate and mastic phases. Results indicate the strong influence of the …

Design And Implementation Of A Pid Controller For The Low-Speed Wind Tunnel, Carlos F. Vasquez

Theses and Dissertations

The purpose of this research is to investigate the implementation of an external PID controller on an existing variable frequency motor drive (VFD) while using MODBUS communication to read/write data from a LabVIEW station. LabVIEW is the chosen user interface and programming language. It allows human-machine interfacing for the collecting, displaying of information, and automation of the system. The main objective was to develop a new controller to facilitate the operation of the wind tunnel. The current setup makes the operator set the motor frequency manually which then correlates to a test section wind velocity. This involved a calibration period …

Casimir And Van Der Waals Effects On Electrostatically Actuated Nems Resonator Sensors, Christian Reyes

Theses and Dissertations

The behavior of nano and micro-electromechanical systems (N/MEMS) cantilever beams under electrostatic actuation is studied. The cantilever system is actuated by soft AC voltage that is set to a frequency of near half natural and near natural frequency of the beam. These actuating frequencies result in primary and parametric resonances, respectively. Two methods are used to analytically model the behavior of the cantilever. The first method is Method of Multiple Scales (MMS), which is a perturbation method that works for small parameters. The second method is the Reduced Order Method (ROM), which is a Galerkin method that works for large …

A High Density Micro-Electrocorticography Device For A Rodent Model, Mukhesh Kumar Koripalli

Theses and Dissertations

Electrocorticography (ECoG) is a methodology for stable mapping of the brain surface using local field potentials (LFPs) with a wide cortical region, high signal fidelity, and minimal invasiveness to brain tissue. To compare surface ECoG signals with inter-cortical neuronal activity, we fabricated a flexible handcrafted ECoG electrode made with economically available materials. This research is on a Lewis rat implanted with a handcrafted 256-channel, non-penetrative ECoG electrode covering an area of 7mm x 7mm on the cortical surface. This device was placed on the motor and somatosensory cortex of the brain to record signals with an active animal. The recordings …