Engineering Commons^™

Blast-Building Leaders For Advancing Science And Technology: A Partnership Between The Virginia Space Grant Consortium And The University Of Virginia, Virginia Polytechnic Institute, And Old Dominion University, Cynthia Tomovic, Mary Sandy, Julie Back, Vukica Jovanovic, Kim Lester, Edward Murphy, Sueanne Mckinney, Mileta Tomovic

STEMPS Faculty Publications

This paper presents the development and delivery of educational summer intensive programs for high school students that are designed to encourage students’ interests in the STEM-related fields and the motivation to pursue a STEM-related degrees in college. BLAST (Building Leaders to Advance Science and Technology) is designed as a summer-intensive, residential, on-campus STEM-learning experience for rising ninth and tenth graders. With the intention of improving the STEM-related workforce pipeline in the Commonwealth of Virginia, Virginia Space Grant Consortium (VSGC) offers multiple BLAST programs across the Commonwealth. BLAST programs are designed as intensive three-day, STEM-related three-hour lecture-lab experiences that are reinforced …

Overview Of Standards For Technological And Engineering Literacy (Other), Philip Reed, Tyler Love, Scott Bartholomew, Kelly Dooley

STEMPS Faculty Publications

In 2020, the International Technology and Engineering Educators Association (ITEEA) published Standards for Technological and Engineering Literacy: The Role of Technology and Engineering in STEM Education (STEL) [1]. These standards open with a clear rationale why all Pk-12 students should study technology and engineering:

Technology and engineering are pervasive in all aspects of our lives. Every human activity is dependent upon the products, systems, and processes created to help grow food, provide shelter, communicate, work, and recreate. As the world grows more complex, it is increasingly important for everyone to understand more about technology and engineering [1, p. 1].

The …

Standards For Technological And Engineering Literacy: Addressing Trends And Issues Facing Technology And Engineering Education, Johnny J. Moye, Philip A. Reed

STEMPS Faculty Publications

The article offers information on addressing trends and issues facing technology and engineering education. It mentions future challenges, students need to "have a broad conceptual understanding of technology and its place in society, enabling them to be active participants in the technological world and careful creators and users of technology.

Implementing Stel, Marie Hoepfl, Thomas Loveland, Philip A. Reed

STEMPS Faculty Publications

No abstract provided.

Stel Benchmark Verb Alignment To Cognitive, Affective, And Psychomotor Domains, T. Shown, Philip A. Reed

STEMPS Faculty Publications

(First paragraph) Curriculum developers and classroom teachers often need to make sure they are teaching and assessing students at the appropriate levels of the cognitive, affective, and psychomotor domains. The STEL benchmarks are written with active verbs to target different levels of these domains. In addition, curriculum developers and classroom teachers want to know whether the benchmarks are at the factual, conceptual, procedural, or metacognitive level of knowledge. The second resource being provided on ITEEA’s interactive STEL website will identify these factors for all 142 STEL benchmarks. This tool was developed to help insure the alignment of the three domains …

Cybersecurity Education Through Technological And Engineering Literacy Standards, Philip A. Reed, Steven A. Barbato

STEMPS Faculty Publications

No abstract provided.

Analysis Of Blended And Multi-Modal Instruction And Its Effects On Spatial Visualization Ability, Diana Bairaktarova, Daron Williams, Petros Katsioloudis

STEMPS Faculty Publications

For the last decade, remedial spatial visualization training has been offered to first-year engineering students in traditional classroom settings where students attend class and interact face-to-face with an instructor and peers. An alternative to the traditional pedagogical approach is a multi-modal blended learning format that combines in-class instruction with videos that can be viewed at the student’s convenience. The new setting affords students the opportunity to repeatedly revisit the basic instruction at the time and place of their choosing. This case study investigated student outcomes in a blended multi-modal Introduction to Spatial Visualization course that integrated video lectures; free-hand sketching …

The Legacy Project: Rodney L. Custer, Dte, Rodney L. Custer Dte, Johnny J. Moye Dte

STEMPS Faculty Publications

An interview with vice president of Dept. of Technical Education, Rodney Custer is presented. Topics discussed include interest in technology and engineering education; academic qualification; and experience as university department chair administrator and working with the Center for Math, Science, and Technology (CeMast).

Creating The Fleet Maker - Lessons Learned From The First Series Of Workshops On Maker Concepts For Active Duty Personnel, Karina Arcaute, Michel Albert Audette, Vukica Jovanovic, Anthony Dean, Dipankar Ghosh

STEMPS Faculty Publications

The US Navy has supported research related to the 3D printing or Additive Manufacturing area for more than 20 years. More recently, efforts like the Print the Fleet initiative and Marine Makers are exploring ways to design and create solutions to future problems with the possibility of reducing maintenance costs, increasing equipment readiness, and improving combat effectiveness. The Creating the Fleet Maker project is an effort supported by the Navy and Marine Corps Science, Technology, Engineering and Mathematics Education, Outreach and Workforce Program of the Office of Naval Research. It examines the concept of making in order to develop skills …

A Comparative Analysis Of Holographic, 3d-Printed, And Computer-Generated Models: Implications For Engineering Technology Students' Spatial Visualization Ability, Petros J. Katsioloudis, Mildred V. Jones

STEMPS Faculty Publications

A number of studies indicate that the use of holographic displays can influence spatial visualization ability; however, research provides inconsistent results. Considering this, a quasi-experimental study was conducted to identify the existence of statistically significant effects on sectional view drawing ability due to the impacts of holographic displays. In particular, the study compared the use of three different types of displays: 3D printed model, computer generated model, and holographic model to determine whether a significant difference exists towards sectional view drawing ability, among engineering technology students. According to the results of this study, it is suggested that the impact of …

Virginia Technology And Engineering Education Association 1978-2018: Celebrating Six Decades Of Progress, Ron Vickers, Philip A. Reed, George R. Willcox

STEMPS Faculty Publications

(First Paragraph) Technology and engineering education in Virginia and the nation is coming to a crossroads. Recent growth in state directives, new courses, and ever-changing funding for science, technology, engineering, and mathematics (STEM) education influences the supply of Technology Education teachers, leading to what some say is a dire future for our profession and association. This history is gathered to emphasize the importance and value of what we teach in Virginia public schools. It also captures who was involved with the association leadership over the years.

Effectiveness Of Drafting Models For Engineering Technology Students And Impacts On Spatial Visualization Ability: An Analysis And Consideration Of Critical Variables, Petros J. Katsioloudis, Jill E. Stefaniak

STEMPS Faculty Publications

Results from a number of studies indicate that the use of drafting models can positively influence the spatial visualization ability for engineering technology students. However, additional variables such as light, temperature, motion and color can play an important role but research provides inconsistent results. Considering this, a set of 5 quasi-experimental studies, was conducted to identify additional critical variables. According to the results, a dynamic, 3Dprinted drafting model, presented with a blue background under lighting conditions between 500–750 lux had the highest impact on spatial visualization ability of engineering technology students.

Fostering Giftedness And Creativity: Implementing Engineering By Design In Kuwait, Nathan Mentzer, Philip A. Reed, Meshari Alnouri, Mohammad Barbarji

STEMPS Faculty Publications

The article offers information on a partnership between the International Technology & Engineering Educators Association (ITEEA) and the Sabah Al Ahmad Center for Giftedness and Creativity (SACGC) to support innovation and design education. The partnership is aimed towards the implementation of the Engineering byDesign (EbD) curriculum and contribute towards building a Kuwaiti society that fosters giftedness and creativity.

Effects Of Light Reflection On Spatial Visualization Ability And Implications For Engineering Technology Students, Petros Katsioloudis, Mildred Jones

STEMPS Faculty Publications

Results from a number of studies indicate that the type of light generated by the reflection on the surface of different types of surfaces can influence the spatial visualization ability; however, research provides inconsistent results. Considering this, a quasi-experimental study was conducted to identify the existence of statistically significant effects on spatial visualization ability as measured by the Mental Cutting Test and Sectional View drawing ability due to the impacts of light reflection. In particular, the study compared three types of light reflection; mirror, specular and diffuse and whether a significant difference exists among engineering technology students. According to the …

Effects Of Light Intensity On Spatial Visualization Ability, Petros J. Katsioloudis ., Mildred Jones

STEMPS Faculty Publications

A plethora of technological advances have happened since artificial illumination was developed by Thomas Edison. Like technology has had an effect in many areas in the modern civilization it also made a difference in the classroom. Nowadays, students can have instruction in classrooms with no external windows, even during gloomy winter or rainy days, and virtually during any hour of the day. Several lightning devices are being used, ranging from energy efficient LEDs to fluorescent lighting. Some forms of lighting methods have been found to be inappropriate for prolonged exposure to the human eye such as various gas-discharge lamps that …

Impacts Of Effective Temperature On Sectional View Drawing Ability And Implications For Engineering And Technology Education Students, Petros J. Katsioloudis

STEMPS Faculty Publications

Temperature can influence thermal comfort, working performance, and social behavior. In a classroom that is slightly cool, an assumption can be made that learning could be affected in a negative way. Considering this, a quasi-experimental study was done to determine if a significant difference of effective temperature have an effect on students’: a) spatial visualization ability, as measured by the MCT and b) ability to sketch a sectional view drawing. While not statistically significant, the students who received treatment using warm water outperformed their peers who received treatment using cold and hot water temperatures, respectively.

Use Of Virtual Reality Head-Mounted Displays For Engineering Technology Students And Implications On Spatial Visualization, Petros Katsioloudis, Mildred Jones, Vukica Jovanovic

STEMPS Faculty Publications

Results from a number of studies indicate that the use of head-mounted displays can influence spatial visualization ability; however, research provides inconsistent results. Considering this, a quasi-experimental study was conducted to identify the existence of statistically significant effects on rotational view drawing ability due to the impacts of the displays. In particular, the study compared the use of three different types of displays; head-mounted, pc dynamic and 3D printed and whether a significant difference exists towards rotational view drawing ability, among engineering technology students. According to the results of this study it is suggested that the impact of the display …

Internet Of Things, John Ritz, Zane Knaack

STEMPS Faculty Publications

The internet has not only made information searching and instantaneous communications possible, it has also expanded the development of smart products that can be connected and controlled over the internet. Automobile manufacturers have used these devices during the past decade to make cars safer and assist drivers with updated information on vehicle operation. Today many more products can be operated and controlled from a smartphone or computer. Depending on your level of desired internet-connectedness, many home products are coming to the market with IoT connectivity. Much data is being collected and acted upon through databases. These developments should enable machines …

Comparing High School Students' And Adults' Perceptions Of Technology, Henry L. (Hal) Harrison Ii, Philip A. Reed

STEMPS Faculty Publications

This study compared high school student’s perceptions of technology and technological literacy to those perceptions of the general public. Additionally, individual student groups were compared statistically to determine significant differences between the groups. The ITEA/Gallup Poll instrument was used to survey high school student’s perceptions of technology in the study. The student population in question consisted of three subgroups: students enrolled in a standards-based technology education courses, students enrolled in a Project Lead the Way (PLTW) Principles of Engineering pre-engineering course, and students enrolled in a general education course (language arts, mathematics, or science). In addition, each student group’s perceptions …

Application Of Visual Cues On 3d Dynamic Visualizations For Engineering Technology Students And Effects On Spatial Visualization Ability: A Quasi-Experimental Study, Petros Katsioloudis, Vukica Jovanovic, Mildred Jones

STEMPS Faculty Publications

Several theorists believe that different types of visual cues influence cognition and behavior through learned associations; however, research provides inconsistent results. Considering this, a quasi-experimental study was done to determine if there are significant positive effects of visual cues (color blue) and to identify if a positive increase in spatial visualization ability for students in engineering technology courses is observed. According to the results of this study it is suggested that the use of the specific visual cue (color blue) provides no statistically significant higher scores versus the treatment that did not utilize any visual cues.

Impacts Of Music On Sectional View Drawing Ability For Engineering Technology Students As Measured Through Technical Drawings, Petros J. Katsioloudis, Mildred Jones, Vukica Jovanovic

STEMPS Faculty Publications

Results from a number of studies indicate that the use of different types of music can influence cognition and behavior; however, research provides inconsistent results. Considering this, a quasi-experimental study was conducted to identify the existence of statistically significant effects on sectional view drawing ability due to the impacts of music. In particular, the study compared the use of three different types of music; classical, rock, heavy metal and whether a significant difference exists towards sectional view drawing ability, among engineering technology students. According to the results of this study it is suggested that the impact of music provides no …

Web Tools: Keeping Learners On Pace, Mickey Kosloski

STEMPS Faculty Publications

One of the greatest challenges in teaching technology and engineering is pacing. Some students grasp new technological concepts quickly, while others need repetition and may struggle to keep pace. This poses an obstacle for the technology and engineering teacher, and is particularly true when teaching students to build a website. However, there are a plethora of online tools available that can assist learners in building a website. This article identifies some of the tools that may be used in the classroom and for classroom-oriented, teacher-hosted websites. While specific examples are provided, Web search terms are denoted at the end of …

Evaluation Of Static Vs. Dynamic Visualizations For Engineering Technology Students And Implications On Spatial Visualization Ability: A Quasi-Experimental Study, Petros Katsioloudis, Daniel Dickerson, Vukica Jovanovic, Mildred Jones

STEMPS Faculty Publications

The benefit of using static versus dynamic visualizations is a controversial one. Few studies have explored the effectiveness of static visualizations to those of dynamic visualizations, and the current state of the literature remains somewhat unclear. During the last decade there has been a lengthy debate about the opportunities for using animation in learning and instruction. More specifically it has been shown that dynamic visualizations often provide no advantages over static visualizations. If they had shown advantages, it was due to the fact that more information was available in the animated than in the static version. Given this result, the …

Using Computer-Aided Design Software And 3d Printers To Improve Spatial Visualization, Petros Katsioloudis, Millie Jones

STEMPS Faculty Publications

Many articles have been published on the use of 3D printing technology. From prefabricated homes and outdoor structures to human organs, 3D printing technology has found a niche in many fields, but especially education. The education of technology and engineering students has come a long way from traditional instruction using hand drawings. Although drawings may still be a part of a students learning, computer technology has been embraced in this field for several years. With the introduction of AutoCAD technical drawing programs and now 3D printing, learners can use 3D printed models to develop their spatial abilities in technology and …

Spatial Visualization Ability And Impact Of Drafting Models: A Quasi Experimental Study, Petros J. Katsioloudis, Vukica Jovanovic

STEMPS Faculty Publications

A quasi experimental study was done to determine significant positive effects among three different types of visual models and to identify whether any individual type or combination contributed towards a positive increase of spatial visualization ability for students in engineering technology courses. In particular, the study compared the use of different visual models - a 3D printed solid object, a 3D computer generated drawing and a 2D drawing.

Comparative Analysis Of Research Priorities For Technology Education, Gene Martin, John Ritz

STEMPS Faculty Publications

This study compares and contrasts the most relevant research priorities identified through two Delphi studies by the authors. The panels of experts used in these studies, an international and a U.S. study group, were asked to identify important topics to guide future research studies for the school subject of technology education. Both panels sought to determine the most relevant issues that need to be researched related to K-12 technology education and preparation for teaching this school subject. This study reports the similarities of research priorities identified by both expert panels, then contrasts the major differences that the groups identified for …

Technology And Engineering Education Doctoral Students' Perceptions Of Their Profession, Gene Martin, John Ritz, Michael Kosloski

STEMPS Faculty Publications

The growth and vitality of both technology and engineering education professions rely on the quality of contributions of its new and emerging leaders. Many of these leaders are currently enrolled students in doctoral programs. These students will be challenged to assume leadership roles in which they are not currently engaged (Ehrenberg, Jakubson, Groen, So, & Price, 2007). Some students may choose to focus their careers in developing new curricula; some will become active in grant writing and grant procurement some will choose to serve as officers in their professional organizations; and others will contribute to the body of literature in …

Integrating Technology And Engineering In A Stem Context, Barry N. Burke, Philip A. Reed, John G. Wells, Robert E. Yager (Ed.), Herbert Brunkhorst (Ed.)

STEMPS Faculty Publications

(First paragraph) Imagine students entering the classroom with an enthusiasm that cannot be contained. They come from all walks of life and with different experiences and backgrounds and are eager to engage in learning. Inspiration and innovation are on their mind. What they learned in their science and math classes is now being applied in another class they take called Technology and Engineering. Opportunity is what they see for their future. Something about connecting all the dots from all their classes propels them to change their outlook, to get involved, to get excited about school and to envision their future.

An Engineering Design Stem Project: T-Shirt Launcher, Todd D. Fantz, Melva R. Grant

STEMPS Faculty Publications

Technology education has the potential to be the glue for integrating science, technology, engineering, and mathematics (STEM) education through the use of the design process. This should result in increased student interest in science and math, resulting in increased standardized science and math scores (Silk, C. Schunn, & Strand, 2009). In order for this to happen, students need to integrate their grade-level mathematics and science content knowledge in their technology and/or engineering design (Tran & Nathan, 2010). Hopefully, this can be accomplished without losing student interest generated by hands-on, kinesthetic learning. This article provides one example of getting technology education …

Don't Just Cover The Engineering Design Process, Patent It!, Philip A. Reed

STEMPS Faculty Publications

The article discusses the importance of understanding intellectual property (IP) concept for students of engineering design process. It highlights that IP classification are of four types which includes patent, trademarks and copyright. The article further offers brief information on process of obtaining a utility patent for technological inventions.