Engineering Commons^™

Application And Evaluation Of Lighthouse Technology For Precision Motion Capture, Soumitra Sitole

Masters Theses

This thesis presents the development towards a system that can capture and quantify motion for applications in biomechanical and medical fields demanding precision motion tracking using the lighthouse technology. Commercially known as SteamVR tracking, the lighthouse technology is a motion tracking system developed for virtual reality applications that makes use of patterned infrared light sources to highlight trackers (objects embedded with photodiodes) to obtain their pose or spatial position and orientation. Current motion capture systems such as the camera-based motion capture are expensive and not readily available outside of research labs. This thesis provides a case for low-cost motion capture …

A Study On Modelling Spatial-Temporal Human Mobility Patterns For Improving Personalized Weather Warning, Yue Xu

Masters Theses

Understanding human mobility patterns is important for severe weather warning since these patterns can help identify where people are in time and in space when flash floods, tornados, high winds and hurricanes are occurring or are predicted to occur. A GIS (Geographic Information Science) data model was proposed to describe the spatial-temporal human activity. Based on this model, a metric was designed to represent the spatial-temporal activity intensity of human mobility, and an index was generated to quantitatively describe the change in human activities. By analyzing high-resolution human mobility data, the paper verified that human daily mobility patterns could be …

Streamwise Flow-Induced Oscillations Of Bluff Bodies - The Influence Of Symmetry Breaking, Tyler Gurian

Masters Theses

The influence of symmetry breaking on the flow induced oscillations of bluff bodies in the steamwise direction is studied. First, a series of experiments is conducted on a one-degree-of-freedom circular cylinder allowed to exhibit pure translational motion in the streamwise direction over a range of reduced velocities, 1.4 < U* < 4.4, corresponding to a Reynolds number range of 970 < Re < 3370. Two distinct regions of displacements were observed in reduced velocity ranges of 1.6 < U* < 2.5 and 2.75 < U* < 3.85. Measured force coefficients in the drag and lift direction were examined, along with the wake visualization, through the range of reduced velocities, to infer the resulting wake modes. A new Alternating Symmetric (AS) mode was found. This transition from symmetric to AS shedding occurred near the end of the first region of response. Similar tests were run with a square prism in the parameter space of 2.4 < U* < 5.8 and 757 < Re < 1900 over angles of incidence of 0° ≤ α ≤ 45°. A distinct region of lock-in is observed for α = 0°, 2.5°, 5°, 7.5° over 3.2 < U* < 5.4 for α = 0°, and decreasing with increasing α. The wake structures were found to be roughly symmetric for α = 0°, but transitioned towards asymmetry …

Processing Different Mixtures Of Regionally Available Resources To Create Pellets That Meet A Minimum Standard, Jacob Hixson

Masters Theses

There are several ways to produce energy today, one of the oldest is the gasification of biomass. This process uses a fire to heat the material until it starts to produce gasses that are used as fuel. There are several types of biomass that can be used, many of which have large pieces with low bulk densities. By pelletizing the biomass bulk density increases and allows the opportunity to add in other biomass materials.

There are standards for condensing large pieces of biomass to smaller pelletized materials. Pellet Fuels Institute has set minimum standards for pellets used in the different …

Smart Augmented Reality Instructional System For Mechanical Assembly, Ze-Hao Lai

Masters Theses

"Quality and efficiency are pivotal indicators of a manufacturing company. Many companies are suffering from shortage of experienced workers across the production line to perform complex assembly tasks such as assembly of an aircraft engine. This could lead to a significant financial loss. In order to further reduce time and error in an assembly, a smart system consisting of multi-modal Augmented Reality (AR) instructions with the support of a deep learning network for tool detection is introduced. The multi-modal smart AR is designed to provide on-site information including various visual renderings with a fine-tuned Region-based Convolutional Neural Network, which is …

Modulated Photothermal Radiometry: Detector Sensitivity Study And Experimental Setup, Jessica Nicole Seals

Masters Theses

"This thesis outlines the development of a system used for determining the surface thermal diffusivity of both non-irradiated and irradiated materials. The motivation for this work is to establish a modulated photothermal radiometry (PTR) system on the campus of Missouri University of Science and Technology. One of the main efforts described in this thesis is the design and construction of the physical apparatus. Along the way, it was necessary to perform a detailed sensitivity analysis of the system to determine whether the expected signal emitted from the sample falls within the bounds of detectivity for the HgCdTe (MCT) detector used …

Customized Multi-Group Cross Section Generation With Njoy For Discrete Ordinates Computed Tomography And Radiography Simulation, Steven Michael Wagstaff

Masters Theses

"The purpose of this work was to explore the creation of photoatomic multi-group cross section libraries to be used with a software package DOCTORS (Discrete Ordinates Computed TOmography and Radiography Simulator). This software solves the linear Boltzmann equation using the discrete ordinates method [1]. To create these libraries, NJOY2016 was used, creating both fine and broad energy multi-group cross section files. The cross section's accuracy was tested against an equivalent Monte Carlo simulation using MCNP6.

Two simulation geometries were used. The first, a cylindrical water phantom with a single source projection placed in front, simulating an X-ray radiography. The second …

Bridge Deck Assessment Using Visual Inspection, Ground Penetrating Radar, Portable Seismic Property Analyzer-Ultrasonic Surface Wave, Hammer Sounding And Chain Drag, Abdullah Hadi Zaid Alhaj

Masters Theses

"Integrated non-destructive techniques were utilized to assess the condition of a reinforced concrete bridge deck. There were two main objectives accomplished.

The first objective was to assess the integrity of the reinforced concrete bridge deck using four non-destructive techniques, namely visual inspection, ground penetrating radar, portable seismic property analyzer-ultrasonic surface wave, and hammer sounding and chain drag. Visual inspection data were used to identify signs of deterioration on surface of the bridge deck such as cracking, concrete leaching, and reinforcement corrosion. Ground penetrating radar data were used to determine the relative condition of the bridge deck. However, due to the …

Developing Computational Models For Pulsed-Inductive Plasma Formation, Zachary Aaron Gill

Masters Theses

"Pulsed-inductive discharges are a common method of producing a plasma. They provide a mechanism for quickly and efficiently generating a large volume of plasma for rapid use and are seen in applications including propulsion, fusion power, and high-power lasers. However, some common designs see a delayed response time due to the plasma forming when the magnitude of the magnetic field in the device is at a minimum. New designs are difficult to evaluate due to the amount of time needed to construct a new geometry and the high monetary cost of changing the power generation circuit. To more quickly evaluate …

Imaging The Subsurface In Eastern Part Of Lake Chesterfield Using A Combination Of Geophysical Tools, Jiawei Li

Masters Theses

"The Lake Chesterfield North Dam in Wildwood city, Missouri has been leaking, more or less continuously since the dam was constructed in 1986 despite mitigation efforts in 1988, 1994, 1995, 2004, and 2005. Neither the grouting efforts in 1988, 1994, 1995, 2004 or 2005, nor the placement and rehabilitation of an impervious clay liner in 2005 has solved the problem. Indeed, in June of 2017, the water level in Lake Chesterfield dropped at an alarmingly rapid rate.

Prior to authorizing additional mitigation work, the Lake Chesterfield Home Owners Association (LCHOA) decided to acquire geophysical data across the dry lake bed. …

Research And Development Of Optically Transparent Join With Low Processing Temperatures, Eric Kevin Muskovin

Masters Theses

The purpose of this study was to investigate durable solar cell cover glass joins produced by diffusion bonding with deep eutectic solvents (DES) and to develop a novel process of joining optically transparent materials at low temperatures. A joined PV cell-glass specimen was characterized using Raman, μ-FTIR, SEM-EDS, and thin-film XRD. DESs were created with malonic acid (MAL) and choline chloride (ChCl) of varying composition factors (CF; CF=MAL/ChCl). Joining borosilicate glass coupons was attempted using DESs with CF = 0.65 and 1 at temperatures between 100-150 °C for 20 hours. Joining the glass coupons failed at all temperatures and oxygen …

Conical Folds -- An Artifact Of Using Simple Geometric Shapes To Describe A Complex Geologic Structure, Avery Joseph Welker

Masters Theses

"Accurate representation of the 3D shapes of natural folds is essential to characterization of the dynamic models for fold formation. Geometrical analysis of folds commonly relies upon analyzing patterns defined by the variation in the orientation of poles to planar surfaces deformed by a shortening event when plotted using graphical calculators (e.g., stereogram, polar tangent diagrams) to interpret the shape of folds. Stereograms for which orientation data define small circles are classified as non-cylindrical regular folds and are interpreted as "conical folds," where the shape of the fold is represented by a cone that terminates at a point. Utilizing similar …

Numerical Modeling Of Capillary-Driven Flow In Open Microchannels: An Implication Of Optimized Wicking Fabric Design, Mehrad Gholizadeh Ansari

Masters Theses

"The use of microfluidics to transfer fluids without applying any exterior energy source is a promising technology in different fields of science and engineering due to their compactness, simplicity and cost-effective design. In geotechnical engineering, to increase the soil's strength, hydrophilic wicking fibers as type of microfluidics have been employed to transport and drain water out of soil spontaneously by taking advantage of natural capillary force without using any pumps or other auxiliary devices. The objective of this study is to understand the scientific mechanisms of the capability for wicking fiber to drain both gravity and capillary water out of …

Evaluating Microgrid Effectiveness In Transitioning Energy Portfolios, Jacob Marshal Hale

Masters Theses

"Microgrid energy systems have emerged as a potential solution to rising greenhouse gas emissions from dependence on fossil fuels. This research provides a framework for evaluating the utility of microgrids. Three key findings are presented: use of a state-of-the-art matrix (SAM) analysis to identify gaps in key research areas that inhibit wide-spread microgrid adoption, development of a system dynamics (SD) model, and a cost benefit analysis case study to evaluate microgrid feasibility in partially meeting the energy demand of a building. Governments play a central role in developing clean energy strategies. A SAM was developed to determine if key microgrid …

Analyzing Sensor Based Human Activity Data Using Time Series Segmentation To Determine Sleep Duration, Yogesh Deepak Lad

Masters Theses

"Sleep is the most important thing to rest our brain and body. A lack of sleep has adverse effects on overall personal health and may lead to a variety of health disorders. According to Data from the Center for disease control and prevention in the United States of America, there is a formidable increase in the number of people suffering from sleep disorders like insomnia, sleep apnea, hypersomnia and many more. Sleep disorders can be avoided by assessing an individual's activity over a period of time to determine the sleep pattern and duration. The sleep pattern and duration can be …

Precise Energy Efficient Scheduling Of Mixed-Criticality Tasks & Sustainable Mixed-Criticality Scheduling, Sai Sruti

Masters Theses

"In this thesis, the imprecise mixed-criticality model (IMC) is extended to precise scheduling of tasks, and integrated with the dynamic voltage and frequency scaling (DVFS) technique to enable energy minimization. The challenge in precise scheduling of MC systems is to simultaneously guarantee the timing correctness for all tasks, hi and lo, under both pessimistic and optimistic (less pessimistic) assumptions. To the best of knowledge this is the first work to address the integration of DVFS energy conserving techniques with precise scheduling of lo-tasks of the MC model.

In this thesis, the utilization based schedulability tests and sufficient conditions for such …

Multiscale Approaches Toward Advanced Lithium-Ion Battery: From Nano To Meso Scale, Susmita Sarkar

Masters Theses

“Battery performance and its degradation are determined by various aspects such as the transport of ions and electrons through heterogeneous internal structures composed of constituent particles, kinetic reactions at the interfaces, and a corresponding interplay between mechanical, chemical, and thermal responses. Further, modern battery materials require a variety of engineering processes such as coating, doping and mixing. As a result, in order to fully understand the behavior of the battery material and improve battery performance, it is necessary to understand and control the individual particle behavior and then connect it to the electrode. This study elucidated the physical phenomena associated …