Engineering Commons^™

Integrated Sensor Network For Monitoring Steel Corrosion In Concrete Structures, José Enrique Ramón-Zamora, José Manuel Gandia-Romero, Román Bataller, Ana Martínez-Ibernón, Isabel Gasch, Juan Soto

International Conference on Durability of Concrete Structures

The developed Integrated Sensor Network (ISN) allows a non-destructive monitoring of the rebar condition at different parts of the structure. The corrosion sensor allows the accurate determination of the corrosion rate (µm/year). Moreover, additional sensors are integrated in order to detect relevant changes in the concrete electrochemical condition.

The ISN has been published as an international invention patent (reference number WO 2016/177929 A1). The system is based on an economic, simple, reliable and durable technology, which makes its implementation viable on new and repaired reinforced concrete structures (RCS). Therefore, it is also possible monitoring non-accessible parts such as deep foundations …

Micro-Mechanical Analysis Of Corrosion Products Formed During Long-Term Carbonation Induced Corrosion Of Steel, Marijana Serdar, Dubravka Bjegovic, Valérie L’Hostis, Stéphane Poyet, Damien Féron

International Conference on Durability of Concrete Structures

During corrosion distinct types of corrosion products form, composed of different ratios of ferrous ions and oxide, hydroxides. Corrosion products have different physical and mechanical properties, mainly density, resistivity, volume and modulus of elasticity compared to iron. Knowing properties of corrosion products is indispensable for service life modelling of structures and can give valuable insight into the long-term corrosion propagation process. In this study micro-indentation method was used to evaluate mechanical properties of different layers formed during long-term carbonation induced corrosion of steel in concrete. Investigation was performed on three sets of reinforced concrete samples, that underwent corrosion during 50, …

Comparison Data Between Hybrid And Galvanic Anode Installation In The Arousa Island Bridge, José Antonio Becerra Mosquera, Diego Carro López, José Enrique Pardo Landrove, José Manuel Millán Pérez

International Conference on Durability of Concrete Structures

The Arousa Island Bridge, with its 1980 m is the only road access to the Arousa Island. Built in 1985, this single-cell box girder divided in 40 spans runs entirely on the sea. The deck is between 2 to 12 m above sea level, so after 25 years in a marine environment, the structure showed reinforcement corrosion, especially in piles and deck bottom. Attending to the corrosion damages, caused simply from a chloride attack, the local government decided to intervene with an ambitious repair project. This decision has been taken only after an exhaustive cost analysis to determine the feasibility …

Effect Of Time-Dependent Chloride Profile And Temperature Variation On Chloride Diffusion In Concrete, Feras Alsheet, A. Ghani Razaqpur

International Conference on Durability of Concrete Structures

Reinforcement corrosion due to chlorides diffusion is one of the main problems in reinforced concrete structures exposed to certain environments. The diffusion rate is function of chloride surface concentration, concrete temperature, humidity, composition and microstructure. The intruded chlorides are partially chemically bound by the concrete and it is the unbound or free chloride which upon exceeding a defined threshold initiates corrosion. The time to corrosion initiation depends on the above variables; therefore, it is important to model their spatial and temporal variations in a manner that will yield a realistic estimate of the actual initiation period. In this study, the …

Durability Design Of Segmental Linings For Intended Service Life Of Tunnels, Mehdi Bakhshi, Verya Nasri

International Conference on Durability of Concrete Structures

In one-pass lining systems, the durability of tunnel structure is directly related to durability of concrete segments acting as both the initial support and the tunnel final lining. In this paper, most-frequent degradation mechanisms of concrete linings are discussed including chloride- and carbonation- induced corrosions, sulfate, acid and freeze-and-thaw attacks, and alkali-aggregate reactions. Mitigation method for each specific degradation mechanism is explained. A durability factor specific to railway and subway tunnel known as stray current corrosion is presented. Mitigation methods for this specific corrosion together with coupling effects with other conventional damage mechanisms are explained. Prescriptive approaches for durability design …

Load-Bearing Capacity Of Corroded Reinforced Concrete Structures Caused By Carbonation And Exposed To Xc4, Esko Sistonen

International Conference on Durability of Concrete Structures

Concrete corrosion can be visualized as a combination of chemical reaction on concrete and electrochemical reaction on steel reinforcement. Failure of steel reinforcement due to corrosion can inflict significant stress on concrete during load distribution. As such, it is necessary to analyse the long-term effects of corrosion on the load bearing capacity and bending strength of steel reinforcement. This research investigated the mechanical and electrochemical properties of concrete exposed to long-term corrosion for a period of 16 years. Non-destructive testing like crack width measurements, visual examination, electrochemical measurements using Galva Pulse and determination of average chloride content were undertaken to …

Sustainable Concrete With Seawater And Corrosion Resistant Reinforcement: Results Of Monitoring Of Corrosion Behaviour, Elena Redaelli, Maddalena Carsana, Federica Lollini, Matteo Gastaldi, Forood Torabian Isfahani

International Conference on Durability of Concrete Structures

The use of seawater for mixing concrete for reinforced concrete structures is prohibited, since it can promote steel corrosion. However, the use of seawater would contribute to decrease the environmental impact of concrete, in particular in those regions of the world where potable water is a precious resource. The project SEACON-INFRAVATION between University of Miami and Politecnico di Milano, with various industrial partners, aims at investigating the use of seawater for the construction of sustainable and durable reinforced concrete structures and infrastructures. Within the project, that included a vast campaign of laboratory tests, also two demo projects – one in …

Climate Resilient Concrete Structures In Marine Environment Of Bangladesh, Sudarshan Srinivasan, Ian Gibb

International Conference on Durability of Concrete Structures

Bangladesh has a vast coastal infrastructure seriously affected by climate change and associated extreme environmental conditions. The rural construction sector in Bangladesh will be undergoing rapid growth in the next 10 years through rural infrastructure development programmes funded by the Asian Development Bank and the World Bank. The Local Government Engineering Department (LGED in Bangladesh), owns the rural concrete infrastructure, maintains around 380, 000 linear metres of concrete bridges or culverts in the rural coastal areas and are planning to build more than 200,000 linear metres during the next ten years. In order to design and construct durable concrete structures …

The Performance Of Concrete In A Marine Environment, Michael D. Thomas, Edward G. Moffatt

International Conference on Durability of Concrete Structures

This paper presents a summary of data from wide range of concretes following periods of marine exposure ranging up to 25 years. Data are presented from more than 100 different concrete mixtures. The various types of concrete include fibre-reinforced concrete (FRC), ultra-high performance concrete (UHPC), concrete with a range of supplementary cementing materials (SCM such as fly ash, slag, and silica fume) and replacement levels (e.g. up to 58% fly ash and 80% slag), lightweight-aggregate concrete (LWAC) and concrete containing alkali-silica reactive aggregate. Testing included measuring chloride concentration profiles, electrochemical corrosion measurements (for steel-reinforced concrete), and various electrical and mechanical …