Engineering Commons^™

Modeling Vibration Stiffness: An Analytical Extension Of Hertzian Theory For Angular Contact Bearings With A Thin Viscoelastic Coating, Davis R. Burton

Honors Theses

This thesis considers the novel angular contact rolling-element bearings proposed by NASA’s Glenn Research Center, which are coated with a thin solid lubricant that exhibits viscoelastic behavior. Current analytical models for the dynamic stiffness matrix of angular contact bearings, critical for vibration analysis, lack the ability to model the effects of a solid coating, as well as the time dependencies inherent in viscoelastic theory. The author first presents an overview of the stiffness matrix derivation, followed by a treatment of the underlying Hertzian contact theory. An analytical extension of this theory is proposed which accounts for a thin elastic layer …

Emotional Experiences Of Black U.S. Computer Science And Engineering Students Amid Faculty-Student Interactions, Kyle Shanachilubwa

Honors Theses

Black students encounter unique challenges in computer science and engineering education. Chief among these is a disconnect with faculty due to a lack of mentorship and difficulties in interactions with faculty. Despite these challenges, Black students bring many engineering and computer science assets. This study aims to understand the emotional experiences of Black students in computer science and engineering education. We present an interpretative phenomenological analysis (IPA) to answer the questions: (1) How do Black students experience faculty-student interactions in computer science and engineering education? (2) How do Black students experience professional shame in these interactions? To answer these research …

Side Channel Detection Of Pc Rootkits Using Nonlinear Phase Space, Rebecca Clark

Honors Theses

Cyberattacks are increasing in size and scope yearly, and the most effective and common means of attack is through malicious software executed on target devices of interest. Malware threats vary widely in terms of behavior and impact and, thus, effective methods of detection are constantly being sought from the academic research community to offset both volume and complexity. Rootkits are malware that represent a highly feared threat because they can change operating system integrity and alter otherwise normally functioning software. Although normal methods of detection that are based on signatures of known malware code are the standard line of defense, …

The Precedence-Constrained Quadratic Knapsack Problem, Changkun Guan

Honors Theses

This thesis investigates the previously unstudied Precedence-Constrained Quadratic Knapsack Problem (PC-QKP), an NP-hard nonlinear combinatorial optimization problem. The PC-QKP is a variation of the traditional Knapsack Problem (KP) that introduces several additional complexities. By developing custom exact and approximate solution methods, and testing these on a wide range of carefully structured PC-QKP problem instances, we seek to identify and understand patterns that make some cases easier or harder to solve than others. The findings aim to help develop better strategies for solving this and similar problems in the future.

Computationally Modeling The Human-Structure Interaction Response Of An Occupied Cantilevered Structure, Brennan Smith

Honors Theses

There is a limited understanding of the impact that passive human occupants have on a dynamic structural system, referred to as Human-Structure Interaction (HSI). Cantilevers are naturally prone to excessive vibrations due to their long unsupported spans, and cantilevered structures such as those commonly found in the seating area of a stadium facility or concert hall are designed to support a high density of occupancy.

This study determined that HSI in cantilevered structures can be modeled using a simple two-degree-of-freedom system. The results of the model were validated by data that was collected on a small-scale laboratory structure intentionally designed …

Experimental Evaluation Of Mesh Size In Physically Crosslinked Polymer Gels Using Dynamic Light Scattering, Duncan M. Hill

Honors Theses

Block copolymer gels are under consideration as drug delivery patches. Controlling and modeling the transport inside the gel is an important contribution to the successful delivery of pharmaceuticals. The diffusive transport of a solute – such as a therapeutic compound – within the gel can be described by the mesh size of the gel, which is defined as the distance between polymer chains. Existing experimental evaluations of mesh size do not work for block copolymer gels due to differences in the fundamental gel structure. As such, an experimental method of measuring mesh size of block copolymer gels using dynamic light …

Monitoring Aerosols With Time Resolution With A Rotating Drum Sampler Using La-Icpms For Elemental Analysis, John V. Piorkowski

Honors Theses

This thesis presents a comprehensive study on the characterization and application of a rotating drum sampler for air quality monitoring, with a focus on aerosol composition analysis using Laser Ablation Inductively Coupled Plasma Mass Spectrometry (LA-ICPMS). The study aimed to determine (1) the cut-off points of the drum sampler to better understand its performance characteristics and (2) to investigate indoor air quality, specifically within makerspaces on Bucknell University’s campus. The research highlighted the novelty of applying LA-ICPMS for time-resolved aerosol composition analysis, demonstrating the potential for low-cost pollution concentration studies. The characterization experiments did not yield expected results, but the …

The Influence Of Aviation Technology On Human Complacency, Aurora Burton

Honors Theses

The thesis covers automation complacency in the aviation industry. The purpose being to provide a foundation of complacency-related accidents to support or dismiss the Federal Aviation Administration’s claim to automation-induced inattention. Complacency factors are outlined in a multitude of fields, creating a background for aviation discussion. To outline the parameters of literature review, behaviors associated with complacency are addressed. Next, a compilation of accident reports is examined and categorized. Specific, impactful accidents relating to complacency are detailed and explained. Summarily, three solutions to human-driven complacency are proposed, evaluated, and analyzed. Including the following: proficiency advancement, technology improvement, and change in …

Ensuring Non-Repudiation In Long-Distance Constrained Devices, Ethan Blum

Honors Theses

Satellite communication is essential for the exploration and study of space. Satellites allow communications with many devices and systems residing in space and on the surface of celestial bodies from ground stations on Earth. However, with the rise of Ground Station as a Service (GsaaS), the ability to efficiently send action commands to distant satellites must ensure non-repudiation such that an attacker is unable to send malicious commands to distant satellites. Distant satellites are also constrained devices and rely on limited power, meaning security on these devices is minimal. Therefore, this study attempted to propose a novel algorithm to allow …

The Biological Activity Of Dual-Responsive Glycopolymers For Intracellular Codelivery Of Antigen And Lipophilic Adjuvant, Micaela Shields

Honors Theses

Subunit vaccines present themselves as an attractive alternative to traditional approaches to vaccines, which utilizes whole organisms to trigger an immune response. While these traditional approaches have proven themselves reliable within the history of vaccinations, they generally deliver subpar robust cellular-mediated immunity and pose many safety risks. Composed of proteins and /or peptides, subunit vaccines are safer and more precise alternatives to traditional approaches. However, the pharmacokinetic properties of the macromolecules that make up these vaccines hinder the subunit vaccine’s level of immunogenicity [d1] Examples of this hindrance include but are not limited to aggregation at the injection site and …

Identifying Key Activity Indicators In Rats' Neuronal Data Using Lasso Regularized Logistic Regression, Avery Woods

Honors Theses

This thesis aims to identify timestamps of rats’ neuronal activity that best determine behavior using a machine learning model. Neuronal data is a complex and high-dimensional dataset, and identifying the most informative features is crucial for understanding the underlying neuronal processes. The Lasso regularization technique is employed to select the most relevant features of the data to the model’s prediction. The results of this study provide insights into the key activity indicators that are associated with specific behaviors or cognitive processes in rats, as well as the effect that stress can have on neuronal activity and behavior. Ultimately, it was …

The Use Of Scattering Cancellation To Cloak And Decouple Slot Antennas And Antenna Arrays, Daniel Ferro

Honors Theses

The concept of cloaking has been prevalent in emerging research, being able to hide oneself completely from outside observers would be a huge benefit for covert surveillance and other fields. This idea has expanded past optical invisibility into the field of electromagnetic invisibility. To accomplish this form of cloaking, a non-natural material, called metamaterials, must be used. Furthermore, metamaterials can be used in a variety of different techniques including transformation-based cloaking, transmission line cloaking, and scattering cancellation cloaking. One application of cloaking is to use scattering cancellation to decouple two antennas that are placed too closely together such as in …

The Effects Of Differing Light Wavelengths And Gravity On, Reese Chesshir

Honors Theses

Physarum is a slime mold in the class of Mycetozoan and the family of Physaraceae. It is a single cellular, multinuclear organism that is not classified as an animal, plant, or fungi. Physarum growth for long-term space travel would be beneficial because it is a decomposer and is able to break down material and waste to recycle. This is important for transferring energy and allowing other organisms to grow. The purpose of this experiment is to study the effect of different light wavelengths and the influence of gravity on Physarum growth patterns.

Evaluation Of The Geotechnical And Foundation Components On Jud Site, Mirabel W. Nkanor

Honors Theses

This thesis is part of the senior design final project of the Civil Engineering Department at the University of Mississippi. Geotechnical and foundation analyses were done on a proposed construction project for a multi-family home in Orlando, Florida. This evaluation done in this thesis follows the pre-existing geotechnical report on the side, USDA soil reports, ASCE Code 32-01 (Design of Foundations), and ASCE-7 Section 12.31.1 (Foundations and Superstructure-to-Foundation Connections).

A structural system was selected from the proposed location, on the corner of South Conway and Judge Road, and an evaluation of the Bearing Load capacity was completed to determine the …

Optimization Of A Fluidized Bed Reactor For The Production Of Acetone From Isopropyl Alcohol, Andrew Rawls Wasson

Honors Theses

For the optimization of the isopropyl alcohol to acetone process, Unit 1100, the Net Present Value (NPV) was used as the objective function to observe the economic impact of each of the optimization factors being tested. During the optimization process, it is not only important to optimize the process’s profitability but also to ensure that the process operates efficiently and meets product specifications. The goal of this optimization was to alter variables from the base case calculations of Unit 1100 to maximize the NPV of the unit. AVEVA ProII software was used to simulate the process and make changes to …

Pour-Over Coffee Stand With Warmer, Francesca Patawaran

Honors Theses

This project sought to demonstrate the process of bringing a new product into the market, from the initial design and prototyping stage to marketing and, ultimately, mass production. As part of the curriculum of The Haley Barbour Center for Manufacturing Excellence (CME), the project team manufactured fifteen Pour-Over Coffee Stands with electric heating components. We first created a 3D model of the proposed design, ensuring that all components fit together in an assembly. Next, we worked with the lab technicians to create a prototype of the product. Then, we refined the manufacturing process to eliminate waste where possible. Throughout the …

The Antler: The Design And Development Of An Independent Shower Support Stand For Those Living With Lower Extremity Limb Loss, Kylie Wright

Honors Theses

While we do not often think about it, taking a shower is a privilege. Standing in the hot water, cleaning off after a long day outdoors, and taking a moment to simply relax is an experience that most people in the U.S. have participated in. However, about 1.4 million Americans do not have this luxury3. Lower extremity amputees have long been advised to shower while seated for their safety. This population is unable to experience the simple independence that accompanies standing in the shower. Despite the growing rate of amputations each year, no products are currently available on the market …

An Investigation Into The Common Problems Of Lagoon Wastewater Treatment In Kentucky, Kaylee A. Jones

Honors Theses

Lagoon wastewater treatment systems are commonly used in areas that do not have the available resources for typical mechanical wastewater treatment. Lagoon systems consist of multiple preliminary lagoons, but mainly rely on long-term facultative lagoons for most analyte removal. In this study, one particular lagoon wastewater treatment system (named Municipality A Wastewater Treatment Plant) is investigated due to noncompliance with governmental standards provided by the National Pollutant Discharge Elimination System (NPDES). Samples were collected by researchers at 4 different instances inside of the treatment systems. These samples were sent to an analytical laboratory for testing. The readings from these samples …

Development Of Novel Sensor Coating Methodology To Enable Understanding Of Fouling Mechanisms On Ion Exchange Membranes, Andrew Ulmer

Honors Theses

As populations expand and natural water resources are depleted, severe droughts and limited access to clean water have become an increased threat to areas across the world. Effective and economic water treatment methods such as electrodialysis (ED) are vital for combating these threats, especially in developing nations and secluded locations. Organic foulant adsorption on the surface of ion exchange membranes severely limits the capabilities of water desalination systems such as ED along with significantly increasing maintenance costs. Understanding characteristics such as the total amount and rate at which these foulants at specific concentrations adsorb and desorb to the membranes is …

An Analysis Of The Production Of Pharmaceutical-Grade Acetone Via The Dehydrogenation Of Isopropanol (Ipa), Jordan Desplas

Honors Theses

The production of 99.9 wt% acetone from isopropanol in Unit 1100 is designed to start up in 2025 and operate for 12 years after startup. The engineering team was tasked with designing the process, creating an economic model, and optimizing the net present value (NPV). The process was simulated in AVEVA PRO/II Simulation for the design process, and the economic analysis was estimated in Microsoft Excel. Parametric and topological optimization was performed linearly on the unit operations in the process. The NPV was improved by $14M from a base case of $122M to an optimized case of $136M. The project …

Crafting Comfort: The Design And Production Of A High-End Poolside Lounge Chair, John Hollis Tackett, Robert Griffis

Honors Theses

This report focuses on the development, design, and manufacturing of the Adjustable Lounge Chair, a high-end poolside lounge chair created to address un-met customer demand in the market. The investigation began with a market analysis to identify sought-after features not currently offered by competitors' products. This analysis drove the design of the chair, which was developed using CAD software, followed by the construction of a physical prototype to validate the concept.

The chair's innovative features include adjustable lumbar support and chair height, as well as a removable face-piece that enables users to comfortably lie prone without straining their necks. These …

The Engineering Challenges Of Designing And Manufacturing A Tensegrity Cup Stand, Yaniv Goulet, Daniel Ferro

Honors Theses

Progressing from a simple idea into a fully developed product is one of the main goals of any engineer. Through Haley Barbour Center for Manufacturing Excellence’s capstone program, the team was tasked with realizing a tensegrity cup stand. The tensegrity structure consists of a top and a bottom of some form only supporting itself by tension. The team had to research the concept, create an initial design, create a prototype of the product, improve the design after the prototype’s mistakes, apply lean principles to improve the manufacturing efficiency, and analyze all the economic impacts of the engineering decisions. In the …

The Design Estimate Of A Warehouse Refrigeration System, Jackson Dear

Honors Theses

The intention of this project was to provide a design and cost estimate for the refrigeration systems within an industrial cold storage distribution center for Magnolia Country Frozen Foods, Inc. in East Rutherford, NJ. The facility includes eighteen 300,000 ft3 units (200 ft x 100 ft x 15 ft). These units require 200 tons of refrigeration at a maintained temperature of 0oF. This project's scope included choosing an optimal refrigeration system, selecting a refrigerant for use within the system, and providing a cost estimate for the purchase of the refrigeration system equipment and for the yearly cost associated with running …

Redesigning Nasogastric Feeding Tubes To Prevent Dislodgement, Sydney Ruth Rester, Shelby Lynn Berry

Honors Theses

Seniors at the University of Mississippi studying biomedical engineering complete a senior project that seeks to solve a problem in healthcare. Our team, composed of Sydney Rester, Shelby Berry, Andrew Ulmer, and Alex Bromley, sought to improve care associated with nasogastric feeding tubes. We identified two major problems: clogging and tube dislodgement. To address the problem of dislodgement, the team crafted a new feeding tube design with a balloon attachment. The attachment prevents a patient from pulling the feeding tube out and keeps the tube from dislodging due to normal patient movement. We further determined that our tube should be …

Redesigning Nasogastric Feeding Tubes To Prevent Dislodgement, Shelby Lynn Berry, Sydney Ruth Rester

Honors Theses

Seniors at the University of Mississippi studying biomedical engineering complete a senior project that seeks to solve a problem in healthcare. Our team, composed of Sydney Rester, Shelby Berry, Andrew Ulmer, and Alex Bromley, sought to improve care associated with nasogastric feeding tubes. We identified two major problems: clogging and tube dislodgement. To address the problem of dislodgement, the team crafted a new feeding tube design with a balloon attachment. The attachment prevents a patient from pulling the feeding tube out and keeps the tube from dislodging due to normal patient movement. We further determined that our tube should be …

Formulation And Optimization Of Algae-Filled Polylactic Acid Thermoplastic Compounds For Improved Biodegradation, Sydney A. Cole

Honors Theses

Conventional plastics derived from non-renewable petrochemicals – especially from fossil reserves – have become an integral part of human life because their structure can be chemically manipulated to obtain a wide range of properties and geometries necessary in nearly all industries. The volume and rate at which petroleum plastics are produced, used, and discarded has incited several significant issues related to human health, environmental conservation, and ecological biodiversity. To address these issues, many institutions have begun investigating solutions in both the development and end-oflife phases of plastic production and waste. In this thesis, a Chlorella-dominated algae mixture is dried and …

The Effects Of Social Media On Mental Health And Career Planning, Spencer A. Rowan

Honors Theses

Social media use is prevalent and necessary in society—nearly anything can be accomplished with a mobile device or smartphone. Among the US population, two thirds of American adults admit to using social media (Perrin, 2015) and in 2022, Georgiev (2023) found Americans spent an average of two and a half hours daily on social media. Furthermore, social media use is tied to mental well-being, work confidence levels, and feelings of being an imposter (Johnson et al., 2020; Uram & Skalski, 2022; Hernandez & Chalk, 2021; Myers, 2021; Ramm, 2019).

This project examined the role of social media use among college …

Investigating Myosin Ensemble Force Generation Using Optical Tweezers, Janie Watts

Honors Theses

Myosin is a motor protein that facilitates muscle contraction and movement by stepping along actin filaments using energy from ATP hydrolysis. If myosin or other motors are disrupted throughout the body, it can have many harmful effects. Hypertrophic cardiomyopathy is a disease caused by gene mutations that affect myosin heavy chains in the heart. The tissue of the heart becomes abnormally thick, which can make it more difficult to pump blood or block blood flow out of the heart. Our goal is to discern the mechanistic difference function of a healthy and diseased heart. To accomplish this, we construct model …

Aviation Mentorship Program, Joseph Zynda

Honors Theses

The Aviation COR Mentorship program is a test for efficacy of a mentorship program for Western Michigan University’s College of Aviation. This paper describes what the mentorship program is and the values it is founded on. The description will break down each Core Value (these are renamed to Core Principles in the “Facilitating Improvements” section). The paper then dives into the criteria for being a mentor or mentee and the schedule of the test program. The goals are then outlined for this initial program in a chart. There are five goals for the program to assist students with the transition …

Mental Health In Aviation: A Study Of Aviation Students On Their Perceptions Of The Federal Aviation Administration’S Rules Governing Mental Health, Laila Stein

Honors Theses

This study aims to understand collegiate aviation students, faculty, staff, and flight instructors’ perceptions of the Federal Aviation Administration’s (FAA) regulations governing mental health assistance. It also aims to examine the impact of the perceptions held by students, faculty, staff, and flight instructors regarding their desire to seek mental health assistance. A study at Western Michigan University’s (WMU) College of Aviation (COA) was developed to test the hypothesis that students, faculty, staff, and flight instructors had a restrictive perception of the FAA rules regarding seeking mental health assistance, and that students, faculty, staff, and flight instructors had lower desire to …