Open Access. Powered by Scholars. Published by Universities.®

Engineering Commons

Open Access. Powered by Scholars. Published by Universities.®

Articles 1 - 17 of 17

Full-Text Articles in Engineering

Synthesis, Crystal Structure And Ionic Conductivity Of Ruddlesden-Popper Oxide Materials: Effects Of Ionic Radii And Defects On Lithium-Ionic Conductivity., Selorm Joy Fanah Dec 2021

Synthesis, Crystal Structure And Ionic Conductivity Of Ruddlesden-Popper Oxide Materials: Effects Of Ionic Radii And Defects On Lithium-Ionic Conductivity., Selorm Joy Fanah

Electronic Theses and Dissertations

Layered perovskite oxides of the Ruddlesden-Popper (RP) type structure can be good lithium-ion conductors for solid electrolyte applications in all-solid-state batteries, due to the large gap separating octahedral layers which can be useful pathways for Li-ion conduction. However, little work has been done on their lithium-ion transport properties in these materials despite their interesting structural properties. This work highlights the synthesis and study of the ionic conductivities in a series of n = 2 and 3 Ruddlesden-Popper oxides, as part of an ongoing investigation in search of alternative solid electrolyte materials. Several different strategies were employed for the enhancement of …


Towards Long Term Colloid Suspension In A Vertically Rotated System., Md Mahmudur Rahman Dec 2021

Towards Long Term Colloid Suspension In A Vertically Rotated System., Md Mahmudur Rahman

Electronic Theses and Dissertations

Within a colloidal suspension gravity may compromise the observation of governing physical interactions, especially those that are weak and/or take significant time to develop. Conducting the experiment in a long-term microgravity environment is a viable option to negate gravitational effects, though significant resources are required to do so. While it may not be possible to simulate long-term microgravity terrestrially, particles can resist quick sedimentation in a confined suspension system rotating vertically with appropriate rotation speed. The goal of the investigation is to demonstrate the existence of long-term particle suspension regime for a certain colloidal suspension while characterizing colloidal behavior due …


Scalable Synthesis Of Alumina Nanowires By Wet Chemical Method., Luis N Moreno Dec 2021

Scalable Synthesis Of Alumina Nanowires By Wet Chemical Method., Luis N Moreno

Electronic Theses and Dissertations

To satisfy an increasing demand for large-scale processes for producing alumina nanomaterials, a wet chemical method was evaluated. A potassium salt precursor was combined with aluminum to produce alumina – based nanowires. Compared with current methods such as thermal oxidation, sol-gel, and laser ablation, this method is highly scalable due to relatively low energy requirements and the ability to carry out the primary reaction under ambient conditions. The nanowire samples were evaluated using SEM, XRD, BET, and TEM to confirm morphology, phases present, and surface area. A porous nanowire structure was confirmed which has a BET surface area of 324.6 …


An Introductory Study Of Coal Fly Ash Enhancement For Heavy Metal Removal In Wastewater Treatment., Samuel T. Romes Dec 2021

An Introductory Study Of Coal Fly Ash Enhancement For Heavy Metal Removal In Wastewater Treatment., Samuel T. Romes

Electronic Theses and Dissertations

Coal Combustion Products are the materials that remain after pulverized coal is burned to generate electricity. The fine portion, fly ash, has many re-use capabilities across various industries. Most recent data shows that approximately 60% of fly ash produced in the United States was used with the largest re-use being concrete additives. This work aims to enhance fly ash via hydrothermal treatment in order to expand the re-use capabilities of the material. These materials were tested as adsorbents for heavy metal removal from wastewater samples. The metals tested for removal were Copper (II) Acetate, Cadmium Chloride, Boric Acid, Sodium Selenite, …


Solvent Engineering Of Molybdenum Disulfide Electrocatalyst For Hydrogen Evolution., Robert Carl Spalding Dec 2021

Solvent Engineering Of Molybdenum Disulfide Electrocatalyst For Hydrogen Evolution., Robert Carl Spalding

Electronic Theses and Dissertations

Energy is at an exponentially growing demand, and to keep up with these demands new technologies for renewable energy have received increased attention. Hydrogen plays a vital role in water electrolysis and fuel cells, as the hydrogen evolution reaction (HER) is the main step water splitting process. Most of the current electrocatalysts for HER are dominated by platinum and other precious metals due to their low over-potential and small Tafel slope, however, they are extremely costly. For this reason, cost-effective non-precious metal catalysts must be developed. Transition metal dichalcogenides, such as molybdenum disulfide (MoS2), are abundant and have recently shown …


Aggregation Dynamics Of Bulk Nanoparticle Haloing Systems And The Influence Of Non-Ambient Temperatures., Marzieh Moradi Aug 2021

Aggregation Dynamics Of Bulk Nanoparticle Haloing Systems And The Influence Of Non-Ambient Temperatures., Marzieh Moradi

Electronic Theses and Dissertations

One of the methods of assembling colloids into 3D crystal structures is through the use of nanoparticle haloing. Nanoparticle haloing is a stabilization mechanism in binary particle suspensions possessing both a size and charge asymmetry, with which the nanoparticles aid in the bulk suspension’s stability. By altering the volume fractions of nanoparticles, it is possible to control the effective repulsion between the microparticles. Understanding the colloidal interactions and aggregate crystallinity as a function of nanoparticle concentration, temperature, and time are key challenges in developing future materials and designing crystalized 3D colloidal systems. In this study, we investigated the effect of …


Mixed Metal Oxide Nanowires Via Solid State Alloying., Veerendra Atla Aug 2021

Mixed Metal Oxide Nanowires Via Solid State Alloying., Veerendra Atla

Electronic Theses and Dissertations

Mixed metal oxide materials with composition control find applications in energy conversion and storage processes such as heterogenous catalysis, photoelectrochemical catalysis, electrocatalysis, thermal catalysis, and lithium-ion batteries. Mixed metal oxides and/or complex oxides with composition control and in one-dimensional form as nanowires could be interesting to various catalysis applications due to control on single crystal surfaces, active sites, acidity versus basicity site density, and oxygen vacancies. The major challenge is to synthesize mixed metal oxide nanowires beyond binary oxides with composition control. In this dissertation, solid state alloying of binary oxide nanowires with solid and liquid precursors is studied to …


Wetting And Drying Dynamics For Tio2 With Pbs Quantum Dots., Kelly M. Lee Aug 2021

Wetting And Drying Dynamics For Tio2 With Pbs Quantum Dots., Kelly M. Lee

Electronic Theses and Dissertations

Initial solar cells utilized silicon and alloys for their economic viability. Photoelectrochemical photovoltaic cells were discovered with technological advancement which increased solar efficiency and further improved economic feasibility leading to quantum dot sensitized solar cells. Lead sulfide quantum dots and titanium dioxide were studied for wetting and drying effects. Zeta potential, pH values, SEM, and optical microscopes quantified or observed the colloidal suspension and dried sample behavior. Combined mixtures of lead sulfide and titania were dried at 3.6 pH and 12.56 pH values. This due to the observed zeta potential isoelectric point of titania, and behavior showed increased stability occurring …


The Study Of Copper Corrosion Mechanisms Using Electrochemical Experimental Techniques., Evan Grimm Aug 2021

The Study Of Copper Corrosion Mechanisms Using Electrochemical Experimental Techniques., Evan Grimm

Electronic Theses and Dissertations

The purpose of this study was to discover and thoroughly explain the corrosion mechanisms of copper in saltwater, tap water and deionized water, and to apply these methods and findings when testing the corrosion mechanisms of other materials. The experimental procedure consisted of measuring the open circuit potential, electrochemical impedance spectroscopy, linear sweep voltammetry, and Tafel analysis.

The copper was found to corrode at a greater rate in saltwater, followed by tap water then deionized water, with a larger difference between saltwater and tap water than between tap water and deionized water. Each reaction was found to be both kinetically …


Exploring Meerwein-Ponndorf-Verley Reactions Using Metal Organic Framework Catalysts., Yuehan Zhou Aug 2021

Exploring Meerwein-Ponndorf-Verley Reactions Using Metal Organic Framework Catalysts., Yuehan Zhou

Electronic Theses and Dissertations

The Meerwein–Ponndorf–Verley (MPV) reaction is a reaction that is used to reduce aldehydes and ketones to the corresponding alcohols with the added use of catalysts. The common metal triflate catalysts used in MPV reduction incur tremendous environmental hazards and high operational costs. The use of Metal-Organic Frameworks (MOFs) as catalysts can be an alternative due to MOFs’ extraordinarily high surface areas, ultrahigh porosities, tunable pore sizes, modifiable internal surfaces, and numerous framework structures. Moreover, using MOFs as catalysts for MPV hydrogenation is economically viable due to low operational and material costs. This study involves using MOF-808 (Hf) in the MPV …


Modified Electrode Surfaces With Hydrogen Evolution Reaction Catalysts Derived From Electropolymerized Complexes With Redox Active Ligands., Amanda Mae Arts Aug 2021

Modified Electrode Surfaces With Hydrogen Evolution Reaction Catalysts Derived From Electropolymerized Complexes With Redox Active Ligands., Amanda Mae Arts

Electronic Theses and Dissertations

The demand for energy is growing exponentially, and to keep up with these demands new technologies for renewable energy have received increased attention. Hydrogen is one of the most promising energy sources for the future and plays a vital role in water electrolysis and fuel cells, as the hydrogen evolution reaction (HER) is the main step in the water splitting process. To increase the reaction rate and improve efficiency for the water electrolysis, catalysts are used to minimize the overpotential.

Most of the current electrocatalysts for HER are heterogeneous in nature and are dominated by platinum and other precious metals …


Room Temperature Alkali Treatment Of Rice Straw For Enhanced Enzymatic Hydrolysis., Seth Mains Aug 2021

Room Temperature Alkali Treatment Of Rice Straw For Enhanced Enzymatic Hydrolysis., Seth Mains

Electronic Theses and Dissertations

Due to the pollution of fossil fuels due to greenhouse emissions, researchers continue to search for alternative methods that allow for the clean production of energy, fuels, and polymer fibers. A method currently under investigation is the use of lignocellulosic biomass as a solution to current problems with energy and polymer fiber production. Through the process of pretreatment, possibilities for lignocellulosic biomass expand due to improved accessibility of the cellulose and hemicellulose which can be broken down via enzymatic hydrolysis into C5 and C6 sugars such as xylose and glucose. This study investigated the fermentation of the rice straw into …


Mapping Three Dimensional Interactions Between Biomolecules And Electric Fields., Joseph Patrick Brian P.E. May 2021

Mapping Three Dimensional Interactions Between Biomolecules And Electric Fields., Joseph Patrick Brian P.E.

Electronic Theses and Dissertations

Electroporation is a technique that induces the formation of open pores in cell membranes by the application of an electric field. Electroporation is widely practiced in research and clinical work for transfection of genetic sequences and drug molecule transport through the membrane barrier. However, a full theoretical explanation of the molecular mechanisms and thermodynamics responsible for pore formation, structure, and longevity does not yet exist. Advances in molecular dynamics simulations have enabled theoretical studies of electroporation with previously unobtainable fidelity spanning biologically relevant timescales. All-atom simulations utilizing the recently developed method of computational electrophysiology demonstrate that pore size correlates to …


Predicting Henry's Law Constants Of Volatile Organic Compounds Present In Bourbon Using Molecular Simulations., Christopher A Abney May 2021

Predicting Henry's Law Constants Of Volatile Organic Compounds Present In Bourbon Using Molecular Simulations., Christopher A Abney

Electronic Theses and Dissertations

Henry’s Law describes the partitioning of molecules into liquid and gas phases at low concentrations. Henry’s Law, which is based upon a species-dependent constant and the gas phase partial pressure, is useful for predicting phase behavior of dilute solutes. However, Henry’s Law constants are difficult to measure experimentally or to predict using structure-property or thermodynamic models. Herein, molecular simulations were used to calculate Henry’s Law constants for 18 volatile organic compounds (VOCs) present in bourbon. The novel simulations analyzed solvation thermodynamics of small organic molecules in 120 proof ethanol. A fast-growth non-equilibrium free energy method was used in which the …


Image Analysis Of Charged Bimodal Colloidal Systems In Microgravity., Adam J. Cecil May 2021

Image Analysis Of Charged Bimodal Colloidal Systems In Microgravity., Adam J. Cecil

Electronic Theses and Dissertations

Colloids are suspensions of two or more phases and have been topics of research for advanced, tunable materials for decades. Stabilization of colloids is typically attributed to thermodynamic mechanisms; however, recent studies have identified transport or entropic mechanisms that can potentially stabilize a thermodynamically unstable colloidal system. In this study, suspensions of silsesquioxane microparticles and zirconia nanoparticles were dispersed in a nitric acid solution and allowed to aggregate for 8-12 days in microgravity aboard the International Space Station. The suspensions were subsequently imaged periodically at 2.5x magnification. Due to the inadequacy of existing image analysis programs, the python package “Colloidspy” …


Annealing Of Encapsulated Heavy Metals From Brine Water Utilizing Microwave Enabled Sol-Gel Process, Adam Michael Flynn May 2021

Annealing Of Encapsulated Heavy Metals From Brine Water Utilizing Microwave Enabled Sol-Gel Process, Adam Michael Flynn

Electronic Theses and Dissertations

Various waste encapsulation strategies have been investigated to solidify and stabilize heavy metal wastewater for proper long-term storage. This work aims to enhance a method of novel sol-gel encapsulation of heavy metals from mock brine waters using tetramethyl orthosilicate with the addition of an annealing step at various temperatures in order to reduce leaching of metals from the silica monoliths when exposed to water. The metals tested for encapsulation and leaching were mercury (II) chloride, potassium dichromate, sodium selenite, boric acid, cadmium chloride, and copper (II) acetate. The annealing of the silica monoliths led to an increased degree of for …


Image Analysis Of Colloidal Systems For Pair And Triplet Correlations., Brianna Price Jan 2021

Image Analysis Of Colloidal Systems For Pair And Triplet Correlations., Brianna Price

Electronic Theses and Dissertations

Interactions among colloidal particles drive stability of suspensions or the assembly of particles into larger superstructures such as agglomerates or crystals. Typically, colloidal interactions are modeled using pairwise interaction potential energies which consider the interactions between pairs of particles. However, additional particles can modulate pair potentials, leading models to predict incorrect behavior. To analyze the effects of three-body interactions on the structuring of colloidal systems, pair and triplet correlation functions are calculated from published experimental data. These correlation functions are then translated into empirical pair and triplet potentials of mean force, which are then used to model systems more accurately …