Engineering Commons^™

Numerical Investigation Of Subglottal Stenosis Effects On Human Voice Production, Dariush Bodaghi

Electronic Theses and Dissertations

This dissertation aimed to advance knowledge of how subglottal stenosis impacts voice production physiology. An in-house fluid-structure-acoustic interaction approach based on the hydrodynamic/acoustic splitting technique was employed. This technique was rigorously verified for simulating phonation by matching the acoustic behavior to a compressible flow solver for phonation-relevant geometries. Simulations of an idealized 2D vocal tract model demonstrated the effects of supraglottal acoustic resonance on vocal fold kinematics and glottal flow waveform. Results showed that the acoustic coupling between higher harmonics and formats generated pressure oscillations, modifying vocal fold dynamics and glottal flow rate.

A major novelty was the incorporation and …

Kinematic Analysis Of Gait And Deep Knee Flexion For Pre- And Post-Operative Total Knee Arthroplasty, Samantha Collins

Electronic Theses and Dissertations

Osteoarthritis (OA) is a form of arthritis that develops in the joint due to overuse and aging causing pain, discomfort, and disability. Total Knee Arthroplasty (TKA) is a surgical procedure performed when OA symptoms are severe with an estimated 600,000 patients in the United States currently receiving TKA. Studies have reported dissatisfaction of the knee for 14-39% of patients. This study collected knee kinematics before and after surgery using stereo radiography for precise measurement of gait and deep knee flexion activities. Results showed healthy knee kinematics were not restored and no significant changes could be seen from OA kinematics in …

Exploration Of Motion Capture System To Investigate Human Shoulder Kinematics, Ola Alsaadi

Electronic Theses and Dissertations

The glenohumeral joint (GH) is commonly conceptualized as a ball-and-socket joint [1], and its center of rotation (COR) is presumed to coincide with the geometric center of the medial-superior region of the humeral head [2]. Recent research has endorsed improvements in COR estimation through invasive and noninvasive techniques, including cadaver studies, stereophotogrammetry, and motion capture (MOCAP) systems. Despite increased interest in wearable technology within human movement analysis, the problem of COR estimation employing MOCAP systems and its validation against bi-planar fluoroscopy remains relatively unexplored.

This study employed a marker-based MOCAP system to compare the accuracy, error, and precision of three …

Computational Methodology For Generating Patient-Specific Soft Tissue Representations, Ahilan Anantha Krishnan

Electronic Theses and Dissertations

This dissertation focused on modeling specimen-specific soft tissue structures in the context of joint replacement surgery. The research addressed four key aspects. The first study involved developing a workflow for creating finite element models of the hip capsule to replicate its torque-rotational response. Experimental data from ten cadaveric hips were used to calibrate the models, resulting in improved accuracy and relevance for surgical planning and implant design. The second study tackled the challenge of expediting the calibration of mechanical properties of the hip capsule to match patient-specific laxities. A statistical shape function model was proposed to generate patient-specific finite element …

Digital Twins Of The Living Knee: From Measurements To Model, Thor Erik Andreassen

Electronic Theses and Dissertations

Modern medicine has dramatically improved the lives of many. In orthopaedics, robotic surgery has given clinicians superior accuracy when performing interventions over conventional methods. Nevertheless, while these and many other methods are available to ensure treatments are performed successfully, far fewer methods exist to predict the proper treatment option for a given person. Clinicians are forced to categorize individuals, choosing the best treatment on “average.” However, many individuals differ significantly from the “average” person, for which many of these treatments are designed. Going forward, a method of testing, evaluating, and predicting different treatment options' short- and long-term effects on an …

Exploring The Use Of Audible Sound In Bone Density Diagnostic Devices, Evan J. Bess

Electronic Theses and Dissertations

Osteoporosis is a medical condition in which there is a progressive degradation of bone tissue that correlates with a characteristic decrease in bone density (BD). It is estimated that osteoporosis affects over 200 million people globally and is responsible for 8.9 million fractures annually. Populations at risk for developing osteoporosis include post-menopausal women, diabetic patients, and the elderly, representing a large population within the state of Maine. Current densitometric and sonometric devices used to monitor BD include quantitative computed tomography (QCT), dual-energy x-ray absorption (DXA), and ultrasound (QUS). All methods are expensive and, in the cases of QCT and DXA, …

Characterization Of Mammographic Dense Tissue Sub-Types Using Classification Algorithms On Metric Space Technique Output Functions, Madison Raza

Electronic Theses and Dissertations

In recent years breast cancer has become the leading cause of global cancer incidence. One of the most common forms of screening is through the use of digital x-ray screening mammography. Risk assessment models which help predict a patient’s risk of developing breast cancer rely mainly on patient history and qualitative breast density assessment from screening. The 2D wavelet transform maxima modulus (2D WTMM) method uses a sliding window approach to quantify the spatial organization of underlying mammographic tissue according to Hurst- exponent ranges (H) as fatty (H ≤ 0.45), healthy dense (H ≥ 0.55) and …

Development And Characterization Of Shear Thinning Cnf-Tempo Hydrogels For Use In Aquaculture Vaccines, Jacob A. Holbrook

Electronic Theses and Dissertations

Aquaculture has shown significant growth within the past few decades and is expected to continue expanding rapidly as the global demand for fish consumption continues to increase. A significant loss within the aquaculture industry is due to pathogen transmission within the farm systems. These pathogens are mitigated through various methods that are not cost effective or have limited protection. The most common method of pathogen mitigation is through oil-based injection vaccines as they provide even protection across vaccinated fish and provides the longest protection compared to other vaccination methods. These oil-based injection vaccines are not without their flaws as they …

Designing And Modeling A Fail-Safe Mechanism To Be Used In Attachment Of A Transcutaneous Femoral Implant To A Prosthetic Device, Emma Sperry

Electronic Theses and Dissertations

Amputations are quite common and even modern prosthetic devices are plagued by problems. There are approximately 2 million people living with limb loss in the U.S. and on average 185,000 amputations occur yearly. Common attachment mechanisms for external prosthetic components to a residual limb, that is, sockets, pose numerous challenges. Issues include skin irritation, discomfort, socket fit issues, and immobility. Issues include skin irritation, discomfort, socket fit issues, and immobility. Transcutaneous implants have great potential as a connection method for external prosthetic components to a residual limb but because the implants are typically solid, they correlate to extremely high infection …

Longitudinal Case-Control Study Of Mammographic Breast Tissue Subtypes, Kendra Batchelder

Electronic Theses and Dissertations

Breast density is a known risk factor for breast cancer. However, there has been limited research on potential subtypes of mammographic dense breast tissue to identify areas of active dense tissue that is structurally reorganizing and links to cancer dynamics, versus areas of passive dense tissue which remains organized. We hypothesize that the amounts of subtypes of mammographic dense tissue and the associated rate of change through time could provide insights into breast cancer risk. A retrospective study was conducted to investigate breast cancer using longitudinal screening mammograms and accompanying pathology reports collected in 2015. Patients were matched by age …

Nanocellulose Based Foams For Low-Cost Disposable Medical Applications, Dominic Kugell

Electronic Theses and Dissertations

Polyurethane foams have been a staple material for their use in medical positioners, such as post-surgery elevation pillows as well as specific tailored positioners for their use during surgery. Polyurethane foams are preferred because of their lower cost compared to other petroleum derived foams, their versatility, and suitable mechanical properties. However, the environmental impact, including both cost and perception, of these foams is immense. Therefore, alternatives are being explored with biopolymers emerging as a promising class of materials. Cellulose is one such polymer that has recently demonstrated desirable properties. In this study, cellulose nanofibrils (CNF), a household foaming agent, and …

Analyzing Pseudomonas Aeruginosa With Bacteriophage Tags Using Photoacoustic Flow Cytometry, Jennifer C. Schinke

Electronic Theses and Dissertations

The number of daily bacterial infections is climbing and the CDC explains that this is due to the antibiotic-resistant threat in the United States. Finding a faster way of bacterial identification is necessary as it currently takes 1-4 days for a medical lab to culture and identify bacteria. Photoacoustic flow cytometry (PAFC) can be used as an alternative method resulting in swift identification within an hour (Edgar, 2019). Pseudomonas aeruginosa, cell line PA01, will be coated in up to a few hundred red dyed phages making it detectible by the photoacoustic flow cytometry system. Bacteriophages (phages) are viruses that …

Hemodynamic Assessment Of Y-Incision Aortic Root Enlargement Using Computational Simulations, Astitwa Ghimire

Electronic Theses and Dissertations

The Yang procedure is a new aortic root enlargement technique used to enlarge the aortic annulus by multiple valve sizes. The procedure prevents patient prosthesis mismatch and establishes a viable platform for future valve-in-valve implantation. This study used the Yang procedure to investigate the hemodynamics in the aortic root and bioprosthetic valve regions after aortic root enlargement. Results indicate the velocity magnitude at the sinus regions of a patient who underwent the Yang procedure was slower, indicating risks of flow stasis and thrombosis. Simulation results denote computational models can be created for optimization of surgical procedures.

Investigation Of Possible Inflammatory Response After Ultrasound And Microbubble Procedure In The Spinal Cord., Jenna Wilkerson

Electronic Theses and Dissertations

The purpose of this experiment is to explore the inflammatory effects of focused ultrasound paired with intravenously delivered microbubbles when used in the lumbar spinal cord. There are currently very few pharmaceuticals that can successfully enter the blood spinal cord barrier (BSCB). This technique used at the lumbar enlargement might allow targeted treatment of pathologies involving the spinal cord.

To test the possible inflammatory response of this technique, an animal experiment was performed. 15 animals were given a T12 laminectomy and allowed to fully recover. Once recovered, all animals received FUS+MB at L2 and were euthanized in groups of five …

A Virtual Method For Establishing Femoral Stem Position In Total Hip Arthroplasty, Samuel Mattei

Electronic Theses and Dissertations

Total hip arthroplasty (THA) is one of the most successful orthopedic surgeries performed, in which the hip joint is reconstructed to improve functionality and decrease pain in the joint. Despite the success of these procedures, femoral stem misalignment remains an area that influences THA success. The relationship between the femoral stem geometry and implanted femoral stem size and orientation is underreported due to limitations in the collection of radiographic data used for clinical pre-operative templating. Furthermore, the influence of anatomic measurements on the direction and size of the femoral stem are not considered due to imaging technique and difficulties associated …

Finite Element Modeling Of Patient-Specific Total Shoulder Arthroplasty, Ignacio Rivero Crespo

Electronic Theses and Dissertations

Total Shoulder Arthroplasty (TSA) is a surgical procedure designed to improve joint functionality by replacing the articulation between the humeral head and the glenoid fossa. Anatomic Total Shoulder Arthroplasty (aTSA) and Reverse Total Shoulder Arthroplasty (rTSA) are two types of replacement surgery to relieve pain and restore function of the shoulder. The overall goal of this study was to evaluate the effects of variation of certain patient and implant alignment parameters that may influence long-term outcomes of these surgical procedures, including kinematics, joint loads and contact mechanics. Computational models of six TSA subjects, three aTSA and three rTSA, were created …

Development And Application Of A Microfluidic Platform For Quantifying Intra-Tumoral Compressive Stress., Zachary P. Fowler

Electronic Theses and Dissertations

Cancer progression is linked to the emergence of aberrant mechanical signaling in the tumor microenvironment. Modulation of extrinsic signals, such as ECM stiffness and composition, have been thoroughly explored. However, the development of solid stresses within the tumor remains poorly understood. To address this, we have developed a microfluidic platform that generates deformable alginate microbeads that allow for the quantification of compressive stresses generated within a growing glioblastoma (GBM) tumorsphere. PDMS microfluidic devices were fabricated via SU-8 mold with channels ranging from 10µm-40µm in diameter. Fluorescently labeled sodium alginate underwent a cross-linking reaction within the device to generate monodisperse beads …

Cad System For Early Diagnosis Of Diabetic Retinopathy Based On 3d Extracted Imaging Markers., Ahmed Sleman

Electronic Theses and Dissertations

This dissertation makes significant contributions to the field of ophthalmology, addressing the segmentation of retinal layers and the diagnosis of diabetic retinopathy (DR). The first contribution is a novel 3D segmentation approach that leverages the patientspecific anatomy of retinal layers. This approach demonstrates superior accuracy in segmenting all retinal layers from a 3D retinal image compared to current state-of-the-art methods. It also offers enhanced speed, enabling potential clinical applications. The proposed segmentation approach holds great potential for supporting surgical planning and guidance in retinal procedures such as retinal detachment repair or macular hole closure. Surgeons can benefit from the accurate …

Design And Evaluation Of A Multi-Functional Surgical Device For Microgravity Surgeries., Sienna Shacklette

Electronic Theses and Dissertations

No abstract provided.

Fully Coupled Fluid Structure Interaction Simulation Of Bioprosthetic Heart Valves: A Numerical And Experimental Analysis, Masod Sadipour

Electronic Theses and Dissertations

Aortic stenosis impacts approximately 7% of the global population. In the past decade, the role of computational modeling has been becoming considerably important in the design of BHVs. To obtain reliable solutions in computational modeling, it is essential to consider accurate properties of bioprosthetic heart valves (BHVs), such as density and mechanical properties. Previous computational studies assumed (bovine pericardium) BP used in BHVs density was comparable to water or blood. Yet, BP is subjected to multiple treatments like fixation and anti-calcification. In Chapter 2, I measured BP density and its effect on BHV leaflet stress and strain. In the second …

Patient Movement Monitoring Based On Imu And Deep Learning, Mohsen Sharifi Renani

Electronic Theses and Dissertations

Osteoarthritis (OA) is the leading cause of disability among the aging population in the United States and is frequently treated by replacing deteriorated joints with metal and plastic components. Developing better quantitative measures of movement quality to track patients longitudinally in their own homes would enable personalized treatment plans and hasten the advancement of promising new interventions. Wearable sensors and machine learning used to quantify patient movement could revolutionize the diagnosis and treatment of movement disorders. The purpose of this dissertation was to overcome technical challenges associated with the use of wearable sensors, specifically Inertial Measurement Units (IMUs), as a …

The Future Is Now In Twisted Coil Polymer Actuators (Tcpa), Ryan Ronquillo

Electronic Theses and Dissertations

This thesis aimed to fabricate and test twisted coiled polymer actuators (TCPA) to understand the mechanical and thermal aspects of this artificial muscle fiber. The purpose of this thesis was to find a linear relationship using the LVDT sensor, fabricating TCPA fibers, and interpreting the data. The project tested whether nylon/polymer could be used as a better artificial muscle fiber.

This research accomplished three goals: (1) designing and fabricating a system capable of creating supercoiled muscle fibers consistently, (2) calibrating the Linear Variable Differential Transformer (LVDT) and Core, and (3) analyzing/interpreting the data of the Twisted Coiled Polymer Actuators (TCPA) …

Hybrid Power Spectral And Wavelet Image Roughness Analysis, Basel White

Electronic Theses and Dissertations

The Two-Dimensional Wavelet Transform Modulus Maxima (2D WTMM) sliding window methodology has proven to be a robust approach, in particular for the extraction of the Hurst (H) roughness exponent from grayscale mammograms. The power spectrum is a computational analysis based on the Fourier transform that can be used to estimate the roughness of a scale-invariant image or region via the calculation of H. We aim to examine how the calculation of H in fractional Brownian motion (fBm) images and mammograms can be improved. fBm images are generated for H ∈ [0.00,1.00] for testing through the previous 2D …

The Study Of Corrosion On Additive-Manufactured Metals., Braydan Daniels

Electronic Theses and Dissertations

The purpose of this study was to investigate and compare the corrosion mechanisms between wrought and additive-manufactured (3D-printed) copper and stainless steel. The experimental procedure consisted of measuring the open circuit potential, electrochemical impedance spectroscopy, linear sweep voltammetry, Tafel analysis, surface topology, and scanning electron microscopy for each metal within salt water, tap water, sulfuric acid, and synthetic body fluid (excluding copper in synthetic body fluid).

Overall, printed stainless steel was more corrosion-resistant than wrought stainless steel in tap water and synthetic body fluid based on OCP, LSV, and surface topology results. Additionally, printed copper was more corrosion-resistant than wrought …

Interrogating Autism From A Multidimensional Perspective: An Integrative Framework., Mohamed T. Ali

Electronic Theses and Dissertations

Autism Spectrum Disorder (ASD) is a condition characterized by social and behavioral impairments, affecting approximately 1 in every 44 children in the United States. Common symptoms include difficulties in communication, interpersonal interactions, and behavior. While symptoms can manifest as early as infancy, obtaining an accurate diagnosis may require multiple visits to a pediatric specialist due to the subjective nature of the assessment, which may yield varying scores from different specialists. Despite growing evidence of the role of differences in brain development and/or environmental and/or genetic factors in autism development, the exact pathology of this disorder has yet to be fully …

Tumor Targeting Gold Nanoparticles For Delivery Of Rna And Dna Oligonucleotide Therapies For Glioblastoma., Nicholas Allen

Electronic Theses and Dissertations

Glioblastoma (GBM) brain tumors are highly aggressive gliomas due to genetic and cellular heterogeneity. Current GBM treatment consists of surgical resection of the tumor combined with radio- or chemo-therapies. While these treatments have increased the life expectancy for GBM patients up to 20 months, they have had little effect on the 5-year survival rate. The complex cellular and genetic composition of the tumor makes current treatments less effective long term. One approach to developing more effective GBM treatments is to customize nanoparticle-based drug delivery systems that can directly target the aberrant gene expression patterns within a particular GBM tumor. Delivery …

Metabolomic Differentiation Of Tumor Core And Edge In Glioma., Mary E. Baxter

Electronic Theses and Dissertations

Glioma is one of the most aggressive forms of brain cancer. It has been shown that the microenvironments differ significantly between the core and edge regions of glioma tumors. This study obtained metabolomic profiles of glioma core and edge regions using paired glioma core and edge tissue samples from 27 human patients. Data was acquired by performing liquid-liquid metabolite extraction and 2DLC-MS/MS on the tissue samples. In addition, a boosted generalized linear machine learning model was employed to predict the metabolomic profiles associated with O-6-methylguanine-DNA methyltransferase (MGMT) promoter methylation.

A panel of 66 metabolites was found to be statistically significant …

Computational Fluid Dynamics Model Of Hyperthermic Intraperitoneal Chemotherapy., Olivia Cooney

Electronic Theses and Dissertations

Hyperthermic intraperitoneal chemotherapy (HIPEC) is a procedure that targets abdominal tumors in the intraperitoneal space. During the procedure, chemotherapy heated to 40-43^oC is cycled through the abdomen for 1 to 2 hours. Although a majority of studies have focused on clinical outcomes, the dynamics of the intra-abdominal flow remain poorly understood. Consequently, it has been difficult to gauge the tumor targeting efficacy, which depends critically on temperature and chemotherapy flow rates. This study establishes a computational framework to evaluate the dynamics of fluid flow during HIPEC, with the goal to enable optimization of tumor drug exposure. A computer …

Modeling Of Transport In Anatomic Respiratory Airways: Applications In Targeted Drug Delivery And Airborne Pathogenic Transmissions, Mohammad Mehedi Hasan Akash

Electronic Theses and Dissertations

This thesis aims to explore the potential of improving the efficacy of drugs for treatment of viral infections by targeting the nasopharynx, which is commonly the first site of infection for many viral pathogens. Currently, intranasal sprays are used, but the standard protocol (“Current Use” or CU) results in suboptimal drug deposition at the nasopharynx. To address this issue, an “Improved Use” or, IU protocol has been proposed, which involves pointing the spray bottle at a shallower angle and aiming slightly towards the cheeks. The IU delivery is also robust to perturbations in spray direction, which highlights the practical utility …

Design And Fabrication Of A Force-Displacement Control Mechanism For Bone-Surgical Tool Testing, Kenneth Nwagu

Electronic Theses and Dissertations

This project focuses on the design and fabrication of an experimental setup for orthopedic-tool testing, tailored for a surgical instrumentation company. The multifaceted project encompasses a literature review, conceptual design, prototyping, and rigorous testing, resulting in a versatile control system capable of assessing various orthopedic tools, including bone drills, saws, burrs, and power handpieces.

Orthopedic surgical procedures (which include cutting and/or drilling into bone) often need to be performed on bones for faster recovery. The drilling and cutting process can cause an increase in temperature at the cutting site which can cause bone necrosis. The tools also need to be …