Open Access. Powered by Scholars. Published by Universities.®
- Discipline
- Keyword
-
- Construction (63)
- Construction material (29)
- Software (12)
- Construction equipment (10)
- Communication (9)
-
- Remediation (9)
- Soil (9)
- Technology (8)
- Safety (7)
- Contamination (6)
- Security (6)
- Automation (5)
- Material (5)
- Pipe (5)
- Productivity (5)
- Sensor (5)
- Building (4)
- Construction technology (4)
- Corrosion (4)
- Emerging construction technology (4)
- Foundation (4)
- Mobile (4)
- Panel (4)
- Real time (4)
- Simulation (4)
- Structural connection (4)
- Assessment (3)
- Bridge (3)
- Composite material (3)
- Concrete (3)
Articles 1 - 30 of 229
Full-Text Articles in Engineering
Spot-R By Triax, Purdue Ect Team
Spot-R By Triax, Purdue Ect Team
ECT Fact Sheets
Triax’s Spot-r system was developed to tackle the construction industry’s unique safety and productivity challenges, stemming from a demonstrated lack of total jobsite visibility and automatically collected, easily accessible field data. Spot-r by Triax combines a proprietary mesh network with sensor technology to record and transmit previously unattainable workforce and equipment location, activity and safety data within a defined area – all in real-time.
The Spot-r network is installed around the site and operates in a 900 MHz network, with a subset using a cellular connection to forward Spot-r sensor data to Triax’s custom, cloud dashboard. In the hazardous construction …
Mdp (Machine Drive Power) Intelligent Compaction Technology, Purdue Ect Team
Mdp (Machine Drive Power) Intelligent Compaction Technology, Purdue Ect Team
ECT Fact Sheets
Caterpillar developed MDP (Machine Drive Power) technology to fill this gap. Rather than an accelerometer and vibratory drum, it uses the principle of rolling resistance to provide indications of soil stiffness. This allows it to perform more reliably on cohesive and granular soils with less variability than accelerometer systems. It also means that the technology can be used on both vibratory and static drum compactors, which are often used on larger sites. While the technology is quite useful on its own, it is even better as a complementary technology to the existing accelerometer-based systems. Contractors who use vibratory soil compactors …
Purdue’S Biowall, Purdue Ect Team
Purdue’S Biowall, Purdue Ect Team
ECT Fact Sheets
Mechanical ventilation, energy recovery ventilation, and infiltration (air that leaks into a building) are commonly used to introduce fresh air. These are all valid approaches, but a living plant-based filter is an innovative complement to these traditional technologies. A Biowall has the potential to improve indoor air quality while reducing the quantity of air needed for ventilation, creating the potential for energy savings. Figure 1 shows a Biowall prototype being evaluated in the ReNEWW House, a research home located near the Purdue University campus (http://www.renewwhouse.com/).
Datumate, Purdue Ect Team
Datumate, Purdue Ect Team
ECT Fact Sheets
Datumate is digitally transforming civil engineering processes used in construction, surveying and infrastructure inspection markets with fully automated, highly precise, cost effective and safe tools. It utilizes state-of-the-art image processing and advanced drones and camera technologies dramatically reducing the amount of time surveying crews spend in the field, speeding up construction progress checks and shortening infrastructure inspection duration, while maintaining survey grade accuracy. The intuitive, simple and automated solutions increase productivity by saving field and office time in civil engineering and inspection projects of roads, intersections, stockpile volumes, topography, piping, industrial facilities, bridges, property surveys, building facades, railways, cellular infrastructure …
Technology To Manufacture Oriented Pvc (Pvc-O) Pipes, Purdue Ect Team
Technology To Manufacture Oriented Pvc (Pvc-O) Pipes, Purdue Ect Team
ECT Fact Sheets
The development of Molecor´s technology, which is based on the application of a Molecular Orientation process, has delivered a significant turning point in the pipelines sector. With this technological development, the company has begun to manufacture TOM® PVC-O pipes, the most eco-friendly pipes on the market. The Molecor technology enabled eradicating many of the existing disadvantages of thermoplastic pipes.
This technology delivers a clear objective; to provide the water industry with a solution for pipes carrying pressurized water in an environmentally friendly, yet cost efficient manner. This also extends a service life compared to pipeline materials currently in use.
The …
Netpoint®, Purdue Ect Team
Netpoint®, Purdue Ect Team
ECT Fact Sheets
The vast majority of construction scheduling software uses a combination of spreadsheets and Gantt charts for developing and depicting Critical Path Method (CPM) schedules. While this paradigm works for the expert scheduler, it is not conducive to collaboration, and it is prohibitively difficult for non-scheduling experts to understand.
NetPoint® provides a dynamic, visual interface conducive to touch and gestural input. Activities are drawn directly on a time-scale and may be placed on the same row or arranged automatically using codes or the WBS. Such control of the presentation makes it easier to communicate the plan to any type of audience. …
Fluid Isolator, Purdue Ect Team
Fluid Isolator, Purdue Ect Team
ECT Fact Sheets
The reliability of concrete infrastructure is vital to ensuring daily life, as well as commerce, can progress without interruption. From the pavement of interstate highways to the driveways and sidewalks in a local neighborhood, concrete is expensive to install and often even more expensive, and intrusive, when it needs to be replaced. Unfortunately, to maintain functionality in winter climates concrete is heavily exposed to deicing salts. This not only affects the roads, driveways, and sidewalks where salt is applied directly, but many other areas such as parking and residential garages where vehicles (and people) will track salt along with water …
Smartvid.Io, Purdue Ect Team
Smartvid.Io, Purdue Ect Team
ECT Fact Sheets
The collection, organization, and retrieval of industrial media is a pervasive challenge that is especially glaring for companies in the AEC industry. Construction projects often generate large volumes of pictures & videos from the field for tracking progress and communicating between engineers, contractors, and subcontractors. It is not uncommon for field personnel to capture hundreds of photos per week on any given jobsite.
Smartvid.io is a cloud-based software solution designed for the specific needs of industrial media. The application’s internal deep-learning engines, collectively nicknamed VINNIE (for ‘Very Intelligent Neural Network for Insight and Evaluation’), use speech and image recognition to …
Hillman Composite Beam (Hcb®), Purdue Ect Team
Hillman Composite Beam (Hcb®), Purdue Ect Team
ECT Fact Sheets
The Hillman-Composite Beam (HCB®), is an innovative structural member for use in highway and railroad bridges as well as marine facilities. The HCB is essentially a lightweight reinforced concrete beam strengthened and protected by a corrosion-resistant and resilient Fiberglass Reinforced Polymer (FRP) shell.
The beam is comprised of three main components, a concrete arch (compression reinforcement), an FRP bottom flange encapsulating steel strands tying the ends of the arch together (tension reinforcement) and the FRP shell. Galvanized Rebar “shear connectors” are used to make the beam composite with the concrete deck in the same manner as pre-stressed concrete beams.
The …
Industrial-Grade Monitoring Solution: Hoistcam, Purdue Ect Team
Industrial-Grade Monitoring Solution: Hoistcam, Purdue Ect Team
ECT Fact Sheets
Safety and productivity are top priorities for contractors and industrial operations. Improving either makes a company more profitable and competitive. Technology advancements that can do both are important for every company to consider. HoistCamTM industrial-grade video monitoring solutions can improve employees’ productivity and workplace safety in the construction industries. HoistCam also improves efficiency of operations and reduces job site accidents resulting in substantial cost savings to a contractor.
HoistCam™ is an integrated, wireless video system. The use of HoistCam eliminates blind lifts, blind spots and can share the live video with anyone, anywhere with solid security and easy control. …
Purdue Ect Report - Fourth Quarter 2016, Purdue Ect Team
Purdue Ect Report - Fourth Quarter 2016, Purdue Ect Team
ECT Fact Sheets
Fourth Quarter 2016
This is a quarterly report from the Purdue ECT.
Road Zipper™, Purdue Ect Team
Road Zipper™, Purdue Ect Team
ECT Fact Sheets
Construction work zones are growing in number around the world. The natural aging of existing roadway infrastructure ensures that more and more maintenance and rehabilitation will be required. Work zones, by their very definition, create two major problems that must be addressed in some way: safety and mobility. In the United States, highway work zones are responsible for almost 25% of all non-recurring congestion and 10% of overall congestion. Vehicle accidents are more common in work zones, and traffic congestion through work zones on urban arterials and freeways is often considered to be “unavoidable." To address these issues, ROAD ZIPPER™ …
Lucidpipe™ Power System, Purdue Ect Team
Lucidpipe™ Power System, Purdue Ect Team
ECT Fact Sheets
In most gravity fed water transmission pipelines, it is desired to reduce excess pressure head to prevent undue strain on a pipeline and lower the incidence of leaks. Normally this is done with pressure reducing valves that essentially burn off this excess pressure as heat. The LucidPipe™ system converts it to low cost electricity thereby removing unwanted pressure and generating energy at the same time - energy that can be put used behind the grid or put back on the grid. The LucidPipe™ system extracts a small percentage of pressure head providing nearly invisible operation allowing water operators to fulfill …
Portable Modular Conveyor, Purdue Ect Team
Portable Modular Conveyor, Purdue Ect Team
ECT Fact Sheets
The Portable Modular Conveyor-Material Placer (PMC) is a quick, easy, dependable and cost effective way to place materials in the limits of the confined grade or work area. This specialized piece of equipment was developed to place concrete in front of a concrete slip form-paving machine. The typical method of placing concrete requires a self-propelled belt placer, which is very expensive to purchase and mobilize to the jobsite. The PMC creates a significant cost savings in labor and equipment with the PMC. It is a direct replacement for conventional material placing equipment, including all in grade belt placing machines. As …
Pipe Express®, Purdue Ect Team
Pipe Express®, Purdue Ect Team
ECT Fact Sheets
By developing Pipe Express® Herrenknecht AG has set new standards for installing pipelines. With this system, no groundwater lowering is necessary and, in comparison with the open construction method, routes can be considerably narrower. This has a positive effect on construction costs. Because it is highly ecological and cost-efficient procedure, the development of this new system is being subsidized by the German Environment Ministry.
The Pipe Express® technology combines the advantages of trenchless installations and open-cut solutions. Pipe Express® can be used in any kind of soft to medium formations. However, the technology exhibits its major benefits …
Post-Tensioned Concrete Shear Wall, Purdue Ect Team
Post-Tensioned Concrete Shear Wall, Purdue Ect Team
ECT Fact Sheets
The post-tension concrete shear wall by Tipping Mar will replace the conventional concrete shear wall in earthquake prone areas in many instances, depending on the height and scale of the building.
Rapid Drying Concrete, Purdue Ect Team
Rapid Drying Concrete, Purdue Ect Team
ECT Fact Sheets
One of the essential problems that are faced during construction is the drying of concrete and the presence of moisture which affects floor coverings that need to be placed. The rapid-drying characteristic in Aridusâ concrete allows for the quick reduction of moisture vapor that travels through the concrete pores of the concrete.
Ap Alternatives Modular Solar Racking, Purdue Ect Team
Ap Alternatives Modular Solar Racking, Purdue Ect Team
ECT Fact Sheets
Solar panels have been used to generate and supply electricity in various applications such as residential and commercial buildings. Therefore, a need for a quicker approach to installation as well as the need to reduce workmanship to speed up the process is needed. Solar racks are developed through the use of automated equipment to “preassemble the racking hardware, pre-install the solar modules, and drive helical anchors into the ground rapidly”. So instead of installing one panel at a time, AP Alternatives has created a new method that uses machines to make the process easier. This new automation of the installation …
Prefabricated Building, Purdue Ect Team
Prefabricated Building, Purdue Ect Team
ECT Fact Sheets
With the continuous demand for construction of new buildings, an easier, more sustainable, energy-efficient and environmentally friendly building method is necessary to save time, energy and cost. Hence, there has been an increasing need for a system such as BROAD sustainable building (BSB). A form of prefabricated building by BROAD Sustainable Building Co., LTD (BSB). It consists of flooring and ceiling, embedded shafts of ventilation, water supply & drainage, electricity and lighting. Other items include pillars, diagonal bracings, doors, windows, walls and sanitary wares, air conditioning, air quality products, lifts, building thermal insulations.
Vertical Icf Wall System, Purdue Ect Team
Vertical Icf Wall System, Purdue Ect Team
ECT Fact Sheets
Traditional ICF systems’ installation is tedious and labor intensive resulting in out of level, bowing, and snaking walls with a significant amount of bracing adding to the cost. ICF (Insulated Concrete Form) walls are a form of structural walls used for construction. Hobbs Vertical ICF system uses less concrete, more recycled material and requires less labor for construction. The furring assemblies and retainer clips of the Hobbs VICF system are made from 100% recycled post-industrial waste.
3d Printing For Bricks, Purdue Ect Team
3d Printing For Bricks, Purdue Ect Team
ECT Fact Sheets
Building Bytes, by Brian Peters, is a project that uses desktop 3D printers to print bricks for architecture. Instead of using an expensive custom-made printer, it uses a normal standard 3D printer which is available for everyone and makes it more accessible and also easier for fabrication.
Analytical System For Planning Of Infrastructure Rehabilitation (Aspire), Purdue Ect Team
Analytical System For Planning Of Infrastructure Rehabilitation (Aspire), Purdue Ect Team
ECT Fact Sheets
ASPIRE stands for Analytical System for Planning of Infrastructure REhabilitation, a decision support system that can be used for all kinds of infrastructure facilities. It is based on a rehabilitation modeling theory developed by Professor Makarand Hastak at Purdue University.
Greenpatch® - Cold Mix Asphalt, Purdue Ect Team
Greenpatch® - Cold Mix Asphalt, Purdue Ect Team
ECT Fact Sheets
GreenPatch® is environmentally friendly cold asphalt that is a direct replacement for traditional cold patch in repairing asphalt pavements. This revolutionary breakthrough in the cold asphalt industry contains no petroleum based softeners such as diesel, toluene, kerosene, and naphthalene found in conventional cold asphalt that pose serious threats to human health and the environment.
Tire Log™, Purdue Ect Team
Tire Log™, Purdue Ect Team
ECT Fact Sheets
The Tire Log™ is a patented innovation made from waste tires with a unique and energy efficient approach to recycling tires. Re-Tread Products (RTP) process takes full advantage of the embedded energy in tires that is wasted in conventional tire recycling that primarily involves the grinding, burying or burning of waste tires.
Bubbledeck, Purdue Ect Team
Bubbledeck, Purdue Ect Team
ECT Fact Sheets
Conventional horizontal concrete slabs are heavy that limit their spans. Enhancement of span results in addition of beams that increases the cost of the structure. Thus, there is a need for a technology that will help in increasing the span by reducing weight of the span. BubbleDeck is a revolutionary construction method that virtually eliminates concrete from the middle of a floor slab between columns that does not perform any structural function, thereby dramatically reducing structural dead weight. BubbleDeck is based on a patented technique - the direct way of linking air and steel.
Mechanical Concrete, Purdue Ect Team
Mechanical Concrete, Purdue Ect Team
ECT Fact Sheets
Mechanical Concrete® is a way of binding crushed stone aggregates together into a load bearing cellular building unit. The Mechanical Concrete® unit can support compressive loads and resist lateral soil pressure.
Super Flex Wall - New Frame System For High Rise Buildings, Purdue Ect Team
Super Flex Wall - New Frame System For High Rise Buildings, Purdue Ect Team
ECT Fact Sheets
The "Super Flex Wall" is a structural frame method newly developed by the Takenaka Corporation, used in combination with a core wall (the earthquake-resistant reinforced concrete wall penetrating through the center of the building from the lower part to the top floor) and a structural control method or with a base-isolation method. Part of the structure is cantilevered from the central core along the periphery of the building.
Carbon Frp Grid Structures For Use In Reinforcing Concrete, Purdue Ect Team
Carbon Frp Grid Structures For Use In Reinforcing Concrete, Purdue Ect Team
ECT Fact Sheets
Carbon FRP Grids are structural reinforcement materials that improve the performance of concrete structures such as insulated wall panels, architectural panels, double tee parking garage tee beams, concrete countertops and other products. The carbon grids can be used in place of welded wire mesh in most structures and is imbedded the same way as a welded wire mesh.
Pvc Stay-In-Place Panel Covers For Tilt-Up And Pre-Cast Construction, Purdue Ect Team
Pvc Stay-In-Place Panel Covers For Tilt-Up And Pre-Cast Construction, Purdue Ect Team
ECT Fact Sheets
Octaform™ stay-in-place concrete forming system is PVC insulated concrete form system. These forms have been used in the industry for various applications to improve the insulation and corrosion resistance of structures. Octaform™ has developed the panel covers so the advantages of PVC stay-in-place concrete forming systems could be applied to tilt-up and pre-cast construction.
Conx Space Frame System, Purdue Ect Team
Conx Space Frame System, Purdue Ect Team
ECT Fact Sheets
Off-site manufacture is one of the key initiatives being used by contractors to achieve these goals. Sandwich Plate System (SPS) Floors deliver a compelling off-site solution for structural floors. Their composite steel panels provide a similar performance to concrete floors at one quarter the weight, 10 - 15% shorter project schedules and broader benefits such as reduced complexity and the elimination of the majority of wet-work above ground level.