Engineering Commons^™

Gravure Printability Of Indium Tin Oxide Nanoparticles On Glass And Pet Films For Applications In Printed Electronics, Dania Awni Alsaid

Dissertations

The advancements in the field of solution processable electro-active materials and their ability to be printed on different substrates have led to the evolution of printed electronics. In this field, electronic components are manufactured with conventional printing methods. Transparent electrodes made from indium tin oxide (ITO) are part of many electronic devices. Currently in industry, highly conductive ITO films are prepared by sputtering. The sputtering and then patterning of ITO films is a sophisticated process that consumes high energy, generates waste and produces films with limited flexibility. Therefore, there is a need to investigate processing methods for creating ITO films …

Optimizing Feeder Bus Network Based On Access Mode Shifts, Zhaodong Huang

Dissertations

The methodology introduced in this dissertation is to optimally find a feeder bus network in a suburban area for an existing rail system that connects the suburban area with the Central Business District (CBD). The objective is to minimize the total cost, including user and supplier costs. Three major access modes (walk, feeder bus, and auto) for the rail station are considered and the cost for all modes makes up the user cost. The supplier cost comes from the operating cost of the feeder bus network. The decision variables include the structure of the feeder bus network, service frequencies, and …

Blind Recognition Of Analog Modulation Schemes For Software Defined Radio, Haifeng Xiao

Dissertations

With the emergence of software defined radios (SDRs), an adaptive receiver is needed that can configure various parameters, such as carrier frequency, bandwidth, symbol timing, and signal to noise ratio (SNR), and automatically identify modulation schemes. In this dissertation research, several fundamental SDR tasks for analog modulations are investigated, since analog radios are often used by civil government agencies and some unconventional military forces. Hence, the detection and recognition of "old technology" analog modulations remain an important task both for civil and military electronic support systems and for notional cognitive radios.

In this dissertation, a Cyclostationarity-Based Decision Tree classifier is …

Graphene-Coated Substrates For Biochemical And Optoelectronic Applications, Amrita Banerjee

Dissertations

Graphene - monolayer or a few layers of graphite -- has proven to possess remarkable properties: large thermal conductivity, mechanical robustness, two-dimensional ultra large electronic mobility, chemical inertness and biochemical compatibility. Realization of some applications has been impeded by lack of a large area deposition method. By using a novel methodology to deposit graphene on solid and perforated substrates, various optoelectronic and biochemical elements have been demonstrated in this thesis: (1) graphene based transistors were fabricated and their characteristics were assessed. The mobility for such transistors exceeded 5000 cm2/V·s, much larger than their silicon based counterparts. Such attribute opens up …

High Aspect Ratio Electrodes For High Yield Electroporation Of Cells, Anil B. Shrirao

Dissertations

Electroporation is a widely used process in cell biology studies. It uses an electric field to create pores on the cell membrane in order to either insert exogenous molecules inside the cells or disrupt the cell membrane to kill the cells. Current micro-fluidic electroporation devices use the planar electrodes situated at the bottom of a microchannel. These planar electrodes i) require a high voltage and ii) generate a nonuniform electric field which result in low yield of the electroporation. The standard silicon microfabrication technologies are not suitable to fabricate non-planar electrodes required to increase the yield of electroporation.

In this …

Inkjet Printability Of Electronic Materials Important To The Manufacture Of Fully Printed Otfts, Sooman Lim

Dissertations

In this study, the inkjet printability of materials important to fabricating OTFTs was researched. In order to understand the jetting evolution of inkjet printed inks, simulations were performed with a nano copper and nano particle silver ink. To predict the inkjettability of the nano copper ink, Z and Oh numbers at different temperatures were determined. The results from the simulation studies were compared to experimental results obtained using a Dimatix inkjet printer. For the semiconductor ink, the inkjet printability of two organic semiconductors, P2TDC17FT4 (poly[(3,7-diheptadecylthieno[3,2-b]thieno[2',3':4,5]thieno[2,3-d]thiophene-2,6-diyl)[2,2'-bithiophene]-5,5'-diyl] dissolved in 1,2-dichlorobenzene and P3HT (poly-3 hexylthiophene) were compared to determine the relationship between drop …

Adaptive Security-Aware Scheduling For Packet Switched Networks Using Real-Time Multi-Agent Systems, Ma'en Saleh Saleh

Dissertations

Conventional real-time scheduling algorithms are in care of timing constraints; they don’t pay any attention to enhance or optimize the real-time packet’s security performance. In this work, we propose an adaptive security-aware scheduling with congestion control mechanism for packet switching networks using real-time agentbased systems. The proposed system combines the functionality of real-time scheduling with the security service enhancement, where the real-time scheduling unit uses the differentiated-earliest-deadline-first (Diff-EDF) scheduler, while the security service enhancement scheme adopts a congestion control mechanism based on a resource estimation methodology.

The security service enhancement unit was designed based on two models: singlelayer and weighted …

A Discriminative Imaging-Based Framework For Road Sign Condition Assessment Using Local Features And Svm Classifiers, Jafar Jameel Abukhait

Dissertations

Transportation departments are required to monitor the condition of road signs through appropriate condition assessment mechanisms to improve road safety and keep drivers properly informed. Typically, these mechanisms include visual inspection or specialized equipment such as retroreflectometers. These methods are costly, tedious, and risky since they need direct contact with road signs. Efforts to use emerging computer vision techniques for the assessment of road signs condition combined with the availability of road data inventories are allowing the automation of these processes, thus easing the inspection process, reducing costs of equipment, and decreasing the risks associated with the need for maintenance …

Design, Modeling And Fabrication Of Shear Mode Bulk Acoustic Wave Sensor As A Potential Biosensor, Chi-Jung Cheng

Dissertations

There has been an increasing interest in development of thin film bulk acoustic wave resonator (FBAR) devices for chemical and biological sensing applications in the environmental and biomedical industries. The zinc oxide (ZnO) thin film based FBAR devices provides attractive advantages, such as high resonant frequency, small size, and rapid response. Typically, the ZnO-based FBAR devices are operated in the longitudinal wave mode where the ZnO crystallites are perpendicular to the substrate. In gaseous environments, the longitudinal mode FBAR device provides high sensitivity for mass sensing. However, the longitudinal wave mode is adversely affected when used in liquid environments because …

Driver Behavior Classification And Lateral Control For Automobile Safety Systems, Jing Yang

Dissertations

Advanced driver assistance systems (ADAS) have been developed to help drivers maintain stability, improve road safety, and avoid potential collision. The data acquisition equipment that can be used to measure the state and parameter information of the vehicle may not be available for a standard passenger car due to economical and technical limitations. This work focuses on developing three technologies (longitudinal tire force estimation, driver behavior classification and lateral control) using low-cost sensors that can be utilized in ADAS.

For the longitudinal tire force estimation, a low cost 1Hz positioning global system (GPS) and a steering angle sensor are used …

Advanced Intelligent Control And Optimization For Cardiac Pacemaker Systems, Wei Shi

Dissertations

Since cardiovascular diseases are major causes of morbidity and mortality in the developed countries and the number one cause of death in the United States, their accurate diagnosis and effective treatment via advanced cardiac pacemaker systems have become very important. Intelligent control and optimization of the pacemakers are significant research subjects. Serious but infrequently occurring arrhythmias are difficult to diagnose. The use of electrocardiogram (ECG) waveform only cannot exactly distinguish between deadly abnormalities and temporary arrhythmias. Thus, this work develops a new method based on frequency entrainment to analyze pole-zero characteristics of the phase error between abnormal ECG and entrained …

Investigation Of The Fracture Phenomena During The Milling Process Of Inorganic Particulates And Brittle Fracture Of Polymer Composites Using Fractal Theory, Zheng Qian

Dissertations

This dissertation investigates the applicability and usefulness of applying Fractal mathematics and to the fracture of brittle particulates in Fluid Energy Mill devices, and in particular quantifying the resulting power law particle size distributions, examining the Surface Fractal Dimension of milled particulates, and relating the Izod Impact Strength values of composites of polypropylene and Calcium carbonate particulates which are large un-milled, small milled, as well as small and produced by the simultaneous milling and coating with nano-silica to the Surface Fractal Dimension of the impact fracture surfaces.

First, the dissertation examines the behavior of un-coated and micron-sized wax pre-coated particulates …

Inkjet Printing Of Resistive-Type Humidity Sensor For Harsh Environments, Hamed Kazerani

Dissertations

A flexible resistive-type humidity sensor for harsh environments is successfully designed and fabricated by an inkjet printing method using a Dimatix materials printer (DMP-2800 series from Fujifilm). Construction of the sensors is based on inkjet printed interdigitated silver electrodes on a polyimide flexible substrate along with an inkjet printable polyaniline (PANi) as humidity sensitive material. A copolymer of ethylene and vinyl alcohol (EVOH) is used as sensor protective coating. Double strand water- soluble PANi ink is synthesized by polymerization of aniline monomers with poly(4- styrenesulfonic acid) (PSSA) as a template.

Manufactured devices showed high sensitivity (/% @ 45%RH) to humidity …

The Incorporation Of Electrohydrodynamics And Other Modifications Into A Dry Spinning Model To Develop A Theoretical Framework For Electrospinning, Yuki Imura

Dissertations

The objective of this research was the development of a mathematical model of the electrospinning process using dry spinning modeling principles as a basis. This model is directed at the identification of parameters which influence final fiber characteristics, e.g., solvent concentration, temperature, spin line tension, and electric field. Preliminary computer simulations were performed; however, the generated data was inconclusive and was determined to be due in part to the complexity of the modeled system and the subsequent computational difficulties encountered. Although a comprehensive computational model of the electrospinning process has not yet been demonstrated, the theoretical development that was undertaken …

Virtual Reality Visual Feedback And Its Effect On Brain Excitability, Soha Saleh

Dissertations

This dissertation examines manipulation of visual feedback in virtual reality (VR) to increase excitability of distinct neural networks in the sensorimotor cortex. The objective is to explore neural responses to visual feedback of motor activities performed in complex virtual environments during functional magnetic resonance imaging (fMRI), and to identify sensory manipulations that could further optimize VR rehabilitation of persons with hemiparesis. In addition, the effects of VR therapy on brain reorganization are investigated. An MRI-compatible VR system is used to provide subjects with online visual feedback of their hand movement. First, the author develops a protocol to analyze variability in …

Energy Harvesting-Aware Design Of Wireless Networks, Fabio Iannello

Dissertations

Recent advances in low-power electronics and energy-harvesting (EH) technologies enable the design of self-sustained devices that collect part, or all, of the needed energy from the environment. Several systems can take advantage of EH, ranging from portable devices to wireless sensor networks (WSNs). While conventional design for battery-powered systems is mainly concerned with the battery lifetime, a key advantage of EH is that it enables potential perpetual operation of the devices, without requiring maintenance for battery substitutions. However, the inherent unpredictability regarding the amount of energy that can be collected from the environment might cause temporary energy shortages, which might …

Adsorption Of Particles On Fluid-Liquid Interfaces, Bhavin Dalal

Dissertations

Particles floating on fluid-liquid interfaces are of considerable interest because of their importance in a range of physical applications and biological processes, e.g., self-- assembly of particles at fluid-fluid interfaces resulting in novel nano structured materials, stabilization of emulsions, formation of pollen and insect egg rafts, etc. The aim of this dissertation is to explore the mechanism by which particles are adsorbed at fluid-liquid interfaces. It is shown that the inertia of a particle plays an important role in its motion in the direction normal to a fluid-liquid interface, and in determining the particles adsorption trajectory and orientation in …

Synthesis, Molecular And Solid State Structures, And Magnetic Properties Of Sandwich Lanthanide Phthalocyanines Lacking C-H Bonds, Wycliffe A. Graham

Dissertations

A new class of sandwich phthalocyanine (Pc) compounds without C-H bonds was synthesized and characterized. They are the bis[octakis(perfluoro i-C₃F₇) octakis(perfluoro)phthalocyaninato(2−)]M(III) complexes, formulated as (F₆₄Pc)₂MH, M = Tb, Dy, Lu, Y. Single molecular magnetic (SMM) behavior in the (F₆₄Pc)₂TbH and (F₆₄Pc)₂DyH complexes was confirmed through slowed relaxation response of their magnetization in an applied time varying magnetic field during alternating current (AC) magnetic testing in the range 2 - 50 K. The energy barrier to magnetic reversal, Δ = 215 cm^-1 and …

Auger-Mediated Processes And Photoluminescence In Group Iv Semiconductor Nanostructures, Nikhil Modi

Dissertations

Group IV semiconductors (Si, Ge) are inefficient light emitting materials due to their indirect bandgap structure. Nanostructures of Si, Ge, and SiGe however, have shown relatively high photoluminescence (PL) quantum efficiency (QE) at low carrier concentrations. At higher carrier concentrations, the PL QE of these nanostructures is drastically reduced due to the onset of a fast non-radiative process attributed to Auger recombination. Moreover, this onset occurs earlier in structures with reduced physical dimensions, than in bulk material. The study of Auger-mediated processes in group IV nanostructures is therefore critical to understanding the physics of carrier recombination and photonic device limitations. …

Rational Design Of Hydrogen-Free Catalytic Active Sites, Andrei Ioan Loas

Dissertations

Materials that are organic-based and exhibit oxidative catalytic activity, including free-radical pathways, while being refractory to the activated oxygen species are not known. The synthesis of several classes of such materials, their electronic and structural characterizations as well as catalytic properties are reported. Their rational molecular design and biologically inspired reactivity are based on enzymatic active sites, which are reengineered into robust metal-organic fluoroalkylated scaffolds that, for the first time, exhibit structural asymmetry and tunable π-π interactions both in solution and solid state. In these complexes, labile C-H bonds are replaced with chemically and thermally resistant C-F bonds to create …

Vector Coprocessor Sharing Techniques For Multicores: Performance And Energy Gains, Spiridon Florin Beldianu

Dissertations

Vector Processors (VPs) created the breakthroughs needed for the emergence of computational science many years ago. All commercial computing architectures on the market today contain some form of vector or SIMD processing.

Many high-performance and embedded applications, often dealing with streams of data, cannot efficiently utilize dedicated vector processors for various reasons: limited percentage of sustained vector code due to substantial flow control; inherent small parallelism or the frequent involvement of operating system tasks; varying vector length across applications or within a single application; data dependencies within short sequences of instructions, a problem further exacerbated without loop unrolling or other …

Design And Automated Operation Of A Condensation-Induced Depressurization System, Fen Du

Dissertations

Typical examples of the use of the vacuum environments in industry include vacuum coating, vacuum drying, vacuum packing, vacuum casting, vacuum heat treatment, vacuum cooling for food storage and leakage detection. Most of these applications require a comparatively small volume of vacuum environment. However, there are also many applications where enormous vacuum chambers are needed. For example, a large vacuum chamber is used to simulate the conditions of space.

This study investigates the design and the automated operation of a vacuum generation system based on the idea of the condensation-induced depressurization with prefilled condensable medium in a confined, adiabatic chamber. …

Desalination Of Brine And Produced Water By Membrane Distillation At Lower As Well As Higher Temperatures And Pressures, Dhananjay Singh

Dissertations

Direct contact membrane distillation (DCMD)-based desalination process is a thermally- driven separation process where a hydrophobic microporous membrane separates a hot brine feed and a cold distillate which condenses the water vapor from the hot brine passing through the membrane pores. So far, DCMD has been explored for hot brines and other aqueous solutions below 100oC. For feed solutions above 100oC, DCMD has an extra advantage over other conventional separation processes like reverse osmosis (RO) which requires cooling of the feed solution costing additional energy; further, RO can not utilize the heat available in the feed solution. Produced water obtained …

Image Statistical Frameworks For Digital Image Forensics, Patchara Sutthiwan

Dissertations

The advances of digital cameras, scanners, printers, image editing tools, smartphones, tablet personal computers as well as high-speed networks have made a digital image a conventional medium for visual information. Creation, duplication, distribution, or tampering of such a medium can be easily done, which calls for the necessity to be able to trace back the authenticity or history of the medium. Digital image forensics is an emerging research area that aims to resolve the imposed problem and has grown in popularity over the past decade. On the other hand, anti-forensics has emerged over the past few years as a relatively …

Upper Extremity Rehabilitation Using Interactive Virtual Environments, Qinyin Qiu

Dissertations

Stroke affects more than 700,000 people annually in the U.S. It is the leading cause of major disability. Recovery of upper extremity function remains particularly resistant to intervention, with 80% to 95% of persons demonstrating residual upper extremity impairments lasting beyond six months after the stroke. The NJIT Robot Assistive Virtual Rehabilitation (NJIT-RAVR) system has been developed to study optimal strategies for rehabilitation of arm and hand function. Several commercial available devices, such as HapticMaster™, Cyberglove™, trakSTAR™ and Cybergrasp™, have been integrated and 11 simulations were developed to allow users to interact with virtual environments. Visual interfaces used in these …

Energy-Efficient Multi-Criteria Packet Forwarding In Multi-Hop Wireless Networks, Komlan Egoh

Dissertations

Reliable multi-hop packet forwarding is an important requirement for the implementation of realistic large-scale wireless ad-hoc networks. However, packet forwarding methods based on a single criterion, such as the traditional greedy geographic forwarding, are not sufficient in most realistic wireless settings because perfect-reception-within-rangecannot be assumed. Furthermore, methods where the selection of intermediate relaying nodes is performed at the transmitter-side do not adapt well to rapidly changing network environments. Although a few link-aware geographic forwarding schemes have been reported in the literature, the tradeoffs between multiple decision criteria and their impact on network metrics such as throughput, delay and energy …

Error Estimation Techniques To Refine Overlapping Aerial Image Mosaic Processes Via Detected Parameters, William Glenn Bond

Dissertations

In this paper, I propose to demonstrate a means of error estimation preprocessing in the assembly of overlapping aerial image mosaics. The mosaic program automatically assembles several hundred aerial images from a data set by aligning them, via image registration using a pattern search method, onto a GIS grid.

The method presented first locates the images from a data set that it predicts will not align well via the mosaic process, then it uses a correlation function, optimized by a modified Hooke and Jeeves algorithm, to provide a more optimal transformation function input to the mosaic program. Using this improved …

Cerebral Spasticity Modeled As Disorded Equilibrium Point Control, Darnell Simon

Dissertations

Spasticity is a highly complex phenomenon, which has not been defined in precise and quantifiable terms. Although the muscle stretch reflex is thought to play an important role in spasticity generation, the pathophysiologic basis of spasticity is not completely understood. A valid measure of spasticity is one that is chosen within the context of a theory describing the physiological mechanisms underlying the control of posture and movement in healthy individuals and possible impairments of these mechanisms leading to motor disorders. This research’s goal was to determine the role of stretch reflex threshold in the regulation of impaired motor control through …

Source Localization Via Time Difference Of Arrival, Ciprian Romeo Comsa

Dissertations

Accurate localization of a signal source, based on the signals collected by a number of receiving sensors deployed in the source surrounding area is a problem of interest in various fields. This dissertation aims at exploring different techniques to improve the localization accuracy of non-cooperative sources, i.e., sources for which the specific transmitted symbols and the time of the transmitted signal are unknown to the receiving sensors. With the localization of non-cooperative sources, time difference of arrival (TDOA) of the signals received at pairs of sensors is typically employed.

A two-stage localization method in multipath environments is proposed. During the …

Target Localization In Passive And Active Systems : Performance Bonds, Vlad Mihai Chiriac

Dissertations

The main goal of this dissertation is to improve the understanding and to develop ways to predict the performance of localization techniques as a function of signal-to-noise ratio (SNR) and of system parameters. To this end, lower bounds on the maximum likelihood estimator (MLE) performance are studied. The Cramer-Rao lower bound (CRLB) for coherent passive localization of a near-field source is derived. It is shown through the Cramer-Rao bound that, the coherent localization systems can provide high accuracies in localization, to the order of carrier frequency of the observed signal. High accuracies come to a price of having a highly …