Engineering Commons^™

Development Of Flexible Hybrid Electronics For Sterilization And Structural Health Monitoring Applications, Arnesh Kumar Bose

Dissertations

No abstract provided.

Development And Characterization Of Nano Nickel-Based Conductive Inks For Flexographic Printing Of Electronics And New Interpretations Of Surface Energies Of Solids, Bilge Nazli Altay

Dissertations

Traditional printing technologies and conductive/functional inks have been integrated to print electronic devices and circuits on really think, lightweight and flexible materials in a time and cost-effective manner. Printing is an additive manufacturing technology, which selectively deposits materials only where needed to produce a wide range of devices including sensors, smart packaging, solar panels, batteries, light sources and wearable electronics. Therefore, it greatly reduces the number of required steps for manufacturing as well as the amount of waste generated relative to conventional electronic manufacturing. However, the process requirements and ink formulations to print electronics differ from graphic printing; therefore, the …

Screen Printed Moisture Sensor On Barrier Coated Sbs Board: The Characterizations Of The Hemicellulose-Based Biofilms And Their Applications For Smart Packaging, Ruoxi Ma

Dissertations

Fiber-based packaging materials have many advantages over their petroleum-based plastic competitors, such as sustainability, recyclability and stiffness/weight ratio. However, the poor barrier properties and sensitivity towards moisture are the main challenges for their extended use. Therefore, there has been a need to provide a biodegradable and biocompatible biopolymer packaging material with improved barrier properties for food and pharmaceutical packaging. Also, the moisture loss/gain problem causes a lot of waste every year. Therefore, there is a need of better tracking and sensing methods attached to the package in order to control the moisture level along the supply chain. To accomplish these …

Fate Of Conductive Ink Pigments During Recycling And Landfill Deposition Of Paper-Based Printed Electronics, James Edward Atkinson

Dissertations

Printed electronics (PE) are being developed as an alternative to traditional electronics, due to the more efficient use of materials and lower cost of production. The overall goal of this study was to understand how metallic pigments in conductive inks in PE are partitioned during landfill disposal and paper recycling conditions. The purpose is to assess the potential environmental impacts of PE landfilling in terms of metal leaching and to help develop new strategies for sequestering metallic ink components while paper-based PE are subjected to conventional paper recycling methods. The objective of this research is to study the fate of …

Novel Stretchable Printed Wearable Sensor For Monitoring Body Movement, Temperature And Electrocardiogram, Along With The Readout Circuit, Ali Eshkeiti

Dissertations

Conformal and stretchable wearable sensors provide vital real time information about individual’s health conditions. In this work, Traditional printing methods are used for fabrication of stretchable and wearable sensors which can be mounted on the human skin for the purpose of health tracking. In addition, screen printing technology was utilized to develop printed and flexible electronic circuit board which can be used as a readout circuit along with fabricated wearable sensors. The dissertation is organized and pursued in three projects.

In the first project, screen printing was used to fabricate multi-layer PCBs using printed deposited materials on three distinct substrates. …

Printing Functional Electronic Circuits And Components, Ahmed Tausif Aijazi

Dissertations

The purpose of this study was to investigate the challenges in printing reliable multilayer flexible circuits, devices and components. Gravure was used as the primary printing process for this work, but due to some limitations of gravure, other printing methods were also investigated. At first a systematic study was done to determine the optimum parameters for the gravure printing of sub 50 micron lines. Commercially available silver nanoparticle inks were printed on a lab scale gravure printer, Accupress®. The highest resolution line that was electrically conductive was 36μm wide. The 9μm, 18μm and 27μm lines were printed but were not …

Lntegration Of Conventional Lithography And Printing Processes As A Key Enabling Technology For Printed And Flexible Sensing Systems, Binu Baby Narakathu

Dissertations

Sensors, which are used ubiquitously in a wide variety of applications, are revolutionizing the already ever-changing world we live in by providing real-time information about our surroundings. This dissertation focuses on the integration of conventional photolithography and printing processes as a key enabling technology for printed and flexible sensing systems.

Initially, an efficient opto-electrochemical sensing system, for the dual detection of heavy metal compounds was successfully developed. A novel microfluidic flow cell, with a reservoir volume of 25 μl, was designed and fabricated using acrylic. An electrochemical sensor with gold (Au) interdigitated electrodes (IDE) on a glass substrate was photolithographically …

Inkjet Printability Of Electronic Materials Important To The Manufacture Of Fully Printed Otfts, Sooman Lim

Dissertations

In this study, the inkjet printability of materials important to fabricating OTFTs was researched. In order to understand the jetting evolution of inkjet printed inks, simulations were performed with a nano copper and nano particle silver ink. To predict the inkjettability of the nano copper ink, Z and Oh numbers at different temperatures were determined. The results from the simulation studies were compared to experimental results obtained using a Dimatix inkjet printer. For the semiconductor ink, the inkjet printability of two organic semiconductors, P2TDC17FT4 (poly[(3,7-diheptadecylthieno[3,2-b]thieno[2',3':4,5]thieno[2,3-d]thiophene-2,6-diyl)[2,2'-bithiophene]-5,5'-diyl] dissolved in 1,2-dichlorobenzene and P3HT (poly-3 hexylthiophene) were compared to determine the relationship between drop …